Z87-G45 not compatbile with U14S using all 4 DIMM's?

So after installing the U14S, the fan is touching the 1st RAM heatsink. Isn't the U14S suppose to be compatbile? Am I doing something wrong? If I try to squeeze the ram, it is visibly pushed (the space between the 1st and 2nd is smaller than the space between 2-3-4th ram)
http://imgur.com/DCSzWTb
http://imgur.com/Vl11yYH

Quote from: badboy2k on 02-May-14, 05:53:30
most people with that cooler and RAM have the fans reversed so one is on the I/O side (flipped around as a pull)  and the one in the reversed! so technically it will work but not in stock fan layout!
How is that making any difference? The thickness would be the same
Quote from: Bernhard on 02-May-14, 05:58:58
Is that low profile RAM?
Ripjaws X
I'm thinking I might be trimming the fan since it looks like 2 more mm's should do it. What's the best tool to trim the plastic?

Similar Messages

  • I have a blackberry and sceen light dont wok and it get hot and turns off and it dont want to down load what can i do it new and i im not happy with it at all but im stuck with it what can i do

    i have a blackberry and im not happy with it at all its gets hot and it burns ur hands and the scern is black and it turns off and dont want to down load i hate is phone and i just got in 3mon ago im now stuck with it

    Hi and Welcome to the Community!
    Given that it's only 3 months old and was brand new, you are covered by warranty. You need to take it to whoever you bought it from as they are the servicer of your warranty.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Text on ipad not syncing with iPhone at all times

    text on ipad not syncing with iPhone at all times

    Same with me. It used to be that Books would sync with my iPhone, but it seems that since IOS 5 came out they don't sync any more. Everything else syncs fine through iCloud; iPhone 4s & IPad 2.

  • I have a ipad 2 and it does not connect with safari using 3G

    I have a ipad 2 and it does not connect with safari using 3G

    Sorry to hear you are having issues, but there are 2 ways you can print from that device.
    The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
    The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • I recently downloaded Mountain Lion and am not happy with it at all.  Is it possible to get rid of it and return to the OS X version that I had previously?

    I recently downloaded Mountain Lion and am not happy with it at all.  Is it possible to get rid of it and return to the OS X version that I had previously?

    rwilkof wrote:
    I recently downloaded Mountain Lion and am not happy with it at all.  Is it possible to get rid of it and return to the OS X version that I had previously?
    Yes, just reinstall from your Time Machine backup you made before updating to Mountain Lion.
    Cheers
    Pete

  • [nForce] Can I use all 3 dimm slot in K7N2 Delta 2?

    First of all, i would like to thanks to all the MSI users that read this and hope that some of you could help me my question.
    as we all know, this mobo got 3 dimm slot (2 purple and 1 green). my question is, can is use all 3 dimm at one time?
    rite now i have 2 stick of 256 Kingston PC 2700. if i want to buy another stick and put it in the other available slot,
    - which type of ram can i use. must it be the same Kingston (333MHz) with the same ram size (256MB) or
    - must it be 512MB.. or
    - can it be others speed (like ddr400)
    - or others type of ram like Apacer, corsair etc....
    Thanks in advance. hope there is some one who can help me with this. Thanks again

    Quote from: Frankenputer on 07-April-05, 00:24:31
    HUH? 2 x 256 and 1 512? 3 sticks? I don't believe that would be dual channel. You need paired sticks of the same size, speed, makeup to run in dual channel as far as I know. You could run your 2 sticks of 256 in dual channel if you put one in 1st slot and the other in the 3rd, or you can get 2 sticks of 512, one in the 1st and the other in the 3rd slot, to get a full gig in dual channel.
    If you get a 512 and place it in the 3rd slot and have your two 256s in the other 2 slots, they'll be running in single-channel mode. At least, that's my understanding.
    Yes, Wonka is correct it will run in dual in that configuration!
    Cheers

  • Why is the newest version of Firefox not compatible with Java ? All my java extensions are disabled !

    I can't be entirely certain of the origin of this issue, but I've tried everything I can think of and the only thing I can nail down is that Firefox 6.0.1 is incompatible with Java. All of my extensions have been disabled without the option of even trying to enable them.
    Now for the ACTUAL problem...this affect my Google/GMAIL experience and I use GMAIL for my business! The calendar used to display various mailboxes with different colours to identify different types of individuals and the Google Menu Bar on their homepage is not black, like it should be, it is TRANSPARENT with blue lettering. I can read the menu bar just fine, but the GMAIL thing is kind of important to my business!
    I've tried the GMAIL forums to no avail...I've tried to uninstall Java [it wouldn't...just crashed and said there was an error...]. I even re-installed Java, but nothing changed!
    I have also tried other browsers and they do the same thing, so I can't just pin it on Firefox, but I am hoping that someone here will have a good, working solution for me.
    Thanks,
    Dave

    OK, I'll try removing all of the extensions but that doesn't explain why my GMAIL and various other JAVA related [I'm assuming] things are not displaying properly. I even went as far as to replace my video card and download the most up to date drivers...still no change, but I will try removing all of the disabled extensions.
    Thanks and if anyone has any other ideas I'd love to hear them
    Dave

  • Does ZoomSearch work with RoboHelp using all "accessible" settings?

    Mr. Grainge, have been taking a look at your expertise in other discussions and would greatly appreciate your input regarding:
    Am using RoboHelp 8.0.2 to develop an Online Help system.
    All "accessible" options for Section 508 and W3C compliance are set when system is generated.
    When I generate the system, the Search tab on the navigation panel shows lots of "partial" words or parsed characters and seems to also include partial URL links and even the names of image files (or parts of the file names) in the search results.
    Unfortunately, I have to use all the accessibility options provided by RoboHelp. It really makes the output ugly and not very appealing, but gotta.
    Am attaching an image of the Search panel and what a mess it is with partial name, image file names included, and partial words being identified a "full" words. I could not get this function to work.... I tried repeatedly to get an image to upload in various graphic formats, but it would NEVER UPLOADED.
    Appreciate any help you can provide.... I would certainly use ZoomSearch to provide a much more enhanced Search capability.... My only concern is that incorporating the output from ZoomSearch might not be "accessible" compliant.

    ZoomSearch will work as the Search page is just another topic. Whether or not the page and the results will meet accessibility requirements is another issue and one that I have not investigated. Look at the search page on my site as that is what you will get although the fonts and colours can be customised. ZoomSearch is from http://www.wrensoft.com and maybe their help pages will cover accessibility. The crew there is very helpful.
    No image was attached. You have to insert images using the camera icon that is available when you click Reply.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Thunderbolt to VGA Adapter not working with SMART board all of a sudden?

    I was wondering if anyone had any suggestions on getting my classroom's (I'm student teaching) SMART board connected to my macbook pro (13 in).  Two days ago I tested the setup I had, Mini-DVI to VGA adapter, Mac OS X SMART software suite and it worked flawlessly.  Today I try the setup and although the SMART board recognizes my macbook via usb, the projector does not display anything.  System preferences does not even recognize the projector as an external monitor.  When I plug in my Mini-DVI to VGA adapter (already attached to the VGA cord from the SB) the screen flashes black and goes back to normal.  Official work from SMART technologies is there is no supported adapters for connecting a macbook to a SB but I have seen numerous threads about this setup working and like I said it was previously working fine. Any suggestions on what to try next? I was thinking of dual booting to an older version of OS X. Thanks.
    Specs:
    MacBook Pro 13 in
    2.4 GHz Intel Core 2 Duo
    4 GB 1067 MHz DDR3
    10.9.1

    If your laptop is not connected to power (i.e., plugged in to a wall), try plugging it in.  It is not uncommon for a laptop to send the VGA signal out with less power when it is on battery power.  I've seen this fix this problem, at least, dozens of times.
    Try connecting the VGA cable to your adapter while the smart board display is on THEN plug the adapter in to your computer.
    Also, try connecting the VGA+Adapter to your mac before booting it (or connect the macbook to the vga cable and then reboot the macbook).  I've seen this work with macbooks using vga on projectors (or other external displays running through longer cables or crestron/extron/whatever switching equipment) many many times too.
    If these fail, get your campus AV (or IT) people involved.  We have often found that a damaged cable or long run needing amplification will work with some computers but not with others.  It could be that the cable running from the smart board is somewhat sketchy.
    Also, have you attempted to connect your macbook to any other display since starting to have the issue?  A bad dongle (dp to vga adapter) isn't rare.  I have a bad one sitting on my desk at this very moment.
    One last thing you can try, this works for some:
    Shut of the mac
    Connect it to the smart board (i.e, connect the cables)
    Turn on the mac and then close the lid
    This *may* boot the computer on the external dispaly (smart board)
    Open the lid before it comes to the login screen.
    Hopefully one of these suggestions helps.

  • HP Envy 110e printer (D411a) will not install with me using Windows 8 Consumer Preview. I need help

    Just pick up the new HP Envy D411a printer, i set up with my wi-fi and all was going well until i put the disk in my PC . Just to find out that my NEW printer will not work with the Windows 8 Consumer Preview . I need help with this or until UP update the new printer to work with Windows 8, which will be on the market soon. Can some one please HELP ME

    Available now is print and scan capability that HP worked with Microsoft to include into Windows 8.
    The Printer Install Wizard can provide you additional information:
    http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...
    If I have helped you solve your issue please mark it as solved .....
    (I am an HP employee)

  • Ipod touch will not sync with itunes using windows 7 makes everything freeze

    My itouch has not been able to sync with itunes using windows 7 for a couple of days.  Everything just freezes and I have to reboot my laptop. I have reinstalled itunes and deleted the backup of the ipod but nothing is working.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Audio not sync with video using photo booth since os moutain lion was installed

    Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?

    I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
    Good luck,
    Clinton

  • Original Wireless Mouse will not pair with computers using OSX (10.6.2)

    I have two original Apple Wireless Mouses (Mice?) [Model No: A 1015 EMC No: 1938] neither of which am I able to pair with either of my Macs (Mac Pro & MacBook Pro). I believe there is some kind of incompatibility issue with these devices and the Snow Leopard OS.
    When I try to set up the wireless mouse using Bluetooth Setup Assistant a connection is established, but the pairing attempt is unsuccessful. I have tried using all of the Passcode Options, but each time the pairing attempt is unsuccessful.

    I am having the exact same issue. After switching batteries last week, I was no longer able to pair my original Wireless Mouse (model A1015) either. I'm also running 10.6.2 and never had this problem before.
    When setting up the mouse, it does appear in the Bluetooth connection panel, correctly says "Connecting" but then stalls in the "Connected" phase and then times out with "The pairing attempt was unsuccessful".
    I tried restarting my Mac and leaving the batteries out of the mouse for a day, to no avail. I just repaired my Apple Wireless Keyboard successfully, so this seems to be mouse-specific.

  • HT5934 My ios 7 download did not come with siri at all. what can I do to download it?

    *I downloaded IOS 7and it did not come with SIRI. How can I download that to my phone?

    This is correct.
    Why did you think it would come with Siri?
    Iphone 4 will never have Siri.

  • Glass Not Flush With Bezel On All Sides

    Like the battery in My MacBook, the glass panel on the front of my iPhone is not Flush with both sides of the bezel. On the right side it meets perfectly smooth with the edge, on the left side it dips slightly creating a little lip with the bezel. It's not huge, but it's there.
    Just wondering if this is typical of iPhone construction or if I need to take it into an Apple Store for a swap. Like I said, I see it in almost every MacBook I've seen, but then the battery is designed to be removable and one would expect it to be an imperfect fit. The iPhone is a sealed enclosure with no user accessible parts. I realize no manufacturing process is perfect, but is this something I should even try to get Apple will likely to replace or is it like the stuck pixel LCD problem of the past?

    It's defective. Take it back.
    I have both a macbook and a iPhone, both perfect.

Maybe you are looking for

  • Open sales order and back orders

    hi , what is the difference between open sales order and back orders? thanks ganesh

  • Problem in sending XML input as String in BPEL

    Hi, We have a BPEL flow (assign, invoke, assign) which takes an XML input as String. <RegisterCustomerOnVAS><CustomerID>100</CustomerID><MSISDN>9999999</MSISDN><CustomerName>sanjeev</CustomerName><customerInfo>new user</customerInfo></RegisterCustome

  • Report 10g print preview problem

    hi, i use report 10g (HTMLCSS) when send to printer i have problems as: 1- page stream should not show to print preview 2- page sizing changed in print preview but when send directly to printer without page stream i have not problem with page sizing

  • Mail abruptly quit working

    I am not sure where to begin though the mail service on my server appears to be running but is delivering NO mail to any client. Outbound mail appears to leave but never arrives? I know that it is Halloween but this isn't a Halloween joke. Thank you!

  • Schema Bind View

    What is schema bind view? Can anyone explain with suitable example ? When we need schema bind view how its helpful for performance