Z87-G45 USB ports disconnecting / not recognized

I am having some frustrating issues with usb devices.  The only USB device that seems to work is my mouse plugged into the back 3.0 port.
Computer is 2 weeks old and I originally loaded windows 8.1 pro from USB on a fresh install and it worked great and was working fine until a few days ago.   I noticed the issue started when I turned the computer on from a power save and the bios got stuck on a black page with the code "9c".  When usb devices were unplugged this went away.  If i plug them back in they won't stay connected and if I restart "9c" error code returns.
At one point I was able to have my 2gb seagate USB drive + a 16GB flash drive + a logitech webcam plugged in and all worked beautifully. 
Something changed - now if I plug anything into the front usb ports I just keep getting windows reconnect/disconnect dings.  If i plug into the back USB ports I am getting "USB device not recognized" and other errors.   Keyboard works fine as its plugged into p2p port and not USB.
My bios is up to date and also there are no exclamation marks in the device manager.
I have tried changing the power management settings,
uninstalling all USB devices in Device Manager
unplugging/re installing logitech g400 mouse and drivers
I reinstalled chipset drivers from MSI support page
Checking/replugging the front usb 3.0 connector on mobo
This is driving me insane.

Aha, that is the newer chipset for sure. That destroys my initial thought then. 
Added: How are the Control Panel Power Options set up in the OS?

Similar Messages

  • MSI Z87-GD65 USB Razer Megalodon not recognized by windows!?

    Hi guys, I recently just upgraded my PC and everything is okay except my USB Headphones are not recognized on this system oO I had to reinstall windows to get the motherboard to be compatible with my setup and after updating windows and looking up the problem, I haven't found an answer.
    The Headphones work 100% sure because they worked on my old mobo and my laptop that is right next to me.
    Says its an unknown device and has a ? next to it. Also these headphones use the Windows USB Generic Audio Driver but for some reason its not working.
    Any help would be appreciated alot

    Try the latest Bios: >>Beta BIOSes<<
    I will check for a newer version as well right now.
    Edit: .141 is the latest.
    Might want to check for a firmware update for the usb device as well.
    Edit#2: Install the ram properly and see if that changes anything. Locking this topic as it is a duplicate.

  • I cannot get usb port to be recognized by my PC O/S Vista. I have only did a sync once I have had it a year. I have cleaned my computer and still cannot snyc it.

    Please help me I am getting whatever is attached to usb port is not recognized and there are no drivers. I thought maybe I should go thru my computer and clean out any excess. Computer PC and O/S Vista Home Premium.  When I installed apple to set up sync it worked right away. As I am a PC person should I uninstall and then reinstall all of the software, iTunes updated & sync iPod. Thank you in advance for any help any of you can give me.
    What are tags?

    You said:
    "whatever is attached to usb port is not recognized and there are no drivers."
    This imples that your computer does not see any device, not just the iPod when it is connected ot a USB port.  This points to a major problem with Windows or a hardware problem. Use the WIndow's troubleshooting to get the USB ports to work.

  • I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me

    I have been connecting my external HD to my Mac for 2 years, no problem at all. Yesterday, I could not connect it and appeared the message: USB ports disconnect due to energy. I already checked many blogs and this site for answer. Can someone help me? How can I fix it?

    Hi, clara_from_brazi.
    Thank you for visiting Apple Support Communities.
    Here are some troubleshooting steps that I would recommend when experiencing this issue.  Also, test connecting the external storage device to the computer with another cable as this can be the issue.  
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Apple Computers and Displays: Powering peripherals through USB
    http://support.apple.com/kb/HT4049 
    Cheers,
    Jason H.

  • Macbook Pro right USB port disconnects

    Hi - When using the dialup modem adapter in the right USB port it will disconnect after 3-4 minutes but works fine in the left port. Flash drives & scanner seem to work OK in the right.
    Also, a friend has computerized embroidery sewing machine and the right port does not recognized it but the left does on her MAC.
    Are Macs were bought a couple weeks apart.
    Is there a setting for each USB port that maybe wrong or is this just a defect?

    Well, does that link...
    http://lists.apple.com/archives/Usb/2006/Oct/msg00052.html
    still lock up your Mac? No way it should have any such effect.

  • My USB Port does not Find my I POD

    My USB port does not find my I POD. I have Installed all th elatest software.

    Welcome to Apple Discussions!
    Does the iPod show Do Not Disconnect? You may want to try resetting your iPod while it is connected...
    http://docs.info.apple.com/article.html?artnum=61705
    See if this link helps too...
    http://docs.info.apple.com/article.html?artnum=61711
    Finally, more details on the issue such as what your computer (if anything) does and what the iPod does.
    btabz

  • My usb port does not work on all user accounts

    My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
    Spring 2011 macbook air with the latest OSX as of Jan 2012.
    Thoughts
    THANKS
    Stan

    Try Resetting the System Management Controller (SMC)

  • USB ports does not work

    Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

    What driver have you updated?
    Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
    Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
    Have you done any changes to the system? (for example: self-install OS or changing OS)

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • ITunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other.

    iTunes said my iPod Nano 4G is corrupted when it's in one USB port, but not in the other. Is the port faulty? Windows 7 PC

    Could just be a loose connection or that the cable itself is going bad.  There are a number of factors that could play into this scenario.
    B-rock

  • HP Pavilion dv6-6b10tx two of the usb ports are not working

    I have recently bought a HP Pavilion dv6-6b10tx....and had it fixed by hp for a problem with the beeping noise.
    After sending my laptop for repairs( replacing the system board), I received my laptop but two of my usb ports are not functioning...
    I did a bios update and did the hp update to see if it actually fix anything but not luck.  So I went device manager and found a exclamation mark on the renesas electronics usb 3.0 host controller with a device status 'This device cannot start. (Code 10)'.  What do i do??

    The question is why is the port not working?  Is something in the port that you can see?  If not, then there isn't much you can do but take the computer in to the genius bar and have the techs see if it is a circuit problem that can be fixed.

  • Audio output and left USB port is not working!

    Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
    What happened?
    Part No.: Z0JH000TE RS

    If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
    The newest BIOS is already installed?
    Have you removed all USB ports from device manager and restarted your notebook?
    If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

  • T420 USB Ports do not work after installing XP

    Hello my office has  been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it.  The issue we are having is that the uSB ports do not work.  I have tried every driver I can find but still no luck, can anyone help?

    hey chris0277,
    could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
    If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • PavillionG​7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

    Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
    Shawe

    Hi:
    Download and instal both of these drivers and reboot.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405​...
    http://h20565.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405​...

  • I have a new Nano and I get a message that says the USB device is not recognized by my computer and I cannot set it up.

    I have a new IPod Nano and when trying to connect to my PC for the first time I get a fault message that says the "USB Device is not recognized by my computer. I have several other IPod devices and have never had this problem. When I go to windows explorer, the device does not show at all, so I cannot manually open it.

    Hello JETaylor2015,
    Congratulations on your new iPod nano!  I would be concerned too if my iPod was not recognized by iTunes or my computer.  I recommend reviewing this article for steps to take when your iPod is not recognized:
    iPod not appearing in iTunes
    http://support.apple.com/kb/TS3716
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for