Z87-G45 will not boot unless I enter BIOS or boot menu

Hi,
I v got some problem with my Z87 - unless I enter BIOS or boot menu(F11), I v got error message "Reboot and select proper boot device....".
When I enter BIOS(or boot menu), and dont change anything, exit&save it boots just OK.
The boot priority is simply the OS drive as 1st and everything else disabled. Every single driver is up to date (using supplied live uptade for board (v1.7 bios), and official inter drivers for OS drive (intel SSD), sound, graphics,... everything). Nothing but mouse, keyboard and LCD is connected to the PC. No DVDs inserted, no USB flash drives. Win7 64-bit clean(except drivers ofc) installation.
Any ideas what might be the problem?

Quote from: ondrej.byrtus on 09-May-14, 01:57:58
Hi,
I v got some problem with my Z87 - unless I enter BIOS or boot menu(F11), I v got error message "Reboot and select proper boot device....".
When I enter BIOS(or boot menu), and dont change anything, exit&save it boots just OK.
The boot priority is simply the OS drive as 1st and everything else disabled. Every single driver is up to date (using supplied live uptade for board (v1.7 bios), and official inter drivers for OS drive (intel SSD), sound, graphics,... everything). Nothing but mouse, keyboard and LCD is connected to the PC. No DVDs inserted, no USB flash drives. Win7 64-bit clean(except drivers ofc) installation.
Any ideas what might be the problem?
I am under the impression that this not a fresh build...did you remove recently any drives....do you have dual boot....?

Similar Messages

  • MSI Z87-G45 will not load OS with two SATA HDD's connected

    I have an MSI Z87-G45 board and I am attempting to connect a second SATA HDD. Each time I connect the second disk and then power up the workstation I get the following message:
    Reboot and Select proper Boot device
    or Insert Boot Media in selected Boot device and press a key
    The primary HDD is a WD 160GB drive and the secondary drive that I am attempting to connect is a WD 2TB drive. I am not trying to dual boot, I just need a second disk for a little more space available. I am not sure if there are some settings that would need to be changed in the BIOS, but I would think that by default I could connect a secondary HDD, and it would be recognized as such. Anyone else dealt with this or have any pointers? This is really driving me crazy.
    I should note everything else with the workstation works perfectly, it's just when adding a second drive, it will no longer load windows 7 from the 160GB drive.

    That is one reason this is driving me crazy, I have made sure that the 160GB drive is primary in the boot process. Is there anything else you can think of that may be causing this?

  • MSI 770-G45 will not boot/POST

    I just built a new computer yesterday (specs in signature) and have been trying to get it to work all day.
    It powers on, all fans start up for all components (CPU heatsink fan, GPU heatsink fan, etc) but there's no POST beep and no signal for the graphics card.
    CPU is seated correctly, LEDs are active to phase 4.  All cables/components are secure, nothing is loose.
    I've tested each DIMM slot individually, tried booting with only 1 stick of RAM with no luck.  I've tried RAM from another computer that I know works with the same results.  Tried a different video card, tried with no video card to see if I could get it to POST at all.
    Tried three different hard drives, but I don't even think the computer is getting to BIOS.
    Reset CMOS to no effect.
    The only time I've ever gotten any sound from the motherboard speaker is when I took all the RAM out and powered it on, and it gave a RAM error, so at least it's getting that far in POST?
    I'm guessing it's a RAM compatibility problem, or a defective motherboard, but I could be missing something obvious.

    Quote from: Bas on 30-August-10, 15:20:59
    I doubt you can RMA a CPU because of bent pins as that's something you done.
    Yes you know he did it right? It could never happen any other way. My crystal ball must be foggy cause I can not in any way know if they bent the pins themself or not.
     It's a new CPU under warranty,  I would just call up say it was shipped that way and see where I get to. I would go to the retail first then if no help try manufacturer. Best bet would be retail and if it was shipped by UPS or something you can posibally claim damage in shipping.
    Their is always something to try Bas, don't be so negative.

  • MOVED: MSI Z87-G45 will not load OS with two SATA HDD's connected

    This topic has been moved to Intel Core-iX boards.
    https://forum-en.msi.com/index.php?topic=172828.0

    That is one reason this is driving me crazy, I have made sure that the 160GB drive is primary in the boot process. Is there anything else you can think of that may be causing this?

  • On cold boot or restart, MacPro will not start unless CD Tray is open. Any ideas why ?

    On cold boot or restart, MacPro will not startup unless CD Tray is open. Any ideas why ?

    hello Singyt, the bug report associated to this kind of crash indicates that it might be a malware related issue.
    your crash report also shows a file named "urixalog.dll", which doesn't turn up any search hits on google, which is also slightly suspicious. could you search for that file on your pc and upload it to a site like virustotal.com in order to analyze it.
    please do a full scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes].
    [[Troubleshoot Firefox issues caused by malware]]
    edit: the bug report also suggests that a monitoring program named spector pro/360/... which essentially acts like malware, might cause the issue. in case you have that installed please remove it. otherwise [https://support.mozilla.org/en-US/kb/Firefox%20crashes%20when%20you%20open%20it#w_backdoor-ulrbot-c here] would be a removal guide for urixalog.dll

  • G4 powermac will not boot up nomally unless i boot up in safe mode help ?

    My G4 power mac will not boot up when switched on itakes several re boots and somtimes crashes.
    Will boot up in safe mode. but this only allows me to use some of the application software i need and not all of them.
    Can anyone help I thought it could be the hardisk but why would it boot up in safe mode?

    Boot from the Tiger installation disc 1 (hold down 'C' on startup). Don't touch the installer, go to the menu bar and select Disk Utility (I think it's in the Tools menu on Tiger).
    In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.). Run Repair Disk.
    If problems are reported, run it again until the green message says the disc seems to be OK.
    Quit DU, quit the installer and restart.
    If DU says there are problems it can't fix, you may need DiskWarrior.
    Either way, let us know the results please.
    (PS; this is the Intel iMac forum - PPC are next door!)
    Message was edited by: noondaywitch

  • 2009 Mac Pro will not boot up under Windows

    I have an Early 2009 Mac Pro system (Mac Pro 4,1) and I've had this system for 3 years already and have been working under OS X with this system ever since I purchased it.
    However, when I tried to boot off my Windows disk, something very interesting happens. The Mac Pro WILL NOT boot up off the Windows disk or a known working Windows partition if two monitors are connected. Upon holding down the option key and selecting the Windows partition, I will get a black screen on one monitor (the one connected via Mini Displayport) and the other screen receives no signal and will enter standby and the system is halted. It does not respond to keystrokes, there is no hard drive activity, no measured power increase on the UPS, no apparent network activity, nothing. The only way to exit this scenario (from what I can tell) is to power off the machine, disconnect the display on DVI, power on the machine again, select the Windows partition wait for the system to reach the login window and reconnect the DVI monitor (at which time Windows recognizes it immediately and the system works fine again).
    My question to the community is, does anybody know why this is happening and is there a known fix for this? Quite frankly, having to disconnect a monitor just to restart is very tedious and frustrating. 
    I have two Samsung P2350 monitors attached to an ATI Radeon HD 4870 (512MB, from Apple). One is monitor is connected via directly DVI and the other is using a Mini Displayport to DVI adapter. Both monitors work fine under OS X with no issue. At first, I thought that this may be a driver issue on the Windows side and after installing all the latest updates and drivers the issue is still apparent. From what I can tell, this doesn't seem like a software issue but rather a firmware or EFI issue as this happens before Windows even loads.
    If anyone knows of a fix or what to do in this situation, or if you are also having this issue, I would love to hear your input!
    Thank you!
    For the record, I am running all the latest software builds on the OS X side (10.7.4, not that it would really matter at this point). I have also disconnected all unnecessary equipment in a trial and error scenario but the results are still the same.
    The system passes all ASD testing.
    The full specification of the computer and all connected equipment are as follows:
    2009 Mac Pro (4,1) 8-Core
    2x Intel Xeon Nehalem 2.66GHz Quad-Core CPUs
    16GB DDR3 ECC 1066MHz RAM (Apple Branded)
    Two OWC 120GB SSDs (One for OS X, the other for Windows 7 x64) - These are in place of my optical drives.
    4x 2TB WD Black Hard drives for storage.
    Two Samsung P2350 Monitors connected via DVI. (One using a Mini Displayport to DVI adapter).

    In Windows I am using the latest (12.4) Catalyst Software Suite, 64 bit of course, downloaded directly from AMD's site after installing the drivers from Boot Camp.
    As for installing Windows I used an original (not burned) installation media (Disk is in a pristine condition). And yes, Windows is fine, the problem just seems to be getting the system to boot up Windows with that second monitor. However if the "problem monitor" is disconnected the system boots fine 100% of the time and connecting it later after booting the system will still operate properly.
    For the sake of arguement I swapped monitor cables and connected the "second" monitor to the mini displayport adapter to verify that it wasn't a cabling issue and I'm still yielding the same issues.
    As for GPU testing, I've played games (Crysis, Grand Theft Auto IV, Battlefield 3, etc.) and I've had no issues with the card or stability.
    You would think that Apple would try to find a fix for this, especially considering the caliber of this machine.

  • My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours and

    My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen.  Can anyone tell me what this is?  I've restarted and turned off several times.  I left it on in this state for 8 hours hoping it would reload and work.  No luck.

    Hello KCC4ME,
    You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
    OS X: What is Safe Boot, Safe Mode?
    http://support.apple.com/kb/HT1564
    If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
    OS X Mavericks: If you think you have incompatible login items
    http://support.apple.com/kb/PH14201
    Cheers,
    Allen

  • I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

    I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

    Are there any previous networks that you have used that have the same password as Molly?  YES
    Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
    Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
    Delete any other networks that you no longer need so that your Mac will search for networks more quickly
    Click OK, then click Apply
    Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
    Then look for any old networks that might have used the name Molly in the past and do the same for them.
    Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
    Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
    and then click KeyChain First Aid
    Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
    Quit Keychain Access
    Power down the entire network...all devices...order is not important
    Power up the modem first, then your main router, the other devices one at a time
    Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

  • Mac Mini will not boot after Security Update 2008-007

    Hello,
    A G4 Mac Mini machine I was asked to take a look at will not boot after the owner (succesfully) installed Security Update 2008-007 from Software Update. Booting always hangs at the blue screen after the Apple logo, and booting in verbose mode reveals that WindowServer is crashing repeatedly. Permissions and filesystems have been repaired, PRAM reset, etc. Safe boot also exhibits the same problem, but it is possible to boot to single user mode. Hardware checks out fine with diagnostic utilities.
    Any suggestions on how to fix this? Unfortunately, backups are not available (it's not my machine =).

    Hi Arkku , and a warm welcome to the forums!
    I'd certainly give Sig's advice a try first.
    If that should fail...
    applesetupdone...
    This was Posted by: JoseAranda at September 9, 2006 3:48 AM
    "OK, restart your computer, hold down Command-s and type in the following:
    /sbin/fsck -fy Enter
    /sbin/mount -uaw Enter
    rm /var/db/.applesetupdone Enter
    # The rm command is the remove command which deletes the file.
    # Robert: I'd rename the file via: mv /var/db/.applesetupdone /var/db/.applesetupdone.old
    reboot Enter
    Once you've done that the computer reboots and it's like the first time you used the machine. Your old accounts are all safe. From there you just change all other account passwords in the account preferences!!
    end of posted by: JoseAranda"
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/

  • Equium will not boot - how to access Recovery partition?

    Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit which will not boot (probably due to virus rootkit damage). It loads the BIOS but then goes straight to black screen with flashing cursor.
    F8 does not work.
    F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and CD-ROM drive are listed in Main and Boot in the correct order.
    Using F12 I can get it to boot from a Win7 64-bit repair disc I burned using my laptop.
    However, this does not recognise the OS nor any image or restore points (because it is 64-bit) but it will load Command Prompt.
    In *Command Prompt*, I can start Notepad and when I click File/ Open and double click on Computer it shows 4 Hard drives as follows:
    Local Disk (C:)
    Data (D:) 42 GB free of 54.5 GB
    WinRE (E:) 1.11 GB free of 1.46 GB
    Boot (X:) 29.0 MB free of 31.5 MB (which is used by the Repair disc)
    So the C: drive is listed but without capacity.
    *CHKDSK*
    chkdsk c: /r and press return
    "The type of the file system is NTFS.
    Unable to determine volume version and state. CHKDSK aborted.
    Failed to transfer logged messages to the event log with status 50.
    *Running TESTDISK*
    Analysis:
    Partition Start End Size in Sectors
    1 P Windows RE(store) 0 32 33 191 89 26 3072000
    2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
    3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)
    * = Primary bootable
    When doing Quick Search and then P - list files, of the second partition it reports:
    "Can't open filesystem. Filesystem seems damaged."
    So what I would like to do is boot up from Windows Restore on the E drive.
    My question is to any Toshiba experts: When F8 does not work how do I use the recovery partition???
    Laptop is:
    Part Number : PSAF5E-002005KS
    Key Features
    - Intel Pentium Dual-Core Processor T2310
    - Genuine Windows Vista Home Premium Edition
    - DVD Super Multi (Double Layer) drive
    - 2,048 (1,024 + 1,024) MB RAM (667 MHz)
    - 15.4 " WXGA TFT display 1,280 x 800

    *UPDATE*:
    I have borrowed a genuine Windows Vista Home Premium 32-bit dvd and booted up with that.
    Clicked on "Repair your Computer"
    Then it goes striaght to System recovery Options but no Operating System is shown. Click Next.
    Then:
    "Choose a Recovery Tool.
    Operating system: Unknown on (Unknown) Local Disk"
    *Startup Repair*
    This takes 1 second.
    Root cause found
    System volume on disk is corrupt.
    *System Restore*
    "X - To Perform an offline System Restore, you must specify which Windows installation you would like to restore.
    For example, if the installation located in "C:\Windows" should be restored enter the following command:
    rstrui.exe /OFFLINE:C:\Windows "
    *Windows Complete PC Restore*
    " No valid backup locations could be found.
    Windows cannot find a backup on the hard disks or DVDs on this computer. Attach the correct hard disks or insert the last backup DVD and then start the restore process again. "
    Windows Memory Diagnostic Tool
    Windows cannot check for memory problems...[snip]
    *Command Prompt*
    This is working fine.
    CHKSDK C:
    The type of file system is NTFS.
    Unable to determine volume version and state. CHKDSK aborted.
    The HDD is 120 GB and is split by Toshiba into 3 partitions.
    C:\ drive (56GB) is bootable with Windows - this is corrupted.
    D:\ drive (55 GB) has all Data - fully accessible
    E:\ drive is CDROM
    F:\ drive (1.46 GB) is the WinRE recovery partition - this is fully accessible.
    So my question still remains: can I recover my Toshiba laptop using this recovery partition?
    PLEASE NOTE: as mentioned above, pressing F8 during boot has no effect and therefore Safe Mode cannot be accessed.

  • My Macbook will not boot the operating system.  It just goes to a blue screen after the apple logo and the spinning wheel goes off.  I took the battery out and held the on/off button for five seconds and reset the PRAM.  I have the old mac os disk.

    My macbook will not boot.  It goes to a blue screen after the logo and wheel goes off.  I have taken the battery out and held the on/off button for five seconds and reset the PRAM.  I have the the original os disk but have not put it in for fear of losing un backed op data.
    Thanks
    Rich

    You won't lose any data unless you erase your hard drive.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

  • RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's

    RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's.
    The following instructions about  the "Code Purple" error FAILED. Error is still present.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ***PLAIN ENGLISH QUICK AND EASY FIX FOR ALL SYSTEMS****
    ***Windows 7 code purple or Windows Vista code purple***
    With the code purple error on the screen, press shift+f10 (the shift key and the F10  key (at the top of the keyboard) at the same time) to open a little screen called a  command prompt. (So, you get a little black screen with white text that says something  about your Windows verison first and a little ways down you'll see "C:\>".   It's all  ready for you to start typing.)
    Type the following line, just as you see it here...
    notepad C:\hp\bin\checkdmi\checkdmi.cmd
    so it will look like this
    C:\>notepad C:\hp\bin\checkdmi\checkdmi.cmd
    Press Enter.
    You will see the text for the file listed in a window using a simple text editor.
    Go to the beginning of the text. Press enter to make a space. Type this...
    goto cleanup
    So, whatever comes after, the first line looks like this...
    goto cleanup
    Save the file and exit notepad and restart your PC. You are good to go.
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    RESULT: Same error and problem.
    So, NOW THE SCENARIO IS THIS...[ And A CHALLANGE TO ALL HP Software EXPERTS]
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
    1. The PC will not boot the System Restore CD's
    2. The Original OS install and [HP_RECOVERY] disk sector has been severely damaged by
    all of the following:
        A. Massive Virus Infections as shown by Kaspersky Virus Scan and cleaned up.
        B. The user had originally updated the pc to Vista Business Express Upgrade
            (Supplied by HP with the original purchase and warranty).
             (Prior to the upgrade, Media Center was working correctly.)
        C. The original OS product key(XP Media Center Ed. 2005) has been changed by the Vista Business Express upgrade.
        D. The destructve recovery done by PC-Doctor has done user file damage(s).
        E. All software, and possibly hardware could be corrupted & damaged by viruses,
        incomplete recovery, and the unknown failures and conditions.
    To sum up, the system is locked in an unknown state, waiting for expert help.
    (I can allow and manage to let someone diagnose, repair remotely using another OS  i.e.Linux Opensuse 12.1, or XP Home ed if needed.)
    SO IF YOU THINK YOU ARE UP TO THIS CHALLANGE, SEND MESSAGES TO DAVHPForum anytime. Thanks in advance!
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

    Hello @DAVHPForum,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how you are not able to boot your computer using the HP system restore CDs, and I would be happy to assist you in this matter!
    If you are not able to recover your system by following the steps in this document, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • X79A-GD65 (8D) will not boot with 4930K or 3930K

    Short version:
    My system will not boot but gets stuck at "09 Power on South Bridge Initialization"
    Detailed description:
    I just bought this system and am when I tried to start it it got stuck at "09 Power on South Bridge Initialization". I have removed everything that is not necessary (gfx-card, HDDs, etc.) and only have the CPU and one memory stick inserted (in slot 1 as per the manual). I have also unplugged and put back all power cables from the PSU several times. I have also tried using BIOS A and B.
    As I read on this forum that a BIOS update was needed for IVY-Bridge CPUs I bought a 3930K today to see if I could get the system up and running but it still gives me the same error code.
    My board serial number is 601-7760-010B1312109204, assuming it is manufactured 1312 = December 2013.
    I don't know the BIOS revision as I have never managed to get past the 09 status code.
    Any ideas on what the problem could be?
    Bought this monster PC as I have a delivery for a client in need of some RAM-heavy processing, so am really starting to feel stressed out about this by now.
    Thanks in advance!
    System details:
     - MSI X79A-GD65 (8D) X79 S-2011 ATX
     - INTEL CORE I7 4930K 3.4GHZ 12MB S-2011
     - INTEL 530 80GB SATA SSD MLC RESELLER KIT
     - INTEL 530 480GB SATA SSD MLC BULK (4 of these)
     - FRACTAL DESIGN INTEGRA R2 750W
     - ASUS GEFORCE GT 210 1GB DDR3 PCI-E VGA/DVI/HDMI SILENT
     - KINGSTON 64GB 1600MHZ DDR3 ECC REG CL11 DIMM (4X16GB) W/TS (two kits, 128GB in total, don't really need ECC but that's what I could find needing 16GB sticks)

    even compared to just 10 years ago sales staff have became really dumb as there just hiring people who do not care about anything as long as they get there cut of a sale (usually all they know is basic Consumer parts they stock) and nearly non of them unless they specialize in that level of equipment will have 0 idea what they work with on a pro level part (ECC memory tends to be used on servers and Professional workstations so if they do not use that type of gear then they probably have no idea what ECC really is at all)!
    also in that time some major things have happened especially with computer parts like the memory controller moved from the Chipset to the CPU same with the SATA controller , onboard GPU (thats now on the CPU and some have it some don't) and alot of other things and I guess that the people you dealed with had no idea the memory support has very little to do with the board (all the board can do is have BIOS Timing sets now and lists of parts it supports) and is now to do with the CPU alot more as it has the important stuff on it (there very close to a SOC (System On Chip) now)!
    if you plan on building another computer remember to do some research yourself before you get a CPU as it is nearly the most important thing of all and they have different features tied to them and do not expect sales guys to have a idea unless there also a Technical support staff member too and work on computers that are of the same class your trying to make and have at least used the same level gear (usually if your doing something like that find a friend who is a computer nerd tell him what your trying to do and get him to help you choose all the parts)!
    let me know how it goes when you get the Xeon and have it installed?

  • I want to wipe iBook of it's content, but it will not boot up from DVD

    Can someone tell me how I clear off the content of iBook and install the basic set of the applications? I have the original OS 9 disks but they will not boot up with these. I have gradually upgraded the OS so I don't have disks to match 10.4.11.
    I want to give this away, as I bought new MacBook Pro recently and I have all of the files on the new computer, (and on another hard drive).
    Thank you for any help from out there.

    No problem; I usually answer good questions already solved. (It's for the search engine.) Here's how to wipe a corporate or government ATA hard drive.
    Should you be concerned about spies, industrial and foreign, or even you own personal information, there is a standard method of erasing ATA disks that contain government classified information. Most ATA disks have it built in (and is a concern when purchasing computers for classified research). It's extreme, but sometimes necessary: information otherwise remains stored on 'bad' blocks, &c.
    At one time, only the DOS program HDDerase activated the secure erase in ROM. For Mac users, the Linux program 'hdparm' (which has other uses) will do this from a Live Linux distribution on CD (unless you can boot a USB Flash Drive).'Darwin' might have it.
    How to Nuke an ATA Hard Drive
    http://ata.wiki.kernel.org/index.php/ATASecureErase
    Note that, if you stop the process part way though, the disk may not be usable again (except to spies). Also, nothing is guaranteed.
    If Darwin doesn't have it, or if it doesn't work, LiveCD distributions, such as Mint, Berry, & those of major distributions can be found here:
    Linux Release Watch
    http://distrowatch.com/

Maybe you are looking for