Z87-G65 power issue with usb(port reset failed)

All,
I'm having an issue with my motherboard and wanted to see if anyone had suggestions. In windows 8.1 if I have my webcam or external hard drive plugged in USB. I get this error the the USB device is not recognized and the port reset failed(code 43). I noticed when I turn on the PC and it's booting the light on the webcam and hard drive flash like it's not drawing enough power to stay on. The boot sticks at 9c on the screen and I have to reset. When windows boots they turn off. Since it's before windows boots I think this is either a MB issue or a power supply issue. I have a corsair 750 watt power supply so plenty of power. Any ideas?

Board: MSI Z87-G65
Bios: Version 1.9
VGA: MSI Gaming N780 TF 3GD5/OC GeForce GTX 780 3GB 384-bit GDDR5 PCI Express 3.0 SLI Support Video Card
PSU: CORSAIR HX Series HX750 750W ATX12V 2.3 / EPS12V 2.91 SLI Ready CrossFire Ready 80 PLUS GOLD Certified Modular Active PFC Power Supply New 4th Gen CPU Certified Haswell Ready
Intel Intel Core i7-4770K Haswell 3.5GHz LGA 1150 84W Desktop Processor Intel HD Graphics BX80646I74770K
MEM: CORSAIR Dominator Platinum 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 1866 Desktop Memory Model CMD16GX3M2A1866C9
HDD: SAMSUNG 840 EVO MZ-7TE500BW 2.5" 500GB SATA III TLC Internal Solid State Drive (SSD)
COOLER: NZXT Kraken X60 RL-KRX60-01 Ultra Performance Water/Liquid CPU Cooler 280MM
OS: Windows 8.1 64bit Professional
CASE: NZXT H630 CA-H630F-W1
I am plugging them into the USB 2.0 ports on the back of the motherboard, but it doesn't seem to matter where I plug them in I get the same errors.

Similar Messages

Is it safe to use the Belkin power strip with USB ports to charge my iPad? Or is the iPad USB adapter the safest route to take when traveling with device?

Is it safe to use the Belkin power strip with USB ports to charge my iPad?
Or is it better to travel with the Wall Charger provided with iPad?
Concerned about safety of the device. Thanks for your thoughts.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Anyone having issues with USB port power after upgrading to iTunes 11.1?

After upgrading to itunes 11.1, I can no longer use the USB ports on my wired keyboard to synch my iPhone 4s, ipod Nano, and Ipad 2. Previously, I could use this port to synch and charge the nano and iphone, and synch (but not charge) my iPad. Now I simply get an error when I attach any of the devices ("a usb device needs more power").
I currently use all four of the USB ports on the back of my imac (UPS power supply, aformentioned keyboard, a Lacie backup drive that has its own power supply, and a superdrive). Interestingly, when I unplug the Superdrive (which is plugged directly into the mac on a separate USB port), the USB port on the keyboard will work. Unplugging any of the other 2 devices does not allow the port on the to work.
I bought the wired keyboard to have the easily accessible UBS port to synch my nano as well as the fact I needed a number pad.

Get yourself a good self-powered 7 port USB hub to plug your extra devices into.
Belkin International, Inc F4U041v - Best Buy
PROVANTAGE: Belkin F5U237-APL-S Hi-Speed USB 2.0 7-Port Hub for Apple #TB857LL/A
NewerTech USB2HB7PRO 7 Port Hi-Speed USB 2.0 Hub... in stock at OWC
MacAlly TRIHUB7 TriHub - 7 Port Hi-Speed USB 2.0... in stock at OWC

Video issues with USB port replicator with Digital Video

I have a T400 running Windows XP SP3 32-bit, with the graphics mode set to use the ATI video card. I'm also using the latest approved Lenovo ATI driver for this machine.
I have two issues, one of which I consider major:
1) Sometimes when I plug in the replicator (got the latest drivers off of the Lenovo download site) everything works great, and other times the monitor never powers up. I plug the replicator into my laptop and the external keyboard and mouse work and the port replicator system tray icon appears, but the monitor is still in power-saving mode. If I try to activate the monitor by "extending" or "mirroring" it, it comes up with a pop-up that says:
"ThinkPad USB port rep. device: Error" - "Fail when adding device instance into driver!"
2) This is more of an annoyance, but I noticed when the monitor does work that black areas of the screen end up getting sparkly green lines through them. They aren't "actually there" in the sense that it's not corruption from the computer, they are simply artifacts of what seems to be some signalling problem.
Any help is greatly appreciated.

wim1234 wrote:
We (DispkayLink) have tested office 2013 and not found any BSODs so there must be something system specific.
Could you gather the system logs and post here so we can see what might be wrong? Details on how to do this are here:
http://kb.displaylink.com/269
Thanks
Wim
Your reply is 2 months later, I had to revert to Office 2010 and return the laptop to the end user.
But, I got another model of the same laptop right now which can be used to test it, I will let you know if it works out this time with the lates DisplayLink software for Windows.

Syncing issues with USB port

I can only sync on the USB port on my G5 tower. When I plug into the USB port on my Apple Cinema display the phone only charges...no syncing. Any ideas? I'd like to use the display port.

The USB port on your Cinema is a port on the built-in hub in the display. It can't supply the power needed by the iPhone.

Power speakers with USB port

Before I buy a pair of USB speakers, could I power them using the USB port on the airport express then run the 3.5mm cable to them for the music?
I'm sure this is a daft question, but I thought I'd check.

That is correct, although the Express will power a pair of headphones nicely.
The audio port on the Express is dual purpose as it will work for both analog and optical digital signals.

Issue with USB ports

Hi,
I have a strange problem with my thinkpad T410 laptop. If i restart my laptop, usb drives wont work. Everytime i reboot, i have to login to safe mode, uninstall the drivers, reboot and login to normal mode to use USB ports. is there any fix for this? FYI, i have Wwin xp sp3 installed on my laptop.
Thanks,
Sridhar

start-->control panel-->system and security-->device manager-->expand the universal serial bus controllers-->right click and uninstall all of the USB root hubs-->restart-->they will reinstall on restart, and search for attached hardware.

Issue with USB ports and Blue Screen

So, I had to send my Satellite L355-S7905 back and Toshiba had to do a factory restore. I got it back 2 weeks ago and now I have a new problem; 2-3 times a day my mouse and printer stops working, these are connected via USB ports and I get a message that the device is no longer recognized. I found a solution on the Microsoft site to go to Device manager and Scan for new hardware changes and then Restart. I do this and when I restart I get the dreaded blue screen. So I then have to unplug, take out the battery and turn the computer back on. Then the mouse and printer are recognized. This will work for several hours and then the whole thing happens again. So, are there any long term solutions? Can anyone tell my why this is happening? Please note, that that the printer and mouse are not new and no new hardware has been installed since getting it back from the factory.
Thank you for your help!!
Jennifer

start-->control panel-->system and security-->device manager-->expand the universal serial bus controllers-->right click and uninstall all of the USB root hubs-->restart-->they will reinstall on restart, and search for attached hardware.

After a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. How do I fix this issue?

I have a Mac Pro 5.1 and after a power outage my usb ports on the back of the tower do not recognise the apple usb keyboard upon start up. If I leave the plug out and then insert the keyboard after start up it works fine. The same happens with the front usb ports. How do I fix this issue?

System.log says USB related message?
Resetting SMC as well as NVRAM could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC)
About NVRAM and PRAM

Connectivity Issues with USB 3 ports on macbook pro

Hi, I have a zoom r24 which is no longer working as an audio interface with my new macbook pro. I have read a lot about issues with USB 2 devices not being compatible with USB 3 ports on the macs. This seems to be midi as well as audio devices. Can anyone recommend or point me to a list of supported devices for both audio and midi which are guaranteed to work with a late 2013 macbook pro retina display. I cant afford a thunderbolt device. Thanks steve

Just a wild thought here, but have you tried inserting a powered USB 2.0 hub between the MacBook and the interface?

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Tim

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

My 2007 Macbook pro Intel Core 2 Duo   Processor Speed 2.33 GHz has power issues with one or some of my USB powered devices. Last night I could not back up my Lacie external drives with software SuperDuper, hard drive copier. I also had a message that Time machine failed. I have two powered 12V USB
routers that are plugged into a 550VA CyberPower surge protector. I often receive these insufficient USB power for devices messages a dozen times even when I do not have devices like camera, Ipad, Ipod, and Tascam digital audio recorder plugged in. Is there a way to troubleshoot these USB routers or should I consider that one of the routers may be defective and replace them?
David

Print not response when i connect T1100 Epson to router RT-N16 ASUS with USB port???

For my macbook pro that I brought July 2010. I can print with T1100 Epson printer connect directly to my mac but when I connect T1100 to ASUS Router RT-N16 with USB port and I assign print to T1100 pass through wireless It's not response. How do we do please ???
Many Thanks for your answer...

Hello Shawnondrums,
Welcome to the HP Forums.
I see that you are having an issue with the printer shutting down when attempting to connect to the wireless network.
A very important step that gets easily over looked is, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Once the printer is back on, please use the on/off button to do a proper shut down and restart. This will also do a semi power reset on the printer.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

Split x2 problem with USB ports not working

My computer is somewhat new and this problem has been happening since I first got it. I couldn't find anything about this problem here or elsewhere online.
When I plug anything into either USB port (I've tried my phone and an external harddrive) the computer like sort of recognizes it on and off. When I plug in my phone the computer beeps at random every several seconds and doesn't recognize it. The external hard drive was sort of recognized but only on and off and I couldn't move things from it to my computer because it wouldn't stay connected long enough. It's literally like every 2-3 seconds it recognizes the USB thing, changes it's mind and then recognizes it again, etc. forever.
I haven't had a chance to test the SD card slot or the HDMI port yet.
Sometimes the mouse freezes also, I'm not sure if this is the same problem (related to connection between the tablet and the keyboard parts) or if these are separate problems. It seems to be happening less often and goes away if I wait for a moment. Still annoying but the USB ports not functioning is a more urgent issue.
I need help, is there a way to fix this or is something faulty with my computer?

Hi Purple24,
I understand you are having issues with USB on your HP SplitX2. Here is a document on general troubleshooting.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03327635
I would be happy to assist if needed. Please let me know what is your model number? Here is a link that will help you find that out.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Z87-G65 power issue with usb(port reset failed)

Similar Messages

Maybe you are looking for