Z97M Gaming windows 7 installing problem, please help

hi everyone. I hope someone could help me. This is my setup I just built:
MSI Z97M Gaming (latest bios updated, v1.4)
Intel Core I5 4690S Cpu
2 sticks of Gskill DDR3 (2x4GB) 2400Mhz
Nvidia 970GTX 4GB PCIE video card
Samsung EVO 840 - 250GB SSD (latest firmware updated)
Corsair 750W PSU
And this is the problem: when i boot (from USB) Windows 7 SP1 setup, it runs fine until it asks me for a driver (which is missing) in order to proceed with installation. I suppose it's SATA driver, so I've copied last version of Asmedia SATA driver in my usb key. But when i point to it, windows setup says that no driver has been found! So it doesn't show the ssd and I can't proceed with setup. I've tried every subfolder of the "asmedia_sata_win78" main folder.
Also, I set LEGACY+UEFI mode in bios. I've also tried IDE mode for the sata controller, but nothing works
Any suggestion, please? Sorry for the bad english

do you have any other storage to try say standard HDD? to try it instead this SSD
Quote
Still, I boot from usb drive, still I point to intel 32bit storage drivers, still windows shows "Intel 9 chipset series SATA AHCI controller". But it doesn't find the hard disk 
i suspect something isn't ok with your installation disk
since its unclear is it 32bit or 64bit and since accept 32bit drivers only
can you use a better one? and to make sure that it would have SP1 integrated

Similar Messages

  • Can't get passed this install problem - Please help Adobe.

    I've downloaded the TRIAL version of PRODUCTION PREMIUM CS6. Once running / installed and tested it I will purchase it.
    But cannot get past this ERROR problem.
    Here is my install ERROR log ADOBE..  Please help.
    URGENT.
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DF027, DW063 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 0 warning(s)
    ----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
    ERROR: DF027: Unable to copy file from "/private/tmp/.tempdir6Qpuljrb/Assets1/Application/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" to "/Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/Resources/PS_LevelsIcon.icns" (Seq 1205)
    ERROR: DW063: Command ARKCopyFileCommand failed.(Seq 1205)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Photoshop CS6 English Language Pack_AdobePhotoshop13-en_US: Install failed
    ERROR: DW050:  - Adobe Photoshop CS6 Core: Failed due to Language Pack installation failure

    You can try resolving your issue using following document :
    http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
    and
    http://helpx.adobe.com/creative-suite/kb/error-unable-copy-file-tmp.html
    Regards,
    Sharath Holla.

  • Very Strange Logic Studio Installing Problem, please help !

    Hello .
    I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
    Than i erased what ever i could which was left from the failed installation .
    And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
    And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
    So far what i erased after failure was (only the ones i could find out of this list )
    Application Files
    /Applications/Compressor
    /Applications/Logic Node
    /Applications/Logic Pro
    /Applications/MainStage
    /Applications/Soundtrack Pro
    /Applications/WaveBurner
    /Applications/Utilities/Apple Loops Utility
    /Applications/Utilities/Impulse Response Utility
    Factory Settings, Instruments
    /Library/Application Support/Logic/
    /Library/Application Support/Garageband/
    /Library/Application Support/Garageband Content/ (Legacy)
    /Library/Application Support/Soundtrack Pro/
    /Library/Application Support/WaveBurner/
    Impulse Responses
    /Library/Audio/Impulse Responses/
    Receipts
    Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
    /Library/Receipts/AudioContentforSoundtrackProXX.pkg
    /Library/Receipts/CompressorXX.pkg
    /Library/Receipts/EXS24SamplerLibrarySamples.pkg
    /Library/Receipts/EXS24SamplerLibraryStudio.pkg
    /Library/Receipts/GarageBandXX.pkg
    /Library/Receipts/ImpulseData.pkg
    /Library/Receipts/ImpulseResponseUtility.pkg
    /Library/Receipts/JamPackXX.pkg
    /Library/Receipts/LogicXX.pkg
    /Library/Receipts/MainStageXX.pkg
    /Library/Receipts/RemixToolsXX.pkg
    /Library/Receipts/RhythmSectionXX.pkg
    /Library/Receipts/SharedLogicStudioHelpFiles.pkg
    /Library/Receipts/SoundtrackProXX.pkg
    /Library/Receipts/UltrabeatXX.pkg
    /Library/Receipts/WaveburnerXX.pkg
    User Preferences:
    ~/Library/Preferences/com.apple.logic.pro.plist
    ~/Library/Preferences/com.apple.logic.pro.cs
    ~/Library/Preferences/Logic/ (Legacy preferences)
    License
    /Library/Application Support/ProApps/Logic Studio System ID
    Apple Loops
    /Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
    /Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
    /Library/Audio/Apple Loops/Apple/iLife Sound Effects/
    /Library/Audio/Apple Loops/Apple/Jam Pack 1/
    /Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
    /Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
    /Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
    /Library/Audio/Apple Loops/Apple/Jam Pack World Music/
    /Library/Audio/Apple Loops Index/
    But what ever i tried, gives no solution . At the end a fail .
    How can i wipe out all the Logic existence from my computer to make new install ?
    Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
    Did anyone experienced that ?
    I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
    Thanks a lot

    it is very frustrating to see such an installation problem happening from a "professional" called DAW .
    I am actually a Protools user , and i have never had this type of complications .
    I mean come on, i am just trying to install the thing .
    On a new system, on a new computer and from an original purchase .
    I believe i have enough computer knowledge to instal a simple software .
    But i am spending almost 10 hours since yesterday to install Logic .
    Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
    Especially to see a professional audio software like Logic in this epic fall, is very very bad .
    I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
    Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
    Ah , i am sure Apple won't put attention on it , but doesn't matter .
    You just lost 1 customer for Logic
    I am erasing this thing now from my computer and continue with Protools as the way i was doing .
    Sorry if i am bitter, but this is not acceptable .
    Message was edited by: timbre2010

  • ITunes 9.2 + install problems please help.

    hi guys i recently bought a new laptop and when i try to install itunes 9.2 or higher it shows an error.
    error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
    i really need itunes because i recently bought an ipod touch and i cant sync it to get any songs
    any help is greatly appreciated.
    thanks

    error writing to file: C:\program files (x86)\commonfiles\apple\mobile device support\ssleay32.dll. verify that you have access to that directory.
    That's consistent with disk/file damage, tame.
    Let's try running a disk check over your C drive. There's Windows 7 instructions in the following document. Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors.
    [How to use CHKDSK (Check Disk)|http://www.w7forums.com/use-chkdsk-check-disk-t448.html]
    Does the disk check find/repair any damage? If so, try another iTunes install. Does the install go through without the error this time?

  • TIGER/POWERBOOK 12" G4 - erase and install problems. please help..

    Hello,
    I have a powerbook g4 (the last of the powerbook 12"/ 80gb/1.5ghz to be released) with tiger installed.
    I have had a a crash x 2 when doing software updates. So I managed to get it going, to then back up to an external drive - to do an erase and install.
    Once I went to do the erase and install it failed, so I tried again and it seems to have done the erase. now my actual HD isn't visible as the select detination to install?
    So, I can't actually even attempt to install with no destination.
    any help would be most appreciated.
    thankyou

    suzannah-a:
    Unfortunately, it seems as if your HDD has failed. Try booting from the install disk, the go to the Utilities menu and launch Disk Utility. If the HDD shows up in the sidebar, you should reformat it. (Directions below). If it does not show up, you need to replace the HDD. Post back for a list of available HDDs and vendors, step by step directions and additional tips.
    If your HDD shows up follow these directions to reformat and erase:
    Formatting, Partitioning Erasing a Hard Disk Drive
    Warning! This procedure will destroy all data on your Hard Disk Drive. Be sure you have an up-to-date, tested backup of at least your Users folder and any third party applications you do not want to re-install before attempting this procedure.
    Boot from the install CD holding down the "C" key.
    Select language
    • Go to the Utilities menu (Tiger) Installer menu (Panther & earlier) and launch Disk Utility.
    • Select your HDD (manufacturer ID) in left side bar.
    • Select Partition tab in main panel. (You are about to create a single partition volume.)
    • Click on Options button
    • Select Apple Partition Map (PPC Macs) or GUID Partition Table (Intel Macs)
    • Click OK
    • Select number of partition in pull-down menu above Volume diagram.
    (Note 1: One partition is normally preferable for an internal HDD.)
    • Type in name in Name field (usually Macintosh HD)
    • Select Volume Format as Mac OS Extended (Journaled)
    • Click Partition button at bottom of panel.
    • Select Erase tab
    • Select the sub-volume (indented) under Manufacturer ID (usually Macintosh HD).
    • Check to be sure your Volume Name and Volume Format are correct.
    • Click Erase button
    • Quit Disk Utility.
    If you are able to do the reformat and erase, you can then proceed to restore from your backup, or to install the OS from disk.
    Please do post back with an update on how it goes, and with further questions or comments, if any.
    cornelius

  • !!instaling problem please help!!

    hey i was trying to install starcraft on my macbook, it said that "you cannot open the application starcraft installer because it is not supported on this system. i want to know how to be able to install it, like what i have to do to fix it.
    please reply with suggestions. thank you in advance

    The System Requirements are PPC Looks like it may not install on Intel.
    You could install Windows 98. I wouldn't but you could.
    -mj
    [email protected]

  • 8.1.6 and designer 6i post install problem - please help

    Hello all,
    I installed designer following the install guide extremely closely. The install went off without a hitch. However, when I try to create and ERD, or any diagram, I receive this error:
    Message
    ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
    Message
    ORA-01400: cannot insert NULL into ("REPOS_OWNER"."I$SDD_DIAGRAM_SEGMENTS"."IRID")
    Message
    RME-02124: Failed to execute SQL statement: insert into I$SDD_DIAGRAM_SEGMENTS (DIAGRAM_REF, SEQUENCE, GRAPHICAL_DATA, PARENT_IVID, PAC_REF) values (:diag_id, :seq, :data, :diag_ivid, :diag_id)
    I'm fairly new to Oracle but I did have designer 6.0 working on 8.1.5.
    Does anyone have any suggestions?
    Thanks,
    Damon

    The same happened to me. It turns out that it had something to do with old windows registry entries that let the repository install program know that I had designer 6.0 previously installed on my system. The install apparently isn't wise enough to know that it is installing 6i. It checks the registry for the first Designer version identified and decides what repository components you need based on that. 6i uses the standard repository components (6.0 versions) and some new stuff.
    If you read your install documentation carefully (Chapter 2, Step 14, Item 2), you will note that you need to select two components to install. If the repository
    admin utility is <prior-version-aware> it neglect to even display one of those options and its easy to blow right past that screen without realizing something is amiss (that's what I did ;-P ).
    Hope this gets you going,
    As with any Oracle product install
    -- Good Luck!! --
    Sandi
    null

  • EMU 1820m install problem please help me I'm going crazy

    I've brought the EMU 1820m two days ago and for two days now I've been looking everywhere for an answer.
    So I plugged the card in the computer, I turn the power on and... Windows doesn't detect the card. I look on the net and apparently it's because I have to delete the previous sound card in the bios and desinstall them. OK. I do it.
    I reboot again and again and windows still doen't recognize it. Nothing. It's plugged but windows doesn't see anything.I look on the net for various solutions: trying a different PCI slot, changing where it's plugged to the power supply, nothing...
    I was so excited to buy this card and now the disappointment is even greater...... Can anybody help me???

    Windows doesn't detect anything... It's not listed in the device manager... I will try to find another computer to see if it works...
    By the way, the power supply cable has three plugs, one for the card, one for the power supply and one for the hard drive (if you don't have any cable left on the power supply)... Where do I plug it on the hard drive? I'm trying everything, I'm desesperate....

  • I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!, I'm getting an error message on Windows 8.  Missing apple application support.  Itunes will not install.  Please help!!

    You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
    you can download the itunes http://www.apple.com/itunes/ here
    then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
    you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

  • TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

    Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

    Try This...
    Close All Open Apps...  Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • [TV@Master] Problem please help

    I have Msi.mother board PT8-Neo -LSR ,  Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
    the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
    please help

    i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
    please read my reply again
    my operating system is win me and i have also another pc have XP
    when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
    but it give me this 2 mesages  when i try to install the driver
    MSI TV card is not found ,stop the installation
    the other message is
    MSI pvs driver installatin failed
    i download the driver from msi page also give me the same messages
    for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
    what to do now 

  • Cant download itunes, because ' there is an error with windows installer package' please help?

    cant download itunes, because ' there is an error with windows installer package' please help?

    I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

  • Iam getting the message firefox cannot be used coz i dont have usp10.dll.i use windows xp ..please help.

    dear folks
    After i downlaod and install firefox.. i get a message displayed ...as "this application has failed to start because usp10.dll was not found.Re-installing the application may fix this problem".Please help me fix this as i want to use firefox.I do have IE but with firefox it would be more comfortable.
    Thanks for the help rendered in advance
    Regards
    Sreenivaas

    I have a 5th generation 60GB iPod which I have been
    trying to update to software version 1.2 (from
    1.1.1.) but I keep getting the error message
    duplicated in the subject line of this post.
    I wouldn't mind to keep using V.1.1, except that I
    want to play a game I downçloaded from iTunes and
    which requires 1.2 to work.
    Any help?
    WK
      Windows XP  
    I have the exact same problem with mine only that it is 30GB and it has version 1.1.2 on it

  • X-Fi Fatal1ty Plat1num Champion Ed. problem, please help!

    9X-Fi Fatalty Platnum Champion Ed. problem, please help!? Hi there everyone,
    So i have a X-Fi Fatalty Platnum Champion Ed. and a computer with Windows 7.
    I've searched the web and i found many people saying that the card it's working and perfectly compatible so i would like to exclude this option as far as the problems that i'm having.
    So, right out of the box i've placed the front panel in with the ribbon cable and the power connected to it, then i connected the other end of the ribbon cable and finally placed the card in one of the PCI slots i have free.
    Now, when i start my PC, i don't hear any particolar "beep messages" but nothing will come on the screen, in few words my PC will not boot at all. I can hear the HDD spinning, everything sounds normal except for that "little" problem.
    So, i re-did all the connections thinking that maybe i did something wrong, but following the instruction i did exactly as told. So i tried again to power up the computer and i've noticed that the X-Fi logo is lit up (red light) and.. I don't really know if that means something or it's just something aside that doesn't really matter.. But, what is it's The PCI card is broken or there's something else?
    I did try to disable the sound card (integrated mobo sound) from the BIOS but that didn't change anything. I did try all the software options but this looks like more of an hardware problem (please correct me if i'm wrong and/or i've missed something).
    There's something that popped up in my mind.. the PSU. I noticed that i have a 300W PSU (mm.. low, isn't it's)?and i was wondering if that's enough or i need a more powerful one.. and if that's may be the case for the PCI to not work at all causing all i've already explained above. I mean.. It seems like i've installed a dead peripheral and that's impeding the computer to start up..
    I don't know.. I need clarification and help, PLEASE.
    Thank you very much in advance!

    Look at the beta thread sticked above but good luck waiting for a new driver. That beta driver has been there since January and although better than the normal driver it is still crap.
    All the boot type issues are with the SSD but if you getting in game crashes etc... under windows 8 that is simply that the driver stinks.

  • Numerous problems, please help

    Ok, I just recieved my 4gb nano and I put the CD in and follow the instructions to the letter, it says connect the ipod, and I do, and all is well, it installs iTunes and I go about putting songs into iTunes whilst letting my nano charge completely. After I'm done converting my music, I realize that ipod isn't listed on the resource list, so I disconnect it and reconnect, still nothing. I've tried the 5 r's or whatever like the hold > center/menu button thing, but it's to no avail. So I updated iTunes, and that didn't help. I uninstalled the ipod software from the computer, and reinstalled it, and here's where more problems insue. It says to connect the ipod to see if it needs formatting, when it finally recognizes it, it says it needs to be formatted so I click format, now, it says error connecting to ipod and I need to disconnect and reconnect, it may say that immediately, or may take several minutes. Mind you, it didn't do this when I initially installed the ipod and software. Another problem, I recently installed a USB 2.0 card, it works without a problem, I've used several other devices on it. But, one of the slots is the one it says error with immediately, the other one is the one it takes it's time with. Lastly, I've downloaded the new ipod software and tried to run it, but it keeps saying that ipod service isn't detected, or it can't connect to it or something along those lines.
    I'm running Windows XP Pro, please help.
    Windows XP Pro

    Well, I've now gotten back to the point where it's the iTunes problem again, my pc recognizes that my ipod is plugged in, but iTunes doesn't. And I tried updating the software, but it says that the ipod isn't supported.
    I guess this makes me more certain that I'm going to switch to OS X and get a powerbook. I highly doubt that Macs have these problems with ipods. I guess I could get mad at Apple and say it's their fault, but my guess is it's a software issue, one relating to XP, oh well.

Maybe you are looking for