Z97S SLi Krait Edition - Can't enable SLI?

Hi
I'm trying to enable SLI on my Z97S SLI Krait Edition. I have an EVGA 970 Superclocked ACX 2.0 in one slot, and an Asus Strix 970 in the other and I've connected the SLI Bridge. I can't enable in the Nvidia control panel. Does anyone have any suggestions please?
Thanks

This is what i would try;
-make sure slowest clocked card was in top slot but should make no difference tbh
-uninstall all nvidia drivers
-reboot in to safe mode
-run DDU http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
-reboot and install latest drivers as an admin even if you are one (right click, run as)
-enjoy sli (hopefully)
Edit- forgot to mention that you should also make sure you got the latest bios on the board
http://us.msi.com/support/mb/Z97S-SLI-Krait-Edition.html#down-bios

Similar Messages

  • MSI Z97S SLI Krait Edition

    MSI Z97S SLI Krait Edition
    why does the mother board not come equipped with an SLI connector??

    Already according to manual the board does not come with an SLI bridge. It is very aggressively priced considering being meant for modding setups (normally to be paid premium). As it is quite cutdown to make this happen packing content is like to be expected of entry-level Z97 boards of the same price range.
    Unfortunately unlike Nichrome said SLI bridges are never included with GeForce vgas so you'll need to get some from ebay or such. These are quite cheap.

  • Z97 SLI KRAIT EDITION POOR ACCESSORIES

    Hey all, just purchased a white and black krait edition for a new build, was going for gaming 7 but the style of this board just fit what i was building.
    Has anybody else purchased one of these and if so did you get a bundle of goodies in the box ???
    I have always gone with Asus in the past and have always had case badges, stickers etc etc in the box, MSI Krait nothing....
    I was hoping for at least a sticker with the krait design to assist my build but nothing, also no cmos jumper on the board, support tells me thats correct and i know its a tiny piece but how do you cross if cmos needs reset, anyway minor issues but just wondered what other people received, hope the 2 x 4g gtx970s  that are due any day have something in there lol

    No current board comes with a cmos jumper due to the already mentioned clear cmos button. Regarding accessorie note that the Krait edition is focussed on the clean look of it for casemodders' demand. Besides it is an entry level Z97 board and therefor being rather low priced for a Z97 board and offering the accessories to be expected on that price level. The Gaming 7 is a lot more expensive and therefor comes with more accessories. Hence you get what you pay for.

  • What a ....... fancontroller on a Msi Z97S SLI Krait

    Msi Z97S SLI Krait was a mb i quickly bought when my non msi mb had trouble booting.
    I regret it, what a crapy fancotroller, it makes my fans artic F12 PWM a bit to loud, sometimes when they are a bit loud i open command center and
    see fans running faster then i have set it to in bios and command center (the samme curve) and why is lower limited only 50% for case fans, i don't think it's low enough for ultra low noise fans that can rung 300-500 rpm.

    Also note that even external fan controllers (those which go to drive bay) also have minimum of 50% up to 100% of power. Or Off (which is noted by the manufacturer that you turn it off at your own risk as it may damage the fan(s) )

  • Can't enable Hybrid SLI in BIOS on K9N2GM-FD

    My HTCP is based on the MSI K9N2GM-FD, BIOS version 11. I want to use a 9800GTX in hybrid SLI for power saving, only used when I game etc. However, I can't enable Hybrid SLI in the BIOS - the option is greyed out. Doesn't matter if the onboard is enabled or disable, primary adapter or not; can't enable it.
    Anyone got any ideas?

    Your mainboard do not support Hybrid SLI according to mainboard specification:
    http://global.msi.com.tw/index.php?func=prodmbspec&prod_no=1460&maincat_no=1&cat2_no=&cat3_no=#menu
    In meantime in BIOS change log:
    http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1460
    - Enabled "HYBRID SLI" option in the BIOS.
    - Support "boot device" up to 12.
    And according to chipset used:
    http://www.nvidia.com/object/hybrid_sli_desktop.html
    It should be supported.
    Have a ask MSI here for clarify:
    http://ocss.msi.com.tw/
    "I can't enable Hybrid SLI in the BIOS - the option is greyed out."
    Use +/- Num Pad keys, or "PageUp", "PageDown" to adjust values.
    Add-on to read:
    http://www.nvidia.com/content/hsli/configurator/assets/pdf/NVIDIA_Hybrid_SLI_User_Guide.pdf

  • Msi x99s sli krait edition no post

    Hi All,
    i have tried to boot my new machine and i am unable to get post or post codes it seems to look as if it wants to post(boot) green powerbutton/reset button
    the monitor-light goes green indicating there is signal from the GPU but then goes orange again saying no signal i have pluged in a post speaker in and get no post beeps indicating an issue this is the second motherboard and processor i have tried with no success and the GPU worked in my z77 rig. I will try a different GPU tonight, any help would be much appreciated
    i have tried one stick of ram, bios b, inspected cpu pins (visually ok) and different 850 psu all to no avil.
    system specs are as follows
    msi x99s sli krait edition
    evga gtx970 sc
    i7 5820k
    16GB kingston hyper x (Kingston HX421C14FBK4/16 16GB)
    corsair hx850i (see pic for amps per rail)
    sm951(pcie ssd)
    samsung 840 evo
    WD 1tb green
    os 8.1 pro 64bit(never booted into win 8)
    bios:not sure unable to get post to check

    i have tried both boards with both bios and one stick at a time also tried multiple types and brands of graphics cards (asus strix gtx970 new out of box, evga sc gtx970 and and an old but known working nvidia 9500 gt) also tried them in different slots (ram and graphics) also tried an old(but working) antec 850w psu
    ps: all spare parts taken from working media pc 
     

  • MSI Z97S SLI +

    I like this board. It has 8 Sata III ports and I always liked MSI boards. But it has received mixed reviews. Should I buy this, or the equally priced ASRock Z97 Extreme4/Extreme6?
    The Extreme4/6 has USB key, where you stick a USB drive in to log in. Does the MSI board have that?
    Does it support 4-way SLI?
    Which should I buy?

    Quote from: flobelix on 03-July-14, 04:50:40
    This is the MSI HQ Users-to-Users Forum. Quite obvious that we won't discuss competing brands' products here. The MSI board is good so you can buy it if you want. As you are looking for a higher priced board too (extreme 6) you can also think about the equally priced MSI Z97-GD65 Gaming or MSI Z97 Gaming 7 which also offer a dual bios for maximum update safety.
    No Z97 board without an extra pci-e controller offers SLI with more than two cards as it takes 8 lanes per slot minimum and socket 1150 doesent offer enough lanes for more than 2 x 8 lanes. What the other brand means with quad-sli is using two dual gpu cards like GTX690 or Titan Z (two gpus on one card). To sli such is possible on any sli certified Z97 board (so also Z97S SLI PLUS).
    Thanks! I would rather spend the money on an MSI board, but the reason I chose the ASRock was because it is under $145 at my Microcenter store. The MSI SLI + isnt in my MC store  .

  • How can I enable the ability to create links when editing site text in BC?

    I am about to launch my first BC site for a client. I built the site using Muse. The client needs to update text and pics on their own using BC, which is fine, but when editing text, they are unable to create a link to another page. How can I enable the ability to create links when editing site text in BC? I can apparently do this in this post, but I don't see a way to do this for their site.

    Grid control should be used if you have multiple dbs to manage.
    But if you still want to install dbconsole, you can use dbca as already mentioned. it's much easier to do that using dbca.
    With the manual method, you create the repository via emca -repos create.
    Then you configure it using emca -config dbcontrol db. This will ask for sys passwords, ports setting etc...

  • How can I enable embedded pl/sql gateway to run on port 80

    I have a new 11G install on OEL 4.0, database created. I would like to be
    able to access the instance using the pl/sql gateway. Works fine with
    port 8080, the default. How to I enable it to run on port 80?
    I found this statement in the following docuementation:
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14259/xdb22pro.htm#ADXDB2500
    Using HTTP(S) on Nonstandard Ports
    By default, HTTP listens on a nonstandard, unprotected port: 8080. To use HTTP(S) on
    the standard port, such as 80, your DBA must chown the TNS listener to setuid ROOT
    rather than setuid ORACLE, and configure the port number in the Oracle XML DB
    configuration file /xdbconfig.xml.I have root priviledges on the box.
    I've tried setting the listener file permissions:
    chown root:dba /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    chmod 6775 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    Also put root in the dba group.
    The permissions turn out like this:
    -rwsr-sr-x 1 root dba 830854 Jun 17 21:04 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr
    I stopped the listener, bounced the database, and started the listener again.
    But it still shows the process being owned by oracle:
    oracle 29682 1 0 21:08 ? 00:00:00 /u01/app/oracle/product/11.1.0/db_1/bin/tnslsnr LISTENER -inherit
    Changing the port is easy:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    8080 2100
    At this point, I can access the apex home page with the following url:
    http://hostname:8080/apex/f?p=4550:10:1454849288245548
    I can than change it to port 80:
    SYS>begin
    dbms_xdb.sethttpport('80');
    dbms_xdb.setftpport('2100');
    end;
    2 3 4 5
    PL/SQL procedure successfully completed.
    SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    80 2100
    When I try to access apex with the following url:
    http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
    I get the following:
    Failed to Connect
    Firefox can't establish a connection to the server at hostname.com.
    Though the site seems valid, the browser was unable to establish a connection.
    * Could the site be temporarily unavailable? Try again later.
    * Are you unable to browse other sites? Check the computer's network connection.
    * Is your computer or network protected by a firewall or proxy? Incorrect settings
    * can interfere with Web browsing.I can set the port. Just can't talk to it.
    This is the entry from the listener log:
    <msg time='2008-07-03T15:40:09.741-06:00' org_id='oracle' comp_id='tnslsnr'
    type='UNKNOWN' level='16' host_id='hostname'
    host_addr='xxx.xxx.xxx.xxx'>
    <txt>TNS-12546: TNS:permission denied
    TNS-12560: TNS:protocol adapter error
    TNS-00516: Permission denied
    Linux Error: 13: Permission denied
    </txt>
    </msg>
    So this looks like an permissions problem. But where? I posted
    this on the apex forum here:
    Re: How can I enable embedded pl/sql gateway to run on port 80
    They suggested asking here.

    No, that thread did not provide the information that I need. Some more data:
    I have the port set to 8080:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    8080 2100
    At this point, I can access the apex home page with the following url:
    http://hostname:8080/apex/f?p=4550:10:1454849288245548
    I can than change it to port 80:
    SYS>begin
    dbms_xdb.sethttpport('80');
    dbms_xdb.setftpport('2100');
    end;
    2 3 4 5
    PL/SQL procedure successfully completed.
    SYS>SYS>select dbms_xdb.gethttpport as "HTTP-Port" , dbms_xdb.getftpport as "FTP-Port" from dual;
    HTTP-Port FTP-Port
    80 2100
    When I try to access apex with the following url:
    http://rmdcopslnx1.us.oracle.com/apex/f?p=4550:10:1454849288245548
    I get the following:
    Failed to Connect
    Firefox can't establish a connection to the server at hostname.com.
    Though the site seems valid, the browser was unable to establish a connection.
    * Could the site be temporarily unavailable? Try again later.
    * Are you unable to browse other sites? Check the computer's network connection.
    * Is your computer or network protected by a firewall or proxy? Incorrect settings can interfere with Web browsing.
    I can set the port. Just can't talk to it.

  • Can I enable battery percentage on my iPod touch 4th generation running iOS 5.1.1 without being jailbroken?

    Can I enable Battery percentage on my iPod touch 4th generation running iOS 5.1.1 without beig jailbroken?

    You can enable battery % on ipod touch 4g without jailbreaking it you can use backup bot for itunes. Thats how i enabled it on mine. Step 1: goto http://www.icopybot.com/ibackupbot_setup.exe download and install it if you have windows. Step 2: Next create a backup of your device in iTunes and then CLOSE iTunes (or else you may run into problems later on) do not lock the backup with a password. Step 3: Open iBackupBot. Click the backup you just made Next click "Path" to sort by Path. Step 4: Look for Library/Preferences/com.apple.springboard.plist and double click it. On the registration screen that comes up, hit cancel. Step 5: Find <dict> and create a new line after it. Then add this: 
    <key>SBShowBatteryLevel</key>
    <true/>
    Step 6: Hit CTRL + S or just the save button at the top left corner of that editor window. Now close the window.
    Step 7: Right click that same backup you just edited
    Step 8: click restore
    Step 9: Done! If you don't see the changes, reboot your iPod.
    Enjoy I hope you found this useful!

  • How can I enable coockies for localhost and file://?

    I've a web form used to perform various computation in javascript and display the results. The form use cookies to store usefull information, under desktop firefox I actived coockies for file:// but I can't find how I can do it for the mobile edition...
    do html5 localstorage can solve the issue? how can I enable them? I fully understand the risk of having local file cookies enabled...

    thank you, I must find something else so I can restrict them from others.

  • How can I enable session(using url)  tracking in home page

    i am developing bidding application. How can I enable session(using url) tracking in home page ?
    for example :
    http://mydomine.com/index.jsp;jsessionid=4A38A4496F6862681DFD09CD6D648485.tomcat75
    please help me.

    Doubleposted. Please continue here: [http://forum.java.sun.com/thread.jspa?threadID=5308686&tstart=0]
    In the future, do not use the back button to edit the message, but use the edit button instead. Otherwise you're reposting the form again. You should know that better as being a web developer.

  • How can i enable snmp V1/V2 in MAC OS 10.8.2

    How can i enable snmp V1/V2 in MAC OS 10.8.2 . Please help me out ,  I am unable to enable snmp agent or client in MAC OS.

    First edit /etc/snmp/snmpd.conf as applicable. Then:
    sudo launchctl load -w /System/Library/LaunchDaemons/org.net-snmp.snmpd.plist

  • Can't enable SyncBO

    hi.
    i am using MI 2.5 SP09 and i'm trying the syncbo tutorial.  Unfortunately, at the step where i have to enable my syncbo, the "enabled" checkbox is still gray/read-only (in change mode).  the only checkboxes that are editable are "push", "check types", "save data", "handler" and "badi".
    i'm running on a WAS 6.40 SP12.  the status light for the syncbo object in the merep_pd transaction on the "synchornizer" tab is yellow.  i'm presuming that it should be green in order for the "enable" checkbox to be selectable.
    what am i missing to make it green?  or what can i check to see why it is yellow so that i can fix it so that it can be enabled.
    thanks.
    mike

    Hi Mike,
      Yes, if the syncBO is a timed 2-way (T01) it must be replicated once before you can enable it (This allows the replication DB to be initialized), other syncBO's can be enabled right away.
      I'm a little confused on how you have MI 2.5 sp09 on a WAS 6.40 SP12 but that shouldnt effect how you replicate/Generate/or enable the SyncBO's
    Good luck,
    Wael

  • Can you enable AHCI in Windows 7 on a MacBook Air 11"?

    i know people have enabled AHCI in MB Pro's. there's a bunch of information regarding that laptop. i've tried to follow those directions but AHCI just won't turn on. i'm wondering if the PCI IDE Controller just doesn't support AHCI or if i'm doing something wrong.
    does anyone have any information regarding this matter?
    thanks in advance.

    Apple uses a proprietary extensions for perfectly standart, even a bit outdated base EFI. Big difference with proprietary efi. Just for you to know - you can grab (opensorced, standart) UEFI, compile it yourself in MS Visual Studio under windows and Apple's extensions will perfectly load into it at runtime.
    I'd recommend you read this:
    http://msdn.microsoft.com/en-us/windows/hardware/gg463525
    exactly pay attention to this:
    * The GUID Partition Table (GPT) was introduced as part of the Unified Extensible Firmware Interface (UEFI) initiative.
    and than - this:
    Windows XP x64 Edition can use GPT disks for data only.
    The 32-bit version will see only the Protective MBR. The EE partition will not be mounted or otherwise exposed to application software.
    Starting with Windows Server 2003 Service Pack 1, all versions of Windows Server can use GPT partitioned disks for data. Booting is only supported for 64-bit editions on Itanium-based systems.
    Can Windows 7, Windows Vista, and Windows Server 2008 read, write, and boot from GPT disks?
    Yes, all versions can use GPT partitioned disks for data. Booting is only supported for 64-bit editions on UEFI-based systems.
    Last one sounds good, yes? Actually no:
    Windows GPT Required Partitions
    EFI System Partition
    What is the Extensible Firmware Interface System Partition (ESP)?
    The ESP contains the NTLDR, HAL, Boot.txt, and other files… blabla
    Do you really think that NTLDR, HAL, Boot.txt are parts of OS-independent UEFI standart?
    Can there be two ESPs on a single disk?
    Such a configuration should not be created and is not supported in Windows.
    So Apple just can not create special win-specific partition for Windows to load directly - it just does not support it
    Microsoft Reserved Partition
    What disks require an MSR?
    Every GPT disk must contain an MSR. The order of partitions on the disk should be ESP (if any), OEM (if any) and MSR followed by primary data partition(s). It is particularly important that the MSR be created before other primary data partitions.
    Do you really think that Microsoft Reserved Partition is a part of OS-independent GUID GPT standart?
    Q.          Who creates the MSR?
    The MSR must be created when disk-partitioning information is first written to the drive. If the manufacturer partitions the disk, the manufacturer must create the MSR at the same time.
    So for windows to boot directly, Apple should themselves create windows non-standard partition on every mac sold.
    And, furthermore, it (Apple) have to install NTLDR, HAL, Boot.txt and other MS crap on every mac. Paying license fee for that.
    It's not my fantasies - it's open data from Windows Hardware Developer Center > Learn > Devices > Storage Technologies > Windows and GPT FAQ of MS itself.
    And same story you can find about UEFI support on Windows. Non-standard things required here and there.
    Do you know that Linux can boot on macs directly, as it doesn't require some MSR sh*t and such?
    There are a lot of things to blame Apple, but not this one

Maybe you are looking for