Zbook 14 ultraslim docking station Windows 10 problem
Hello, having problems with my notebook using ultraslim docking station since installation of Windows 10.All drivers given from HP-Drivers-Website for Windows 10 were installed. New Bios 01.32 (Win10 support)! issue:- If notebook is in the docking station pc doesnt recognize external monitor! After serveral restarts external monitor works. Here it seems the graphic card doesnt switch from intel to AMD. - If notebook goes to sleepmode it can never wake. Notebook will restart automatically Does anyone have the same problem? regardsel
I have the same problem , in my case if I start the laptop with the screen open, the notebook recognizes the monitor VGA, if I start with the display closed does not recognize the VGA monitor and the device manager indicates an error in the graphics card Intel. If I open or close the screen with the computer turned on, crashes and restarts.
The Display Port always recognizes the monitor. vmm
Similar Messages
-
Broke docking station; Windows won't recognize Shuffle
Okay, so the connector in the docking station became loose today. I put my shuffle on it and tried to connect to the computer -- nothing. So I went and bought a "USB Travel dock" which is specifically for 2nd generation shuffles. When I connect my Ipod, an orange light blinks twice and then nothing. Windows says it's an unknown device. I've tried the reset utility and it doesn't recognize the shuffle either. I've tried resetting to no avail.
The Ipod, itself, works fine, as I was using it earlier, but now the battery needs to be charged and it's looking impossible to connect or charge it. I'm thinking I may have damaged the part where you plug it into the dock, but my headphones work fine when I plug them in the same hole. =/ I have no idea.was having this problem among others. Found that I could see it in windows explorer but only as an additional disk but nothing in itunes. reformatted in windows, used updater then ejected from explorer. when fires up itunes and then reconnected ipod - it found it.
-
2013 Ultraslim docking station drivers
Does anyone know where to find drivers for this docking station? The Hp support page is empty and the docking station will not transmit sound.
Yes, you can use the one you mentioned.
If you use a lower one then you will have to turn off the unit and charge or it may not charge at all.
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution" -
T61p docking station/ethernet cable problem
When placed in the mini docking station, my T61p laptop fails to recognize the Ethernet cable connected to the dock itself. To successfully use an Ethernet connection the cable must be connected directly to the Ethernet port on the thinkpad and the thinkpad must not be placed in the docking station (so the purpose of the docking station is completely defeated). How can I successfully make an Ethernet connection through the docking station? At this point USB and screen connections all work fine. Thanks for any help.
Most likely a drivers issue...
Go to Lenovo site http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67829 and download Intel PRO/1000 LAN Adapter Software driver.
Version: 9.12.41.1001 Release Date: 2009/05/19
Steps to take:
Select Control Pannel
Click Administrative Tools
Click Computer Management
Scroll and expand "Device Manager"
Expand Network Adopters
Check if Intel Gigabit Network Connection is (enabled/disabled)
If Disabled, enable (right click and enable)
Here you can also uninstall,
then from the above site, download the driver and install,
then repeat earlier steps and enable adaptor
That should work for you, with or without the driver. -
HP Zbook 15, external monitor connected to docking station issue
Dear all
I have bought a HP Zbook 15 laptop and installed Ubuntu 12.04. It does not show anything on the external monitor when I mount the laptop on the docking station.
After installing the Ubuntu 12.04 and putting it on the docking station for the first time, I got this problem:
"If an ACPI driver is available for this device, you should use it instead of the native driver". I have attached the whole log file. Then, I installed the latest Nvidia driver, and restarted the machine. This time, I do not see that error message; however, I cannot see anything on my external monitor which is connected to the docking station. Can you please tell me how to fix this problem?
Best regards,
Murtaza
I did not find a way to attach the log file, so I put it here:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-32-generic (buildd@phianna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #57~precise1-Ubuntu SMP Tue Jul 15 03:51:20 UTC 2014 (Ubuntu 3.13.0-32.57~precise1-generic 3.13.11.4)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000044b7efff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000044b7f000-0x0000000045e7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000045e7f000-0x0000000045f7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000045f7f000-0x0000000045ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000045fff000-0x0000000045ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000046000000-0x000000004f1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000004aedfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP ZBook 15/1909, BIOS L70 Ver. 01.30 12/08/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x4aee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
[ 0.000000] 1 base 0000000000 mask 7FC0000000 write-back
[ 0.000000] 2 base 0040000000 mask 7FFC000000 write-back
[ 0.000000] 3 base 0044000000 mask 7FFE000000 write-back
[ 0.000000] 4 base 0046000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
[ 0.000000] 7 base 0400000000 mask 7F80000000 write-back
[ 0.000000] 8 base 0480000000 mask 7FC0000000 write-back
[ 0.000000] 9 base 04B0000000 mask 7FF0000000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x46000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x4aec00000-0x4aedfffff]
[ 0.000000] [mem 0x4aec00000-0x4aedfffff] page 2M
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x4ac000000-0x4aebfffff]
[ 0.000000] [mem 0x4ac000000-0x4aebfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x480000000-0x4abffffff]
[ 0.000000] [mem 0x480000000-0x4abffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x44b7efff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x449fffff] page 2M
[ 0.000000] [mem 0x44a00000-0x44b7efff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x45fff000-0x45ffffff]
[ 0.000000] [mem 0x45fff000-0x45ffffff] page 4k
[ 0.000000] BRK [0x01fe7000, 0x01fe7fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x47fffffff]
[ 0.000000] [mem 0x100000000-0x47fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x35be0000-0x36de7fff]
[ 0.000000] ACPI: RSDP 00000000000f3060 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0000000045ffe120 0000A4 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0000000045ffc000 00010C (v05 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: DSDT 0000000045fd1000 0257CC (v02 HPQOEM 1909 00000001 INTL 20110112)
[ 0.000000] ACPI: FACS 0000000045e31000 000040
[ 0.000000] ACPI: HPET 0000000045ffb000 000038 (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0000000045ffa000 0000BC (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0000000045ff9000 00003C (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0000000045ff7000 000032 (v02 HPQOEM 1909 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0000000045fce000 000466 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fcd000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[ 0.000000] ACPI: SLIC 0000000045fcc000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
[ 0.000000] ACPI: FPDT 0000000045fca000 000044 (v01 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0000000045fc9000 000038 (v00 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0000000045fc3000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fc2000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fc1000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fc0000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0000000045fbd000 002F11 (v01 HP NVSGTBL 00001000 INTL 20110112)
[ 0.000000] ACPI: ASF! 0000000045ff8000 0000A5 (v32 HPQOEM 1909 00000001 HP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000004aedfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x4aedfffff]
[ 0.000000] NODE_DATA [mem 0x4aedf9000-0x4aedfdfff]
[ 0.000000] [ffffea0000000000-ffffea0012bfffff] PMD -> [ffff88049e600000-ffff8804ae3fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x4aedfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x44b7efff]
[ 0.000000] node 0: [mem 0x45fff000-0x45ffffff]
[ 0.000000] node 0: [mem 0x100000000-0x4aedfffff]
[ 0.000000] On node 0 totalpages: 4143388
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4334 pages used for memmap
[ 0.000000] DMA32 zone: 277376 pages, LIFO batch:31
[ 0.000000] Normal zone: 60344 pages used for memmap
[ 0.000000] Normal zone: 3862016 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x44b7f000-0x45e7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45e7f000-0x45f7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x45f7f000-0x45ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x46000000-0x4f1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x4f200000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0x4f200000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff8804aea00000 s86336 r8192 d24256 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4078625
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-32-generic root=UUID=062ea7e8-5c86-4852-ba25-0372be603607 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16211348K/16573552K available (7602K kernel code, 1137K rwdata, 3484K rodata, 1356K init, 1440K bss, 362204K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 66584576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.008000] tsc: PIT calibration matches HPET. 1 loops
[ 0.008000] tsc: Detected 2693.754 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=10775016)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000024] Security Framework initialized
[ 0.000038] AppArmor: AppArmor initialized
[ 0.000039] Yama: becoming mindful.
[ 0.000989] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.003366] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.004363] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004378] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004573] Initializing cgroup subsys memory
[ 0.004578] Initializing cgroup subsys devices
[ 0.004579] Initializing cgroup subsys freezer
[ 0.004581] Initializing cgroup subsys blkio
[ 0.004582] Initializing cgroup subsys perf_event
[ 0.004584] Initializing cgroup subsys hugetlb
[ 0.004602] CPU: Physical Processor ID: 0
[ 0.004603] CPU: Processor Core ID: 0
[ 0.004607] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.004607] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.005456] mce: CPU supports 9 MCE banks
[ 0.005469] CPU0: Thermal monitoring enabled (TM1)
[ 0.005479] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.005479] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.005479] tlb_flushall_shift: 6
[ 0.005975] Freeing SMP alternatives memory: 32K (ffffffff81e71000 - ffffffff81e79000)
[ 0.006826] ACPI: Core revision 20131115
[ 0.015427] ACPI: All ACPI Tables successfully acquired
[ 0.015707] ftrace: allocating 31443 entries in 123 pages
[ 0.027389] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067059] smpboot: CPU0: Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz (fam: 06, model: 3c, stepping: 03)
[ 0.067065] TSC deadline timer enabled
[ 0.067072] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.067078] ... version: 3
[ 0.067079] ... bit width: 48
[ 0.067079] ... generic registers: 4
[ 0.067080] ... value mask: 0000ffffffffffff
[ 0.067081] ... max period: 0000ffffffffffff
[ 0.067082] ... fixed-purpose events: 3
[ 0.067082] ... event mask: 000000070000000f
[ 0.068367] x86: Booting SMP configuration:
[ 0.082362] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.068369] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.166721] x86: Booted up 1 node, 8 CPUs
[ 0.166724] smpboot: Total of 8 processors activated (43100.06 BogoMIPS)
[ 0.174163] devtmpfs: initialized
[ 0.177951] EVM: security.selinux
[ 0.177953] EVM: security.SMACK64
[ 0.177953] EVM: security.ima
[ 0.177954] EVM: security.capability
[ 0.177989] PM: Registering ACPI NVS region [mem 0x45e7f000-0x45f7efff] (1048576 bytes)
[ 0.178592] pinctrl core: initialized pinctrl subsystem
[ 0.178637] regulator-dummy: no parameters
[ 0.178663] RTC time: 20:49:45, date: 04/17/15
[ 0.178689] NET: Registered protocol family 16
[ 0.178764] cpuidle: using governor ladder
[ 0.178766] cpuidle: using governor menu
[ 0.178795] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.178796] ACPI: bus type PCI registered
[ 0.178798] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.178847] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.178849] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.194702] PCI: Using configuration type 1 for base access
[ 0.194961] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.194962] mtrr: probably your BIOS does not setup all CPUs.
[ 0.194963] mtrr: corrected configuration.
[ 0.195520] bio: create slab <bio-0> at 0
[ 0.195643] ACPI: Added _OSI(Module Device)
[ 0.195645] ACPI: Added _OSI(Processor Device)
[ 0.195645] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.195646] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.218003] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.246072] ACPI: SSDT 0000000045de3918 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.246512] ACPI: Dynamic OEM Table Load:
[ 0.246513] ACPI: SSDT (null) 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.250171] ACPI: SSDT 0000000045de4698 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.250664] ACPI: Dynamic OEM Table Load:
[ 0.250666] ACPI: SSDT (null) 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.254062] ACPI: SSDT 0000000045de2d98 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 0.254498] ACPI: Dynamic OEM Table Load:
[ 0.254499] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 2.268291] ACPI: Interpreter enabled
[ 2.268297] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 2.268302] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 2.268314] ACPI: (supports S0 S3 S4 S5)
[ 2.268315] ACPI: Using IOAPIC for interrupt routing
[ 2.268332] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.268475] ACPI: No dock devices found.
[ 2.270541] ACPI: Power Resource [APPR] (off)
[ 2.287340] ACPI: Power Resource [COMP] (on)
[ 2.287629] ACPI: Power Resource [LPP] (on)
[ 2.296206] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 2.296211] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 2.296871] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 2.297740] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 2.298295] PCI host bridge to bus 0000:00
[ 2.298297] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 2.298299] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.298300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.298301] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.298302] pci_bus 0000:00: root bus resource [mem 0x4f200000-0xdfffffff]
[ 2.298304] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff]
[ 2.298305] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff]
[ 2.298311] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 2.298395] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 2.298423] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.298494] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 2.298503] pci 0000:00:02.0: reg 0x10: [mem 0xcc400000-0xcc7fffff 64bit]
[ 2.298508] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.298512] pci 0000:00:02.0: reg 0x20: [io 0x6000-0x603f]
[ 2.298605] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 2.298620] pci 0000:00:14.0: reg 0x10: [mem 0xcca20000-0xcca2ffff 64bit]
[ 2.298666] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.298721] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.298748] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 2.298767] pci 0000:00:16.0: reg 0x10: [mem 0xcca35000-0xcca3500f 64bit]
[ 2.298825] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.298896] pci 0000:00:16.3: [8086:8c3d] type 00 class 0x070002
[ 2.298911] pci 0000:00:16.3: reg 0x10: [io 0x60b0-0x60b7]
[ 2.298919] pci 0000:00:16.3: reg 0x14: [mem 0xcca3c000-0xcca3cfff]
[ 2.299046] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 2.299061] pci 0000:00:19.0: reg 0x10: [mem 0xcca00000-0xcca1ffff]
[ 2.299069] pci 0000:00:19.0: reg 0x14: [mem 0xcca3b000-0xcca3bfff]
[ 2.299076] pci 0000:00:19.0: reg 0x18: [io 0x6080-0x609f]
[ 2.299131] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 2.299180] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 2.299207] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 2.299225] pci 0000:00:1a.0: reg 0x10: [mem 0xcca3a000-0xcca3a3ff]
[ 2.299306] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 2.299357] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 2.299384] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 2.299397] pci 0000:00:1b.0: reg 0x10: [mem 0xcca30000-0xcca33fff 64bit]
[ 2.299455] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.299525] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 2.299590] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.299664] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 2.299721] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.299772] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 2.299795] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 2.299853] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 2.299904] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 2.299928] pci 0000:00:1c.7: [8086:8c1e] type 01 class 0x060400
[ 2.299986] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 2.300037] pci 0000:00:1c.7: System wakeup disabled by ACPI
[ 2.300063] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 2.300083] pci 0000:00:1d.0: reg 0x10: [mem 0xcca39000-0xcca393ff]
[ 2.300163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.300215] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2.300241] pci 0000:00:1f.0: [8086:8c4f] type 00 class 0x060100
[ 2.300400] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 2.300414] pci 0000:00:1f.2: reg 0x10: [io 0x60a8-0x60af]
[ 2.300421] pci 0000:00:1f.2: reg 0x14: [io 0x60bc-0x60bf]
[ 2.300428] pci 0000:00:1f.2: reg 0x18: [io 0x60a0-0x60a7]
[ 2.300435] pci 0000:00:1f.2: reg 0x1c: [io 0x60b8-0x60bb]
[ 2.300442] pci 0000:00:1f.2: reg 0x20: [io 0x6060-0x607f]
[ 2.300448] pci 0000:00:1f.2: reg 0x24: [mem 0xcca38000-0xcca387ff]
[ 2.300482] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.300546] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 2.300560] pci 0000:00:1f.3: reg 0x10: [mem 0xcca34000-0xcca340ff 64bit]
[ 2.300578] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
[ 2.300706] pci 0000:01:00.0: [10de:11fc] type 00 class 0x030000
[ 2.300719] pci 0000:01:00.0: reg 0x10: [mem 0xcb000000-0xcbffffff]
[ 2.300733] pci 0000:01:00.0: reg 0x14: [mem 0x50000000-0x5fffffff 64bit pref]
[ 2.300746] pci 0000:01:00.0: reg 0x1c: [mem 0x60000000-0x61ffffff 64bit pref]
[ 2.300755] pci 0000:01:00.0: reg 0x24: [io 0x5000-0x507f]
[ 2.300763] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 2.300868] pci 0000:01:00.1: [10de:0e0b] type 00 class 0x040300
[ 2.300883] pci 0000:01:00.1: reg 0x10: [mem 0xcc000000-0xcc003fff]
[ 2.306710] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.306712] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 2.306714] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
[ 2.306717] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
[ 2.306776] acpiphp: Slot [1] registered
[ 2.306781] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 2.306787] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
[ 2.306792] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
[ 2.306850] acpiphp: Slot [1-1] registered
[ 2.306888] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
[ 2.306892] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 2.306895] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
[ 2.306998] pci 0000:5c:00.0: [8086:088e] type 00 class 0x028000
[ 2.307064] pci 0000:5c:00.0: reg 0x10: [mem 0xcc900000-0xcc901fff 64bit]
[ 2.307300] pci 0000:5c:00.0: PME# supported from D0 D3hot D3cold
[ 2.314738] pci 0000:00:1c.6: PCI bridge to [bus 5c]
[ 2.314743] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
[ 2.314860] pci 0000:5d:00.0: [10ec:5249] type 00 class 0xff0000
[ 2.314923] pci 0000:5d:00.0: reg 0x10: [mem 0xcc800000-0xcc800fff]
[ 2.315269] pci 0000:5d:00.0: supports D1 D2
[ 2.315270] pci 0000:5d:00.0: PME# supported from D1 D2 D3hot D3cold
[ 2.322736] pci 0000:00:1c.7: PCI bridge to [bus 5d]
[ 2.322741] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
[ 2.322799] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 2.323663] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323700] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323768] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 2.323802] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 2.323835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.323869] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 2.323903] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.324240] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 2.324246] ACPI: \_SB_.PCI0: notify handler is installed
[ 2.324298] Found 1 acpi root devices
[ 2.324457] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 2.324517] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.324521] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.324522] vgaarb: loaded
[ 2.324523] vgaarb: bridge control possible 0000:01:00.0
[ 2.324524] vgaarb: no bridge control possible 0000:00:02.0
[ 2.324635] SCSI subsystem initialized
[ 2.324664] libata version 3.00 loaded.
[ 2.324678] ACPI: bus type USB registered
[ 2.324688] usbcore: registered new interface driver usbfs
[ 2.324693] usbcore: registered new interface driver hub
[ 2.324707] usbcore: registered new device driver usb
[ 2.324786] PCI: Using ACPI for IRQ routing
[ 2.330294] PCI: pci_cache_line_size set to 64 bytes
[ 2.330342] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[ 2.330343] e820: reserve RAM buffer [mem 0x44b7f000-0x47ffffff]
[ 2.330345] e820: reserve RAM buffer [mem 0x46000000-0x47ffffff]
[ 2.330346] e820: reserve RAM buffer [mem 0x4aee00000-0x4afffffff]
[ 2.330402] NetLabel: Initializing
[ 2.330403] NetLabel: domain hash size = 128
[ 2.330403] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.330412] NetLabel: unlabeled traffic allowed by default
[ 2.330452] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.330457] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.332489] Switched to clocksource hpet
[ 2.335878] AppArmor: AppArmor Filesystem Enabled
[ 2.335891] pnp: PnP ACPI init
[ 2.335898] ACPI: bus type PNP registered
[ 2.336030] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.336032] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved
[ 2.336033] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.336035] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.336036] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.336037] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.336039] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.336040] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.336042] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.336043] system 00:00: [mem 0x4f210000-0x4f21ffff] has been reserved
[ 2.336045] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.336141] pnp 00:01: [dma 4]
[ 2.336154] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.336171] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.336216] pnp 00:03: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 2.336288] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.336322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.336351] system 00:06: [io 0x0200-0x027f] has been reserved
[ 2.336353] system 00:06: [io 0xffff] has been reserved
[ 2.336354] system 00:06: [io 0xffff] has been reserved
[ 2.336355] system 00:06: [io 0xffff] has been reserved
[ 2.336357] system 00:06: [io 0x1800-0x18fe] could not be reserved
[ 2.336358] system 00:06: [io 0xef80-0xef9f] has been reserved
[ 2.336360] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.336393] system 00:07: [io 0x0800-0x087f] has been reserved
[ 2.336395] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.336413] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.336712] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
[ 2.336939] pnp 00:0a: [dma 0 disabled]
[ 2.336985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 2.337008] pnp 00:0b: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 2.337027] pnp 00:0c: Plug and Play ACPI device, IDs SYN300a SYN0100 SYN0002 PNP0f13 (active)
[ 2.337195] pnp 00:0d: Plug and Play ACPI device, IDs HPQ6007 (active)
[ 2.337255] system 00:0e: [mem 0x20000000-0x201fffff] could not be reserved
[ 2.337257] system 00:0e: [mem 0x40004000-0x40004fff] could not be reserved
[ 2.337259] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.337398] pnp: PnP ACPI: found 15 devices
[ 2.337399] ACPI: bus type PNP unregistered
[ 2.343175] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 2.343188] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02-3a] add_size 1000
[ 2.343196] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3b-5b] add_size 200000
[ 2.343209] pci 0000:00:1c.7: bridge window [io 0x1000-0x0fff] to [bus 5d] add_size 1000
[ 2.343210] pci 0000:00:1c.7: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 5d] add_size 200000
[ 2.343215] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 2.343216] pci 0000:00:1c.7: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 2.343217] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 2.343219] pci 0000:00:1c.7: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 2.343222] pci 0000:00:1c.4: BAR 15: assigned [mem 0x4f300000-0x4f4fffff 64bit pref]
[ 2.343224] pci 0000:00:1c.7: BAR 15: assigned [mem 0x4f500000-0x4f6fffff 64bit pref]
[ 2.343225] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 2.343227] pci 0000:00:1c.7: BAR 13: assigned [io 0x7000-0x7fff]
[ 2.343229] pci 0000:01:00.0: BAR 6: assigned [mem 0xcc080000-0xcc0fffff pref]
[ 2.343231] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.343233] pci 0000:00:01.0: bridge window [io 0x5000-0x5fff]
[ 2.343235] pci 0000:00:01.0: bridge window [mem 0xcb000000-0xcc0fffff]
[ 2.343237] pci 0000:00:01.0: bridge window [mem 0x50000000-0x61ffffff 64bit pref]
[ 2.343240] pci 0000:00:1c.0: PCI bridge to [bus 02-3a]
[ 2.343243] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 2.343247] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xca0fffff]
[ 2.343251] pci 0000:00:1c.0: bridge window [mem 0x70000000-0x91ffffff 64bit pref]
[ 2.343256] pci 0000:00:1c.4: PCI bridge to [bus 3b-5b]
[ 2.343259] pci 0000:00:1c.4: bridge window [io 0x3000-0x4fff]
[ 2.343263] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb3ffffff]
[ 2.343267] pci 0000:00:1c.4: bridge window [mem 0x4f300000-0x4f4fffff 64bit pref]
[ 2.343272] pci 0000:00:1c.6: PCI bridge to [bus 5c]
[ 2.343276] pci 0000:00:1c.6: bridge window [mem 0xcc900000-0xcc9fffff]
[ 2.343283] pci 0000:00:1c.7: PCI bridge to [bus 5d]
[ 2.343285] pci 0000:00:1c.7: bridge window [io 0x7000-0x7fff]
[ 2.343289] pci 0000:00:1c.7: bridge window [mem 0xcc800000-0xcc8fffff]
[ 2.343293] pci 0000:00:1c.7: bridge window [mem 0x4f500000-0x4f6fffff 64bit pref]
[ 2.343298] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.343300] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.343301] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.343302] pci_bus 0000:00: resource 7 [mem 0x4f200000-0xdfffffff]
[ 2.343303] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff]
[ 2.343304] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff]
[ 2.343306] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 2.343307] pci_bus 0000:01: resource 1 [mem 0xcb000000-0xcc0fffff]
[ 2.343308] pci_bus 0000:01: resource 2 [mem 0x50000000-0x61ffffff 64bit pref]
[ 2.343309] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 2.343311] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xca0fffff]
[ 2.343312] pci_bus 0000:02: resource 2 [mem 0x70000000-0x91ffffff 64bit pref]
[ 2.343313] pci_bus 0000:3b: resource 0 [io 0x3000-0x4fff]
[ 2.343314] pci_bus 0000:3b: resource 1 [mem 0xb0000000-0xb3ffffff]
[ 2.343315] pci_bus 0000:3b: resource 2 [mem 0x4f300000-0x4f4fffff 64bit pref]
[ 2.343317] pci_bus 0000:5c: resource 1 [mem 0xcc900000-0xcc9fffff]
[ 2.343318] pci_bus 0000:5d: resource 0 [io 0x7000-0x7fff]
[ 2.343319] pci_bus 0000:5d: resource 1 [mem 0xcc800000-0xcc8fffff]
[ 2.343320] pci_bus 0000:5d: resource 2 [mem 0x4f500000-0x4f6fffff 64bit pref]
[ 2.343341] NET: Registered protocol family 2
[ 2.343489] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.343658] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.343769] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.343782] TCP: reno registered
[ 2.343798] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.343840] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.343907] NET: Registered protocol family 1
[ 2.343916] pci 0000:00:02.0: Boot video device
[ 2.343923] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 2.344387] PCI: CLS 64 bytes, default 64
[ 2.344426] Trying to unpack rootfs image as initramfs...
[ 2.581584] Freeing initrd memory: 18464K (ffff880035be0000 - ffff880036de8000)
[ 2.581588] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.581590] software IO TLB [mem 0x40b7f000-0x44b7f000] (64MB) mapped at [ffff880040b7f000-ffff880044b7efff]
[ 2.581814] microcode: CPU0 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581821] microcode: CPU1 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581827] microcode: CPU2 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581834] microcode: CPU3 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581839] microcode: CPU4 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581845] microcode: CPU5 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581851] microcode: CPU6 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581858] microcode: CPU7 sig=0x306c3, pf=0x10, revision=0x16
[ 2.581891] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 2.581892] Scanning for low memory corruption every 60 seconds
[ 2.582096] Initialise system trusted keyring
[ 2.582129] audit: initializing netlink socket (disabled)
[ 2.582137] type=2000 audit(1429303787.580:1): initialized
[ 2.605505] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.606581] zbud: loaded
[ 2.606685] VFS: Disk quotas dquot_6.5.2
[ 2.606715] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.606997] fuse init (API version 7.22)
[ 2.607048] msgmni has been set to 31698
[ 2.607084] Key type big_key registered
[ 2.607458] Key type asymmetric registered
[ 2.607459] Asymmetric key parser 'x509' registered
[ 2.607478] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.607514] io scheduler noop registered
[ 2.607516] io scheduler deadline registered (default)
[ 2.607531] io scheduler cfq registered
[ 2.607686] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.608087] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.608097] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.608122] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[ 2.608123] vesafb: scrolling: redraw
[ 2.608124] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.608661] vesafb: framebuffer at 0xa0000000, mapped to 0xffffc90011c00000, using 8128k, total 8128k
[ 2.763515] Console: switching to colour frame buffer device 240x67
[ 2.917758] fb0: VESA VGA frame buffer device
[ 2.917770] intel_idle: MWAIT substates: 0x42120
[ 2.917771] intel_idle: v0.4 model 0x3C
[ 2.917771] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.917911] ipmi message handler version 39.2
[ 2.918057] ACPI: AC Adapter [AC] (on-line)
[ 2.918197] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[ 2.918201] ACPI: Sleep Button [SLPB]
[ 2.918223] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.918238] ACPI: Lid Switch [LID]
[ 2.918260] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 2.918261] ACPI: Power Button [PWRF]
[ 2.943141] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.943143] ACPI: Thermal Zone [CPUZ] (49 C)
[ 2.957429] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 2.957433] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
[ 2.957437] ACPI Error: Method parse/execution failed [\_TZ_.GFXZ._PSL] (Node ffff88049846d000), AE_NOT_FOUND (20131115/psparse-536)
[ 2.957440] ACPI: Invalid passive threshold
[ 2.967568] thermal LNXTHERM:01: registered as thermal_zone1
[ 2.967569] ACPI: Thermal Zone [GFXZ] (36 C)
[ 2.982819] thermal LNXTHERM:02: registered as thermal_zone2
[ 2.982820] ACPI: Thermal Zone [EXTZ] (0 C)
[ 2.998086] thermal LNXTHERM:03: registered as thermal_zone3
[ 2.998087] ACPI: Thermal Zone [LOCZ] (0 C)
[ 3.003351] ACPI Error: [CFGD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
[ 3.003354] ACPI Error: Method parse/execution failed [\_TZ_.PSL_] (Node ffff88049846d410), AE_NOT_FOUND (20131115/psparse-536)
[ 3.003357] ACPI Error: Method parse/execution failed [\_TZ_.BATZ._PSL] (Node ffff88049846d230), AE_NOT_FOUND (20131115/psparse-536)
[ 3.003360] ACPI: Invalid passive threshold
[ 3.013372] thermal LNXTHERM:04: registered as thermal_zone4
[ 3.013374] ACPI: Thermal Zone [BATZ] (28 C)
[ 3.013559] thermal LNXTHERM:05: registered as thermal_zone5
[ 3.013560] ACPI: Thermal Zone [PCHZ] (59 C)
[ 3.013623] thermal LNXTHERM:06: registered as thermal_zone6
[ 3.013624] ACPI: Thermal Zone [DM1Z] (0 C)
[ 3.013684] thermal LNXTHERM:07: registered as thermal_zone7
[ 3.013685] ACPI: Thermal Zone [DM2Z] (0 C)
[ 3.013706] GHES: HEST is not enabled!
[ 3.013781] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.034219] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.055810] 0000:00:16.3: ttyS4 at I/O 0x60b0 (irq = 19, base_baud = 115200) is a 16550A
[ 3.056055] Linux agpgart interface v0.103
[ 3.056183] tpm_tis 00:03: 1.2 TPM (device-id 0xB, rev-id 16)
[ 3.057331] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.057335] ACPI: Battery Slot [BAT0] (battery present)
[ 3.057372] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 3.057375] ACPI: Battery Slot [BAT1] (battery absent)
[ 3.352138] tpm_tis 00:03: TPM is disabled/deactivated (0x7)
[ 3.353165] brd: module loaded
[ 3.353594] loop: module loaded
[ 3.353831] libphy: Fixed MDIO Bus: probed
[ 3.353886] tun: Universal TUN/TAP device driver, 1.6
[ 3.353887] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 3.353914] PPP generic driver version 2.4.2
[ 3.353943] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.353946] ehci-pci: EHCI PCI platform driver
[ 3.354051] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.354055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.354066] ehci-pci 0000:00:1a.0: debug port 2
[ 3.357954] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.357966] ehci-pci 0000:00:1a.0: irq 16, io mem 0xcca3a000
[ 3.368127] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.368158] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.368159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.368161] usb usb1: Product: EHCI Host Controller
[ 3.368162] usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 3.368163] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.368233] hub 1-0:1.0: USB hub found
[ 3.368238] hub 1-0:1.0: 3 ports detected
[ 3.368420] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.368424] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.368434] ehci-pci 0000:00:1d.0: debug port 2
[ 3.372323] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.372334] ehci-pci 0000:00:1d.0: irq 17, io mem 0xcca39000
[ 3.384119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.384147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.384148] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.384149] usb usb2: Product: EHCI Host Controller
[ 3.384150] usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
[ 3.384151] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.384234] hub 2-0:1.0: USB hub found
[ 3.384238] hub 2-0:1.0: 3 ports detected
[ 3.384329] ehci-platform: EHCI generic platform driver
[ 3.384335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.384336] ohci-pci: OHCI PCI platform driver
[ 3.384342] ohci-platform: OHCI generic platform driver
[ 3.384346] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.384439] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.384443] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 3.384525] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 3.384540] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[ 3.384587] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.384589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.384590] usb usb3: Product: xHCI Host Controller
[ 3.384591] usb usb3: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.384592] usb usb3: SerialNumber: 0000:00:14.0
[ 3.384673] hub 3-0:1.0: USB hub found
[ 3.384690] hub 3-0:1.0: 15 ports detected
[ 3.385431] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.385434] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 3.385468] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.385470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.385471] usb usb4: Product: xHCI Host Controller
[ 3.385472] usb usb4: Manufacturer: Linux 3.13.0-32-generic xhci_hcd
[ 3.385473] usb usb4: SerialNumber: 0000:00:14.0
[ 3.385551] hub 4-0:1.0: USB hub found
[ 3.385562] hub 4-0:1.0: 6 ports detected
[ 3.392184] i8042: PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
[ 3.393372] i8042: Detected active multiplexing controller, rev 1.1
[ 3.394020] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.394023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.394040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.394051] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.394062] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.394254] mousedev: PS/2 mouse device common for all mice
[ 3.394420] rtc_cmos 00:08: RTC can wake from S4
[ 3.394538] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 3.394563] rtc_cmos 00:08: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.394608] device-mapper: uevent: version 1.0.3
[ 3.394668] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 3.394673] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.394743] TCP: cubic registered
[ 3.394800] NET: Registered protocol family 10
[ 3.394914] NET: Registered protocol family 17
[ 3.394922] Key type dns_resolver registered
[ 3.395160] Loading compiled-in X.509 certificates
[ 3.395793] Loaded X.509 cert 'Magrathea: Glacier signing key: 223a1a1af7ef14be22890f9d1cc63d083fee59bf'
[ 3.395800] registered taskstats version 1
[ 3.397885] Key type trusted registered
[ 3.399811] Key type encrypted registered
[ 3.401785] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.419579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.460151] tpm_tis 00:03: A TPM error (7) occurred attempting to read a pcr value
[ 3.460154] IMA: No TPM chip found, activating TPM-bypass!
[ 3.460705] regulator-dummy: disabling
[ 3.460903] Magic number: 11:175:852
[ 3.461055] rtc_cmos 00:08: setting system clock to 2015-04-17 20:49:48 UTC (1429303788)
[ 3.462218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.462219] EDD information not available.
[ 3.462247] PM: Hibernation image not present or could not be loaded.
[ 3.463163] Freeing unused kernel memory: 1356K (ffffffff81d1e000 - ffffffff81e71000)
[ 3.463165] Write protecting the kernel read-only data: 12288k
[ 3.464381] Freeing unused kernel memory: 580K (ffff88000176f000 - ffff880001800000)
[ 3.465532] Freeing unused kernel memory: 612K (ffff880001b67000 - ffff880001c00000)
[ 3.478948] udevd[143]: starting version 175
[ 3.509828] pps_core: LinuxPPS API ver. 1 registered
[ 3.509831] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 3.511322] PTP clock support registered
[ 3.511576] rtsx_pci 0000:5d:00.0: irq 42 for MSI/MSI-X
[ 3.511591] rtsx_pci 0000:5d:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 42
[ 3.513783] ahci 0000:00:1f.2: version 3.0
[ 3.513949] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 3.513977] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.514002] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
[ 3.514005] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst
[ 3.515548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 3.515549] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 3.528600] scsi0 : ahci
[ 3.528832] scsi1 : ahci
[ 3.528908] scsi2 : ahci
[ 3.528979] scsi3 : ahci
[ 3.529074] scsi4 : ahci
[ 3.529152] scsi5 : ahci
[ 3.529185] ata1: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38100 irq 43
[ 3.529186] ata2: DUMMY
[ 3.529189] ata3: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38200 irq 43
[ 3.529191] ata4: SATA max UDMA/133 abar m2048@0xcca38000 port 0xcca38280 irq 43
[ 3.529192] ata5: DUMMY
[ 3.529193] ata6: DUMMY
[ 3.529421] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 3.529440] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 3.580099] tsc: Refined TSC clocksource calibration: 2693.762 MHz
[ 3.596226] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.612542] usb 4-1: New USB device found, idVendor=0424, idProduct=5434
[ 3.612545] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3.612547] usb 4-1: Product: USB5534
[ 3.612548] usb 4-1: Manufacturer: SMSC
[ 3.612549] usb 4-1: SerialNumber: 1239567
[ 3.614189] hub 4-1:1.0: USB hub found
[ 3.614228] hub 4-1:1.0: 4 ports detected
[ 3.697128] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 3.697131] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:b9:01:fc:9d:75
[ 3.697132] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 3.697163] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 3.724083] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.848014] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.848677] ata1.00: ATA-9: SanDisk SD6SB1M-256G-1006, X231706, max UDMA/100
[ 3.848680] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.849416] ata1.00: configured for UDMA/100
[ 3.849580] scsi 0:0:0:0: Direct-Access ATA SanDisk SD6SB1M- X231 PQ: 0 ANSI: 5
[ 3.849710] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 3.849746] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.849748] sd 0:0:0:0: [sda] Write Protect is off
[ 3.849750] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.849764] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.850612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 3.851144] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.856328] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 3.856331] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.856471] hub 1-1:1.0: USB hub found
[ 3.856575] hub 1-1:1.0: 6 ports detected
[ 3.967974] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 4.100292] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 4.100295] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.100529] hub 2-1:1.0: USB hub found
[ 4.100626] hub 2-1:1.0: 8 ports detected
[ 4.167897] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.267892] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 4.284185] usb 3-1: New USB device found, idVendor=0424, idProduct=5434
[ 4.284188] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.284596] hub 3-1:1.0: USB hub found
[ 4.284626] hub 3-1:1.0: 4 ports detected
[ 4.451824] usb 3-5: new full-speed USB device number 3 using xhci_hcd
[ 4.469313] usb 3-5: New USB device found, idVendor=138a, idProduct=003f
[ 4.469316] usb 3-5: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 4.469318] usb 3-5: SerialNumber: 0030e4b96e96
[ 4.487780] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.530624] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 4.530627] EXT4-fs (sda5): write access will be enabled during recovery
[ 4.579770] Switched to clocksource tsc
[ 4.635700] usb 3-7: new high-speed USB device number 4 using xhci_hcd
[ 4.702947] EXT4-fs (sda5): orphan cleanup on readonly fs
[ 4.702996] EXT4-fs (sda5): 2 orphan inodes deleted
[ 4.702997] EXT4-fs (sda5): recovery complete
[ 4.706848] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.736086] usb 3-7: New USB device found, idVendor=05c8, idProduct=0369
[ 4.736089] usb 3-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.736090] usb 3-7: Product: HP HD Webcam
[ 4.736092] usb 3-7: Manufacturer: SunplusIT INC.
[ 4.777998] random: init urandom read with 97 bits of entropy available
[ 4.815946] init: ureadahead main process (382) terminated with status 5
[ 4.872399] Adding 8390772k swap on /dev/sda6. Priority:-1 extents:1 across:8390772k SSFS
[ 4.910276] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 4.910848] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.915232] udevd[465]: starting version 175
[ 4.919590] usb 3-11: new high-speed USB device number 5 using xhci_hcd
[ 4.937952] usb 3-11: New USB device found, idVendor=03f0, idProduct=521d
[ 4.937956] usb 3-11: New USB device strings: Mfr=5, Product=4, SerialNumber=0
[ 4.937959] usb 3-11: Product: HP hs3110 HSPA+ Mobile Broadband Device
[ 4.937961] usb 3-11: Manufacturer: Hewlett-Packard
[ 4.941014] lp: driver loaded but no devices found
[ 4.969070] Initializing HPQ6001 module
[ 4.969146] input: HP Wireless hotkeys as /devices/virtual/input/input8
[ 4.977289] wmi: Mapper loaded
[ 4.985916] [drm] Initialized drm 1.1.0 20060810
[ 4.991703] hp_accel: laptop model unknown, using default axes configuration
[ 4.998586] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 5.004770] parport_pc 00:0a: reported by Plug and Play ACPI
[ 5.004867] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
[ 5.013849] [drm] Memory usable by graphics device = 2048M
[ 5.013854] checking generic (a0000000 7f0000) vs hw (a0000000 10000000)
[ 5.013856] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 5.013874] Console: switching to colour dummy device 80x25
[ 5.030434] random: nonblocking pool is initialized
[ 5.031503] cfg80211: Calling CRDA to update world regulatory domain
[ 5.036770] ppdev: user-space parallel port driver
[ 5.039277] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 5.039280] Copyright(c) 2003-2013 Intel Corporation
[ 5.039419] iwlwifi 0000:5c:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.039474] iwlwifi 0000:5c:00.0: irq 46 for MSI/MSI-X
[ 5.045123] type=1400 audit(1429292990.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=725 comm="apparmor_parser"
[ 5.045130] type=1400 audit(1429292990.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[ 5.045135] type=1400 audit(1429292990.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 5.045666] type=1400 audit(1429292990.079:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=725 comm="apparmor_parser"
[ 5.045672] type=1400 audit(1429292990.079:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 5.045949] type=1400 audit(1429292990.079:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=725 comm="apparmor_parser"
[ 5.049977] Bluetooth: Core ver 2.17
[ 5.049990] NET: Registered protocol family 31
[ 5.049991] Bluetooth: HCI device and connection manager initialized
[ 5.049998] Bluetooth: HCI socket layer initialized
[ 5.050001] Bluetooth: L2CAP socket layer initialized
[ 5.050005] Bluetooth: SCO socket layer initialized
[ 5.051107] iwlwifi 0000:5c:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 5.057904] Bluetooth: RFCOMM TTY layer initialized
[ 5.057915] Bluetooth: RFCOMM socket layer initialized
[ 5.057920] Bluetooth: RFCOMM ver 1.11
[ 5.061071] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.061074] Bluetooth: BNEP filters: protocol multicast
[ 5.061082] Bluetooth: BNEP socket layer initialized
[ 5.063649] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 5.063657] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.063658] [drm] Driver supports precise vblank timestamp query.
[ 5.063906] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=nonewns=none
[ 5.073667] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 5.073671] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 5.073673] iwlwifi 0000:5c:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 5.073676] iwlwifi 0000:5c:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0
[ 5.073733] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
[ 5.099787] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 5.107517] usb 3-12: new full-speed USB device number 6 using xhci_hcd
[ 5.107863] lp0: using parport0 (interrupt-driven).
[ 5.117196] MXM: GUID detected in BIOS
[ 5.117211] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.127446] usb 3-12: New USB device found, idVendor=8087, idProduct=07da
[ 5.127450] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.136368] usbcore: registered new interface driver btusb
[ 5.139414] init: failsafe main process (863) killed by TERM signal
[ 5.153066] type=1400 audit(1429292990.187:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=953 comm="apparmor_parser"
[ 5.153074] type=1400 audit(1429292990.187:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
[ 5.153638] type=1400 audit(1429292990.187:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=953 comm="apparmor_parser"
[ 5.175774] ACPI Warning: \_SB_.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.215491] usb 3-1.2: new high-speed USB device number 7 using xhci_hcd
[ 5.231627] usb 3-1.2: New USB device found, idVendor=0424, idProduct=2512
[ 5.231630] usb 3-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.232078] hub 3-1.2:1.0: USB hub found
[ 5.232107] hub 3-1.2:1.0: 2 ports detected
[ 5.245239] Linux video capture interface: v2.00
[ 5.249575] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
[ 5.258139] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input12
[ 5.258213] usbcore: registered new interface driver uvcvideo
[ 5.258215] USB Video Class driver (1.1.1)
[ 5.267740] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.267757] input: HP WMI hotkeys as /devices/virtual/input/input11
[ 5.299688] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.342957] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 5.372070] lis3lv02d: 8 bits 3DC sensor found
[ 5.372127] ACPI Warning: \_SB_.PCI0.PEGP.DGFX._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 5.385320] fbcon: inteldrmfb (fb0) is primary device
[ 5.408760] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 5.416127] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
[ 5.416135] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGP.DGFX handle
[ 5.443465] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 5.443566] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.443818] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.444803] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
[ 5.451546] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
[ 5.507433] usb 3-1.2.1: new low-speed USB device number 8 using xhci_hcd
[ 5.530647] usb 3-1.2.1: New USB device found, idVendor=046d, idProduct=c045
[ 5.530649] usb 3-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.530650] usb 3-1.2.1: Product: USB-PS/2 Optical Mouse
[ 5.530651] usb 3-1.2.1: Manufacturer: Logitech
[ 5.530803] usb 3-1.2.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.603397] usb 3-1.2.2: new low-speed USB device number 9 using xhci_hcd
[ 5.642247] usb 3-1.2.2: New USB device found, idVendor=03f0, idProduct=034a
[ 5.642249] usb 3-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.642250] usb 3-1.2.2: Product: HP Elite USB Keyboard
[ 5.642251] usb 3-1.2.2: Manufacturer: Chicony
[ 5.642359] usb 3-1.2.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.642365] usb 3-1.2.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.650544] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.672470] usbcore: registered new interface driver usbhid
[ 5.672471] usbhid: USB HID core driver
[ 5.676000] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.1/3-1.2.1:1.0/input/input13
[ 5.676142] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2.1/input0
[ 5.676260] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.0/input/input14
[ 5.676361] hid-generic 0003:03F0:034A.0002: input,hidraw1: USB HID v1.10 Keyboard [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input0
[ 5.679926] input: Chicony HP Elite USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2.2/3-1.2.2:1.1/input/input15
[ 5.680033] hid-generic 0003:03F0:034A.0003: input,hidraw2: USB HID v1.10 Device [Chicony HP Elite USB Keyboard] on usb-0000:00:14.0-1.2.2/input1
[ 5.724422] iwlwifi 0000:5c:00.0: L1 Disabled; Enabling L0S
[ 5.731055] iwlwifi 0000:5c:00.0: Radio type=0x2-0x1-0x0
[ 5.819472] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5.819868] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6.122492] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input10
[ 6.743022] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input17
[ 6.791046] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 6.950914] Console: switching to colour frame buffer device 240x67
[ 6.954403] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.954405] i915 0000:00:02.0: registered panic notifier
[ 6.954426] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
[ 6.954972] ACPI: Video Device [DGFX] (multi-head: yes rom: yes post: no)
[ 6.955055] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input18
[ 6.959873] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.959978] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input19
[ 6.960085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.960160] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
[ 6.960166] ACPI: If an ACPI driver is@emeres: Sorry, yes, it's an HP 2013 UltraSlim Docking Station. I figured it was the only one compatible with the notebook model I provided.
Regarding any electrical circuitry or controls... well, sure, I'm assuming there's some circuitry in there
I'll give a whirl at using that two screen setup when I get a chance. I'm not inclined to think I need to hard-code it in a xorg conf file of some sort given that xrandr finds it just fine. I'm just perplexed by why it goes AWOL after one connect/disconnect. Now that you mention it, it could be the docking station internals, as I'm assuming most folks would be using this to plug in their computer, then completely remove it to go elsewhere, and then come back to their desk. Thus, they'd be physically disconnecting it vs. just toggling?
That said, I'm pretty sure I can use Windows Fn+F4 to toggle laptop vs. laptop + "projector" (what Win7 calls any external display) all day with no issues, so I'd think xrandr should be able to do the same?
Thanks for the input and links. -
Zbook 14 Extended battery fit with docking stations
I have a zbook 14 and extended battery CM03XL and also have the ultraslim docking station that you slide the connector that slides and locks into the notebook so the extended battery makes it impossible to use the docking station (the 3 cell battery lasts me 1.5 hours max w/ heavy use so I always need the battery slice with me and charged).
Is there an HP docking station I can use with this zbook 14 with the extended battery connected?Hello, @panoulix
To get your issue more exposure I would suggest posting it in the commercial forums since the HP ZBook 17 Mobile Workstation is a commercial product. You can do this at Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime:
HP ZBook 17 Mobile Workstation.
I hope this helps!
Thank you for posting on the HP Forums.
I worked on behalf of HP. -
USB ports on 8440p docking station hang.
I have a brand new 8440p in a new docking station. After a few minutes all the USB ports on the docking station go dead. After some power resets the ports come back to life but after a few more minutes the ports hang again. The USB ports on the laptop itself still work. The laptop is running Windows 7. I have replaced the docking station already. Any ideas?
It could be a faulty docking station (or a problem with the design of the device). Is the problem consistent with all usb 3 ports? Have you tried other usb3 peripherals?
I think you should contact the nearest Lenovo service representative if you're still under warranty, or try another docking station with your T530 and your WD, maybe at a Lenovo dealer.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
Q: DVI-D Dual Link docking station for Elitebook 8530w?
Are any of the following Dual Link DVI-D ?
Thanks in advance!
Adam
Models HP 2008 120W Docking Station
KP080AA#xxx
HP 2008 150W Docking Station
KQ751AA#xxx
HP 2008 150W Advanced Docking Station
KP081AA#xxx
HP 2008 180W Advanced Docking Station
KQ752AA#xxxNo problem. It is an older monitor. But being a small business, we can't afford to discard a working monitor that costs $1500 to replace.
The annoying part is that we tried to do a lot of research prior to purchase to find out exactly what resolutions the Lenovo docking solutions supported. We asked our rep to check because of the total lack of Lenovo documenation on this. We would not have wasted all this time trying to get it to work if we had known.
Even now, no one from Lenovo has come right out and stated that their docking stations don't support Dual Link. I think that they actually have no idea.
We've been bounced around and around between the same Lenovo sales, support and customer service numbers so many times in the past three days that they are now just dropping our calls in the hope that we will go away. No one at Lenovo has offered a solution of any kind.
FYI, we've even been told that because we ordered the W540 through CDW that there is 'nothing Lenovo can do.' -
Strange dual screen issue with HP Folio 1040 and docking station
Hi there,
I have a laptop in a docking station. Two displays are connected using the docking station's DisplayPorts. Instead of showing me two separate displays like I'd have expected, xrandr seems to "see" only one large screen.
Laptop: HP EliteBook Folio 1040 with Intel HD 4400 graphics card
Docking station: HP 2013 UltraSlim Docking Station
$ xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
eDP1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
1920x1080 60.05*+ 40.03
1400x1050 59.98
1280x1024 60.02
1280x960 60.00
1024x768 60.00
800x600 60.32 56.25
640x480 59.94
DP1 disconnected (normal left inverted right x axis y axis)
HDMI1 disconnected (normal left inverted right x axis y axis)
DP2 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.00*+ 59.94
3840x1080 60.00
2560x1024 60.00
1680x1050 59.95
1280x1024 60.02
1280x960 60.00
1280x720 59.97
1024x768 60.00
800x600 60.32
640x480 60.00 59.94
720x400 70.08
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
eDP1 is the laptop's built-in display, while DP2 seems to represent _both_ displays. When I select 1920x1080, the two displays show the same. When I select 3840x1080, however, the two displays show a side-by-side setup, such that X11 spans over both of them. While I'm happy that I'm now able to make use of the second display, this obviously breaks some software stuff, like fullscreen video in vlc, for example. Any suggestions what I can do about that? Is it possible to software-split the screen such that it looks like a normal dual-head setup again?
Additional info:
$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
$ X -version
X.Org X Server 1.15.1
Release Date: 2014-04-13
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.14.0-4-ARCH x86_64
Current Operating System: Linux elite 3.14.6-1-ARCH #1 SMP PREEMPT Sun Jun 8 10:08:38 CEST 2014 x86_64
Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=88c068f1-bc0b-45b0-8836-182c29fe9b41 rw quiet
Build Date: 14 April 2014 08:39:09AM
Current version of pixman: 0.32.4
$ pacman -Qi intel-dri xf86-video-intel | grep Version
Version : 10.2.1-1
Version : 2.99.911-2You could define two screens in xorg.conf similar to last post here. You would have to select the screen using the -display switch or the DISPLAY variable when using xrandr.
-
Random pause with docking station
I regularly use my 3g 20bg iPod with my docking station and line out to a stereo receiver. I recently replaced my original docking station with a universal docking station and have started experiencing random pauses during playback. It starts after playing for about 30 minutes or so and usually occures 3 or 4 times. Then, it is fine for for as long as I use it. If I stop playing it for several minutes and then start again, I get the same pasuing again. I am using the latest version of the software(v2.3) and have reset it and restored it multiple times over the past few weeks.
Is there a reason you can't go back to the original docking station? The problem is obviously with your new universal docking station. You might want to try and return it as defective.
I'm not sure what you can do to troubleshoot the problem within the docking station.
Doc -
can't get the 2013 ultraslim docking station USB ports to work with my elitebook 1040
Docks are usually pretty robust but they do need good reliable power. I would not chuck it until I tried a new power supply. The fact that the power supply does not reliably power the laptop tells me the power supply is bad. The dock might also be bad but both going bad at the same time is far less likely.
-
USB 3 on Thinkpad docking station
I have a WD My Passport USB3 disk disk that runs fine directly on my T530 USB3 port. But if I connect it to my docking stations USB3 port it connects and disconnects all the time. is the a fix for this?
It could be a faulty docking station (or a problem with the design of the device). Is the problem consistent with all usb 3 ports? Have you tried other usb3 peripherals?
I think you should contact the nearest Lenovo service representative if you're still under warranty, or try another docking station with your T530 and your WD, maybe at a Lenovo dealer.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it. -
Problem with starting Windows when W510 in docking station
When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.
-
Problem with laptop and docking station
Hello.
We have two laptops with two docking station. Both laptops w/ docking have the same problem:
When the computer is turned off, and its still connected to the docking station, the fan in the computer start to run really fast. The fan goes on for a good while. This is making alot of noise, which can be annoying for the person using the office. When the computer is on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?
1. Product Name and Number
HP ProBook 6460b
Docking Station VB043AA
2. Operating System installed
Windows XP 32-bit
3. Error message
No error message.
4. Any changes made to your system before the issue occurred
No recent changes.
Thanks in advance.
- Betroger
This question was solved.
View Solution.It is possible the notebook is not completing the shutdown in full when docked.
Make sure the BIOS is the most recent version.
Here is the most recent one to try should you need it.
Other than that, I am afraid I do not have much else for this. I did some research, but I didn't really find anything that was exactly like this. I found scenarios where the fan would run at full speed when docked, but this happened whether the notebook was booted or not. You can try your luck in the business support forums to see if they may have something that is a little more helpful.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
Hi all.
Having this weird issue with one of our worker's T42. Whenever she connects her T42 to a docking station and closes the lid of the laptop, mouse starts moving around, no emails can be selected in outlook, no option to restart the computer (start->shutdown brings up the dialog window, but can't choose anything from there.)
She has tried another dock, but no difference, same problems.
Do you have any ideas?
Thanks in advance
Solved!
Go to Solution.Lullaby, welcome to the forum,
Some suggestions to try;
1) replace the dome TrackPoint cap with the Traditional "hairy" one, it has a lower profile.
2) remove the Trackpoint cap all together
3) ensure that the keyboard is seated properly, removal and installation instructions can be found here (You could maybe also try bending the keyboard a bit if you remove it)
4) disable the Trackpoint using the UltraNav utility or in BIOS
As you can probably guess, I believe your problem maybe that the Trackpoint is in contact with the screen when closed.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Maybe you are looking for
-
Special characters in iWeb sites
Hello I understand that it is not advisable to use special characters in the name of an iWeb website, but what about when inserting text into the site? For example would it be ok to write é as in café as part of the heading in a Home page ?
-
Hello. We have a CUCM 9.1.2.11900-12. When we make an external call, receiver can't see our number (it appears as unknown). I've tried to add the number into "External Phone Number Mask" field (into "Line Configuration" from device), with no luck. I'
-
Is Metro-ethernet Secured ? Compare with FR/ATM
Hi, Just would like to understand if Metro-ethernet has the same security level as FR and ATM ? Metro-ethernet has broadcast nature and it seems mirroring ethernet frame is much more easier than FR and ATM . Is there any study onto the security issue
-
Sync halfway , itunes say my ipod is not connected
i was syncing photos into my ipod , then when the sync was going to be complete , itunes pop up and say that my ipod is not connect ..
-
HT1766 my iphone just went black and won't turn on what can I do?
Help! My iphone 3gs was working just fine. My granddaughter picked it up and jerked it out of the charger and it went black. I have tried pushing the home & power button together, going to itunes to restore and nothing helps. Can anyone help me with