ZBook 17 plays back no sound in Blackmagic Resolve

I have been battling with this problem for a while and the guys from Blackmagic Design gave up (after making sure all my settings in Resolve are ok and the software version supports system audio).
I colour grade with daVinci Resolve 11 (Lite) on the ZBook 17 using the system speakers. Only in Resolve the audio does not play back (other programmes are not affected). The VU meter moves so the audio is recognised, it is just not audible.
Is it possible that the IDT High Definition Audio codec is incompatible with Resolve? I have the latest driver installed. I have also the NVIDIA High Def Audio controller active but since I use no I/O devices I assume this is irrelevant. But to be sure I deactivated the codec and controller alternatively without result.
Is anyone familiar with this problem in Resolve?

This is NOT official HP Customer Support
I, as most other persons on this forum, do not work for HP.
This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity.
Any reply from a HP employee represents their own opinion and not that of HP's.
HP ZBook 17 Mobile Workstation is business class computer, your question may be better answered in the HP Enterprise Business Community. You may also consider contacting the HP Business Support Center to request assistance with your question.
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

  • Facebook videos play back without sound

    When I click on a video within Facebook, the video plays back without audio.
    I have a 16gb iPad with retina display. 
    This happens on all videos within
    Facebook and continues despite several updates to Facebook.
    I am running iOS 7.0.4
    Help please

    Hello acarrejo,
    It sounds like the Facebook app on your iPad is not playing audio.  I recommend following the steps in the article below for an issue like this (you can skip step 3 since it is not related to this issue):
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • N95-3 pc suite media play back video/sound/off bal...

    why when i make a video and up transfer it to my computer i go to the "view media" in pc suite and the video plays much slower then the sound of the video...do i have to convert the file or something..cuz i want to enjoy my videos but i cant because the sound doesnt match up with the video!....any help out there?..thanks

    Here I go again Replying to myself.
    I have just tried both Suites plus the OVI Player on a 32 bit machine running XP SP3 WMCE 2005. Guess what. The same problems with playing MP 4 Video files. This time some will play in wmp and wmc but the vast majority will not.
     I cannot understand why a program meant for just playing Music can mess up the playing of Video files. Of course OVI Suite does not deal with Video transfer yet.
      I am sorry to say this but IMHO this software is not fit for purpose. I have just recommended 3 friends not to buy Nokia Phones because they will not be able to use them with their computers.
     Samsung PC studio does work with my system and I now regret replacing my Samsung Phone with this Nokia one. I will be calling at the O2 shop to ask why they said that the Nokia Software will work fine with Windows Vista Home Premium SP2 64 bit version when it obviously does not.
     One very upset customer.
      Do Nokia staff actually read or contribute to these forums????
     On all the other forums I contribute to it is policy to welcome a New Member by replying to their first post. even if they have not got a solution to the problem posted. I feel this is just being polite and considerate.
     Not on here obviously.
    Kind Regards James.
    Kind Regards James

  • Music noisy on play back.  sounds like static

    after i've had the macbook pro (10.7.1 bld 11b26) when i play music thru the builtin speakers is i get a clicking and poping sound.  i'm using the macbookk with an external display w/o speakers.  itunes version 10.4.1 (10).

    This is correct and it's got to be the stupidest tiny icon anyone could sabotage a nice podcast with - but thanks for nothing (i.e. useless crud).  But at least iPhone folks help one another out.  Thanks,

  • No sound when playing back videos, 10 out 14 taken all on the same day!!

    Ok strange 1, took videos this morning using my iPhone 4, when played back the sound was fine could hear everything, i took 10 more, i could hear no sound from these 10, i took 2 more when i got home they were fine, the phone was held in different ways all day so i wasnt covering anything, obviously some worked before and after so there isnt a problem with the microphone. tried restoring but I dont see the point if some have sound and some dont, have uplaoded to youtube and played back on the computer with the same problems, anyone any ideas?

    You could try either a Backup Restore or a Clean Restore. I usually do a CR with MobileMe as the restore source. Afterwards I reload the music, videos and apps.
    It could be a sound playing bug like the Bluetooth bug that bites me now and then (audio stops and goes once in a while, audio gaps in the video if the video is paused, and videos recorded have the audio very quiet).

  • I can't get voiceover to play back on iMovie. What's going on?

    I can't get voiceover to play back on iMovie. It seems to be recording just fine, but when I click to play back, no sound. I'm using the internal mic. Anybody have any idea what's going on?

    Version of iMovie device your using it on (iPhone or iPad?)

  • As im recording videos on Photo Booth, my movements seem late. then when i play back the video, the sound comes in really late. how do i fix this?

    theres like a 5 second delay from when i say something to when the sound of my voice actually comes in when i play back movies in photobooth.i tried restarting my computer and even turning on *auto flip new items. when i turn that on the problem is fixed for only one video. when i try to record the next one its back to the delay. is there anyway to trouble shoot this? or do i have to take my mac to the apple store. to top it all off ive only had my computer for 5 days. help please !!!!

    I had the same problem since my moutain lion update, too.
    I fixed it in the following way.
    -Search for utilities on the HELP option on the top taskbar
    - Go to utilities and open your audio-midi-setup.
    - check your input and output properties
    - Change input and output 44100khz and 16-BIT for both.(these are the most common properties)
    my sound and video are not ouf sync in photo booth anymore.
    let me know if it works for you!
    cheers

  • I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2)

    I spilled some pop on the back of my iPad. I cleaned it off and everything seems to be going good but when I play music it will either play with no sound or play then continue with no sound. What can I do to fix this (without being costly, it's a iPad 2) this happens with other music apps too. Please I need help!

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists. If it doesn't work, there isn;t much anyone here can do for you. It may be a physical problem with your speakers.

  • I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

    The "restore disk" is built into the Mac. See About Recovery.
    Need more specifics about what error messages you got while installing Adobe Flash.
    However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
    Click the Try something new! link at the bottom of the YouTube page.
    I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

  • Can't get sound to play back on Movie Maker when recording with internal webcam/microphone

    I have a Windows 8, 64-bit  Envy notebook.   I tried using Google Hangouts but there wasn't any sound (the camera was fine).   
    Later, I decided to test the  internal microphone myself by  creating a Movie Maker file,  and clicking on Webcam and making a recording.  The camera worked but it played back in total silence. 
    I checked the settings for the microphone and the internal mic was properly set as the default.  I turned up the volume to the maximum.   Then I found directions for doing a sound check, and I was able to do the Sound Recording check and get audio when I played the file back.   
    But when I tried again to make a video,  i got zero in the playback. 
    Any idea what's going wrong? 
    Thanks,
    Pat

    Hello Myerspat,
    Welcome to the HP Forums, I hope you enjoy your experience! 
    I have read your post on how you are not able to get sound from your notebook computer, and I would be happy to assist you in this matter!
    To restore the audio to your notebook, I recommend following this document on No Sound from Speakers (Windows 8). This should help with the playback on your system.
    In addition, you can also follow @SuperMario1's thread on Troubleshooting Guide: Audio does not Work after a Certain Period of Time. This guide should help with your notebook's audio output in regards to a recent Windows Update.
    For more assistance, I will need to know:
    The Product and Model Number of your notebook computer.
    If your computer has completed all of its important Windows Updates.
    If you have updated your HP drivers using the HP Support Assistant.
    If this is an on-going, or recent issue.
    Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
    Regards   
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    The description says it all.    I bought a movie on iTunes but when I try to watch it plays back slowly with no sound.  Then the video will speed up and the sound will work for a moment then off again and back to slow motion.  I have a dell laptop running windows 7

    Hi Normanwh,
    If you are having video playback issues in iTunes on your Windows machine, you may find the following article helpful:
    Apple Support: Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
    http://support.apple.com/kb/ts1718
    Regards,
    - Brenden

  • Sound problem during play-back

    Dear friends
    After recording images with my MSI TV-Tuner card, i cant get any sound during play back. First i had Win-Amp installed on my system that i thought may be it is the cause of the problem. After uninstalling the win amp, again the problem existed. Even i have installed the Beta version driver of my MSI tv tuner but i hadn't any success in solving the problem .
    If somone can help me to solve this i will be appreciated.

    make sure you have the recording input set correctly in your settings (look under Device options)
    however your tv tuner is connected to your soundcard (eg Line-IN) then this should be set accordingly

  • AC3 sounds garbled when played back through the asset window

    i have a 5.1 AC3 file i made with A.Pack with DVDSP3 (now using DVDSP4) and when i played the file back in my asset window via S/PDIF out on the Mac to a Dolby Digital Capable 5.1 amp (having the prefs in DVDSP set to SPDIF not default in the simulation pref window)...it sounds REALLY garbled.....i know what a raw AC3 file sounds like played back throught a standard amp (like a code-not being able to hear anything BUT that)...and the file i tried to play back was still barely understandable...but sounded like a robot. is this a bug or am i doing something wrong?

    Awesome! This fix worked for me as well. I too don't know what happened after my system had been working just fine for years, then today it was all garbled. All is well now. Thanks!

  • Iphone 4S video play back has no sound

    when i play back the video it jus makes a hissing sound, but playing music is fine through the phone. Any 1 else this problem ?

    Try doing a restore. If that doesn't do it I would recommend taking it to the apple store or contacting apple. The phone might need to be replaced.

  • Sounds with fades not playing back consistently

    Have other people encountered this, and maybe found a fix or workaround? The new fade tool seems to be extremely buggy. Sound chunks with fades on them only seem to play back fades some of the time. Very often the part with the fade doesn't play back at all, with the sound starting abruptly at the end of the fade. This happens even on the simplest sessions, and seems to happen often on bounce/export, even if the sound usually plays back fine in the session.
    This is a huge problem, it makes the new fade tool pretty much completely unusable.
    Power Mac G5 quad 2.5 and Mini duo 1.66   Mac OS X (10.4.7)  

    Thanks for responding. Sorry I had forgoten the link.
    http://briancschneider.com/zip/web
    I'm not using edgecommons. I'm using buzz! for the sounds.
    Checking other threads on sound was very helpful in getting the sound set-up. I've been unable to find a thread about sounds not playing after upload except certain formats not playing in some browser. That shouldn't be my issue since I have the sounds in multiple formats, but I'm obviously overlooking something so...

Maybe you are looking for

  • Using a PL/SQL function in SQL

    Hello I wrote a function in pl/sql that create a table and return the name of the table as varchar2. The function is AUTONOMOUS TRANSACTION. I want to write a SQL that in the �FROM� section will call the function. The SQL will take the name of the ta

  • Error While setting up Gmail Via Microsoft Exchange

    Hi everybody, I'm Using an Iphone 3gs in iOS 6. I Wanted to setup Gmail with Push, so i set up the account via Microsoft exchange. But after the setup is complete, I cant access the mails. Whenever i open the Mail app, its showing "Cannot get Mail: C

  • Sql execute about 1s,but report run time 20s

    I execute the sql which is copied from webi query in database, it take less than 1s. There are 6 queries in report, so I assume the time used to retrieve data from DB is 6s. and the report responding time is about 20s(from the moment I click "refresh

  • How to release project for CHARM?

    Hi Experts, I am very new to solman and stuff. I am configuring the CHARM process for first time. So far, I have got the TMS and other domain controller related activities done from Basis. In addtion, I have also maintained systems in the transaction

  • Error ora-604 ora-904 invalid column name

    Someone knows how to fix this problem? Error ora-604 ora-904 invalid column name.