Zbot and other issues after sophos scan

bot-gal.ide zbot-gap.ide zbot-gay.ide zbot-gbf.ide
zbot-gbi.ide zbot-gbj.ide zbot-gbm.ide zbot-gbn.ide zbot-gbq.ide zbot-gby.ide zbot-gcb.ide zbot-gch.ide zbot-gcl.ide
zbot-gcm.ide zegos-cc.ide zeleff-a.ide
Scan name: "Scan Local Drives"
Scan items:
Configuration:
Scan inside archives and compressed files: Yes
Automatically clean up threats: No
Action on infected files: Report only
Live Protection enabled: Yes
Scan started at 2013-08-29 13:57:24 +0200
New volume detected at /
2013-08-29 14:11:06 +0200 Encrypted file: /Users/Downloads/AdobeFlashPlayerInstaller_11_ltrosxd_aaa_aih-1.dmg
2013-08-29 14:11:06 +0200 Encrypted file: /Users/Downloads/AdobeFlashPlayerInstaller_11_ltrosxd_aaa_aih-2.dmg
2013-08-29 14:11:06 +0200 Encrypted file: /Users/Downloads/AdobeFlashPlayerInstaller_11_ltrosxd_aaa_aih.dmg
Scan completed at 2013-08-29 14:13:08 +0200.
308531 items scanned, 0 threats detected, 3 issues

I don't know how you got rid of Sophos, but here are directions to make sure you got all related files.
Sophos Uninstaller

Similar Messages

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

Trouble with 4G and other issues after latest update.

To whom it may concern,
After the recent update I have been having the following problems:
I lose 4G in many places where I was receiving great 4G access before.
Battery life seems to have suffered a little, this may be due to 4G hunting.
New software applications were installed like the Caller ID app, and flipboard. I hate when software is installed without my authorization and then cannot be removed. What year do we live in Verizon?
I have heard on this and other forums that a factory reset does not resolve these issues but Verizon claims that it is the final resolution. We should not have to do a factory reset after an update. I understand that there are many variables to consider with all the apps out there but that is what testing is for. That is why we wait for updates from Verizon.
I will attempt a factory reset to resolve my issues. If this does not resolve the issues I will be contacting Verizon about a refund for the 4G access that I am now being denied.
Thanks
AlphaDanger

Hey AlphaDanger!
The year is 2013 and I read you loud and clear on wanting to make sure your software operates smoothly on your GS3. So, let's make that happen.
Right off the bat, thank you for the details as well as considering a hard reset. But, I'd like to make another recommendation if you have yet to do it. Instead, I'd suggest wiping the cache partition. To do this:
1.) Power off your phone.
2.) Simultaneously hold the volume up key, home key, and power key.
3.) When it vibrates, release only the power key.
4.) When you see the Android recovery menu, wipe cache partition using the volume down toggle and power key to select.
5.) Then select "Reboot System Now".
Please let us know how this goes.
EvanO_VZW
Follow us on Twitter @VZWSupport

Menu Bar Icons Disappeared and other issues after Security Update 2006-001

Hi,
I was really affraid when i've heard about the Safari vulnerability, so I was really happy to see the Security Update 2006-001.
But after installing it, I'm having regrets:
* mouse speed turned to default settings
* system preferences crashes when i try to access to Mouse & Keyboard
* all the menu bar icons disappeared: Bluetooth, Airport, Time, EVEN Spotlight
* Finder is slower...
I've repaired disk permissions but: nothing happens....
What should I do please?
Should I wait?

How did you fix it? I'm having the same problem
myself.
Mandy,
I'm gonna tell you a secret, just like i said my problem wasn't due to the Security Update but because of Front Row.
How? Because, I've hacked my iMac (without iSight) to install FrontRow (with an update), and i've installed the Security Update at the same time. Restarted my computer, and thought the problem was due to the Security Update.
If you did the same thing, here's the trick to remove Front Row:
Delete Front Row (/System/Library/CoreServices/Front Row.app)
Install/reinstall the the latest Mac OS X Update Combo.
This article assumes you haven’t tried installing Front Row before without the use of Enabler. If you have used one of the very early versions of Front Row (ones installed without Enabler):
Delete Front Row (/System/Library/CoreServices/Front Row.app)
Delete the preference file (/System/Library/LaunchAgents/com.apple.frontrow.plist)
Remove any Login Items that launch Front Row (System Preferences >Accounts >User >Login Items)
Disable any shortcuts managed by third-party applications that launched Front Row.
Reboot and reinstall.

Failed Hardware Scan and other issues E440

Hi all,
This is probably more rant than anything, but I wanted to give a heads up to others too.
I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
I also found two pictures of the repair person in the recycle bin...
So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
So, he sent me ANOTHER BOX. I've built up quite a stack of them.
Our power was out AGAIN from the 17th through the 19th (don't get me started).
I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact. I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
Part Description                                           Symptom
IMAGE                                                             Replaced due to engineering change
System board                                                 Network card error
Hard disk drive                                                Network card error
ECA-WIRELESS                                            <no symptom listed>
There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
When I booted it up, the first thing I noticed, in the lower right corner was:
Windows 8.1
SecureBoot isn’t configured correctly
Build 9600
I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
Your PC ran into a problem and needs to restart. We're just
collecting some error info, and then we'll restart for you. (xx% complete)
If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
By 3pm yesterday there were 34 system events in the configuration history.
I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
Log Information,
Canceled 04/24/2015 n:nn pm
You have not done a hardware test on your computer
And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
At some point, the error about SecureBoot went away.
Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
After these updates, I flashed the new BIOS.
Then, I ran hardware scan again...
Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
There are 867 events in the event viewer - Critical, Error, and Warning...
Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
The rest are from when Lenovo had it and yesterday and today.
64 of them are the disk error.
341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
3 times it's rebooted without cleanly shutting down
60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
16 are warnings that various processors in Group 0 are being limited by system firmware.
12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
16 are application errors
One is for the computer rebooting from a "bug check"
15 are for name resolutions timing out after none of the configured DNS servers responded.
10 are for SecureBoot being disabled.
14 for services terminating unexpectedly
15 are for WLAN Extensibility Module has stopped
61 are for applications not being able to be restarted because the application SID does not match Conductor SID
12 are for activation of CLSID timing out waiting for the service wuauserv to stop
So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
I'll keep you updated!

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Scan app not opening and other issues

Hi,
Let me start by saying thank you for your assistance. I have a regular-old 5514 photosmart airprint printer, and it is going crazy. It is just about to be two years old. My computer is a MacBook Pro on 10.9.1 (also two years old). The printer and computer are connected by my Comcast blast wifi. All of my paper and ink are HP. So here's the problem, first it won't print my pictures, not on glossy or regular-it just makes the noise like it is printing but the pages are blank (this never used to be a issue); second, the scan app won't even open on my computer, it just gives me a long page of coded errors or just automatically closes; finally, it often is printing streaky if it does print. There are no updates that I can find on for the app on my computer, and I have zone 2 ink, (I will buy more if this thing starts working), and I have run all the tests and they are completely fine as if nothing is wrong. Please help! If you need additional details I can provide that info.
Thanks,
amycdero

Hi amycdero and welcome to the HP Forum,
I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
I hope this information is helpful. Please let me know.
Thank you,
I worked on behalf of HP.

Application is throwing NSAPI and other errors after the migration

We started seeing NSAPI and other errors after the migration of new codes and recently make some changes
1) During the migration, all the 4 WLS cluster instances were bounced simultaneously. What is the best practice and recommendation from BEA Oracle? Do we need to bounce it one by one for any specific reason?
2) we recently introduced the 4th weblogic cluster instance on Solaris 10 zone. All other WLS instances are running on Solaris 8.
Is it okay to have two different OS versions( Solaris 8 and Solaris 10) and different hardware to host WLS cluster instances? Does BEA Oracle support this kind of configuration?
3) We are consistently seeing below errors in the iplanet web server error logs even though site is working fine
[11/Sep/2009:08:53:50] failure ( 4453): for host XX.XX.XX.XX trying to POST /servlet/FSO, wl-proxy reports: exception occurred for backend host 'YY.YY.YY.YY/23120/0': 'CONNECTION_REFUSED [os error=0, line 1732 of URL.cpp]: Error connecting to host YY.YY.YY.YY.YY:23120'
Do we need to upgrade our WLS proxy plugin? . Current version of WLS proxy plug-in is libproxy_61.so. Our Weblogic version is WLS 92 MP2
I'll really appreciate if some can anwsers those questions

OK booted in to Virtualbox, seems too be working fine this way, maybe it is the ATi drivers
any Help would be appreciated

How to start CRS and other services after rebooting nodes.

Hi,
i have created two node cluster database.how to start CRS and other service after rebooting nodes?
Thanks,

use crsctl command start...
$ORA_CRS_HOME/bin/crsctl start crsOr check status about CLusterware...
$ORA_CRS_HOME/bin/crsctl check crs
CSS appears healthy
CRS appears healthy
EVM appears healthyIf not OK... check log at $ORA_CRS_HOME/log/hostname/*
and check status database , service and etc...
use crs_stat
$ORA_CRS_HOME/bin/crs_stat -t
$ORA_CRS_HOME/bin/crs_stat if you find some service or instance ... not online...
use srvctl command, help to start
Get Help...
$ORA_CRS_HOME/bin/srvctl -h

HP Spectre x360 13-4002dx active pen and other issues

Hi, I'm havng issues with my active pen, but wasn't sure if it's an issue with my laptop or stylus (or if it's a software/driver issue). Is there an easy way to tell?Also, I've been using my laptop for a month now, and recently have had other issues, listed below. I wrote them down below in case that could provide some information, and/or if those issues are something I should be concerned about and should try to fix. To begin with, after doing some research, I bought a Synaptic active stylus (the Dell one), which worked very well for the first two weeks until last week. All of a sudden, it started to respond very awkward and randomly, sometimes it's too sensitive and draw lines even when the pen was off the screen, and sometimes it didn't draw anything at all even though I see the small circle following my pen tip. I initially thought it was due to low battery, but it's the same issue after I replaced the battery. Right now, the laptop doesn't respond to pen touching the screen (no clicks, no writings), although the pointer follows the pen. Any ideas on how to resolve this issue? How do I know if it's the pen that is faulty or if it's the laptop? Other issues I had or am having:1. Today, I had a BAD_POOL_HEADER error and blue screen of death. After reboot, everything seems to still work, but the login is now much slower. It's very fast to reach to the login screen, but it takes 2-3 minutes to bring up the desktop and other startup applications after I enter my password (I think it used to take less than 10 seconds). I tried rebooting 2-3 times, and it was always the same. 2. The laptop seems to gain heat very easily. With moderate workload (example, some websites with flash advertisements or videos), it can easily go above 70 degrees Celsius on either core (according to CPUID HWMonitor). One time, the system actually failed and forced hibernated due to overheating. (To me, the screen went blank all of a sudden. I turn the laptop back on, and the screen printed a message for a while saying it forced shutdown due to overheating. I realized it was hibernation after I logged in since I see all my windows) 3. On the second day of use of this laptop, the laptop just shutdown for no good reason, and then couldn't boot, saying it cannot find boot image or something like that. I looked up the web and found that it could be a BIOS issue. It said to try reseting the BIOS setting, and then it worked. I also upgraded the BIOS image to the latest after this incident. 4. This is probably more a router issue, but I initially had problems connecting wireless to my router. It was solved after changing my router. For those who are interested, the details is as the following: my old router supported up to 802.11n , but not 802.11ac, That shouldn't matter, but all wireless connections get disconnected once in every several hours if my HP Spectre x360 is trying to use the wireless. However the wired connections stayed ok when this happens, so the router is only "partially" killed. The fact that all wireless connections are getting killed seemed to me that the router didn't like something from my HP laptop. To be fair, I didn't try not using my HP laptop to see if the issue goes away, so it could be a coincidence that the router started to go faulty at the same time I bought and used my HP laptop. Anyways, it seemed it's a router issue, so after replacing the router. the issue went away. Thanks.

Will investigate and let you know what I can find out.
Although I am an HP employee, I am speaking for myself and not for HP.
Please click the little thumbs-up dealybopper to the lower right if my reply was helpful to you. Please mark Accept As Solution if it solves your problem. This will help others, too!

C309g (CD055A) no black and other issues..

Hey all.. Not sure which thing to post about first, so in random order, here goes....
I bought a used printer listed above in the subject.. It needed a new power supply, and ink, but seemed to be great. I purchased the regular size cartridges except the black which they had in XL size. I printed a total of 3 test pages (set up on three computers), I printed one 8x11 photo via bluetooth from my phone, and my wife printed 2 8x11 photo's from her PC. All 3 8x11's were on regular paper. Oh, and we printed one of the dots built-in pages.. So if you're counting (and I KNOW I am), that is a total of 7 pages. Additionally there may have been one demo page (possibly a total of 8 pages, then!), can't remember if I did that demo page on the previous owners ink or if I did one on the new ink I bought (previous ink was old/empty). Oh, and technically there was an alignment page, so final total 9 pages. After those nine pages, my magenta and yellow ink were both down to around 65-75 percent. It sat a week without use (literally, 7 days). Today I went to print some regular text (black only) and it shot out at me blank pages. I tried a few more times, and nothing but blank pages. Tired of running back and forth, I printed a built-in "school paper" page or wide ruled paper (heh, how cool in a pinch is THAT feature!). It printed perfectly - Course it's blue and magenta, no black..
So it's been awhile since I used inkjet, but I quickly rememberd the handy utility to clear/clean printheads. Ran that. It failed, assumedly for missing black (it had the gray'ish photo black, but not 'black' anywhere on the sheet. After the cleaning failed, I removed the black, and all the colors. Seems to be black in there (as should be!) I dabbed the bottom with a paper towel gently, it turned black... So I put it in, and it whirred away doing it's thing to re-align, and then it told me the shocking news that my printer was low on ink, and showed all levels to be well, I suppose about 10-15 percent remaining (think SMALL skinny lines). Now I know this is an estimate, but I'm concerned from the get-go that after only 9 pages it was down to 65%!!
Before I found the forums, I found a site that recommended removing the ink cartridges, and removing the print head itself and soaking the bottom portion (up to the wire meshes, slightly covering them, but not the entire thing) for awhile in IPA (isopropal alcohol) and then dipping them in fresh a fresh batch to 'rinse' then gently hitting them with compressed air via air compressor (or canned air, I suppose, have an air compressor) to remove any debris and get the remaining alcohol off/out. I then let it sit several hours to 'dry', which - it was probably ready immediately given the properties of IPA, but didn't want to chance it.. Re-inserted it and the ink, and..... SAME THING.
All the ink is official HP ink (since I'm sure that q is coming), was purchased from a big box retailer who ya all know and love or hate (no need to name drop).. I'm wondering if...
1. My ink, though coming out onto the paper towels could be bad/defective. Given the really fast drop in the levels of ink, and the issue with black not seeming to print, seems possible?
2. Should I try the boiling the print head - err not boiling it, but sticking it in recentyl boiled water, and give that a try? The guide that was posted here somewhere showed doing that, with IPA added to the water as an option. Is it possible the IPA didn't break up whatever gunk might be blocking the black, that boiled water might break up? Does that make sense, or would the IPA have broken it down?
How do these print heads work exactly, or is that the big company secret? I mean, is there a tube that goes for the inlet of black to the gold area underneath, cuz it's not directly under the gold like old fashioned cartridges used to be.. Is there any way to open up or access that area like, under the metal screens to get in there with a pipecleaner or something maybe, or something?
And, for bonus points (lol) Why does HP assign two names to their printers?? IE C309g (CD055A), If my printer is the C309g, why is it ALSO the CD055A?? SO confusing and un-necessary..
Thanks for your time and patience

I've had a similar problem with black not printing, though my printer is a B8550. I bought new and have used it fairly lightly I'd say, but after only a couple of years it suddenly stopped printing the photo black (it has separate cartridges for black for photos and black for text, etc.).
It prints on regular printer paper just fine using the other black--but not a drop prints of the Photo Black (yes, it's full). Since I've cleaned the print head, and even bought a new one, and a diagnostic print shows absolutely no trace of the photo black, I'm fairly sure the printer itself is at fault. It's sold as a 'Photosmart' printer, meaning it's intended to use to print photos--large format too--so without photo black it is a huge brick as far as I'm concerned.
I've begun to notice from these forum posts that there is an issue with HP and black ink, or at least whatever controls black for photo papers in their inkjet printers. If I'm not mistaken both yours and mine use the 564 cartridges, so maybe that suggests a common factor in such printers that is the culprit. I suspect HP knows there is a problem, either with the hardware or firmware, and I wish they would do right by us.

RV042G Log Email and other issues

The RV042G manual said to use this site for support so here goes. After owning and operating the RV082 for many years, I recently upgraded to the RV042G V01. Overall the RV042G hardware appears to function pretty good. The RV042G has faster throughput, but it is slightly slower in command/control response and boot than the RV082. I have now owned the RV042G about two days and have found a number of issues. Specifically, emailing logs doesn't work.
- Emailing logs does not work. RV042G does not appear to handle any type of connection authentication, it does not have a place for the senders user name or password. I have tried SMTP servers that require no authentication and ones that do, none of them work. RV082 worked fine with the Time Warner Cable (TWC) SMTP server, RV042G does not. Additionally, there is NO output in the logs to show a failure. So TWO bugs here. I have checked settings to ensure no blocking rules, have rebooted, and even did a factory default with no luck and absolutely no mention in the logs anywhere of failure to send.
Email is my primary issue, any suggestions on getting this working would be appreciated. I've also identified a number of other issues as well and included them here to avoid multiple posts. These are:
- Port 0 apparently responds to interrogation and shows CLOSED (not STEALTH per grc.com). This was NOT the case for the RV082 and is a potential security vulnerability as it cannot be redirected.
- Port 1 is CLOSED and apparently responds to interrogation. This was NOT the case for the RV082. Normally I would be good on the RV082. I could redirect any OPEN or CLOSED ports to the bit bucket (192.168.1.254 for instance). BUT, the RV042G Port Forwarding is NOT sending things to the bit bucket and instead decides to OVERRIDE the forwarding and respond to queries. So there are TWO bugs here. This is a potential security vulnerability.
- The ALL Logs tab shows nothing, but sub tabs do until AFTER you hit the clear button, then it works as expected. This happens every time you open the logs. Another poster identified this problem so this is confirmation of that issue. Also, once the dialog box for the log has closed, it will not open again until leaving the page and returning.
- Authentication failures will show up in the System Log but not in the Access Log?
- HTTPS html interface works fine in Firefox. However, turn it off and use just HTTP and there is a problem. Can't see the forms and buttons, can only see the background image. This isn't as much of a problem as I can just use HTTPS, however, with the RV082 when HTTPS was activated it would open the remote management portal regardless of whether the button was clicked or not. So really a non-issue but a bug none the less.
- RV082 could send 500 log events, RV042 can only send 100. Again, not a bug but a reduction in capability over the older RV082.
One last thing, your hardware version control numbers and firmware download page are confusing for the RV042G V01. Found this when I checked if there was a newer version of the firmware than what the RV042G shipped with. Here is what the firmware update page shows:
"Cisco RV042G Dual Gigabit WAN VPN Router"
"Firmware Release 4.2.1.02 - RV042, RV082, RV016 firmware 4.2.1.02-tm (V3 hardware required)".
The problem is that you reset the hardware version in the RV042G (V01). Just seems probable that someone will download the firmware for the RV042 V01 and try to put it on the RV042G V01.
I like the RV042G overall and will wait for updates for these issues (email logs would be nice sooner rather than later as this is an advertised feature). The RV082 was a great router for a long time ONCE most of the bugs were fixed, hoping the RV042G will be the same.

Guess I spoke too soon. If Remote Management = Disable and HTTPS = Enable, it will OPEN external access to port 443. So have to use an access rule to kill it off. Can STEALTH Port 1 as well with an access rule but have to block all traffic there. Cannot block Port 0 (make it STEALTH) with an access rule and this needs to be fixed in firmware.
So port forwarding does work but not when sent to the bit bucket, have to use an Access Rule instead. (You can see this by doing the following: turn off HTTPS and remote management and look at port 443 from the outside of the firewall. No response at all. Now enable HTTPS and keep Remote Management disabled and forward port 443 to an unused internal IP address. The port still shows up as OPEN but won't connect. Again, the RV082 did not exhibit this behavoir and would simply not provide any response to an external query if forwarded to an unused internal IP address.)
For clarity, I have the RV042G V01 with Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55).

DNS and other issues with SBS Server 2003

I see a lot of excellent information out here in the discussion group but I understand little of it. I am technology savvy but not an IT man, so please be patient when I ask questions to clarify your responses.
My first question should be an easy one to answer. Has anyone told you all that they appreciate your help today?
I DO !!! Thank you for your kind nature and your choice to help others (like me)!
Our 2003 SBS server has multiple issues. The server has two NICs; one for the WAN connection and one for the LAN.
Windows IP Configuration
Host Name . . . . . . . . . . . . : mathewsserver01
Primary Dns Suffix . . . . . . . : MathewsElectricalInc.local
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : Yes
DNS Suffix Search List. . . . . . : MathewsElectricalInc.local
Ethernet adapter Mathews Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #1
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E7
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 192.168.16.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
Ethernet adapter Network Connection to Router:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2
Physical Address. . . . . . . . . : 00-1E-C9-CE-C5-E6
DHCP Enabled. . . . . . . . . . . : No
IP Address. . . . . . . . . . . . : 10.yyy.xxx.10
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.yyy.xxx.1
DNS Servers . . . . . . . . . . . : 192.168.16.2
Primary WINS Server . . . . . . . : 192.168.16.2
NetBIOS over Tcpip. . . . . . . . : Disabled
#1 In Event Viewer (Local) Application I have recurring event Source=Userenv Event 1053 every 9 minutes.
#2 In Event Viewer Directory Service I have recurring event Source=NTDS General Event 1126 every hour.
#3 In Event Viewer DNS Server I have recurring event Source=DNS Event 6702.
Also, I am surprised that the LAN NIC #1 is not set up as DHCP!
What information may you require to assist me?
tmath2 in Houston

Hi,
Could you type “route print“ on CMD, and post the result here?
It would be helpful if you may describe the phenomenon of the problem? such as changes before the problem occurs, any prompt error message, related operations except for these logged Event ID.
You may reference the link below for reference.
Event Source Userenv and Event ID 1503:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+Operating+System&ProdVer=5.2&EvtID=1053&EvtSrc=Userenv&LCID=1033
Event Source NTDS and Event ID 1126：
http://support.microsoft.com/kb/305837
DNS 6702：
http://technet.microsoft.com/en-us/library/cc735806(v=WS.10).aspx
Best Regards,
Eve Wang
Thanks Eve! I appreciate your attempt to help. I inadvertently posted my reply for the Route table without quoting you first. Sorry about that.
As far as the problems go, time to logon to server > 5 minutes. Group Policy issues abound. DNS issues (as mentioned). Thought I had an easy one for you. Sorry about that.
I have one client computer running Windows 7x64 (call it My Workstation) that I back the server and other client PC's up to. The clients have no problem, but after a day or two, the server can no longer "see" the My Workstation and the backup fails.
But then when I reboot the My Workstation, the server "sees" it again!
Furthermore, I backup a 10TB RAID 6 array on
My Workstation to yet another client for redundancy (Call it WORKSTATION2-PC), but if I try to click on the computer icon in Windows Explorer for WORKSTATION2-PC, I get the error "Windows cannot access \\WORKSTATION2-PC. However if I type in
the ip address or WORKSTATION2-PC, I have no problems.
tmath2 in Houston

**** Bluetooth and keyboard issues after latest itunes and 10.6.5 update.-

read below
Message was edited by: Paulman!

Have been experiencing intermittent keyboard, trackpad and usb mouse function issues after installing the latest system and itunes updates, which was yesterday or day before.
(Lost even some work because the only way to get things moving was to restart.)
Tried solution (verify and repair disc permissions) that coconutmunk recommends under similar topic from 2007:
http://discussions.apple.com/thread.jspa?threadID=1190210
That solution fixed worst part of the problem: getting all 3 parts irresponsive.
It seems as problem is still not entirely solved as computer has once tried to lock all 3 again, however before I had chance to get concerned it locked up all 3 again by itself.
Yet, usb mouse keeps on getting disconnected every now and then randomly, even after 2 runs with disc permission solution.
Conclusion from 2007topics where people had issues with keyboards and/or mouse devices, was that it was Leopard system having those problems, nothing like that was reported in about Tiger system, as it seems.
Now, those problems were fixed back then with an update, but seems this new update has brought back old issues!
Frankly, I really do not have time with computer issues, on top of Maya being characteristically moody already every now and then, as I have to be done with a pretty big project only within few days!
Please PLEASE, Apple crew, fix this issue asap!
I really need those things working properly quick!
Thanks in advance!

After effects cc incomplete renders and other problems after installing 2014

i left an almost 5 minute long project rendering last friday only to find out this morning that the first 55 seconds where left out of the render, with my work area set to the entire timeline. in the past i've had some other issues such as no audio when setting the output to audio or corrupted audio when setting it to on.
i'm not entirely positive, but i think this problems started when i installed 2014 a few weeks ago.
anyone experiencing similar issues, do you find a correlation between them and having both cc and 2014 in the same machine?
thanks,
d.

There's no error on the log file, as far as the program concerns it rendered everything correctly.
My machine is an imac (iMac12,2) with 32gb ram and AMD Radeon HD 6970M with 2048 mb of VRAM.
My current settings (for approvals) are QT with H264 compression with audio output set to Auto and I'm rendering at half res, which in this project is 1024x1024 px, the render is taking approximately 4 and a half hours with MP off, last friday I tried it on and after 7 ours it only had less than 25% done and it said it still had 27 hours to go, so I canceled it and switch to MP off instead, it finished the render (incomplete, I found out today) in 2 hours and 38 minutes, plus 42 minutes for the missing portion this morning, which came with no audio.
I haven't rendered uncompressed or prores yet, but I will be doing tonight to see if that yields a different result.
Is this enough or you need more specifi data like solo switches settings, guide layers, etc?
Thanks,
D.

Power Mac G4 (sawtooth) AGP - Firmware and other issues

Hello,
So I was given an older Power Mac G4 AGP which I've been using while my Power Book G4 gets a logic board replacement but I've been having some issues with the AGP unit. How do you check to see what version of the firmware you have? I read a firmware update but it requires OS 9 to launch and I don't know if I need this or not. The other issue has been when I tried to run Firefox after successfully installing it. Firefox doesn't launch, it just opens and then closes. When I use Safari, the browser will work for about a few minutes but then it will freeze and I need to force quit it. I am running 10.4.11 and I was thinking of installing 10.5.6 but I'm not sure if this is possible with the Sawtooth. Do I need to upgrade the processor? Any advice or help is appreciated.

Hi, veesh678 -
Early models of the G4 (AGP) models came with OS 8.6; later models came with an installer for a model-specific version of OS 9.0.4. The latter disk will have a blue-gray label, be named "Power Mac G4" with a subtitle "Software Install", and has a part number of 691-2657-A (the part number will be in fine print on the right-hand side of the label).
Non-current firmware will not preclude the machine from booting to that CD; a retail OS 9.0.4 Install CD (white label, gold 9, no model named) probably will not work, although a retail OS 9.1 or 9.2.1 Install CD should work fine.
The current firmware version for the G4 (AGP) model is v. 4.2.8, which can be downloaded from this article -
Article #120068 - G4 Firmware Update 4.2.8
Note that to install that version the machine must be booted to OS 9.1 or OS 9.2.x from its hard drive, and the firmware update must be run from the same hard drive.
Before installing firmware update v. 4.2.8, download and run DIMM First Aid (it's a free download) to verify the compliance of the RAM in the machine.

Zbot and other issues after sophos scan

Similar Messages

Maybe you are looking for