ZCC Login failed after Migration from 11.3.1 FRU1 to 11.3.2
Hey,
System: 6 Primary Server Sless 11 SP3
LDAP: EDIR
Primary: 11.3.2
Sats: 11.3.1 FRU1
After Migration from 11.3.1 FRU1 to 11.3.2
i'll try to login in ZCC
Message ZCC
Error: Login Error: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
See the ZENworks Control Center log file (zcc.log) for the full stack trace.
I tryed with default admin and see that the USERSource is not reachable.
I take a look in the configuration / usersource and there is an Error like: Unable to read contexts. One or more of your connections don't support non-SSL.
ZCC.log sayed
[javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException] [ZENServer]
[DEBUG] [12/30/2014 09:54:02.417] [3547] [ZENServer] [72] [zenworks] [ZCC] [] [Form.java CSRF TOKEN:d1b804076c63e7393af1a72442ced4b5 for the PageId:authoritativeSourceDetails] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.144] [3547] [ZENServer] [85] [zenworks] [ZCC] [] [QuickTask build tasks called in createChildControls, normal flow before ajax] [] [] [] [ZENServer]
[DEBUG] [12/30/2014 09:54:03.348] [3547] [ZENServer] [69] [zenworks] [ZCC] [] [com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:179)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. validateCertificateExpiry(LDAPUtil.java:1162)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:774)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:559)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:386)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:359)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:325)
at com.novell.zenworks.datamodel.utils.ldap.LDAPUtil. getLDAPConnectionInfo(LDAPUtil.java:311)
at com.novell.zenworks.core.web.internal.UserSourceSt atusAJAX.getImageData(UserSourceStatusAJAX.java:77 )
at com.novell.web.ajax.ImageAJAX.service(ImageAJAX.ja va:38)
at com.novell.web.ajax.AJAXDataHandler.service(AJAXDa taHandler.java:40)
at com.novell.web.AjaxServlet.serviceImpl(AjaxServlet .java:100)
at com.novell.web.AjaxServlet.service(AjaxServlet.jav a:74)
at com.novell.zenworks.fw.web.internal.ZENworksAjaxSe rvlet.service(ZENworksAjaxServlet.java:47)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:727)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:303)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:241)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:208)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:220)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:122)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:501)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:171)
at com.googlecode.psiprobe.Tomcat70AgentValve.invoke( Tomcat70AgentValve.java:39)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:103)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:116)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1346)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:408)
at org.apache.coyote.http11.AbstractHttp11Processor.p rocess(AbstractHttp11Processor.java:1070)
at org.apache.coyote.AbstractProtocol$AbstractConnect ionHandler.process(AbstractProtocol.java:611)
at org.apache.tomcat.util.net.JIoEndpoint$SocketProce ssor.run(JIoEndpoint.java:316)
at java.util.concurrent.ThreadPoolExecutor.runWorker( ThreadPoolExecutor.java:1145)
at java.util.concurrent.ThreadPoolExecutor$Worker.run (ThreadPoolExecutor.java:615)
at org.apache.tomcat.util.threads.TaskThread$Wrapping Runnable.run(TaskThread.java:61)
at java.lang.Thread.run(Thread.java:745)
Caused by: javax.net.ssl.SSLHandshakeException: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.Alerts.getSSLException(Alerts.jav a:192)
at sun.security.ssl.SSLSocketImpl.fatal(SSLSocketImpl .java:1884)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:276)
at sun.security.ssl.Handshaker.fatalSE(Handshaker.jav a:270)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1439)
at sun.security.ssl.ClientHandshaker.processMessage(C lientHandshaker.java:209)
at sun.security.ssl.Handshaker.processLoop(Handshaker .java:878)
at sun.security.ssl.Handshaker.process_record(Handsha ker.java:814)
at sun.security.ssl.SSLSocketImpl.readRecord(SSLSocke tImpl.java:1016)
at sun.security.ssl.SSLSocketImpl.performInitialHands hake(SSLSocketImpl.java:1312)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1339)
at sun.security.ssl.SSLSocketImpl.startHandshake(SSLS ocketImpl.java:1323)
at com.novell.zenworks.security.certificates.Certific ateUtility.getCertChain(CertificateUtility.java:12 1)
at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getCertificates(CertificateManagerImpl .java:175)
... 35 more
Caused by: java.security.cert.CertificateException: Certificates does not conform to algorithm constraints
at sun.security.ssl.AbstractTrustManagerWrapper.check AlgorithmConstraints(SSLContextImpl.java:946)
at sun.security.ssl.AbstractTrustManagerWrapper.check AdditionalTrust(SSLContextImpl.java:872)
at sun.security.ssl.AbstractTrustManagerWrapper.check ServerTrusted(SSLContextImpl.java:814)
at sun.security.ssl.ClientHandshaker.serverCertificat e(ClientHandshaker.java:1421)
SR has been created.
Any Tipps /Hints for me ?
Thank You
Originally Posted by robpet
Should have said kind of the same problem...
That was sort of my gut feelings so I checked our certificates beforehand and they are using certs with sha1 fingerprint. But we are not using SSL - our connections are made using port 389. And the communication status is green.
But I cannot add SSL because it complains about "unable to obtain a valid certificate for SSL communication information. Please verify that the adress and port are correct and that the LDAP directory has been configured with a valid certificate.
So I cannot understand why users cannot authenticate with zenagent.
There's a TID about zcc login failures after 11.3 upgrade.
https://www.novell.com/support/kb/doc.php?id=7014716
We ran into the above.
Similar Messages
-
Report generation failed after migrated from 6i to 10g.
Hi All,
i have migrated the 6i application to 10g.
There was a report which was generated in .html format and saved to a remote server location.
Now after migration to 10g,when i run the report through the URL ,It is still generated on the same remote server location but the it is not showing in the application interface.
Please help....
Thanks,
DKHi, Mike,
user3211655 wrote:
Hi All,
We try to migrate a 8i database to 10g by using the exp and imp. All tables and data are already migrated by imp. During the imp, there are errors said the trigger compile with errors.
When login to the em to check, I found these 2 errors.
Line # = 2 Column # = 1 Error Text = PL/SQL: SQL Statement ignored
Line # = 2 Column # = 60 Error Text = PL/SQL: ORA-00942: table or view does not exist
My trigger is a very simple one:
BEGIN
Select TB_COUNTER_SEQ.NEXTVAL INTO :NEW.INCREMENT_NUM FROM DUAL;
END;
And I'm sure the "TB_COUNER_SEQ" is there.
Do I need to change anything on the trigger when migrating from 8i?
In fact, besides this trigger, all other trigger imp to this schema are having the same error. The schema in the 10g is a newly created one, is there any special right I need to create grant to this new user?Grant the necessary privileges on the tables (and any other objects used, like sequences) directly to the owner of the triggers. Privileges granted to a role don't count in AUTHID OWNER stored procedures; the privileges have to be granted to the owner of the stored procedure (or to PUBLIC).
It the error is occurring at position 60, then it looks like you don't have privileges on dual. Login as SYS and
GRANT SELECT ON dual TO PUBLIC;You may need synonyms (perhaps public synonyms) for the objects, too. -
Login error after migration from Snow Leopard to Lion
I went through the migration process to get all settings and data over from my MacBook (10.6.8) to my new Mac Pro (10.7.3). During the migration, I was logged into the old MacBook with my FileVault-enabled account. Migration completed successfully, but when I tried to log into the new Mac Pro, I got this error:
"You are unable to log in to the FileVault user account "user1" at this time. Log in to the account failed because an error occurred." [OK]
When I typed a password I knew was incorrect, the login box would do the familiar shaking. When I typed the correct password, I got the behavior above.
I was able to log in to the new Mac Pro as a different user (user2), even though user2 also had FileVault enabled on the old system.
When logged in as user2 on the new system, I was able to escalate privileges by authenticating as user1, so I knew the password for user1 was working. I gave user2 admin privileges and saw that user1's data had been copied over, but not as a sparsebundle - presumably because user1 was logged in at the time of migration.
To fix the login problem, I did the following:
1) Logged in as user2 on both source and target system, then escalated privs to give user2 admin rights.
2) Copied /Users/user1/user1.sparsebundle from source to target system:
- On target system, in System Preferences -> Sharing, enabled Remote Login for user2
- On source system, opened Terminal window and typed:
$ sudo -s
> [password for user2]
# cd /Users/user1
# scp -rp user1.sparsebundle user2@IP_address:
(where IP address is the actual IP address of the target system)
> [password for user2]
3) Moved aside the unencrypted files in user2's home directory:
- On target system, logged in as user2, in Terminal:
$ sudo -s
> [password for user2]
# chown -R user1 ~/user1.sparsebundle
# mkdir /tmp/user1
# chown user1 /tmp/user1
# cd /Users/user1
# mv * /tmp/user1
# mv .[a-zA-Z]* /tmp/user1
4) Moved the user1.sparsebundle into place (in same Terminal window on target system):
# chown -R user1 ~/user1.sparsebundle
# mv ~/user1.sparsebundle /Users/user1
5) Logged out of user2 account and logged back in as user1
6) Securely deleted the unencrypted files for user1 (in Terminal window as user1):
$ srm -rf /tmp/user1
Many thanks to @neirbowj for the analysis of why the migration failed!Go get a powered USB hub and try that. Lion may have issued a fix for devices drawing too much power, by cutting them off.
-
Can only access emails through OWA after migration from exchange 2007 to 2013
can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
After Migrating from 10g to 11g Geeting problems with Guided navigations.
After Migrating from 10g to 11g Geeting problems with Guided navigations and section navigations not working.
And we are getting the following error <<odbc driver returned an error (SQLExecDirectW)>> where we have used navigations.
In 10G we have Guided navigation Reports to display the Reports links and intermediate reports for conditionally displaying the Dashboard section(Reports) but after migrating to 11g Guided navigation reports and conditional reports are not working..
We know that in 11g section navigation replaced with conditions and Guided navigation replaced with action link.. but
do we need to recreate those reports in actions and condition or is there any work around avoid reworking.Hi Both,
Thanks for the reply ...
For Guided navigation we are getting like below error:
Odbc driver returned an error (SQLExecDirectW).
For Conditional dashboard section we are getting like below error:
"saw.aViewsToRefresh = [];saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:3jsmgfs3c1r4tn7c~n:condition'] = true;saw.aViewsToRefresh['d:dashboard~p:1egt6il5utl0uu8n~s:nos5q43jvjmi643b~n:condition'] = true;" -
Hotkey (Ctrl+B) is not working after migration from Forms 6i to 10g
Dear Gurus,
Need your help regarding the following problem:
After migrating from Forms 6i to 10g (Rel 2), Ctrl+B (used to list the blocks in a form) hotkey is not working anymore (all other hotkeys are working fine). I've checked my FMRWEB.RES and it contains an entry for Ctrl+B:
66 : 2 : "Ctrl+B" : 70 : "Block Menu"
Additional Information:
OS: AIX
NLS_LANG = UTF8
fmrweb_utf8.res also contains the same text for Ctrl+B as above.
I tried to reproduce it on my Windows Machine (with NLS_LANG set to AMERICAN_AMERICA.WE8ISO8859P1) and its not working as well. I don't have right to put move files on AIX server but i can try anything (on my local system) suggested by the Oracle gurus.
Best Regards,Dear Gerd,
"are you sure, that it is the hotkey"
Yes, i am dead sure. Since:
(1) It was working fine in forms 6i
(2) If you run a form and select Help => Keys, you will see Ctrl+B on the top of list
The problem is its not taking into account the keys which i am defining in the file (although i am following the same procedure detailed on metalink.oracle.com).
Regards -
NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g
NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya -
Mail "unexpectedly quits" after migration from snow leopard to new iMac running Mountain Lion
Mail "unexpectedly quits" after migration from snow leopard time machine files to new iMac running Mountain Lion. I can run connection doctor OK. But the activity window is blank. If you try to open message viewer window then mail program crashes. Would really like to get my old emails back as the old imac is totally dead. Thanks for any help.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Cant find my iTunes library after migration from old PC to new Mac
Can't find my iTunes library after migration from old PC to new Mac?
Migration Assistant has transferred itunes content, but where is it on new iMac?
https://discussions.apple.com/thread/3358162?start=0&tstart=0 <<< click here for a possible answer. -
Unable to get the login page after upgrade from 11.5.10.2 to R12
Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBAHi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA -
Increase in CPU Utilization after migration from APEX 3.1.2 to APEX 3.2
Has any noticed any increase in CPU Utilization after migrating from APEX 3.1.2 to APEX 3.2?
Thanks,
MarkHi Mark,
Take a look at some of the usage reports within APEX (sessions, page views etc) to get an overall feel for where the time is being consumed.
You'll also find it useful if you can run a statspack report (or AWR, ASH etc) during a busy period to be able to drill down into where that CPU is being spent.
There's no magic answers here unfortunately, you need to track it down to where the time is being spent before working back up to find out where best to tune it.
John.
Blog: http://jes.blogs.shellprompt.net
Work: http://www.apex-evangelists.com
Author of Pro Application Express: http://tinyurl.com/3gu7cd
REWARDS: Please remember to mark helpful or correct posts on the forum, not just for my answers but for everyone! -
STP playback is erratic after migrating from 10.4.11 to 10.5.8
After migrating from 10.4.11 to 10.5.8
SoundTrack Pro playback is erratic,
i.e; audio stops and starts with a few small click noises.
Your suggestions will be mostly appreciated.Thanks for your reply.
STP version 2.0.2
Audio is straight out no interface and works fine besides erratic stop-start playback. -
Just got a new imac and my iwork software wont work. I have the serial numbers but after migrating from my old mac running OSX tiger it won't even give me that opportunity. I do not have any discs as this was downloaded. Help
Hi, hopefully you guys can help me out, I just
purchased a G5 iMac to replace my aging dell desktop,
and now i'm more or less completely os x dependant
(I've had an ibook for a few months now). Anyway, I
have a few questions:
1. Does anyone know of a (free) mail notifier tool,
that will alert me when I recieve new pop3 mail? I
used to use AIM for this in windows
The built in email program does sound an alert for new messages.
2. Anyone know of a good (free, again) IRC client?
iChat works well.
3. I noticed earlier that my screen was flickering,
it seems to have subsided for now, but is that normal
to encounter in a new display? It wasn't really bad
flicker, but I could see it.
No idea.
4. I leave my desktops on 24/7x365, will that be a
problem with this iMac? Display shuts off of course
after 30 mins
You could set the iMac to go to sleep after non use. My Macs are
always sleeping when not in use, waking them up takes seconds.
Unlike windoze, never knew if it would be locked up or not.
5. Should I get the extended warranty? I'm usually
against them, but I am expecting this computer to
last me at least 3 years (for $1300 it better!)
before I upgrade, as I got that much out of a Dell
and from what I understand, Mac's do not age nearly
as fast as Windows pc's.
It is well worth the cost. Never know what might happen. Also
it is good insurance for future upgrades. I traded in my G4 tower
purchased two years ago for 75% of what I paid for it. Apple care
transfers, giving the buyer the remainder of your warranty.
Thank you for any help,
-Evan -
Testing of SAP BW system after migration from OS Unix to windows
Hi Experts,
I am working on a project wherein testing of BW system is required after migration from OS Unix to Windows.
If any one has done same set of activities in past or has any idea of this, please share all major test steps required after migration.
Thanks in advance.
Regards,
NeerajHi Neeraj,
I will paste the list we used for our upgrade from 3.1 to 7.0. I removed some company specific details. Sorry for the "lay-out", it is copied from excel, this messes up the whole message.
best regards, André.
Preparation PHASE 1
Review New Functionality Review BW section on SAPNet for latest information on new release
Confirm Upgrade Timing (First Sat)
GUI Upgrade Install GUI's for Upgrade Test persons
"Check Prerequisites -Operating System
-SAP Kernel
-DBMS
-Disk space
-R/3 plugin
-BW software version and SP
Citrix.."
"Check Compatibility Reqs with other systems APO
ECC6.0"
Check Compatibility Reqs with 3rd party software ?
"Test Team 2004s Delta Training To
have idea on new functionality
not have confusion if looks different.."
"End User Communication: upgraded system and changes e.g. right vs left click
- send out communication twice"
End User Communication: several "look and feel" sessions NOTE: incorporate WISBECH !!!
Setup Portal connected to BW QA for testing once upgraded Setup Portal connected to BW DEV for testing once upgraded
Check best go live date - based on assuption 2 days needed
Determine test set - based on input BS / KU
Estimate resources Business for testing
BluePrint PHASE 2
Check/CleanUp Development Objects Check all open and not-released developments for release prior to upgrade
Prepare System Setup Prepare (if needed) flat-files for test loads
Check OSS for release notes on objects Each functional area should check out OSS for release notes on objects (for changes etcu2026, new functionality)
"Prepare (detail) list of objects to be tested Complete list of objects to be tested, special attention to custom/non-standard programs, enhancements. List of:
- extractors
- process chains
- reports"
"Setup delta mechanisms (create transaction data) BackEnd Test: Financial Extraction and load, process chains
u2022tbd
u2022
u2022 "
Verification / creation of process chains Check existence of to-be-tested process chains; if none, create 'sample' process chains
Realization PHASE 3
Prior to Upgrade: Install any necessary frontend software
Prior to Upgrade: Install any necessary frontend software (end-users)
Prior to Upgrade: Complete any extraction - suspend V3 and scheduled BW jobs
Create Sandbox
Connect Sandbox to external systems (connections/BDLS)
Pre-upgrade steps
Perform Upgrade of BW
Check connection with R/3/APO
Perform system backup
"BackEnd Test: Logistics extraction and load, process chains
u2022 Z_example_CHAIN
u2022 2lis_03_BF and 2lis_03_BX Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Sales Extraction and load, process chains
u2022 Z_SALES_1
u2022 all lis extractors:
u2022 12_vcitm
u2022 13_vditm
u2022 11_vaitm
u2022 11_vahdr
u2022 11_v_ssl
u2022 11_vasti
u2022 12_vcscl
u2022 selection of z-extractors
Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Financial Extraction and load, process chains
u2022 0FI_GL_4
u2022 NOTE: no further extractors are chosen for testing
u2022 tbd Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Master Data... Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Zxxx Extraction and load, process chains
u2022 Z_TRANSACTION_DATA
u2022 Zxxx
u2022 Zyyy Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: Plant Maintenance Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: PP Extraction and load, process chains Test: load from Zxxx
"BackEnd Test: Purchasing Extraction and load, process chains Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
"BackEnd Test: APO Extraction and load, process chains
u2022 ZAPOxxx
u2022 ZAPOyyy
u2022 others can be tested, but were not included in de testset Test:
- Extractor within process chain preferably otherwise mimic behavior (drop index, load, rebuild, aggragate etc)
- Delta extraction"
BackEnd Test: Regular Schedule - Production
BackEnd Test: Flat file upload Test: 2 types from server and PC
BackEnd Test: Test Admin Workbench: creation of objects, change existing Test the Admin Workbench: creation of infoobjects, change infoobject, create/change hierarchy, create cube,u2026
BackEnd Test: Test Bex: creation of queries (kf etc...); change existing Creation of new query/ change query, create condition, calculated/restricted kf, variables,..
BackEnd Test: Issue handling
Development box issue fixing - on forehand apply fixes based on issues BWQ
FrontEnd Test: Run Logistics Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Sales Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Supply Chain Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Financial Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Controling Reports Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Master Data and Special Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run PM Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run Purchasing Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Run APO Reports (log results in Reports tab) Run reports, execute various navigation steps, make sure to execute each item of menu paths,validate no loss of functionality, report new functionality. Run few managed bookmarks
FrontEnd Test: Issue handling
FrontEnd Test: Make before image of reports - Production Run reports; save of before image to compare once upgraded
FrontEnd Test: Run All Reports - Production Run reports, execute various navigation steps, compare with 'before image' taken in prevous step
Test Security Test security with various end-user roles/IDS other than BW developer (usually has * ALL)
Test Portal integration Test portal with various end-user roles/IDS other than BW developer (usually has * ALL)
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:50 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM
Edited by: A. Nagelhout on Feb 12, 2010 10:52 AM -
After Migrating from Sharpoint 2010 to Sharepoint 2013 list filter options changed
Hi All,
After migrating from SP 2010 to SP2013 i found list View filter option is changed and filter is not working Pls help its really urgent.... you can check field 1 and field 2 in following screen shot.
Prasad kambarHi ,
According to your description, my understanding is that your list filter cannot work after Migrating from SharePoint 2010 to SharePoint 2013.
For your issue, please check your log files for any issues. Also you can refer to the blogs for troubleshooting SharePoint 2013 migration:
Firstly try running Test-SPContentDatabase on your source database for any issues -
Test-SPContentDatabase - http://technet.microsoft.com/en-us/library/ff607941.aspx
Troubleshoot site collection upgrade issues in SharePoint 2013 http://technet.microsoft.com/en-us/library/jj219648.aspx
Verify database upgrades in SharePoint 2013 -http://technet.microsoft.com/en-us/library/cc424972.aspx
And please have a look at your custom solution on your site.
Best Regards,
Eric
Eric Tao
TechNet Community Support
Maybe you are looking for
-
For example I download a file and I click on it and there will sometimes be a window that opens saying what program I want to open the file with? And then it'll also have a check box saying if I want to use this program for all files I download. I ca
-
Safari Won't Open and Can't Reinstall
All of a sudden Safari will not open and ends with the following message:Safari cannot open a browser window and may be missing important resources. Try installing Safari again.I have tried to install it from my original Tiger disk but it starts and
-
API pa_project_pub.UPDATE_TASK is not updating attributes
Hi All, I am facing a strange problem in calling API pa_project_pub.UPDATE_TASK. It updates fields like task name, description etc, but it doesn;t updates attribute8, or any attribute fields. The DFF which is on this table pa_tasks, is context basis,
-
Photoshop CS6 Color Management Inaccuracy
Adobe: Just a reminder, this color-management problem that I reported against Photoshop CS5 is still around: http://forums.adobe.com/message/3475331 It's illustrated here in this screen grab, showing the visibly inaccurate result of Photoshop's tran
-
How can I show Totals in at the footer?
Hi, I want to create a List (Report) with a Number column say (Amount), and there are certain number of transactions on the page. How can I show Total Amount at the bottom of report? Thnx in advance.