ZCI and ADS problem when creating forms in ABAP WEB DYNPRO

1.)
My ZCI problem is, whenever I try to create a form, i choose ZCI layout, then want to insert Web Dynpro Script, i get the message:
"Error when inserting Web Dynpro Script"
Therefore I cannot activate my forms.
2.)
I also tried to configurate ADS in transaction SM59. When trying the Check connection button, it works, but when trying report FP_PDF_TEST_00, a logon window pops up, whichafter I get the errormessage:
ERRORCODE : 100.101
Why is that, and how can I solve this?
Thanks, Bye,
Peter

Hi !
I found 5 server logs.
In server.2.log I found this, that' s probably the exception I caused:
#1.5#0013D3EA4A430047000005330000031800043F71AC53F84C#1195657361859#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.ads.request.RenderErrorLog#ADSUSER#35491#SAP J2EE Engine JTA Transaction : [172ffffff803e00333]####SAPEngine_Application_Thread[impl:3]_10##0#0#Warning#1#com.adobe.ads.request.RenderErrorLog#Plain###Cannot generate Log.pdf#
#1.5#0013D3EA4A430047000005340000031800043F71AC53F8BE#1195657361859#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServicesWorker#ADSUSER#35491#SAP J2EE Engine JTA Transaction : [172ffffff803e00333]####SAPEngine_Application_Thread[impl:3]_10##0#0#Error#1#com.adobe.AdobeDocumentServicesWorker#Plain###General exception while merging XMLForm Module Render log data into log.pdf#
#1.5#0013D3EA4A430047000005360000031800043F71AC53FC53#1195657361859#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServicesWorker#ADSUSER#35491#SAP J2EE Engine JTA Transaction : [172ffffff803e00333]####SAPEngine_Application_Thread[impl:3]_10##0#0#Error#1#com.adobe.AdobeDocumentServicesWorker#Plain###Processing exception during a "Render" operation.
Request start time: Wed Nov 21 16:02:41 CET 2007
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://nw04s.dyndns.org:50200/sap/bc/fp/form/layout/ZZ_PB_ATTEMPT.XDP?fp-language=EN
Not Found
Exception Stack Trace:
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://nw04s.dyndns.org:50200/sap/bc/fp/form/layout/ZZ_PB_ATTEMPT.XDP?fp-language=EN
Not Found
 at com.adobe.ads.destination.Destination.readUrlStream(Unknown Source)
 at com.adobe.ads.destination.Destination.readTemplate(Unknown Source)
 at com.adobe.ads.data.DestURLData.setData(Unknown Source)
 at com.adobe.ads.data.DestURLData.<init>(Unknown Source)
 at com.adobe.ads.data.PDFData.createFromURL(Unknown Source)
 at com.adobe.ads.data.PDFData.create(Unknown Source)
 at com.adobe.ads.request.Template.setPDFData(Unknown Source)
 at com.adobe.ads.request.Template.initialize(Unknown Source)
 at com.adobe.ads.request.Renderer.initializeTemplates(Unknown Source)
 at com.adobe.ads.request.Renderer.execute(Unknown Source)
 at com.adobe.BaseADSRequest.doWork(Unknown Source)
 at com.adobe.AdobeDocumentServicesWorker.processRender(Unknown Source)
 at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source)
 at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
 at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
 at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
 at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
 at SoapServlet.doPost(SoapServlet.java:51)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#0013D3EA4A4300500000011B0000031800043F71CEEDC838#1195657942250#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.ads.request.RenderErrorLog#ADSUSER#35551#SAP J2EE Engine JTA Transaction : [172ffffff803e0033f]####SAPEngine_Application_Thread[impl:3]_12##0#0#Warning#1#com.adobe.ads.request.RenderErrorLog#Plain###Cannot generate Log.pdf#
#1.5#0013D3EA4A4300500000011C0000031800043F71CEEDC8B3#1195657942250#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServicesWorker#ADSUSER#35551#SAP J2EE Engine JTA Transaction : [172ffffff803e0033f]####SAPEngine_Application_Thread[impl:3]_12##0#0#Error#1#com.adobe.AdobeDocumentServicesWorker#Plain###General exception while merging XMLForm Module Render log data into log.pdf#
#1.5#0013D3EA4A4300500000011E0000031800043F71CEEDCC40#1195657942250#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServicesWorker#ADSUSER#35551#SAP J2EE Engine JTA Transaction : [172ffffff803e0033f]####SAPEngine_Application_Thread[impl:3]_12##0#0#Error#1#com.adobe.AdobeDocumentServicesWorker#Plain###Processing exception during a "Render" operation.
Request start time: Wed Nov 21 16:12:22 CET 2007
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://nw04s.dyndns.org:50200/sap/bc/fp/form/layout/ZZ_PB_ATTEMPT.XDP?fp-language=EN
Not Found
Exception Stack Trace:
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://nw04s.dyndns.org:50200/sap/bc/fp/form/layout/ZZ_PB_ATTEMPT.XDP?fp-language=EN
Not Found
 at com.adobe.ads.destination.Destination.readUrlStream(Unknown Source)
 at com.adobe.ads.destination.Destination.readTemplate(Unknown Source)
 at com.adobe.ads.data.DestURLData.setData(Unknown Source)
 at com.adobe.ads.data.DestURLData.<init>(Unknown Source)
 at com.adobe.ads.data.PDFData.createFromURL(Unknown Source)
 at com.adobe.ads.data.PDFData.create(Unknown Source)
 at com.adobe.ads.request.Template.setPDFData(Unknown Source)
 at com.adobe.ads.request.Template.initialize(Unknown Source)
 at com.adobe.ads.request.Renderer.initializeTemplates(Unknown Source)
 at com.adobe.ads.request.Renderer.execute(Unknown Source)
 at com.adobe.BaseADSRequest.doWork(Unknown Source)
 at com.adobe.AdobeDocumentServicesWorker.processRender(Unknown Source)
 at com.adobe.AdobeDocumentServicesWorker.execute(Unknown Source)
 at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
 at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
 at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0.java:120)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
 at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
 at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
 at SoapServlet.doPost(SoapServlet.java:51)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#1.5#0013D3EA4A430051000001570000031800043F71DDC53630#1195658191203#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.ads.request.RenderErrorLog#ADSUSER#35577#SAP J2EE Engine JTA Transaction : [172ffffff803e003317]####SAPEngine_Application_Thread[impl:3]_13##0#0#Warning#1#com.adobe.ads.request.RenderErrorLog#Plain###Cannot generate Log.pdf#
#1.5#0013D3EA4A430051000001580000031800043F71DDC536AC#1195658191203#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServicesWorker#ADSUSER#35577#SAP J2EE Engine JTA Transaction : [172ffffff803e003317]####SAPEngine_Application_Thread[impl:3]_13##0#0#Error#1#com.adobe.AdobeDocumentServicesWorker#Plain###General exception while merging XMLForm Module Render log data into log.pdf#
#1.5#0013D3EA4A4300510000015A0000031800043F71DDC53A39#1195658191203#/System/Server#com.adobe/AdobeDocumentServices#com.adobe.AdobeDocumentServicesWorker#ADSUSER#35577#SAP J2EE Engine JTA Transaction : [172ffffff803e003317]####SAPEngine_Application_Thread[impl:3]_13##0#0#Error#1#com.adobe.AdobeDocumentServicesWorker#Plain###Processing exception during a "Render" operation.

Similar Messages

Submit button in interactive adobe form in abap web dynpro

Hi can anyone help me out to know hoe to use the submit button in adobe interactive form in abap web dynpro .
Iam creating a adobe form abap web dynpro . There i need to use the submit button to trigger some action in the adobe interactive form .
So i need to know how to use the submit button and coding for that in the abap web dynpro .
Vighnesh

Hi Michelle,
Could you tell me how you resolved the problem - as I'm facing exactly the same issue!
Many Thanks
Christine

Problems when creating form using wizard

i use the data block wizard to create a form but one of my field, i use a radio button.in the layout editor, the radio button did not appear.how can i make it appear on my screen?
i have another problem.
how can i use the colunm of two tables when using data block wizard to create one data block?

Hello Nicky,
You can place the "Signature Field" in the form and ask your users to sign the file before submitting it via email.
Regards,
Anoop

Creating Adobe Interactive Forms in ABAP Web Dynpro

Hi,
I am a begineer to ABAP PDF Form development. Anyone could help me to develop Adobe interactive forms (online and offline cases) using ABAP WebDynpro. I would need Thanks.step by step procedures to develop quickly. I have found the material mostly related to Java. Please suggest some links related to ABAP WebDynpro. What aee the methods that would be called to update a form, open a form and upload/download a form.
Regards,
Namita Bhan

http://www.sdn.sap.com/irj/scn/interactiveforms-elearning
the above link helps you out witht he best e learning sessions
http://wwwimages.adobe.com/www.adobe.com/enterprise/partners/pdfs/solution_in_detail_interactive_forms.pdf
this also is a very helpful document
If you have any specific queries please feel free to shoot
Cheers
Senon

Calling Adobe form via ABAP Web Dynpro

Hi
Ive followed the below WIKI and have encountered an issue and finding it rather frustrating to resolve
http://wiki.sdn.sap.com/wiki/display/WDABAP/CallAdobeFormthroughABAPWebDynpro
Im fairly new to this to pls excuse my ignorance
The message Im getting when I check for errors in my MAIN view is
""A label must refer to element "DISPLAY_NO".""
The procedure tells me the follow
a) Create a label and bind its 'Label for' property to the UI element.
b) Select the label's 'Text' property, bind it to an appropriate context attribute or, alternatively, set the quick info (or accessibility description - if one exists) for the UI element.
c) Either set the visibility of the label to "visible" or set the element that the label refers to as invisible.
Im just not sure where to correct this under my DISPLAY_NO element
Im not sure if thisis the reason why im getting the UNCAUGHT_ EXEPTION - CX_WD_GENERAL runtime error as well
Telling me my object Z************* does not exist
Regards
Justy

Hi...
in your view for element DISPLAY_NO, There is no label. So create one label and
in corresponding label properties bind its 'Label for' property to the display_no ui element.
And did you activate your component ? if above is the error, you will not able to activate the component. So first check and activate component. if you get any error related to DISPLAY_No, then follow the above procedure.
if you have any doubts, post the same back
Regards
Srinivas

How to create search help for Web Dynpro?

Hi all,
I have troubles when creating search help for web dynpro. I have visited this link /people/dirk.rehberg/blog/2006/12/27/generic-search-help-for-web-dynpro-for-java but I can't find this generic search help plug-in for download. If u have this plug-in can u share it for me or upload somewhere for download. Or anyone has already done this search help please help me solve this problem! Thanks in advance!

Hi Dinh Thieu Thien,
please place such a request to the appropriate forum "[Web Dynpro for Java|Web Dynpro Java;".
Thanks and regards,
Boris

Testing ABAP Web dynpro: Error code 403 and for the reason Forbidden

Hi,
We have NW04s Installed and trying to execute a SAP supplied ABAP web dynpro application DEMO_SIMPLE_MAIN. Please see the following error and let us know which service it's talking about? I am familiar with SICF. However in AS7.0( New name for WEB AS ) The transaction is little different.
Thanks
Arunava
However we are getting the following service error
Service cannot be reached
What has happened?
URL http://server.domain.name.com:8001/sap/bc/webdynpro/sap/demo_simple_main call was terminated because the corresponding service is not available.
Note
The termination occurred in system XXX with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:NAME999_XXX_01-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team

Hi,
this was actually some services which needed to be started through SICF. Once I have started the service sap/bc/public ETC.. and the web dynpro started working. Most of the SAP delivered demo apps are working
However for some ABAP web dynpro ( for some application XRPM ) I get some peculiar error. Please see below and if you could think of anything out of these.
I have already checked and found the both HTTP and SMTP services are working fine.
The following error text was processed in the system PXA : Syntax error in program /1BCWDY/56ZRPAZLU25M8S1BKV2T==CP .
The error occurred on the application server fmsap994_PXA_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CONSTRUCTOR of program CL_WDR_CLIENT_COMPONENT=======CP
Method: CONSTRUCTOR of program CL_WDR_CLIENT_APPLICATION=====CP
Method: CREATE_APPLICATION of program CL_WDR_CLIENT_APPLICATION=====CP
Method: EXECUTE of program CL_WDR_MAIN_TASK==============CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

Problem when creating Database (Database, OS and hardware Configuraiton included)

Problem when creating Database:
Below are the problems, which I faced during creation of database. I have mentioned both the problem separately. Plus the log file maintained by Oracle during installation. It might help in diagnosing the error. Plus a little conclusion with I turned up to.
There are two problems, when creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Log File Showing Error :
Result code for launching of configuration tool is 0
Launched configuration tool Oracle Database Configuration Assistant
Command which is being spawned is C:\Program Files\Oracle\jre\1.1.7\bin/jrew.exe -Duser.dir=d:\oracle\ora81\assistants\dbca\jlib -classpath ";C:\Program Files\Oracle\jre\1.1.7\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.7\lib\i18n.jar;d:\oracle\ora81\jlib\ewt-3_3_6.jar;d:\oracle\ora81\jlib\share-1_0_8.jar;d:\oracle\ora81\jlib\swingall-1_1_1.jar;d:\oracle\ora81\assistants\dbca\jlib\dbassist.jar;d:\oracle\ora81\assistants\jlib\jnls.jar;d:\oracle\ora81\assistants\jlib\acc.jar;d:\oracle\ora81\jlib\help-3_1_8.jar;d:\oracle\ora81\jlib\ice-4_06_6.jar;d:\oracle\ora81\jlib\netcfg.jar;" DBCreateWizard -progress_only -responseFile NO_VALUE -createtype seed -numusers NO_VALUE -apptype NO_VALUE -cartridges NO_VALUE -options NO_VALUE -demos NO_VALUE -seedloc d:\oracle\ora81\starterdb -sid ora8i -orabase d:\oracle -clususer NO_VALUE -cluspswd Protected value, not to be logged -nodeinfo NO_VALUE -gdbName ora8i
Invalid Exit Code. The following result code will be used for configuration tool: 1
Configuration tool Oracle Database Configuration Assistant failed
The datafiles will be copied from the CD to d:\oracle\oradata\ora8i. The Oracle Database Configuration Assistant will begin creating the database.
An Oracle database will be created for you. The database name will be ora8i. The system identifier for the database will be ora8i. The password for the INTERNAL account will be ******, the SYS account will be change_on_install and the SYSTEM account will be manager.
Log File of Installation:
The above code is a part of the log file, which is generated by Oracle installer at C:\Program Files\Oracle\Inventory\Log\..
I just pasted the part of code, highlighted is the code showing error with Oracle Database Configuration Assistant.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

Dont't worry about that. Before you
create a table(or view), it is wise to
drop the table(or view) with the same name.
If the name doesn't exist, of course there
is an error message. See the following script:
-------------------begin-----------
drop table students cascade constraints;
create table students (
sid varchar2(5),
fname varchar2(20),
lname varchar2(20) not null,
minit char,
primary key (sid));
--------------end-----------------
Good day!
null

Problem when creating Database with Database, OS and hardware Configuraiton

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating Database (Database, OS and hardware Configuraiton)

Problem when creating Database:
There are two problems, which I faced during creation of database. When creating database with Oracle Database Assistant. One when creating pre tuned database from CD. And second when creating customized database giving options your self.
Problem # 1:
When creating pre tuned database from CD. The process of creating Database is 90 % complete and is at step # 3 Initializing Database. It gives error ORA-03113: end-of-file on communication channel.
I searched following oracle help for this problem.
ORA-03113: end-of-file on communication channel
Cause: An unexpected end-of-file was processed on the communication channel. The problem could not be handled by the Net8, two-task software. This message could occur if the shadow two-task process associated with a Net8 connect has terminated abnormally, or if there is a physical failure of the interprocess communication vehicle, that is, the network or server machine went down.
Action: If this message occurs during a connection attempt, check the setup files for the appropriate Net8 driver and confirm Net8 software is correctly installed on the server. If the message occurs after a connection is well established, and the error is not due to a physical failure, check if a trace file was generated on the server at failure time. Existence of a trace file may suggest an Oracle internal error that requires the assistance of customer support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Problem # 2:
When creating database with custom option. The process of creating Database is 2 % complete and is at step # 2 Creating Database Files. It gives error ORA-12571: TNS:packet writer failure.
I searched following oracle help for this problem.
ORA-12571: TNS:packet writer failure
Cause: An error occurred during a data send.
Action: Not normally visible to the user. For further details, turn on tracing and re-execute the operation. If error persists, contact Worldwide Customer Support.
Conclusion:
What I conceive from this problem and the help available is that, I have to install NET8 again. But I am not sure about the solution, please tell me whether I am rite or not.
Software & Hardware Configuration are as follow:
Software:
Database
Oracle 8.1.7.0.0 (Oracle8i)
Operating System
Microsoft Windows 2000
5.00.2195
Service Pack 2
Hardware:
x86 Family 6 Model 8 stepping
10
AT/AT COMPITABLE
260,400 KB RAM

user563502 wrote:
I am working on Solaris 8. What is Alert_SID.log? where can I find it?
ThanksFor the responsible of the upgrade of Oracle database, not even know what Alert log is?
to be honest with you, this is not your work.

Problem when creating a sales order with reference by BAPI

I am facing one problem when creating Sales Order.
The scenario is like this while creating SO With reference to an Order type, a new SO will be automatically created with a diff order Type.
I am using "BAPI_SALESORDER_CREATEFROMDAT2".
I am calling this BAPI in USEREXIT_REFRESH_DOCUMENT.
Am I using the right exit to call this Bapi ?
Problems are like :
1. Ref Sales Order creating without Sales Unit .
2. "Object Status does not exist" error msg is coming for Header and Item level(when clicking the status tab and then object status pushbutton). But if testing the bapi from SE37 in test sequence....no such problem persists.
As for example in case of sales unit,in the debugging mode i have seen that BAPI uses a perform to fill the values in the VBAP structure.But after that when it come back to the main program VBAP remains blank.This ocuurs when the BAPI is called from the exit whereas if tested from SE37, VBAP retains the value.
Can u suggest in this ? This is very very urgent............
Thx in Adv.........................

Thanks........
Your suggestion was a great help to me.I have used a custom FM and called it in starting new task.
Since i am a university fresher working in SAP for nearly 1 year.....can you please explain me the difference between in update task and starting new task.Why the problem was occuring for which you have suggested to call a custom function module.
what is V1 update and V2 update?Is it attached with asynchronous ans synchronous update.It would be a great help to me if you kindly clear my confusions....
thanks in advance.

Problem when creating CAF Entity Service finder Methods

Guys,
Can any one please suggest me appropriatly to the below problem.
I am using NWDS 7.06. I have no problem when creating CAF project, Application Service and Entity Service even.
But in the Entity Service:
1. Add a string or longtext attribute.
2. try to create a custom finder method in operations tab, during that operation i am not finding the attribute which i have created in step1.
That means i am not able to create the my own finder methods with parameters.
I was able to do that in some version long ago but i have forgotten that NWDS version.
summary of Problem Is: " Cannot create custom methods with custom parameters in Entity Service"
Can you please suggest me the right version or a solution to this problem on urgent basis please.
I promise you that i will give you full points to you who ever gives me the right solution.
Please mail your suggestions to [email protected]

Guys,
I have solved the problem successfully. Thanks for your attention.

Problem when Creating Project (Composite Application Services) in NWDS

I've seen a few posts regarding this but I don't feel as if any real solution was given.
I just installed Netweaver Developer Studio (7.0.15) with the current JDK/JRE (1.6.0_07). When trying to create a new Composite Application Services project within the Studio, using the new project wizard, I get an error: Problem when Creating Project.
I get the EJB Module and Dictionary to create within my navigator with no problems, however, during the creation of the metadata, the error occurs. I do have the metadata folder appear within the navigator, but nothing in it. None of the other three items are created.
I have tried the attempt at deleting the metadata folder within my workspace directory and trying again but the same exact result occurs.
Is there any other solution out there for this problem besides attempting to find older versions of NWDS, etc. that are more "stable"?
Thank you!

Durga,
Very simple but effective solution.
I had tried uninstalling / re-installing NWDS with no effect but uninstalling / re-installing NWDS AND all java related products on my machine did work.
Note: For anyone else with this issue in the future. I installed the Java SDK / JRE 1.4.2_18 with NWDS 7.0.15 in case this is also a possible issue with versions.
Thanks, Durga!

Problem when creating contract with foreign trade / customs

Hi,
I encountered a problem when creating contract / outline agreement.
I used ME31K to create a contract with a vendor outside of our country. I suppose that I should be able to see "Foreign Trade / Customs" in "Header" menu, but this entry is gray, I cannot enter it.
I tried to create a scheduling agreement using ME31L with the same vendor and material, I can see "Foreign Trade / Customs" information. I suppose these two process are similar, aren't they?
Btw., I checked the master data according to this thread:
http://help.sap.com/saphelp_46c/helpdata/en/ed/3b6cc697e711d1b4e20000e82d81b0/content.htm
Can anyone give me some hint?
Thanks!
Charlie

These two processes are different:
The Contract agreement or the Outline Agreement is that create the centrally contract (cross-plant) where it can maintain different pricing conditions for each and every plant. It creates the Release Order with reference to Outline Agreement. No detailed delivery schedule can be made in the Release Order. No Release documentation is created. Only time-dependent conditions can be created, Some Item Category 'M' and 'W' can be used.
Whereas the Scheduling Agreement is the Plant Location what must be entered in the Scheduling Agreement. Its no need to create any other purchasing document except for delivery schedule line via Transaction ME38 or MRP running (with the appropriate setting of Source List). Delivery Schedule line items are created subject to your specific requirement. It can create both Scheduling Agreement with or without release of Documentation (subject to the Document Type LP or LPA) with the selection of either FRC or JIT delivery schedule. Either time-dependent or time-independent conditions can be created subject to the customizing in the Document Type of the Scheduling Agreement. Item Category 'M' and 'W' can not be used.

Website structure causing problems when creating livecopy based on a blueprint

Hi,
Our website structure goes like this:
company/
     products/
     services/
     contact us/
     etc...
Our site is single language and hence the structure. Now we have a problem when creating a livecopy (for mobile site) based on a blueprint.
It seems that for the livecopy (based on a blueprint) to work, the site structure needs to be like this:
company/
     en/
          products/
          etc...
It's too late for us to include another layer. What's the best way to create a livecopy based on a blueprint? Or should we just go with livecopy without the blueprint? But then are we missing out on the sync benefit from the blueprint?
Thanks!!

Hi Chaack,
Thanks for this idea. I have tried this before but couldn't get the livecopy to sync.
I tried to do it through the blueprint by right click and select 'rollout'. But nothing happens. The 'blueprint' tab on the page properties on the livecopy site is grayed out. I think the blueprint I created is not associated with the livecopy and that's why the rollout does not work. If the livecopy was created through 'Create site' then the blueprint is available to choose on step1. But not when you 'create live copy'. Is there anyway to link the blueprint to the livecopy if the livecopy was created through 'create live copy'?
Thanks!!!

ZCI and ADS problem when creating forms in ABAP WEB DYNPRO

Similar Messages

Maybe you are looking for