ZCM 10.3.4 Imaging Driver Updates

Hi,
Does anyone know if there will continue to be imaging driver updates for ZCM 10.3.4 post Sept 2012?
M.

Hughesm,
well of course we'd like you to upgrade! There's always http://www.novell.com/documentation/...a/ba69n4p.html
but eventually you'll come across a problem that requires a new kernel...
Shaun Pond

Similar Messages

Jan 2014 Imaging driver update issues

I upgraded my ZCM Primary server from 11.2.2 to 11.2.4 over the weekend. Today I downloaded the Jan 2014 Imaging Driver update from the 11.2.4 patches page. I downloaded the zenworks11.2.4_MU1_Jan14 that said it was for 11.2.4 and 11.2.4 MU1. I followed the readme.txt file that says to run the imaging_driver_update.bat file. I ran this and I get:
"Applying wrong imagin driver updates........Exiting driver update."
Does anyone have any solutions to get this fixed up? If I go to %zenworks_home%\share\preboot\update and look at the ZUpdate.sig file it shows 112303 for the [zen_client_version] If I go into the ZCC management page and look under the primary server all of the version show correct as being 11.2.4.
Thanks for any information you can give. I also cannot PXE boot at this time as well. It gets through PXE fine and I choose "Start Zenworks Imaging Maintenance" from the Imaging menu screen and then it starts loading but then pops up "cannot connect to Zenworks repository" or something like that. I don't have it right in front of me now.
Thanks for any help.
Andrew
Network Administrator
West York Area School District

Marceldejager,
> Anyone any idea's?
yes - read the screen when you go to the November Update you are redirected to the Monthly Update, sure - but at the top, with a bright yellow background are the words
"You have been automatically redirected to this patch because it supercedes the patch you originally requested. The patch you originally requested is still downloadable, click here to download it instead of this newer patch."
if you click on the link it takes you to the patch you want...
Shaun Pond (now working for ENGL)
newly reminted as a Knowledge Professional

Applying wrong imaging driver updates ....

ZENworks 11.3.2 Windows 2008 R2 SP1
Last night we upgraded from ZENworks 11 SP3 to 11.3.2
Applying Imaging Driver Update Feburary 2015 zenworks11.3.2_FRU1_Feb15.zip results in error message 'Applying wrong imaging driver update'
ZUpdate.sig on primary server where running the update says ZEN_CLIENT_VERSION 112403 - timestamps on certain folders in the tftp directory and in the share\preboot\update folder though indicate that updates did take place at the time of the upgrade.
Also a seconday server shows ZEN_CLIENT_VERSION 113200.
'Assuming' that only the ZUpdate.sig file didn't update on the primary server - would it be safe to manually update the ZEN_CLIENT_VERSION and then run the imaging update?
Thanks.

Sector osh wrote:
>
> ZENworks 11.3.2 Windows 2008 R2 SP1
>
> Last night we upgraded from ZENworks 11 SP3 to 11.3.2
>
> Applying Imaging Driver Update Feburary 2015
> zenworks11.3.2_FRU1_Feb15.zip results in error message 'Applying wrong
> imaging driver update'
>
> ZUpdate.sig on primary server where running the update says
> ZEN_CLIENT_VERSION 112403 - timestamps on certain folders in the tftp
> directory and in the share\preboot\update folder though indicate that
> updates did take place at the time of the upgrade.
>
> Also a seconday server shows ZEN_CLIENT_VERSION 113200.
>
> 'Assuming' that only the ZUpdate.sig file didn't update on the primary
> server - would it be safe to manually update the ZEN_CLIENT_VERSION
> and then run the imaging update?
>
> Thanks.
Before doing so... I would run a ZDC, just to check - could me more
than just this one file...
Niels
I have always liked... Cowabunga!
If you find this post helpful, please show your appreciation by clicking
on the star below.
A member must be logged in before s/he can assign reputation points.

Imaging Drivers update

Hi,
I downloaded Imaging Driver Update for January 2014 and executed the batch
file to apply the update on my ZCM server but I think it doesn't applied.
Batch file was executed very fast, no bakup folder created...
My ZCM server is at 11.2.4. Should I install MU1 before ?
Is January 2014 the latest driver update bundle ?
Thanks.

Shaun,
No log file created by the batch file.
What I do is:
- Download Jan14 driver update
- extract it in a temp folder
- execute the imaging_driver_update.bat file in command line
And then, message displayed that I'm
Applying wrong imaging driver updates .....
Exiting driver update...
No log file created, no backup folder created....
"Shaun Pond" a crit dans le message de groupe de discussion :
[email protected]..
Normand,
the log that's created by the batch file - see the readme for details
Shaun Pond
newly reminted as a Knowledge Professional

January imagin Driver update

Hi Guys,
Just a quick question, we are running 10.3.1 and are in the process of making a new zcm 11 zone to migrate everyone over too. The release notes for the January driver updates only refer to 10.3.2, as I'm moving away from that zone, I really don't want to upgrade it (and have to deal with the associated hassle it always introduces).
So my question is, can I apply the January Imaging Driver update to a 10.3.1 system?
Thanks
Dave

Originally Posted by Cptdave
Thanks Shaun, I'll give it a shot, I just wanted to make sure it wasn't a definite no no.
FYI, we have deployed the Jan update to our 10.3 ZCM without any issues.
Thomas

IPhone 5 pixelated images in various apps problem- occurred within last 2 months and must be a result of apple network driver update

iPhone 5 pixelated images in various apps problem- occurred within last 2 months and must be a result of apple network driver update
What's the fix?
Tried reset, restart, reboot, reopen of apps same problem

What do you mean by reboot? Do you mean restore? Because if you haven't restored, then that's the next step. You'll need a computer with the latest version of iTunes and a USB connector.
For Mac:
http://support.apple.com/kb/PH12124
For PC:
http://support.apple.com/kb/PH12324

ZCM 11.2.3a Jan 2014 driver updates

Hi there
Since applying the Jan 2014 driver updates one of our images downloads and fails to boot.
File \Windows\System32\winload.exe
Stauts 0xc000000f
The image size is 86 Gig.
Does anyone know if there is a image size limit.
Switching back to the previous driver set and there are no problems, but we need to support new hardware so need the Jan 2014 drivers.
Thanks
Mark

Originally Posted by markvh
Hi there
Since applying the Jan 2014 driver updates one of our images downloads and fails to boot.
File \Windows\System32\winload.exe
Stauts 0xc000000f
The image size is 86 Gig.
Does anyone know if there is a image size limit.
Switching back to the previous driver set and there are no problems, but we need to support new hardware so need the Jan 2014 drivers.
Thanks
Mark
Hi Mark,
I know you have an SR open, but I'm also curious if you also applied the latest tntfs.ko driver?
@Anders: is there some more detail to what the symptoms are of that found defect and in which situations it might occur?
Cheers,
Willem

HT3669 Now that the driver update allows my HP printer to scan, why won't it show up in Image Capture?

Now that the driver update allows my HP all-in-one to scan, why won't it show up in Image Capture?

According to IC's help:
If you can’t see your scanner in the list, refer to the documentation that came with your scanner to see how to scan images.
Alternatively, quit IC, reset your AIO in Print&Fax prefPane, relaunch IC, and see if that lists it.

Not able to add driver update during Solaris 10 installation on IBM x3550

I am facing a problem with installation of Solaris 10 on IBM x3550.
My question is not specific to IBM server.
I am trying to add SAS driver during Solaris 10 installation. I selected option "Apply device driver update" (option # 4). It is asking to insert driver disk. But only showing floppy (f) and cdrom (c).
IBM server 3550 doesnt have floppy drive and I have the driver image only in a USB stick. Unfortunately, Solaris 10 installation is not showing usb device during driver installation.
Is there any way we can add usb device to the driver update disk list??
Thanks in advance.

Does no one have an idea?

No HDMI output after driver updates

I have for almost a year succesfully been using my micro HDMI port on my Lenovo Yoga 2 Pro for watching movies via my projector. Today, Driver Booster suggested I update 10 drivers that were outdated. So I did. It included some Intel(R) Dynamic Platform and Thermal Network drivers, an Intel HD Graphics Family driver, Management Engine Interface, a few audio drivers, and afterwards my micro HDMI port is completely dead. The computer doesn't recognize anything when I plug I connect the HDMI cable. Usually the computer screen changes format, but now nothing happens.
I've tried to do an Open System Restore to undo recent changes, and it seems to have undone all the driver updates, but my micro HDMI port still is not working.
Any suggestions?
ps: I'm aware of the issues with the micro HDMI port on the laptop being too recessed -- that is not my problem.

Hi there @eddymath
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having trouble with an HDMI connection, and I am happy to help you with this.
Since you have installed multiple drivers and tried a different operating system disk, I would suggest starting with a System Recovery to the factory image. That is assuming that before you started all of this, you had already made a backup of your important data, so it is safe. A system recovery to the factory image restores the system to how it was out of the box. I am assuming that along the way you did not already remove the existing recovery partitions.
Performing an HP System Recovery (Windows 7)
Troubleshooting HP System Recovery Problems (Windows 7)
Once that is done, and you have done any required updates, let me know if you are still having trouble with the HDMI, and specifics about the symptoms.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Sol 10 driver update issues!

Hey All;
I'm trying to install Solaris 10 1/06 (x86) from DVD onto our HP ProLiant DL585--we have 4 scsi disks, and I've configured the basic raid 5 array in the controller interface.
The problem happens when I try the driver update that's required in order for solaris to see the controller and disks. When we get to the 'select and installation type' menu, I'm picking "5 Apply driver updates", then choosing the floppy w/ the DU image from HP. That seems to go fine, but after it's extracted the driver to the miniroot system, I choose e for end (or maybe f for finished) and it goes straight into the interactive setup--there isn't an option to pick the solaris interactive text.
The problem with that is, the install hangs, and the solaris install manager screen says "failed to start the java VM" etc etc. It openes and interactive shell window, where I can run format and confirm that the disks are recognized now, but I can't seem to get any further. There is a note on the HP driver readme that says to select option 4 (solaris interactive text (console session), but I seem unable to specify the install option after doing the driver update.
Anyone have any advice for me? It's driving me slightly nutty at this point.

Hey All;
I'm trying to install Solaris 10 1/06 (x86) from DVD
onto our HP ProLiant DL585--we have 4 scsi disks, and
I've configured the basic raid 5 array in the
controller interface.
The problem happens when I try the driver update
that's required in order for solaris to see the
controller and disks. When we get to the 'select and
installation type' menu, I'm picking "5 Apply driver
updates", then choosing the floppy w/ the DU image
from HP. That seems to go fine, but after it's
extracted the driver to the miniroot system, I choose
e for end (or maybe f for finished) and it goes
straight into the interactive setup--there isn't an
option to pick the solaris interactive text.
The problem with that is, the install hangs, and the
solaris install manager screen says "failed to start
the java VM" etc etc. It openes and interactive shell
window, where I can run format and confirm that the
disks are recognized now, but I can't seem to get any
further. There is a note on the HP driver readme that
says to select option 4 (solaris interactive text
(console session), but I seem unable to specify the
install option after doing the driver update.
Anyone have any advice for me? It's driving me
slightly nutty at this point.Yes you will not be able to select option 4, it directly boots with option 1.
Now if you want to continue installation with option 4 then, install the drivers, and continue with the installation.
Hit escape when you see the �Proposed Window system configuration for installation� screen.... to go to the �Current or Proposed Window System Configuration� screen. Select �F3� in the �Current or Proposed Window System Configuration� and the install will proceed as a text install.
hope this will help.....

How to uninstall driver update

Previous to and on the day of October 13, I successfully scanned 35mm slides until the Epson driver update 2.18 was installed in the background. While the scanner produces regular images, it no longer scans transparencies. How can I rollback the driver so I can the previously successful older driver?

It may be possible, but you will need to know what files make up the driver software and where they are installed. I'm afraid I can't help you. Now, if you visit Epson you may be able to download the previous driver.

Satellite Pro L300: x3100 and Intel 965 chipset graphics driver update

Has anyone else installed the Intel 7.15.10.1666 driver, dated 26/02/2009 for the Mobile 965 chipset? Here's their web page for getting to the download:
http://www.intel.com/support/graphics/intelgm965/
For some reason unknown to me, Toshiba Satellite Pro L300 doesn't work with the Intel auto driver update (the download with the exe file). Therefore I followed their instructions for a manual install (the download with the zip file).
My laptop is working just fine with this new driver, and there is a definite improvement in the transitions between images when using the Windows presentation option (slideshow).
This new driver also installs 3 graphics programs from Intel:
Hotkeys for display management
System tray access
TV wizard
I used Windows Defender to remove these 3 from programs that automatically load at system startup to keep a fast boot time and not load unnecessary programs into memory. This hasn't caused me any problems.
Why hasn't Toshiba added this to the driver downloads page?

Hi
Thanks for this info mate...
> Why hasn't Toshiba added this to the driver downloads page?
Who knows maybe it has not been checked, approved and tested by Toshiba?
As far as I know every notebook manufacturers test and approve the drivers before they will be released on the driver pages
Maybe it has not been approved...
However, its good news that this driver is working properly.
I will check it too on my notebook.
Cheers

Error: Boot image to update:

Error: Boot image to update:
Microsoft Windows PE (x64)
Add ConfigMgr binaries
Add custom background
Enable Windows PE command line support
Add drivers
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ESB2 SATA RAID Controller
Intel(R) ESB2 SATA AHCI Controller
Intel(R) ESB2 SATA RAID Controller
Intel(R) 4 Series Chipset Processor to I/O Controller - 2E00
Intel(R) 5000X Chipset Memory Controller Hub - 25C0
Intel(R) 5400 Chipset Memory Controller Hub - 4000
Intel(R) 82852/82855 GM/GME/PM/GMV to Processor I/O Controller - 3580
Intel(R) 82855PM Processor to I/O Controller - 3340
Intel(R) 82865G/PE/P/GV/82848P Processor to I/O Controller - 2570
Intel(R) 915G/P/GV/GL/PL/910GE/GL Processor to I/O Controller - 2580
Mobile Intel(R) 915GM/PM/GMS/910GML Express Processor to DRAM Controller - 2590
Intel(R) 945G/GZ/GC/P/PL Processor to I/O Controller - 2770
Mobile Intel(R) 945GM/GU/PM/GMS/940GML/943GML and Intel(R) 945GT Express Processor to DRAM Controller - 27A0
Intel(R) 946GZ/PL/GL Processor to I/O Controller - 2970
Mobile Intel(R) PM965/GM965/GL960/GS965 Express Processor to DRAM Controller - 2A00
High Precision Event Timer
Intel(R) 5100 Chipset Memory Controller Hub - 65C0
Intel(R) 6702PXH PCI Express-to-PCI Bridge A - 032C
Intel(R) E7230/3000/3010 Processor to I/O Controller - 2778
Intel(R) 7300 Chipset Memory Controller Hub - 3600
Intel(R) E7520 Memory Controller Hub - 3590
Intel(R) E8500/E8501 Hub Interface - 2600
Intel(R) 631xESB/6321ESB/3100 Chipset Serial ATA Storage Controller - 2680
Intel(R) 631xESB/6321ESB/3100 Chipset Serial ATA Storage Controller - 2680
Intel(R) 631xESB/6321ESB/3100 Chipset USB Universal Host Controller - 2688
Intel(R) Q35 Express Chipset Processor to I/O Controller - 29B0
Intel(R) 82801EB LPC Interface Controller - 24D0
Intel(R) 82801EB Ultra ATA Storage Controllers
Intel(R) 82801EB Ultra ATA Storage Controllers
Intel(R) 82801EB USB Universal Host Controller - 24D2
Intel(R) 82801FB LPC Interface Controller - 2640
Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
Intel(R) 82801FB Ultra ATA Storage Controllers - 2651
Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
Intel(R) 82801G (ICH7 Family) SMBus Controller - 27DA
Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Intel(R) 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller - 27C0
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8
Intel(R) ICH8 Family Thermal Reporting Device - 284F
Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
Intel(R) ICH8 4 port Serial ATA Storage Controller - 2820
Intel(R) ICH8 Family SMBus Controller - 283E
Intel(R) ICH8 Family USB Universal Host Controller - 2830
Intel(R) ICH9 Family Thermal Subsystem - 2932
Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920
Intel(R) ICH9R/DO/DH 4 port Serial ATA Storage Controller 1 - 2920
Intel(R) ICH9 Family SMBus Controller - 2930
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH10 LPC Interface Controller - 3A10
Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A00
Intel(R) ICH10 Family 4 port Serial ATA Storage Controller 1 - 3A00
Intel(R) ICH10 Family SMBus Controller - 3A30
Intel(R) ICH10 Family USB Universal Host Controller - 3A64
Intel(R) 31154 133MHz PCI TO PCI Bridge - 537C
Intel(R) QuickPath Architecture I/O Hub to ESI Port - 3400
Mobile Intel(R) 45 Express Chipset Series Processor to DRAM Controller - 2A40
Windows Hardware Error Device
Intel(R) 4 Series Chipset Processor to I/O Controller - 2E00
Intel(R) 5000X Chipset Memory Controller Hub - 25C0
Intel(R) 5400 Chipset Memory Controller Hub - 4000
Intel(R) 945G/GZ/GC/P/PL Processor to I/O Controller - 2770
Optional components:
Scripting (WinPE-Scripting)
Startup (WinPE-SecureStartup)
Network (WinPE-WDS-Tools)
Scripting (WinPE-WMI)
Intel(R) QuickPath Architecture System Address Decoder - 2C01 - Failed to inject a ConfigMgr driver into the mounted WIM file
Failed to inject a ConfigMgr driver into the mounted WIM file
The SMS Provider reported an error.: ConfigMgr Error Object:
instance of SMS_ExtendedStatus

Yes as others have said you hardly ever need to inject drivers now into your boot images. There are exceptions to this i.e. Surface Pro USB Ethernet Adapter drivers and some of the newer 2014/2015 Ethernet adapter drivers from Dell and Lenovo. You certainly
don't need to inject all the drivers from a driver folder source as it appears from your post.
If your having problems with no network after you boot into your image just inject the Ethernet drivers only.
If your using WinPE 5 - Use the Windows 8.1 Ethernet Driver (irrespective of what OS your trying to deploy)
If your using WinPE 4 - Use the Windows 7 Ethernet Driver (irrespective of what OS your trying to deploy).
Cheers
Damon

Controller SATA (ASRock P4V88 - Chipset VIA 8237) There's A Driver Update ?

Hy, i'm Davy From Italy, last Year i start using Solaris 10 on a IDE DISK waiting for a Sata Driver for the via 8237 controller (the same of the asrcock 775vt)
Yersterday i try the Solaris-10 8 07 and this Controller is already not-compatible.
there's a Driver UPDATE for this sata Controller? i don't have the Ide-Emulation Option on the asrock bios. and now, in 2007-2008, the non-sata compatibility are very strange..
can anyone suggest a link for the driver?
Thx Davy From Italy

Hi,
Did you try to boot in safe mode?
Restart the computer, press F8 before the Windows logo appears.
If you can enter into safe mode, restart your computer and let Windows start normally.
If you have created a system image or you have a system image installation disc, you can use it to restore your computer. But any changes you've made, programs you've installed, or files you've saved after the system image was created
will likely be lost unless you have a recent backup of your data.
If the methods all not work, you may have to reinstall the windows.
For more information and detail steps, please refer to the following article.
Resolving stop (blue screen) errors in Windows 7
http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7
Hope this helps,
Ada Liu
TechNet Community Support

ZCM 10.3.4 Imaging Driver Updates

Similar Messages

Maybe you are looking for