ZCM 10.3.5?

Hi,
I'm about to upgrade from ZCM 10.3.1 to 10.3.4. Does anyone know if ZCM 10.3.5 is on the horizon?
Mark.

Hughesm,
correct, I hoped that the message was big enough :) Note that General
Support for 10.x ends on September 30 this year...
http://support.novell.com/lifecycle/
Shaun Pond

Similar Messages

Error message When Importing device from ZCM

Hi
I create a ZCM importing setting in the AMIE, when I save the configuration setting...it show successfully, but I clieck import button,it show "A default Service Request team must be set in the preferences prior to running an import"....
I do not know how to set default request team,Who could teach me ?
thanks!!
wyldkao

First, create groups for each process. Then go to [Setup] -> Setup -> Privileges -> Requests and select the defined teams (must be above the Proof Options).
Greetings

ZCM 10 SP3 Beta failed to install properly

We have a test ZCM installation and working towards production. We really need the features added in SP3 beta so I went to install on our test 10.2.1 primary server. Followed the instructions and added the zip file to ZCC and then deployed the update to our only primary server/embedded sybase ZCM box. There is little to nothing built in the database at this time. The primary server is running OES2 SP1 and completely failed to update as I can no longer log in.
After the update I rebooted the server and I launch the ZCC. When I try to log in as administrator I get this error: Login Error: org.hibernate.HibernateException: JDBC Driver class not found: ianywhere.ml.jdbcodbc.IDriver
It looks like some component is updated and looking for a dependency that maybe didn't make it (related to Sybase, the ianywhere piece).
Anyone have any ideas?
ZCC.log states:
08 Dec 2009 14:36:02 ============== Exception (begin) ===========================
08 Dec 2009 14:36:02 Exception occured
com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: org.hibernate.HibernateException: JDBC Driver class not found: ianywhere.ml.jdbcodbc.IDriver
at com.novell.zenworks.datamodel.session.hibernate.Hi bernateInfo._buildInfo(HibernateInfo.java:306)
at com.novell.zenworks.datamodel.session.hibernate.Hi bernateInfo.buildInfo(HibernateInfo.java:126)
at com.novell.zenworks.datamodel.session.hibernate.Hi bernateAbstractSession.getHibernateInfo(HibernateA bstractSession.java:1316)
at com.novell.zenworks.datamodel.session.hibernate.Hi bernateAbstractSession.getHibernateInfo(HibernateA bstractSession.java:1310)
at com.novell.zenworks.datamodel.session.hibernate.Hi bernateAbstractSession._prePasswordValidationIniti alize(HibernateAbstractSession.java:339)
at com.novell.zenworks.datamodel.session.hibernate.Hi bernateAbstractSession.login(HibernateAbstractSess ion.java:288)
at com.novell.zenworks.datamodel.services.DirectServi ceStoreImpl.login(DirectServiceStoreImpl.java:169)
at com.novell.zenworks.fw.web.internal.Login.loginImp l(Login.java:447)
at com.novell.zenworks.fw.web.internal.Login.loginBut ton_Click(Login.java:321)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:592)
at com.novell.web.controls.WebControl.fireEvent(WebCo ntrol.java:1977)
at com.novell.web.controls.WebControl.fireEvent(WebCo ntrol.java:1952)
at com.novell.web.controls.Button.raisePostBackEvent( Button.java:475)
at com.novell.web.controls.Page.raisePostBackEvent(Pa ge.java:885)
at com.novell.web.controls.Page.raisePostBackEvents(P age.java:872)
at com.novell.web.controls.Page.internalProcessReques t(Page.java:584)
at com.novell.web.controls.Page.processRequest(Page.j ava:528)
at com.novell.web.internal.controls.PageTag.doEndTag( PageTag.java:86)
at org.apache.jsp.jsp.fw.internal.Login_jsp._jspServi ce(Login_jsp.java:366)
at org.apache.jasper.runtime.HttpJspBase.service(Http JspBase.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:803)
at org.apache.jasper.servlet.JspServletWrapper.servic e(JspServletWrapper.java:328)
at org.apache.jasper.servlet.JspServlet.serviceJspFil e(JspServlet.java:315)
at org.apache.jasper.servlet.JspServlet.service(JspSe rvlet.java:265)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:803)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.ApplicationDispatcher.inv oke(ApplicationDispatcher.java:691)
at org.apache.catalina.core.ApplicationDispatcher.pro cessRequest(ApplicationDispatcher.java:469)
at org.apache.catalina.core.ApplicationDispatcher.doF orward(ApplicationDispatcher.java:364)
at org.apache.catalina.core.ApplicationDispatcher.for ward(ApplicationDispatcher.java:301)
at com.novell.web.NJWCServlet.serviceImpl(NJWCServlet .java:97)
at com.novell.zenworks.fw.web.internal.ZENworksServle t.service(ZENworksServlet.java:84)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:803)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:188)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:174)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:525)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:108)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1122)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(H ttp11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11 ConnectionHandler.processConnection(Http11BaseProt ocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.process Socket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThr ead.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlR unnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.hibernate.HibernateException: JDBC Driver class not found: ianywhere.ml.jdbcodbc.IDriver
at org.hibernate.connection.C3P0ConnectionProvider.co nfigure(C3P0ConnectionProvider.java:70)
at org.hibernate.connection.ConnectionProviderFactory .newConnectionProvider(ConnectionProviderFactory.j ava:124)
at org.hibernate.connection.ConnectionProviderFactory .newConnectionProvider(ConnectionProviderFactory.j ava:56)
at org.hibernate.cfg.SettingsFactory.createConnection Provider(SettingsFactory.java:385)
at org.hibernate.cfg.SettingsFactory.buildSettings(Se ttingsFactory.java:61)
at org.hibernate.cfg.Configuration.buildSettings(Conf iguration.java:1885)
at org.hibernate.cfg.Configuration.buildSessionFactor y(Configuration.java:1178)
at com.novell.zenworks.datamodel.session.hibernate.Hi bernateInfo._buildInfo(HibernateInfo.java:278)
... 55 more
Caused by: java.lang.ClassNotFoundException: ianywhere.ml.jdbcodbc.IDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java: 200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.j ava:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:3 06)
at java.lang.ClassLoader.loadClass(ClassLoader.java:2 51)
at java.lang.ClassLoader.loadClassInternal(ClassLoade r.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at org.hibernate.util.ReflectHelper.classForName(Refl ectHelper.java:102)
at org.hibernate.connection.C3P0ConnectionProvider.co nfigure(C3P0ConnectionProvider.java:65)
... 62 more
08 Dec 2009 14:36:02
Exception Info:
08 Dec 2009 14:36:02 Class....... com.novell.zenworks.datamodel.exceptions.InternalD ataModelException
08 Dec 2009 14:36:02 Message..... org.hibernate.HibernateException: JDBC Driver class not found: ianywhere.ml.jdbcodbc.IDriver
08 Dec 2009 14:36:02 Logged at... Messages............313
08 Dec 2009 14:36:02 ============== Exception (end) =============================
aTersteEW@ahedmzcm

tersteew,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ZCM and Windows 8

Hi all,
I have ZCm 11.2.3a running nicely with my Windows 7 workstations.
Management is now on the move and wants to deploy Windows 8.1 on our devices.
So far, I have stalled this move as ZCM does not support 8.1, but they want to know when we can expect support for Windows 8.1.
Searching these forums, the guess would be somewhat March 2014, with the release of 11.3.
Can anyone confirm this or give a hint when it is expected?

Originally Posted by spond
ZeleD,
the intention is to offer a patch post-11.3 to support Windows 8.1,
before 11.3.1. I don't have any more definite news than that at the
moment
Shaun Pond
Any news ? Where could we find answer or to look for ? Herre too we are under pressure to "when ?"

ZCM 11 SP3 and Windows 8.1, need clarification...

I dont know if I can't read, but I need som clarification...
When SP3 arrived, there were problems with Win 8.1.
I have customers that have machines, that were upgraded to 8.1 and it have worked with the already installed 11.2.3a -agent, even if its not supported. They deployed ZCM 11.3-agent to this machines that were upgraded to 8.1, and they all crached, never started again. I made tests in my test-environment, same result.
Last week I started to check and found the update "ZENworks 11.3.0a Windows 8.1 Update" (https://www.novell.com/support/kb/doc.php?id=7014805 / http://download.novell.com/Download?...d=0yMdXrTonF8~). Downloaded that yesterday, and was to test it today. Looked for the instructions again today, and now its not availble anymore, Obsolete. I have not deplyed it yet, so that is no problem.
There are since yesterday a new update, "ZCM 11.3.0 WIN8.1 Patch 866736" (http://download.novell.com/Download?...d=OvBLs9qZhrU~).
But in the instructions on this, it talks about it talks about how to update machines already updated. Here the text mentions "11.3.0_WIN8.1". What is that? Is it the now Obsolete "ZENworks 11.3.0a Windows 8.1 Update"? Or machined patched with the standard "Update for ZENworks (11 SP3)", that was created during SP3 install? If reffering to the last, it cant be done because in both my customers production environment and my testenvironment the Win 8.1 machined crached and never came up.
Next two methods in the description describes how to update "Windows 8.1 Update for ZENworks (11 SP3)", if already imported (zman supf "Windows 8.1 Update for ZENworks (11 SP3)" ZCM_11.3.0_WIN8.1_20140404_866736.zip).
But for those who have not imported that, what is the way to go? You cant download "Windows 8.1 Update for ZENworks (11 SP3)" anymore, and the patch seems to be for that one?
What is the way to get Win 8.1 to works with ZCM 11.3?
Can anyone clarify this?
I dont know if this belongs in agent forum or server-forum, but I start here.
/Stefan

CRAIGDWILSON wrote:
> New Versions of those patches are being rolled out.
>
> Normally it happens at the same time, but looks like timing was
> slightly off.
>
>
>
> On 4/30/2014 11:31 AM, Niels Poulsen wrote:
> > stesjo wrote:
> >
> > >
> > > So, at this point, it means that there is no way to get ZCM 11.3
> > > to work with Windows 8.1?
> > >
> > > Old patches removed, and just patches for the removed patches
> > > available?
> > >
> > > One can assume, that there is a reasom why the 8.1 Update is
> > > removed, and made obsolete?
> > > /Stefan
> >
> > ... One would think so, yes. Not sure what's the reason...
> >
Cool :-)
Niels
A true red devil...
If you find this post helpful, please show your appreciation by
clicking on the star below
A member must be logged in before s/he can assign reputation points.

ZCM Version 10.3.3.44626 Does not Run on Windows 7 64 Bit

Hello,
I am trying to get the ZCM client running on a Dell XPS 13 with Windows 7 64 bit installed.
The first problem I have is that the install errors with "The application was unable to start correctly 0xc000007b)" and it refers to ZPA_Iface.exe. But it does install.
The real problem is it doesn't update. If I right-click on the Zen icon in the system tray and click refresh, nothing happens.
Is there anything different that needs to be done with 64bit Windows?
Thanks.

GeorgeCLP,
> Is there anything different that needs to be done with 64bit Windows?
No, but there are different agents for 32 and 64 bit.
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Features in Patch 6.4 missing from ZCM Patch MGMT 11.2.1.0

We are migrating from Novell ZENworks Patch Mgmt v. 6.4.2.1592 to the ZCM v. 11.2.1.0 patching service. I've noticed that there are are few features in the Patch mgmt 6.4 that I don't see in ZCM 11.2.1.0 and want to see if I'm just missing them somehow. I've looked throught the zen11_pm_administration manual and could not find any info on the following:
1) In Patch 6.4 when looking at the vulnerabilities/patches, you could filter by a specific OS in that it would only show patches (for example) for Windows 7 32bit workstations...and those patch results would only display "patched" or "not patched" numbers for that specific OS. In ZCM 11.2 patch mgmt...it appears that it can only filter by Platform: Windows, Vendor: Microsoft. With this filtering it mixes all the XP, Windows 7 32bit, Windows 7 64 bit, and Windows server patches all together. In the patch name field I can put "Windows 7" but it display 32 and 64 bit as well as patches for servers and includes servers in the numbers for "patched vs not patched". I would like to be able to filter the patches to show for example only patches for Windows 7 64bit workstations and have it reflect the workstations with only Windows 7 64 bit as it does in Patch 6.4. We have ZCM servers in our system but are using a different method to patch them. Basically, I currently have to wade throught the patches for Windows 7 (for example)..select the ones I want..and if that patch also is for Server 2008...I have to make sure that after the deployment creation is completed to remove the servers from the deployment. It would be much easier and efficient to be able to filter out the patches for a specific OS and apply those patches to only that specific OS workstations. Any ideas if this is possible under ZCM 11.2.1.0 patching?
2) In Patch 6.4 you could configure a policy for snooze and reboot options. Then when completing the deployment wizard...you could select "Use policies" for these options. Is there a place to configure these presets in ZCM 11.2.1.0 or does one have to manually change them every time a deployment is created?
3)Once a deployment is set to a group of test workstations, in Patch 6.4 I could export the list of worksations in the test deployment to send to the helpdesk in case they received any calls. Is there an option to do this in ZCM? There doesnt seem to be one.
Any info or feedback would be greatly appreciated.
Thank you,

Michaelstump,
is there a reason you posted in the ZCM *10* patch management forum? At
this time, I agree, some things are better with ZCM patch management,
some things are not...
Shaun Pond

How to recover from a lost trust relationship (or zone configuration) between the linux ZCM agent to the Primary Zone server running on the same machine?

I have tried:
zac retr, which fails as it says there is no zone to which this agent
is connected
zac reg, which fails because of error 34 Invalid device authentication
information
zac rereg GUID, which fails because of missing zone (as zac retr)
zac unr, which fails because of the same error.
zac ci shows the correct certificates
almost everything is working except registration refresh and location
refresh.
What to do in this situation?
ZCM 11.2 with latest update (Monthly update 1)
W. Prindl

This was yesterday resolved by NTS - you see the "quick" resolution
time of NTS if you subtract the date of the initial post from the date
of this post - with an absolutely simple trick, which obviously nobody
did know of. The support engineer got it from the developer team.
There is a switch in the
/opt/novell/zenworks/share/tomcat/webapps/zenworks-registration/WEB-INF/
config.xml configuration file, with which you can switch authentication
off for device registration.
You just need to add <Authenticate>false<\Authenticate> into the only
configuration this file contains.
This suppresses the error 34 on device registration and the device gets
registered correctly upon restart of the zenworks suite. After this is
done one can change back the above mentioned file to the original state
and restart the zenworks suite again.
The solution was really easy to deploy - the time till this resolution
was found was IMO too long.
W. Prindl
W_ Prindl wrote:
>I have tried:
>
>zac retr, which fails as it says there is no zone to which this agent
>is connected
>
>zac reg, which fails because of error 34 Invalid device authentication
>information
>
>zac rereg GUID, which fails because of missing zone (as zac retr)
>
>zac unr, which fails because of the same error.
>
>zac ci shows the correct certificates
>
>almost everything is working except registration refresh and location
>refresh.
>
>What to do in this situation?
>
>ZCM 11.2 with latest update (Monthly update 1)

Trying to rebuild ZCM 10.3.1 server after crash

Hi all,
I'm currently trying to help a customer rebuild a ZCM 10.3.1 server (single primary server) used for Asset Management only, after a complete crash.
The situation is, that we have now re-installed both the OS and ZCM 10.3.1 server with same names, IP etc. We have also restored the SQL database and are able to login to ZCC and see all data.
But - the server is permanently running at 100% CPU Utilization, with the ZEN-loader and ZEN-Server as the primary culprit.
Looking in the loader-messages logfile, we found that it is being flooded with thousands and thousands og line with the same message:
[MESSAGELOGGER.Debug] [9/23/11 1:08:52 PM] [] [Loader.InventoryStorerAMModule] [] [InventoryStorerModule: Exception: com.novell.zenworks.datamodel.exceptions.ObjectNot FoundException: 13e17b91e0b14c7074846efd50f2d034] [] []
And we have now realized that this is due to the fact, that our new install of ZCM 10.3.1 and Agent, naturally does not have the same GUID as the original server..
So - the question is then: how do we change the GUID on the new installed ZCM server, so that it will hook up to the original server/device in the database, and just move on as nothing has happened? I believe I have seen a ZMAN command at some point, doing this exact thing?
Additional information about the installation:
Server running on VMWare platform
Windows Server 2008 R2 Standard
Microsoft SQL Server 2005 Express (on same server)
ZCM server 10.3.1 used for Asset Management only (250 devices)
Cheers,
Henrik Holm Nielsen

hhn,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

ZCM 11.2.3a Image upload error [directory does not exist]

We are uploading a number of images to the server.
A lot of these are large images and the workstation has been build as a VMWare workstation.
So far with the exception of one, all have uploaded successfully.
One image is failing to upload when it is about halfway through. The error displayed on the workstation says "Directory not found"
Looking at the novell-pbserv.log I see the following error message related to the image upload.
RWCC unknown compression command code: 0x4000000 (67108864)
RIP2 RWCC faiolure 3, 1851,
Any help /ideas appreciated.
Thanks
Mark

Hi Shaun,
No we are using the the ZCM 11.2 pxe boot files.
Although we have upgraded to ZCM 11.2.3a the image files from 11.2.3.a and the latest October Imaging update are crashing.
I did post on the forums regards this and have a SR open for it. # 10865188291
We are testing an upload of this particular image for the 3rd time. The other images have uploaded without issues.
They have run a defrag on the disk prior to uploading.
Regards
Mark

Error with ZCM 10.3.3 Agent

Hi,
I got this error with 10.3.3 ZCM agent.
Client is XP SP3.
Server is w2K3 64Bits
Full Message:
An error ocurred during a general refresh in module: Registration Module. Error Message: Could not load file or assembly 'Novell.Casa.Client.Auth, Version=1.7.0.0, Culture=neutral, PublicKeyToken=ed0eb71059ea593b' or one of its dependencies. The system cannot find the file specified.
nexpected exception received when refreshing handler Registration Module(GeneralRefresh): Could not load file or assembly 'Novell.Casa.Client.Auth, Version=1.7.0.0, Culture=neutral, PublicKeyToken=ed0eb71059ea593b' or one of its dependencies. The system cannot find the file specified.
Please help.

sl0000,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

Java.lang.NullPointerException within ZPM on ZCM 10.3

I'm trying to resolve a problem with Patch Management after applying the update for ZCM (10.3.0a) to my ZCM 10.2.2 server. I receive the following error when I select any patches in patch management.
java.lang.NullPointerException
at com.patchlink.sapphire.web.pages.vulnerability.UIU til.rebootRequired(UIUtil.java:39)
at com.patchlink.sapphire.web.pages.vulnerability.Vie wVulnerabilityInfoSnapshot.bindGrid(ViewVulnerabil ityInfoSnapshot.java:203)
at com.patchlink.sapphire.web.pages.vulnerability.Vie wVulnerabilityInfoSnapshot.prerender(ViewVulnerabi lityInfoSnapshot.java:150)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2626)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.zenworks.fw.web.internal.layout.Snapsho tTemplate.preRenderRecursiveInternal(SnapshotTempl ate.java:460)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.WebControl.preRenderRecurs iveInternal(WebControl.java:2637)
at com.novell.web.controls.Page.internalProcessReques t(Page.java:599)
at com.novell.web.controls.Page.processRequest(Page.j ava:528)
at com.novell.zenworks.fw.web.internal.layout.Index.p rocessRequest(Index.java:518)
at com.novell.web.internal.controls.PageTag.doEndTag( PageTag.java:86)
at org.apache.jsp.jsp.index_jsp._jspService(index_jsp .java:193)
at org.apache.jasper.runtime.HttpJspBase.service(Http JspBase.java:98)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:803)
at org.apache.jasper.servlet.JspServletWrapper.servic e(JspServletWrapper.java:328)
at org.apache.jasper.servlet.JspServlet.serviceJspFil e(JspServlet.java:315)
at org.apache.jasper.servlet.JspServlet.service(JspSe rvlet.java:265)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:803)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.ApplicationDispatcher.inv oke(ApplicationDispatcher.java:691)
at org.apache.catalina.core.ApplicationDispatcher.pro cessRequest(ApplicationDispatcher.java:469)
at org.apache.catalina.core.ApplicationDispatcher.doF orward(ApplicationDispatcher.java:364)
at org.apache.catalina.core.ApplicationDispatcher.for ward(ApplicationDispatcher.java:301)
at com.novell.web.NJWCServlet.serviceImpl(NJWCServlet .java:97)
at com.novell.zenworks.fw.web.internal.ZENworksServle t.service(ZENworksServlet.java:84)
at javax.servlet.http.HttpServlet.service(HttpServlet .java:803)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:269)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:188)
at com.patchlink.sapphire.web.pages.vulnerability.ses sion.HibernateSessionFilter.doFilter(HibernateSess ionFilter.java:75)
at org.apache.catalina.core.ApplicationFilterChain.in ternalDoFilter(ApplicationFilterChain.java:215)
at org.apache.catalina.core.ApplicationFilterChain.do Filter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invo ke(StandardWrapperValve.java:210)
at org.apache.catalina.core.StandardContextValve.invo ke(StandardContextValve.java:174)
at org.apache.catalina.authenticator.AuthenticatorBas e.invoke(AuthenticatorBase.java:525)
at org.apache.catalina.core.StandardHostValve.invoke( StandardHostValve.java:127)
at org.apache.catalina.valves.ErrorReportValve.invoke (ErrorReportValve.java:117)
at org.apache.catalina.core.StandardEngineValve.invok e(StandardEngineValve.java:108)
at com.novell.zenworks.tomcat.ZENRequestValve.invoke( ZENRequestValve.java:1196)
at org.apache.catalina.connector.CoyoteAdapter.servic e(CoyoteAdapter.java:151)
at org.apache.coyote.http11.Http11Processor.process(H ttp11Processor.java:870)
at org.apache.coyote.http11.Http11BaseProtocol$Http11 ConnectionHandler.processConnection(Http11BaseProt ocol.java:665)
at org.apache.tomcat.util.net.PoolTcpEndpoint.process Socket(PoolTcpEndpoint.java:528)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThr ead.runIt(LeaderFollowerWorkerThread.java:81)
at org.apache.tomcat.util.threads.ThreadPool$ControlR unnable.run(ThreadPool.java:685)
at java.lang.Thread.run(Thread.java:595)
I located the msi installation files in C:\Program Files\Novell\ZENworks\install\downloads\msi and ran the following in an attempt to repair the installation thinking something might be corrupt
novell-zenworks-java-utilities-server-10.3.0.27209
novell-zenworks-java-utilities-langs-server-10.3.0.27209
novell-zenworks-patch-10.3.0.53676
novell-zenworks-patch-langs-client-10.3.0.53702
novell-zenworks-patch-management-agent-10.3.0.31
novell-zenworks-patch-management-server-10.3.0.31
I have also tried to remove the /share/tomcat/work/Catalina/localhost
as mentioned in TID 7000434, but this did not help.
We are running ZCM 10.3 on a Windows Server 2008 (32-bit) server.
If anyone has a suggestion, your help is much appreciated.
Thanks,
Travis

tfahlman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Surveys with ZCM

Hi!
Is there a chance to make a survey to all connected users for a
"electronic inventory" - they should get their inventory presented on a
web site and they had to put in their correct location, room nr, name
etc. Is there a way to get such a survey run with ZCM? I have in mind
that this should be possible, or am i wrong?
best regards,
Holger

Shaun Pond schrieb:
> Holger,
>
> do you mean this? http://www.novell.com/documentation/...a/ba5mfvo.html
>
Hi!
Yes, this is what i ment! And i dont need Asset Management for this,
ZCM10 Standard will do, right?
Holger

Xen DomU Primary server - Upgrade from 10.3.4 to ZCM 11.2.x

I have a ZCM 10.3.4 service running on a XEN SLES11-sp1 paravrtualised DomU.
The ZCM upgrade to 11.2 instructions warn against extracting the ZCM 11.2 iso file and using that as the upgrade source, instead recommending creating a physical DVD and using that as the source.
As I have a vitualised server I assumed it would be easy to mount the iso as a virtual CD for the guest to use and crack on with the install... but after finding the virt-manager 'add a CD/DVD' option didn't
give me the results I was hoping for (a nice shiny CD icon on the desktop of the virtual server and a 'there it is!' moment after opening nautilus...) I attempted to follow the SuSE instructions for attaching
a CD reader Block device. This asks you to attach a device tap:cdrom:/dev/sr0 or file:/path to iso/ zcm112.iso to an unused block device (say xvdb) and then mount the block device to the DomU guest's
file system (/mnt/xvdb... for example).
This is great for accessing the data, but to my eyes accessing the DVD's installation files from a mounted directory on the guest server isn't any different to extracting the CD/DVD and trying to run the
install from the extracted files on a standard physical box.
Does anyone know why extracting the install iso isn't recommended and more importantly how to upgrade ZCM 10.3 running on a XEN virtual server to 11.2?
cheers

ptrask,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Autologin in Windows 7 using ZCM

Hello,
I have a problem concerning the possibility, if ever exists, to make an autologin under a PC Windows 7 using ZCM 10, DLU activated.
I didn't find the similar as it was in Windows XP and the autologin options added in the registry.
In Windows XP :
[HKEY_LOCAL_MACHINE\SOFTWARE\Novell\Login]
"AutoAdminLogon"="1"
"DefaultLocationProfile"="Default"
"DefaultPassword"="firm"
"DefaultUserName"="UserX"
Does anyone could give me some informations how to resolve it with Windows 7 ?
Thanks.

marctavian,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

SLES OES Patching using ZCM - Best Practice?

Have recently updated an underused ZLM 7.3 to ZCM 11 and have started to utilise it to perform patching of SLES 10 SP3 and OES 2.
At present I have a Novell subscription that downloads from novell NU as Patches with
Create Category based Bundle Groups on.
I hadn't at this point got my head around the sandbox but now want to utilise this as I don't want to implement it willy nilly and have patches deployed and installed without testing first.
So first question is whether there is a best practice document for using ZCM 11 for patching SLES 10 and Sles/oes boxes that describes how best to use the sandbox.
Next question is whether sandbox applies to the patches or only monolithic bundles
At the end of the day it would be great to have a best practice document on how to utilise ZCM with change control over keeping SLES10/OES boxes patched up to date

Hello,
updates via ZCM is also a problem for me.
At least i could give a little response from testing.
As stated in the oes2 documentation patches had to be used for updates. At that point i had the problem that the subscription only created a bundle group which included the patches.
The monolithic bundle seems to be an ordinary update (zcm docu states rpm -U ...) and so should not be used for oes2 servers.
I found out that its ok to rename the patch bundle group created by the subscription to fix the patchlist. I use bundle names which include the date to keep updates from sles and oes in sync.
So you should be able to do updates with these bundlegroups without problem but it is not very nice because each patch bundle had its on log report and entry in the bundle list.
So to keep a global view is not very easy.
The other problem is that there is no official documentation neither on the oes2 or the zcm site how to correct update/patch a sles or oes system with zcm (without patchlink).
Hope this will be included soon as all linux satellite server will have the problem that this is the only way to get updates without direkt connection to the internet - at least as far as i can see.

ZCM 10.3.5?

Similar Messages

Maybe you are looking for