ZCM 10.3 Image to USB Hard Drive?

Is it possible to take an image and store it on a locally attached USB Hard Drive formatted for NTFS? I've been reading other forum entries and I see lots about restoring images from an external drive, but not creating one to an external drive.
(I need to get an image from a computer not networked to my Image server)
Thanks much

Rbaker hsl,
> Is it possible to take an image and store it on a locally attached USB
> Hard Drive formatted for NTFS? I've been reading other forum entries
> and I see lots about restoring images from an external drive, but not
> creating one to an external drive.
>
No, you need to format the drive as EXT3 for example.
- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Similar Messages

Imaging from external DVD player or an external usb hard drive

Hey,
At the High School i work at we are running Netware 6.0 SP5 and Zenworks
4.01 ir6. We have Zen Partitions installed on most computers to store a
local image in case the the computer needs to be re-imaged.
However, we have a dilemma. Every now and then a hard drive will go in a
computer.
When we replace the hard drive with a new one, we install the Zen
Partition, do the config and then our last step is to bring down an image.
Unfortunately our only means of dropping down an image is from the network
either through normal imaging or through multicast sessions.
When we drop an image down from the network which takes up network
bandwidth, it causes slow downs on the users computers and they start
complaining. Our network is running at 100mb.
Is there any way possible to image from an external DVD player or an
external usb hard drive when dropping down an image to a new hard drive in
the computer? Currently I have all my Zen Images on the external USB
Maxtor 160gb hard drive and I also have Zen Images burnt to DVD's.
If so, how do I go about doing this and is there documents on doing this?
Thanks!!!

Bpilon,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Rescue and Recovery 4.3 on Win7 doesn't see a backup on external USB hard drive - Model W510

I've run the Rescue and Recovery utility within Windows 7 on two different external USB hard drives thinking that maybe it was a usb drive issue. When I open the R And R utility in expert mode I can see that both backups exist on their respective drives. I planned on updating my hard drive so I made a full hd backup and the R&R startup disc to boot the laptop from. The bios recognizes either external hard drive at boot with no problems. It shows the names and "+" sign next to drives. So I booted the drive at startup off the DVD drive with the R&R startup disc after I was sure that the bios recognized either external drives. Then when I choose a "Full" restore is of course asks me if I want to use hd, cd/dvd, or external usb drive which I choose the later. It then should show me the backup that I created earlier just as it did when I ran the utility from the Win7 environment so I can choose it to restore from. But I get a blank box showing no backups when I run the 4.3 R&R Startup disc. Again if I boot to Win7 and go into the R&R utility I can see the backup on the exact same USB external drive. Then boot off the CD startup recovery disc and it shows NO BACKUP! Help please! I want to shelf my old hard drive "as is" and create the Restore onto the new hard drive but the utility isn't working for me.
Thanks for any help.

Hmmm,
Seems like that _should_ work. Here's a way you might be able to finesse it: go to the advanced R&R menu in Win 7 and create rescue media on your USB drive. It's essentially the same process as creating the CD - it makes the USB drive bootable and puts a copy of R&R there.
There _should_ be an option to "preserve existing data" but be prepared to lose your existing backup and make it again.
Then just boot the external USB drive and see if R&R recognizes a backup image on the same drive from which you booted.
That's the way I usually migrate to new drives. Maybe it will get around your mysterious problem.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can I make an image of a hard drive which I attached trough enclosure to my laptop?

hi,
I like to know if I can make an image of hard drive which I attached trough enclosure to my laptop ? if yes which utility is usefull for this purpose? or if there any third party software for this purpose.
I am thinking also if I clone this extern hard drive wil I get the same result.
my aim is to make an image of this hard drive which is not working and are some deleted data which I want to recover it whith third party data recovery software.
johan
h.david

no !
with ghost application, you can clone your disk, or make a image from another disk or extrac image to disk.
also he support unicast & multicast if you wan't clone to 10-50 New Hard drive from some image.
here some link for Hirens Boot CD
http://www.hirensbootcd.org/hbcd-v106/
first Download this file (iso file) and burn it on cd.
connect your another HDD you wan't and
Boot your comuter from CD, and select Dos Program & Backup, then ghost.
in ghost options select "with USB".
now in the program you can select what you wan't like disk to image or pratition to image & compression type.
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
|

Usb hard drive not loading after security update

usb hard drive not loading after security update
I can't seem to find any other posts about this problem.
I have three external hard rives connect by a USB hub to my iMac.
Problem is that if I turn on the hard drive(s) AFTER start up I get a message that the drive either was not recognized by the OS or that it was ejected unexpectedly.
I get the same issue but not all the time if I turn them on before I boot the iMac.
I used the disk drive utility to "repair" the drives but they always come back as "probably ok".
If I restart the iMac with the drives connected (on), it seems to work but not all the time.
A bit annoying as I am wondering if the drives are OK or not.
I don't always need the drives as they are for backing up images from my camera using Apreture.
This all began after i did the latest security update.
is the update to blame?
mahalo.

Yes, you can still use those instructions to reset the PRAM.
You said that you booted to your install disk and that your primary drive did not show up at the Select a Destination screen? That usually means that the computer is either not recognizing your partition, or it's not recognizing the hard drive itself.
Start with this article and follow all the steps even if you already tried them. I suspect that you'll get to step 4 and you'll end up having to call Applecare. If you haven't done those steps, they're most likely going to make you do them anyway, so you might as well get them done before the call.

C30: Booting from external USB hard drive

I carry my OS on an external portable USB drive, and then make use of whatever hardware is available where I visit.
I recently attempted to boot a Lenovo C30 Thinkstation with this external drive, and was unable to do so. In looking at the BIOS settings, there is no option to boot from USB (other than floppy(?!?) or memory stick).
Is it possible to boot from an external USB hard drive, and if not, why?
jerry

The boot sequence section of our setup menus has been troublesome to say the least (at least through the development phase). There are various reasons why it is the way it is now....from spec requirements to customer requirements. So long story short it really needs to be this way, even though situations like the one you encoutered is inconvenient.
The USB issue is actually done for security reasons. For example, many large customers don't want users to have the ability to just walk up and plug in a USB device and allow the system to detect that and attempt to boot to it right away as it is a risk to their image/security. For this reason, USB devices don't automatically get added to the boot order, and must be added throught he setup menu if needed.

Power for USB Hard Drives?

Does anyone know whether the USB ports on the new Macbooks are capable of powering a USB hard drive such as the Lacie Rugged series (without having to devote the extra USB port to a power cord to power the hard drive)? I'm trying to determine if the new Macbook would be suitable for digital imaging in the field, and would need to be able to devote one USB port to a card reader, and the other USB port to the external hard drive used for working on the images.

Then assuming it is so-designed it should be able to run self-powered. However, not all USB enclosures and bridge cards are designed to be self-powered and may require an external power supply. I'm not familiar with the one you have, but if it does not run from the port without a power supply, then the above is likely the reason why.

Can't see contents of USB hard drive connected to Time Capsule

Hi. I have a USB hard drive connected to my Time Capsule (which I just got today). I just want to use it as a shared drive, so that the users in my home can use it to access common files (media files, stuff like that).
The TC's set up is to enable file sharing with accounts. AirPort Disk Guest Access is not allowed.
When I authenticate as a user via Finder I can see the disk, see that disk space has been used, but can't see the contents. I'm guessing this is because the files that are actually on there belong to some other user.
Is my guess right? Any suggestions as to how we can all use it as a transfer drive?
Col

Fixed it. I connected the USB drive directly to my computer, and dragged the folder into the 'Shared' folder, which Time Capsule had created. The original folder is now visible, which is what I wanted!

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

How to use iPad (4th gen) to edit with iMovie - but using an external source such as a USB stick or external USB hard drive

Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there? How can you do this?

You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

How can I control media with ipad on xtreme usb hard drive

Trying to use usb hard drive off extreme via ipad and iphone as a media server to go on my boat. My aim is to have the express with hard drive to have all my movies and music on it and use ipad, powerbook and iphone to control this through apple tv to my 42 inch LCD tv.
I am pulling my hair out here. Have purchase new Xtreme and plugged in a usb hard drive and think I have set it up properly as I can see and mount the hard drive on my powerbook and play videos etc via wifi (also conected to the internet) . Also when I have the xtreme and drive mounted on my mac I can access and play the media on the xrpess server on ipad via app called quick explorer.
Problem is that it seems to be picking up the xpress usb drive via the powerbook as when I shut down my powerbook I can see the usb drive but it keeps on deniying me the permission even though the passwords are correct.
Does anyone know if there is a correct way of setting this up to work or if there is an app or does apple have a way for their standard players to pickup the usb drive and control the media via iphone or ipad.
VERY FRUSTRATING
TIM

Trying to use usb hard drive off extreme via ipad and iphone as a media server to go on my boat. My aim is to have the express with hard drive to have all my movies and music on it and use ipad, powerbook and iphone to control this through apple tv to my 42 inch LCD tv.
I am pulling my hair out here. Have purchase new Xtreme and plugged in a usb hard drive and think I have set it up properly as I can see and mount the hard drive on my powerbook and play videos etc via wifi (also conected to the internet) . Also when I have the xtreme and drive mounted on my mac I can access and play the media on the xrpess server on ipad via app called quick explorer.
Problem is that it seems to be picking up the xpress usb drive via the powerbook as when I shut down my powerbook I can see the usb drive but it keeps on deniying me the permission even though the passwords are correct.
Does anyone know if there is a correct way of setting this up to work or if there is an app or does apple have a way for their standard players to pickup the usb drive and control the media via iphone or ipad.
VERY FRUSTRATING
TIM

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

How to restore machine using a TM backup on a usb hard drive from older imac to a brand new iMac?

My imac (the one that had a superdrive in it), had a broken superdrive and was sent for repair. Whilst being "repaired" the screen was broken. I now have a brand new imac albeit without a dvd drive. My question is how to I restore my the old TM back up which had been made to an external usb hard drive to the new imac. Help files say that I should not restore from a TM file to a different machine and that I should use migration assistant. Whilst I can see the external usb drive in TM it is not being recognised in Migration assistant when I click on back up from a TM backup on another machine or disk.
Any ideas?
Just noticed that this new machine is running OSX 10.8.4 the broken imac was on mavericks

This is very simple first run Software Update on the new machine and get your machine upgraded to the most recent version of Mountain Lion 10.8.5. Install all other software updates Apple recommends in Software Update. Then care fully read Pondini's guide on using Migration Assistant located at:
http://pondini.org/OSX/MigrateLion.html
Your migrated data will be in a new account, to access it log into the new account.
Also DO NOT repeat DO NOTuse Wi-Fi to migrate data, if your TM backup drive uses USB, then connect it via USB and follow the on-screen instructions as described in Pondini's guide.

External USB hard drive not being recognized

Hello! I'm sure this has been posted before, but excuse my naivety with this sort of thing...
I have a mac mini 10.5.6 (1.83 GHz Intel Core 2 Duo) and I run the Time Machine function to an external usb hard drive. The hard drive worked fine (plugged into the usb port on an older keyboard), but I went out and bought a new aluminum apple keyboard (because they look so cool ^_^ ) - I plugged the external usb drive into the keyboard and it wasn't recognized, so I tried plugging the external drive directly into the mac mini, but it is still not recognized. It is not showing up in Disk Utility or in System Profiler
Help? I'd hate to have to give up this fancy keyboard...
Thank you!
Dr. E

I believe I had my external drive plugged into the (old) keyboard because with the old mac that I had didn't have a free usb port for it - so when I got the mini I just plugged things back in where they were. But I have always had the Time Machine back up to this drive (connected to the keyboard) though it has been slow (another reason I thought the new keyboard was a good idea).
I tried restarting the computer without the alu keyboard plugged in, but same problem of no drive showing up.
Here is what System Profiler has to say about my drive:
USB2.0 Storage Device:
Capacity: 93.16 GB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk1
Product ID: 0x6830
Vendor ID: 0x04b4 (Cypress Semiconductor)
Version: 0.01
Serial Number: DEF107920F07
Speed: Up to 12 Mb/sec
Manufacturer: Cypress Semiconductor
Location ID: 0x3d130000
Current Available (mA): 100
Current Required (mA): 0
Mac OS 9 Drivers: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Not Supported
Volumes:
USB:
Capacity: 92.84 GB
Available: 53.14 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s2
Mount Point: /Volumes/USB
I don't know the brand or model as it has 'always' been in the case that in which it currently resides and I didn't physically buy the thing :\ I do know that no software was installed with the drive as I assumed that when I put all the old info from the original mac to the mini that it was the sort of thing that would carry over.
Sorry I'm not terribly helpful - Thank you!
Dr. E

USB Hard Drives Keep Disconnecting or Not Responding

Hi,
This is a long post - but one that I hope someone can offer advice on.
The Hardware
Mac Pro running OSX 10.8 (but this has happened on all versions of the OS i.e. 10.6/.7 etc)
3 x Internal SATA Hard Drives - All working perfectly.
External Drives:
2 x Western Digital My Book 1TB USB Hard Drives
1 x Seagate 750GB Hard Drive with USB2 connectivity
2 x IcyBox Dual Bay USB2 hard Drive enclosures using JMicron Chipsets - these enclosures have 2 x 1TB Western Digital Green in each (totaling 4 TB across the 2 enclosures).
D-Link 7 Port USB2 Hub
The Problem
- USB Hard Drives connected to the Mac are ejected from the system without notice and at random times AND/OR
- The external hard drive remains mounted, but when trying to write to the drive/partitions, Finder throws an error message up saying the operation cannot be completed - error code -50.
- Time Machine: TM will back up successfully several times, before eventually throwing an error up that it cannot create the folders required on the drive.
- The only way to be able to use the drives again is either remount the drive, or in some case, it is required to completely power the drive down and then reconnect.
Re-creating the problem
I have honestly not found a sure-fire way of replicating the problem. It seems completely random. It happens when I am actually sat at the computer, but it also happens when I am away from the computer.
In the past - my Time Machine hard drive has been one of the Western Digital MyBook drives. I also used the second MyBook for SuperDuper backups (extra redundancy). The 4TB drives in the IcyBox enclosures have been used to backup my ripped movie collection.
Recently however - I decided to have 2 of the 1TB drives in the IcyBox enclosures to be TM and SuperDuper backups. I have however reverted TM back to one of the Western Digital drives, purely for testing purposes. SuperDuper is backing up to one of the 1TB drives in the IcyBox.
I am trying various things to see if I can find the issue, but it is such a random event that it is taking ages to even come close to find a problem. Sometimes the drives will stay active for a few days, sometimes only a few hours, even minutes.
Theories
I have several theories as to why my USB drives continually disconnect.
1. The D-Link USB Hub.
Could connecting the drives through the hub be causing the problem? I don't really see how, unless it is a documented case that D-Link USB hubs do not play nice with OSX? To try and rule this out I have connected the current Time Machine back up drive (Western Digital MyBook) directly to the USB port on the back of the computer. The SuperDuper (IcyBox enclosure) drive is currently connected through the D-Link hub. I have removed all the other drives from the enclosures - so at present I have only 2 external drives connected (1 x 1TB Western Digital MyBook, 1 x 1TB Western Digital Green inside one of the IcyBox dual-bay enclosures - connected through D-Link Hub).
2. JMicron Chipset
I have done a bit of research on the internet and there are a few indications that perhaps JMicron SATA-to-USB controller chipsets found in a lot of external hard drive enclosures (including the dual bay IcyBox external enclosures that I have) do not play nice with OSX. If the JMicron chipsets in the 2 IcyBox enclosures is a problem - would that cause issues with other USB devices on the USB bus off the Mac? (i.e. can the JMicron chipset in the enclosures cause devices such as the WD MyBook drives which I assume use a non-JMicron chipset, to experience similar failures?)
3. Green Hard Drives
As I have said, I have 4 Western Digital Green 1TB hard drives inside the IcyBox Dual Bay Enclosures. Could the fact that these drives are 'Green' be causing a problem? They do go to sleep after x number of minutes, but they do wake up when required. But could on the occasion when I have problems, could this be caused by the 'Green' feature interrupting OSX in waking the drives? Coupled with JMicron chipset, could this be compounding the issue?
Possible Solutions
I am prepared to spend money on replacement drives and/or enclosures etc - but I would hate to spend x amount of money and have the same problem. So I am hoping to get some advice on what drives/enclosures are more than likely to work flawlessly with OSX.
Thanks for reading!

FYI - re: the SuperDuper drive that is in one of the IcyBox enclosures.
I just opened this drive up in Finder. I heard the drive wake up, but when I came to copy a file over (tried various file sizes) - I got the error -50 message.
Here is the info from Console.
31/07/2012 23:35:52.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:52.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.000 kernel[0]: disk4s2: 0xe000c2e4 (UNDEFINED).
31/07/2012 23:35:53.320 fseventsd[55]: disk logger: failed to open output file /Volumes/Data 1/.fseventsd/0000000002478a7f (No such file or directory). mount point /Volumes/Data 1/.fseventsd
31/07/2012 23:35:53.320 fseventsd[55]: disk logger: failed to open output file /Volumes/Data 1/.fseventsd/0000000002478a7f (No such file or directory). mount point /Volumes/Data 1/.fseventsd
Also, while the drive was inaccessible, I tried 'Verify Disk' in Disk Utility - here are the results
Verifying volume “SuperDuper”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Invalid leaf record count
(It should be 2 instead of 1)
Checking volume bitmap.
Checking volume information.
The volume SuperDuper was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk.
Please also note that the all my external hard drives have recently been reformated using GUID part. map and HFS Journaled.

ZCM 10.3 Image to USB Hard Drive?

Similar Messages

Maybe you are looking for