ZCM can not connect to user source - LDAP to eDir
Hello all,
We had some issues with our ZCM 10.3.1.0 server this AM. It looks like it was caused by no space on our /var/opt partition.
I had logged in and manually deleted a large old image file. I then restarted the ZCM server. Everything powers on and works as it should except, my user source can not be contacted.
When I try to login with one of my Admin users, we get the following error:
"An error occurred while connecting to the user source. Please make sure the user source is accessible and try again."
If I login as the Administrator of the Zone, I can see that the connection source is not connecting - unable to read contexts. The weird part is that I can connect through LDAP from other tools to the same source on port 636 - JXplorer works just fine.
We are running ZCM on the same server as its database and I can use the LDAP browser built in to SLES 11 x64 and the same LDAP credentials work just fine.
What else can I be looking at?
I am really new to Linux so any help is appreciated.
Steve D.
Originally Posted by sjdimare
Hello all,
We had some issues with our ZCM 10.3.1.0 server this AM. It looks like it was caused by no space on our /var/opt partition.
I had logged in and manually deleted a large old image file. I then restarted the ZCM server. Everything powers on and works as it should except, my user source can not be contacted.
When I try to login with one of my Admin users, we get the following error:
"An error occurred while connecting to the user source. Please make sure the user source is accessible and try again."
If I login as the Administrator of the Zone, I can see that the connection source is not connecting - unable to read contexts. The weird part is that I can connect through LDAP from other tools to the same source on port 636 - JXplorer works just fine.
We are running ZCM on the same server as its database and I can use the LDAP browser built in to SLES 11 x64 and the same LDAP credentials work just fine.
What else can I be looking at?
I am really new to Linux so any help is appreciated.
Steve D.
Try removing the user source connection in ZCC and re add it.
Thomas
Similar Messages
-
I dowloaded Lion OSX and installed. I downloaded 13 iitems and installed only 12. At the end of the insta;;ation I received a notice thst Safart can not connect to Server. Safari does not work on user where installation was made. It work on other user. All internet connections work including google. If I go into Safari the blue line goes up to end of "http" on adress and freezes. Where do I go from here.:::???
Hi There Linc Davis,
Wow, you are the best.
Yip this is what the website looks like. Great job Linc Davis.
Not surprised that the "Shop" tab is missing. Darn.
Well can you try to access it's "sister" website: astralmusic.com and astralmusicshop.com?
Since you are awesome with the "Flash" can you investigate if this website has a issue withis this "Flash" too?
Please Linc Davis -
Can not connect to iTune Store from 1 user only.
I have 2 user accounts on this computer. one is an admin account it connects fine. The other account will not connect. It says accessing iTune Store but nothing happens. One time it came up with "can not connect error (-50)"
Can anyone help me!Well I got the iTunes store working. Not sure if this will work for you or not.
I logged in with my administrator account, went into System Preferences, selected Accounts, made the user that could not access the iTunes Store an administrator. I then logged in as that user, launched iTunes, and was able to connect to the iTunes Store (though it did seem to take an excessive amount of time the first time it connected). I shutdown iTunes, logged out of that user, went back into preferences, turned off Administrator rights for that user, and turned on any parental controls that were necessary.
I then logged in as the user again and iTunes was able to connect to the iTunes Store.
I was then able to sync his iPod Touch and download the 2.0 update without any problems.
Hope this works for you.
david. -
Can't start server -- Fatal error: Cannot connect to user group ldap server
After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:
<P>
Fatal error: Cannot connect to user group ldap server.
<P>
In addition, the Directory Server access logs will contain the following
entry:
<P>
-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:
<P>
uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot
<P>
If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad -
HFM can not authentificate MSAD users
Hello,
we have an issue on our HFM (9.2.0.3) server. We want to use externall authentification with MSAD. Shared service server is correctly configure for that an it works fine ( it works fine for our Workspace / BI+ server as well).
But, HFM is not able to performe the authentification. After login on hfm web client, you can select the hfm cluster, then select the hfm application and there you get an error :
Could not authenticate the specified user. %0
Show Details:
Error Number:-2147220966
Error Description:
Error Source:
Page On which Error Occurred:/hfm/OpenApp/AppOpen.asp
It works fine for native HFM user, so the issue seems to be related to SS and externall authentification.
Any idea on what's going wrong ?
----------------------- Extract of interopJava.log file from our HFM server ----------------------
10-16 11:57:51 DEBUG Authentication Authentication class initialize [ENTER].
10-16 11:57:51 DEBUG Authentication HubHost: sxofss01.qrs.qsdxcorp.net
10-16 11:57:51 DEBUG Authentication HubPort: 58080
10-16 11:57:51 DEBUG Authentication EnableNestedGroups:true
10-16 11:57:54 DEBUG Authentication Authentication class initialize [EXIT].
10-16 12:00:31 DEBUG Authentication AuthenticateUser [ENTER]
10-16 12:00:31 DEBUG Authentication AuthenticateUserInternal [ENTER]
10-16 12:00:31 DEBUG Authentication AuthenticateUserInternal : CSSException
10-16 12:00:31 DEBUG Authentication Invalid arguments passed in. Please check the arguments.
10-16 12:00:31 ERROR Authentication Invalid arguments passed in. Please check the arguments.
Error Code: -1
com.hyperion.css.CSSIllegalArgumentException: Invalid arguments passed in. Please check the arguments. Error Code: 1
at com.hyperion.css.CSSAPIImpl.authenticate(CSSAPIImpl.java:425)
at com.hyperion.hfm.security.Authentication.AuthenticateUserInternal(Unknown Source)
at com.hyperion.hfm.security.Authentication.AuthenticateUser(Unknown Source)
10-16 12:00:31 DEBUG Authentication AuthenticateUserInternal [EXIT]
10-16 12:00:31 DEBUG Authentication AuthenticateUser [EXIT]
10-16 12:01:03 DEBUG Authentication AuthenticateUser [ENTER]
10-16 12:01:03 DEBUG Authentication AuthenticateUserInternal [ENTER]
10-16 12:01:05 DEBUG Authentication AuthenticateUserInternal : CSSAuthenticationException
10-16 12:01:05 DEBUG Authentication Failed to authenticate user sebastien.mathieu against provider UK
10-16 12:01:05 ERROR Authentication Failed to authenticate user sebastien.mathieu against provider UK
Error Code: 2
com.hyperion.css.CSSAuthenticationException: Failed to authenticate user sebastien.mathieu against provider UK Error Code: 2
at com.hyperion.css.CSSAPIImpl.authenticate(CSSAPIImpl.java:1004)
at com.hyperion.hfm.security.Authentication.AuthenticateUserInternal(Unknown Source)
at com.hyperion.hfm.security.Authentication.AuthenticateUser(Unknown Source)
10-16 12:01:05 DEBUG Authentication AuthenticateUserInternal [EXIT]
10-16 12:01:05 DEBUG Authentication AuthenticateUser [EXIT]Hello again,
what I forgot to mentionned is that currently the HFM box can not connect to our AD server (because of firewall), only the SharedService box can connect.
Do you thing it could be the cause of my problem ?
Does the HFM server need to have direct access to External MSAD and not only SharedService ?
Thanks in advance for your help -
Can not connect to Cerberus FTP Server with PASV
I setup a FTP Server and i can connect from the inside fine but from the outside i can not connect in passive mode. I can in regular ftp or ssh.
Here is the log from filezilla
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
Response: 220-220-Welcome to Cerberus FTP Server
Response: 220 220 Created by Cerberus, LLC
Command: USER test
Response: 331 User test, password please
Command: PASS ***********
Response: 230 Password Ok, User logged in
Command: CLNT FileZilla
Response: 200 Command okay
Command: OPTS UTF8 ON
Response: 220 UTF8 support on
Command: PBSZ 0
Response: 200 PBSZ=0
Command: PROT P
Response: 200 PROT P OK, data channel will be secured
Status: Connected
Status: Retrieving directory listing...
Command: PWD
Response: 257 "/" is the current directory
Command: TYPE I
Response: 200 Type Binary
Command: PASV
Response: 227 Entering Passive Mode (external IP,195,83)
Command: MLSD
Error: Connection timed out
Error: Failed to retrieve directory listing
Result of the command: "show running-config"
: Saved
ASA Version 8.0(4)
interface Vlan1
nameif inside
security-level 100
ip address 192.168.10.10 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group att
ip address pppoe setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring
object-group service RDP tcp
description RDP
port-object eq 3389
object-group service FTP_PASV_Ports tcp
description Passive Ports
port-object range 35000 35999
object-group service FTPS tcp
description FTPS
port-object eq 990
access-list outside_access_in extended permit tcp any any object-group RDP
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any any eq ftp
access-list outside_access_in extended permit tcp any any eq telnet
access-list outside_access_in extended permit tcp any any eq smtp
access-list outside_access_in extended permit tcp any any eq www
access-list outside_access_in extended permit tcp any any eq pop3
access-list outside_access_in extended permit tcp any any eq https
access-list outside_access_in remark passive FTP port range
access-list outside_access_in extended permit tcp any host server object-group FTP_PASV_Ports
access-list outside_access_in extended permit tcp any any eq ssh
access-list outside_access_in extended permit tcp any any object-group FTPS
access-list outside_access_in extended permit tcp any any eq ftp-data
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1492
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface www server www netmask 255.255.255.255
static (inside,outside) tcp interface https server https netmask 255.255.255.255
static (inside,outside) tcp interface smtp server smtp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 server 3389 netmask 255.255.255.255
static (inside,outside) tcp interface pop3 server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface ftp server ftp netmask 255.255.255.255
static (inside,outside) tcp interface ssh server ssh netmask 255.255.255.255
static (inside,outside) tcp interface 990 server 990 netmask 255.255.255.255
static (inside,outside) tcp interface ftp-data server ftp-data netmask 255.255.255.255
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.10.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh 192.168.10.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
vpdn group att request dialout pppoe
vpdn group att localname @static.sbcglobal.net
vpdn group att ppp authentication pap
vpdn username @static.sbcglobal.net password *********
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password rcuFiQnIXLd encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:ecb5356a2f5e680b
: end
I am programing the router with ASDM so if you could tell me what i need to do from the GUI to fix this.Dan,
Looking at the output,
Status: Resolving address of domain.com
Status: Connecting to ExternalIP:990...
Status: Connection established, initializing TLS...
Status: Verifying certificate...
Status: TLS/SSL connection established, waiting for welcome message...
This looks like FTPS which is not supported on the ASA. You can workaround it by trying to connect using Active mode from the outside instead of PSV.
You can find more info here:
https://supportforums.cisco.com/docs/DOC-23206
Mike -
Dear Fellas:
I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
mysql info:
ps -ef | grep mysql
0 66 1 0 11:06AM ?? 0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
74 225 66 0 11:06AM ?? 0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
501 952 947 0 3:52PM ttys000 0:00.00 grep mysql
Please help!!Fascinated and guessing:
Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
Just speculating. -
i have a problem when i try to update or install apps in my ipad, and a message come up says "can not connect to Itunes Store", anyone know why? please advise. however i had update all my detail of payment method.
Settings > General > Reset > Reset Network Settings.
Power cycle the router.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
Having problems with updating Firefox. It keeps on saying can not connect try again later.
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
WPA Can Not Connect???
Where I work we have a linksys wifi 54G system. When I try to connect it will show the network name and ask for the WPA password. The problem is when I put in the password it says it can not connect. I also tried an alpa-numeric key that I was given for the network with the same result. We don't have any kind of IT person just a router that someone brought in. I did get the key and password conformed with others that have no problem with there PC's to connect. They did say though that they were asked to put both in when they connect which does not happen for me. I tried to change the type of security to connect with but the drop down menu does not let me do this. I was hoping to get into the router settings to see if there was something I could change with out luck because of a password on that as well. The person who supplied the router is never around just a part timer so it is not easy to get him to find out anything else with the system. Oh and it shouldn't be any kind of signal issue since the router is set up 10ft away from me with out anything in the line of sight.
your linksys should have the user login and password written under the modem, somewhere near serial number.
if you type in the address on your browser: http://192.168.1.1 (for instance), it will give you login windows.
Just type 192.168.1.1 on user and the password (Password or Admin), it should give you the access unless the guy changed the password.
Once you get inside, you can go to wireless setting and see the actuall password in there.
Even if the guy changed the password, you still can reset that by use a pointy device and push to the reset button next to the power adapter hole.
Sometime you don't need to mess up with your lynksys, just type ssid or connection name correctly and type the "hex" or "alpha numeric".
Some user said thay put $ infront of the sequence number and they connect just fine after that.
Good Luck. -
I CAN GET INTO THE POGO WEB SITE, BUT CAN NOT LOAD THE GAMES. THE GAME WILL CLOSE AND A MESSAGE WILL APPEAR CAN NOT CONNECT TO SERVER. IT GIVE YOU OTHER OPTIONS, COULD BE BEHIND PROXY OR FIREWALL., MAY BE TO BUSY, PLEASE TRY AGAIN. NONE OF THEM SEEM TO BE THE PROBLEM.HELPPPPPPPPPPPPP
Which "new version"? Websites think you are using Firefox 3.0.19, which is no longer supported. Maybe your User Agent is "stuck" on that old version?
http://en.wikipedia.org/wiki/User_Agent
type '''about:config''' in the URL bar and hit Enter <br />
''If you see the warning, you can confirm that you want to access that page.'' <br />
Filter = '''general.useragent.''' <br />
Right-click the preferences that are '''bold''', one line at a time, and select '''''Reset'''''. <br />
Then restart Firefox -
I have downloaded Firefox for the First time, Firefox can not connect to any website (Unable to COnnect), but IE can. I have followed all the directions on the page for firefox can not load when other programs can (Firefox connection settings,IPv6,DNS Prefetching, firewall settings)
== This happened ==
Every time Firefox opened
== I downloaded it for the 1st time ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MSN Optimized;US)http://support.mozilla.com/en-US/kb/Firewalls
http://support.mozilla.com/en-US/kb/Cannot+connect+after+upgrading+Firefox
http://support.mozilla.com/en-US/kb/Error+loading+web+sites
http://kb.mozillazine.org/Error_loading_websites -
Getting message: can not connect to iTunes store
Getting a message when I try to log in to iTunes or app store. Getting message can not connect to iTunes store.
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
When trying to download an app, I get the "can not connect to itunes store" in spite of being signed in. What is blocking this?
You will need to contact iTunes Support, which you can do so via this link and ask them why the message is appearing (we are fellow users on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
HT4623 iPad. Can not connect to iTunes Store when wishing to download App ?
Recent problems with downloading Apps and updating of software. Message labels read respectively -
"Can not connect with iTunes Store"
"Unable to check software update due to error"
Have I missed something obvious?The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom
Maybe you are looking for
-
Retreive data from wa structure into fields.
Hi friends, I am having a query regarding classical report.I want to retreive data for vendor billwise realisation report.I am getting few fields into my list screen(fields from bsis table).Remaining fields i want to retreive from table b
-
Pages Per Second, User Modes
What is being recorded in the Pages per second metrics, is it: 1) The DOWNLOAD and (emulated) RENDERING of the page with its attributes/objects (pages, images, frames etc) OR 2) Just the DOWNLOAD of the page with its attributes/objects. Does this cha
-
Plugin-container.exe from firefox sometimes uses up to 95% of my computer resources and needs to be manually shut down by way of task manager or in the last resort of a manual log-off/hard reset (pushing the power button) At this rate NO browser will
-
Will Elements run on Vista x64? If so, is there a 64bit version?
-
i have set up my macbook to respond to pre-programmed commands and to do text to speech but is there any way of doing it so that it writes what you say straight into textedit? can any one help? thanks xheadman