ZCM Version 10.3.3.44626 Does not Run on Windows 7 64 Bit

Hello,
I am trying to get the ZCM client running on a Dell XPS 13 with Windows 7 64 bit installed.
The first problem I have is that the install errors with "The application was unable to start correctly 0xc000007b)" and it refers to ZPA_Iface.exe. But it does install.
The real problem is it doesn't update. If I right-click on the Zen icon in the system tray and click refresh, nothing happens.
Is there anything different that needs to be done with 64bit Windows?
Thanks.

GeorgeCLP,
> Is there anything different that needs to be done with 64bit Windows?
No, but there are different agents for 32 and 64 bit.
Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Have an idea for a product enhancement? Please visit:
http://www.novell.com/rms

Similar Messages

I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

My JavaApplets does not run in WINDOWS XP

Java Applets do not run in windows xp internet explorer. Even I have downloaded and installed the latest version of JVM from Sun site but it does not work. Please help me in getting rid of this probelm.

do you get an error message? what happens?

HD Writer AE 1.0 does not run on 64-bit Windows 7

I attempted to install the HD Writer AE 1.0 software from the CD provided with my Panasonic HDC-HS250 Camcorder and got message advising that the application does not support 64-bit Operating System.
I downloaded a version of the software from the Panasonic site that claims to be "compatible with Windows 7 editions" but when I try to run this setup file I also get a message advising incompatability with my operating system (Windows 7 64-bit).
The link to the setup file I downloaded is here :
http://panasonic.jp/support/global/cs/soft/download/hdw_ae10ee_w7.html
How can I get software that will let me work with my Camcorder files on my PC?
Hope you can help me with this ?
Thanks,
Liam

I have had some success at last. I ignored the warning that HD Writer does not support 64-bit operating system and clicked YES to install anyway. It seems to work fairly well. I got errors transferring some movie folders, but just re-tried the ones that failed to load and eventually got them all transferred to my PC.
However, I doubt that I am running software that was written for Windows 7 64-bit and I suspect that my installation is sub-optimal at best, or that I may experience other glitches in future.
Is there better software that would work with my Panasonic HDC-H250 Camcorder and Windows 7 64-bit?

Weblogic Startup Class does not run as Windows Service

If you know the answer, plase send me an email at [email protected]
I'm running a weblogic startup class that starts a Thread. I need to
run a batch program that should be running as long as WebLogic is
running (to process new orders).
It works fine when I run WebLogic (5.1 SP8) from a script, but causes
problem when I'm running it as a Windows Service. It calls the
startup class, however, the startup class never spawns the Thread
class.
Following is excerpts from different components:
=============================================================
*** weblogic.properties ***
weblogic.system.startupClass.pdfCreatorStart=WebLogicStartupPdfCreator
*** WebLogicStartupPdfCreator.java ***
public class WebLogicStartupPdfCreator implements T3StartupDef {
public String startup(String name, Hashtable args) throws
Exception {
Thread t = new ProductionPdfBatchRunner();
t.start();
return "success";
*** ProductionPdfBatchRunner.java ***
public class ProductionPdfBatchRunner extends Thread {
public void run() {
try {
//work being done here
this.sleep(30000);
catch (InterruptedException ie) {
catch(Exception e) {
e.printStackTrace();
=============================================================
Thanks for any help

Hi,
Ok. Few suggestions.
1. Can you review the SAP note:
552286 Troubleshooting for the SAP Web Dispatcher
2. When you said: "web dispatcher does not get started ", what error you got ? Can you be more details here ?
3. Please check the trace file dev_webdisp" that generated in the work directory. If the log entries is not abvious, increase the trace level to 2 or 3, and reproduce and re-check the trace file.
4. What is the output of the command "sapwebdisp -v"
5. How about sapwebdisp.pfl ? Are those settings correct ?
Hope this helps.
Regards,
Vincent

RCU does not run on Windows XP

I am trying to execute the rcu.bat file on my Windows XP SP2 machine and it does not work. An install screen does not come up, it only opens the directory for my Oracle Home installation and does nothing else!! How do I get this to work???
Thanks so much!

Pl provide details of what exactly you are installing. This forum is meant for issues related to database installs. If you are installing SOA Suite, pl post in the SOA forums at http://forums.oracle.com/forums/category.jspa?categoryID=194
Pl see if this blog post can help - http://blogs.oracle.com/SOA/2009/08/installing_oracle_soa_suite_11.html
HTH
Srini

HP support assistant does not run on Windows 7

HP connection manager reports error message upon startup. Defaults to XP on compatability check.
Does HP Advisor run on windows 7?

Here is the latest version of HP Support assistant that is compatible with Windows 7:
ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68201.exe
Here is the link to Windows 7 compatible HP Advisor:
ftp://ftp.hp.com/pub/softlib/software11/COL34630/pv-85800-1/sp46210.exe
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

[CS4 Server Win]: Plugin does not run on Windows Server 2003?

Hi,
can anybody help?
My plugin is running on Windows XP and Windows Vista.
On both operation systems the scripting methods are visible in ExtendScript Toolkit and can be called by javascript.
On Windows Server 2003 my plugin is not running, the scripting methods are not visible in ExtendScript Toolkit!
What is missing?
Thanks,
Alois Blaimer

> I am using Visual Studio 2008 with the VC++ 9.0 compiler.
> Could this be a problem?
Yes.
CS4: use VC2005 + SP1
CS3: use VC2005 without SP1
CS2: use VC2003
In my previous post I described one of the problems I found out the hard way - walking around in disassembler is a pain, even more Intel and Windows, comparing to Mac, and PowerPC. Since then I only use the official tools even if others tell it worked for them, and I keep the InDesign installations for final build and test on the earliest supported operating system.
Dirk

My early version of Lightroom does not run in Windows 8. [was:lightroom]

I have a new laptop which runs windows 8 and my early version of lightroom does n't run

Hi,
Thanks for replying and sorry I’m not too much into this. It doesn’t say which version but I assume its the first as I bought it in 2007 saying its made in Ireland. Number on the disc is 90062864 1/07. I hope that might help, if this isn’t Windows 8 compatible can it get an upgrade?
Regards
Jim
Sent from Windows Mail

32-bit executable does not run in Windows Server 2008

Hi,
Sorry if this question has been asked already. I am having trouble finding a solution in the NI knowledge base and here in the forums.
I just created a simple UI standalone application in Labwindows/CVI with UI. It runs perfectly in XP when it was developed. When I ported this over to the Windows Server 2000 target and tried to run it, it is stuck in a Windows console and will not spawn main(). I tried both rebuilding it on the 64-bit machine as well as just running the exe as is, yielding the same results. I also tried running corflags against the exe on both the 32-bit dev machine and the 64-bit target but both output says "The specified file does no thave a valid managed header", which seems to be true for all CVI exe files.
Through some troubleshooting, I was able to narrow it down to a call to a function in a dll (that apparently has already been working all along). If I comment out the two calls, main() would start and life is good again. I tried visually looking through the code in the project producing the dll and things are fine.
Can someone provide me with some insight into how to proceed on this? Was it a bad build? Did I not configure the build environment correctly (I already tried changing the stack/heap usage)? Could this be caused by a bug in the software that the compiler didn't catch? What typically causes a freeze in the console that spawns main()?
Please help! Thanks in advance!
EDIT: BTW, I'm running LabWindows/CVI 2009 on both machines.

One other possibility is having sufficient rights, especially if you are invoking it via some other app, rather than manually as a logged in user. If you are not logged in and instead invoke it via a web site action, I believe you will have problems reading the registry, accessing a desktop, writing to disk, etc.
Sorry I can't be more definitive, but perhaps it will help.
Please post your conclusion, if you find it.
--Ian

Safari does not run at Windows Server 2003

Any page I try to open at Safari, it just crashes (I mean, just closes) without any technical information.
The most intersting fact is that when I go to preferences, just in the appearance tab make Safari close.
And the most important fact is that I use Microsoft Windows Server 2003 R2 en-us. I NEVER was able to use Safari in any 2003 (since first Safari beta). I've tryed Safari in several of my 2003 machines (at least 4 very different ones). I got better in new versions (first Safari ones didn't even openup)
I'v tryed so many things. Rename several folders, like safari.resources, run Microsoft Application Verifier to fool it as Windows XP, startup some services (like themes or Bonjour -- wich I use to disable), no solution at all. My sixt sense tells me that is is anything to do with some graphics rendering conflict, since it closes in the appearance and Safari have a different look from a regular Windows app window.
Bottom line: any help ?

The kinda answer I like: download, copy, mesh, hack. Looks very nice, must work in most cases, but not this time for me. Behavior was exactly the same, running the nightly build.
Just for the records:
Safari prefs in my Windows live happy in:
C:\Documents and Settings\Administrator\Application Data\Apple Computer\Safari
C:\Documents and Settings\Administrator\Local Settings\Application Data\Apple Computer\Safari
These days I installed an Safari in a brand new 2003 and worked nice. Bug 4 x 1 Safari. Bug still winning.
So, it must be some stuff, some little tricky service or software I install in my usual Windows.
Anyway, thank you very much...
If someone have some clue, I'll apreciate

HT4796 migration assistant does not run on windows 8 pro

Migration Assistant did install without any error on my Vaio laptop running Windows 8 pro (Dutch version).
Howerver when started it says there's an (unspecified) error. What am I doing wrong? (Apple NOOB)

You didn't state how old you Win PC was, only that it was running Win 8. From talks with people I know that use Windows they would never upgrade a 4 year old PC to Win 8. Especially if it was already running Win 7.
So I, wrongly, Assumed you had a newer notebook that came with Win 8.
Right Content and Data (Like your PERSONAL files which is what I stated above) is the only thing that can be used on Mac from a Windows PC. No programs or settings can be carried over from a Windows PC to a Mac running OS X.
Good luck and all the best to you.
Eerste neus wrote:
Well, thanks for your reply LowLuster. Although it wasn't helpful, it sure was interesting to hear that you know what content and data resided on my 'new' Sony Vaio. BTW: In my opinion a 4 year old laptop hardly is to be considered 'new'.

AS 3 project swf compiled in flash builder(on mac) does not run on windows 7 machine

Hey there!!
I have a as3 project that I'm building using flash builder 4.5. When I run or debug in FB it's fine, but when I move it to the windows 7 machine its going to live on nothing shows up. Not even the first function or any traces. I have tried to make the project into an air app but when I try to run it, the paths seem to be all messed up. I'm ok with dealing with the path issue later but for now and for testing I need to be able to just grab the swf that FB spits out and test it on the machine. Before you say use the flash ide the other developer uses only fb so if I can get it to work they will have to come to me everytime to compile if they just want to test something.
Thanks
Jorge

ok guys get ready for this one!
there where a couple of issues. yes it did help that i exported the project to the debug folder instead of deploy folder we set up. but it still wasnt 100% right. so, one issue is that our asset swc was huge. we had everything under the sun in there. so, it would not compile correctly. how did i find this out you ask? i tried to run it in just the flash ide and it would compile so i knew something was super wrong. second, at some point somehow some of our text fields in the asset swc where converted to one of those new fangled tlf type text fields. we never added that swc to the compile path. somehow flash builder just ignored that and still built the swf but it mustve been corrupted to begin with.
so the morale of the story keep an eye on your assets!!

NWBC 3.0 PL3 (PL4) does not run on windows 2008 R2 64BIT

Hey,
we installed 5102369_04 which is the NWBC 3.0 PL4 , on a platform patched with the latest windows patches, for windows server 2008 R2 64bit. Gui 720
Result : when the NWBC-icon is clicked, fastly a screen is popped (like starting a program)
But furthermore absolutely nothing happens.
Is NWBC 3.0 supported on windows 2008 R2 ?
thx,
B.

.net framework 3.5 is a feature that comes with windows 2008 R2. But what is different from previous versions it is that the feature has to be initialized.
Now the NWBC is running locally on the server perfectly, but when pushing it to citrix-clients, you cannot maximize the NWBC-window, resulting in the thread below :-((
NWBC 3.0 PL4 and WIndows 2008 R2 Citrix.

ITunes does not run with Windows 8.1

Since I installed windows 8.1 I cannot get into the itunes store. I get the error message iTunes could not connect to the iTunes store an unknown error occurred 0x80090318. Any ideas? I am using a Sony 20" touchscreen computer running Windows 8.1 operating system. I have checked the forum and copied QTMovieWin.dll to C:\Program Files (x86)\iTunes without success. Connecting to the Store is impossible and I can't update iTunes. Can anyone assist me in correcting this problem?

Here is the fix, if you're still having the problem. It's just a copy and paste thing.
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into: C:\Program Files (x86)\iTunes
Just be sure to reboot after you have copied and pasted the file listed above.

ZCM Version 10.3.3.44626 Does not Run on Windows 7 64 Bit

Similar Messages

Maybe you are looking for