ZCM / Windows 7 / GPT drives
Hi there,
We are installing Windows 7 in UEFI mode on machines with 3TB drives.
We had to convert the hard drive to GPT.
Does ZCM agent run on disks with GUID Partition Table (GPT) drives.
The Zenworks agent installs and the device is registered, but once the machine restarts, it is unable to boot.
Without the Zenworks agent install the machine functions normally and is able to boot multiple times.
Thanks
Mark
Partition the Drives at 2GB and 1GB.
This support will not be added until sometime next year.
On 8/9/2012 3:46 AM, vanek wrote:
>
> Please, is there any repair time estimate? I've got a lot of new PCs
> with Intel DH77E (only UEFI). And without ZENworks-dynamic-users can not
> be used for students (Win7/EN/64bit)
>
> F.Vanek, FEE, Czech techical university in Prague
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
Similar Messages
-
Is it possible to bitlocker-encypt a UEFI/GPT drive from which I boot with Windows 7 64-bit ultimate (TPM-motherboard)?
Sure. BL does support GPT.
-
I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC
Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC
It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
Thanks in advance
This question was solved.
View Solution.Hi:
Try this Intel chipset driver...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
If the auto install file doesn't work, download and unzip the second file listed (zip file).
Go to the device manager and click on the smbus controller needing drivers, click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that was created when you unzipped the file.
Make sure the Include Subfolders box is checked and see if the driver installs that way.
For the mouse pointer problem try reinstalling the touchpad drivers. -
I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng
Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng
It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
Thanks in advance
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03\3&11583659&1&FB
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03
PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C
PCI\VEN_8086&DEV_9CA2&CC_0C0500
PCI\VEN_8086&DEV_9CA2&CC_0C05
This question was solved.
View Solution.Hi:
Download and install the Intel chipset driver from the link below.
https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
The second file on the list is the auto install file. -
When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?
It means you need the 64 bit Version of Windows on a USB stick or DVD.
-
Windows 8.1 Driver For MSI 760GM-P21
My Motherboard is MSI 760GM-P21. My Motherboard has build in ATI Radeon 3000 Graphics Adapter. I Want Windows 8.1 Driver For ATI Radeon 3000. Is It possible To Get The Windows 8.1 Driver For ATI Radeon 3000 ?....
Since AMD did not intend to provide Win8.x support for the 760GM chipset thus drivers weren't available.
The final support is Win7. -
Help with CS3 on Windows 7 hard drive.
I have Photoshop CS3 on an XP hard drive. I have a Windows 7 hard drive now and cannot access Photoshop on the other hard drive and it won't let me install in on the new hard drive. Do I need a patch or something? It tells me to uninstall and install again, but it's on the other hard drive and I don't know how to uninstall it there and really need to get this installed again as I need to do a memorial brochure for a friend. Any help will be appreciated. Thank you.
You either have to reconnect the old drive as the C: drive and uninstall, well actually, deauthorize photoshop. then switch drives again.
Or
You can notify Adobe that you have more than 2 computers with photoshop installed (the old drive counts as a computer) you need then to reset your license.
Now I am assuming how photoshop was installed, If you already had 2 drives and installed on the second drive instead of the main drive and something went wrong so you can no longer access it. Thats another story.
Adobe has a cleaner app that can find photoshop and remove all traces of it for you, so you can resinstall it. I never used that app, so I can not give advice on how it works, but I have heard other recommend using it. -
On a MacBook Pro - windows on external drive?
Hi Everyone,
I'm new to Macs. Looking to buy a MacBook Pro 17 inch, and I am wondering if anyone knows if it is possible to load windows on an extermal disk, firewire 800 or E-sata off an express 34 card?
If this isn't possible, can OS X be loaded on external drives?
I'd rather load windows on external drive than OS X.
Thanks,
ChrisYou'll need to repair or replace your SuperDrive as that is the only way Windows can be installed (downloading is what you do with files on the Internet). And it must be the built-in SuperDrive. The external one Apple sells for the MacBook Air and 2012 iMac will not work.
-
recently I have stumbled upon installing 10.7 lion on external drive:
+Playing with partitions is not for the faint of heart. Installing OS X Lion to a USB drive or external hard drive is a safer but likely slower option.+
Q1: Is it possible to do so with windows?
I would like to install windows on external drive and use it only when needed (hardly ever, but sometimes I have to)
virtualization is not fast enough for me :{
I have a MacBook Air and SuperDrive, however when I plug superdrive there is no place for external drive,
Q2: Unless I use some kind of usb hub?
Q3: Will it work? Have anyone tried this?Hi,
OSX could be installed and run from external harddisk for quite some time.
Sadly, Microsoft choosed to not allow Windows to be installed and run from external harddisk.
However, you can find instructions on how-to do this nonetheless on the internet.
A good USB-hub (preferably one that is self-powered and not USB-powered) will let you use both the Superdrive and an external harddisk at the same time.
Regards
Stefan -
Please Wait While Windows Configures Trusted Drive Manager
Sometimes when I get an email with an attachment and try to open it I get a message that says "Please wait while Windows configures Trusted Drive Manager". It is annoying to see this and I'm not sure how to get rid of the message. Thank you for
your help.Thanks for the link. Software that comes with this computer doesn't have the Dell Protection since it is a work computer.
Hi,
Both the error message and the event log were all pointing to Trust Drive Manger.
Consider it happened to certain attachments, I suspected that there might be some feature of those attachment triggered this alert, like file type or something. So could please check what
these attachments had in common.
Meanwhile check if your PC is one of the models below:
Dell
ControlPoint (DCP) Security Manager Versions 1.X installed on:
Latitude 13, E4200, E4300, E5400, E5410, E5500, E5510, E6400 (ATG, XFR), E6410
(ATG), E6500, E6510, XT2, XT2_XFR, Z600
OptiPlex 380, 580, 760, 780, 960, 980, XE
Precision Mobile M2400, M4400, M4500, M6400, M6500
Precision WorkStation T3500, T5500, T7500
Reference to:
this URL -
I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver.I keep having my screen go black and then Win 7 pro gives me this error:
"Display driver NVIDIA Windows Kernel Mode Driver, Version 188.80 stopped responding and successfully recovered."
everything is fine after that.
happens 3 or 4 times a day.
'''doesn't '''seem to be on graphics or flash heavy sites.
driver is up to date and tried reloading driver. -
N73 and windows media player driver
hi everyone,
im having a problem installing the windows media player driver off the disc for the n73 it installs everything else but fails to install that anyone know where i can down load a copy.?
ive got:
pc suite 6.83
windows xp service pack 2
windows media player 11
cheersI have the latest version of Windows Media Player 11. I have the same problem and will try to explain the steps in the best way I can.
I connect the N73 to the laptop using a cable
I select media player and press ok twice.
Found New Hardware box appears and tells me "Windows needs to install driver software for your N73.
I select the recommended option "Locate and install driver software"
After a few moments I am then asked to insert the CD that came with the N73. It doesn't work as it is an old CD with old drivers from last year.
I select I don't have CD option and I get "problems and reports caused by mobile phone" message etc.
I have tried installing the latest CA-52 driver but I cannot install since I have the latest PC Suite. Windows Media Player is also set up to automatically download licenses required to play and synchronised tracks. -
Need Windows 7 WiFi driver for Compaq nx7010
Were can i get Windows 7 WiFi driver for Compaq nx 7010
Curt try here.
http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=6&Level=5&Conn=4&DownTy...
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress. -
my ipod mini wont install correctly, and be recognised. My boot drive is F: with XP on it. Is there a way to make this work?
PeteIf you can't make Windows the C: drive, try reassigning the iPod's drive letter to something higher in the alphabet:
http://www.kelleytown.com/ikelleytown.htm#DriveLetter -
How do I get Vista to go back to the Windows' Vista generic driver after an Extigy upgrade fiasco
Hello all. First, I'm glad to have the opportunity to be a part of this group. I didn't know it even existed, but here I am...so, let me know what you think.
I am a new Windows Vista Ultimate OS owner, and thus far, I'm absolutely thrilled with the advances in video render and compression speeds. However, one of the auto-update features tried to update my Extigy driver, the one that apparently loaded with the original install of Windows Vista, and the update didn't work...go figure. So, now there is no way to use the system restore as it doesn't recognize that there was a change, and I can't get the Extigy to make a peep.
How do I go bakc to the Windows Vista generic driver so I can listem to my voice overs agan?Thanks so much folks... MichaelGo to the device manager, and select the extigy, then properties, then in the driver tab, the 3rd button down
Maybe you are looking for
-
Hi, I do have a requirement to print digital signature in a Quote, the signature is been stored as a picture (longraw datatype per_images table) in HRMS Tables HRMS Responsibility -> people -> Enter and Maintain -> Picture, here we will upload the si
-
Email submit button doesn't work with Thunderbird
I created a LiveCycle (v8.2.1) form with the email submit button. Works fine if the sender is using Outlook. If their using Thunderbird, it does not. I installed Thunderbird on my system (normally I use Outlook) and set Control Panel/Internet Options
-
How do I burn itunes to an audio cd? I don't see any options to burn in my itunes.
Hi I purchased a song thinking I could just burn an audio cd but all I could do is burn a file through windows media player. Can someone help me please?
-
Material costing problem in import to arrive at batch profitability?
Dear all, Here my client requirement is to arrive at a material profitability with respect to that batch(shipment), but some times in import procurement exact profitability will not be arrive due to practical problems, which are 1. freight & demurrag
-
Depth first in hierarchical query
Does anybody know how to make a depth first run through of a hierarchical query using START WITH ... CONNECT BY PRIOR???