Zebra Printer GK320d is Printing only one label

Hi All,
We are using Printer Zebra GK420d for printing WIP completion label, however All our three zebra gk420d printers stops printing with "printer busy" after the one label print. We've reset the printer and then it'll print first label fine, when we try a second label print it doesn't print again. Once we switch printer off and reset printer, switch printer on again it will print one label. So each and every time we need to print one label, then we must reset printer and on again, it print one label then we have to switch it off and on to print 2nd label. Please help.
Regards

Hi Manu,
Goto SPAD. Select the concerned printer in change mode. Goto its Output Attributes. Under Output request processing you will find several options. There will be a dropdown allowing you to pass number of copies to host spool system. Select that and save. After this check again.
Regards.
Ruchit.

Similar Messages

  • HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.

    pcwizard (HP) requested that I try Foxit Reader 5.1 to see if the printer will print properly.  I used the same previous document and printed it with Foxit Reader 5.1.  The printer printed two copies when only one was requested as it had done in the past.  We still have a problem.
    I am using Windows 7 (64 bit) for OS.  I have experience the issue on two different computers.
    dslledyrt
    This question was solved.
    View Solution.

    Hi dslledyrt,
    Can you install the Basic Driver for the printer on one of the computers, and let me know if you still have this issue?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&...=
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Only One Label is Formatting as Percent in a Pie Chart - Help

    I'm having trouble with a pie chart.  I have only two values in the chart and have added labels.  When I preview the report both labels display correctly.  However, when I right-click the labels in design view and select the #PERCENT option
    from the Series Label Properties and the preview the chart, only one label is actually formatted as a percent. 
     I don't get it? 
    I've followed the steps in other forum questions to get around this but nothing works.  I am in a hurry and really need this to work properly, can someone spell this out for me?
    This is what I see in preview currently:

    Hi Avenue,
    Glad to head that your issue has been solved. Thank you for sharing.
    Regards,
    Charlie Liao
    If you have any feedback on our support, please click
    here.
    Charlie Liao
    TechNet Community Support

  • HP Printer Control app offers only one of the printers on network. How to add a second printer.

    The original "eprint home and biz" recognized both printers on my network.  After upgrade, have lost one printer and see no way to add it.  HELP, please?!?

    Unfortunately the Printer Control app only supports printers manufactured from 2010+ that are ePrint capable. That is why it is not working with your 2710.
    And it looks like the HP ePrint app (formerly the ePrint Home& Biz app) has removed support for some of the older model printers with its most recent update. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • IW38 printing several MO with only one shop paper choice

    Dear Gurus,
    I would like to use the t-code IW38 to print several MO on same time however I would like also to select the shop paper just one time instead many time for each MO.
    If I deselect all document type on t-code OIDG the sap asking me for each order what kind of shop paper I would to select. If I have a lot of MO it becomes tiring.
    So I want to select the list of MO and select the shop paper to be printed only once. Is there anyway to me get it?
    Best regards,
    Wagner Silva

    Hi Wagner
    You can try one thing which is in the default settings, set up the printer settings as follows. Make sure that the Display Dialogue box is not selected. Remove if it is selected!
    The setting can be done for each user by IW32 --> Select any order --> Extras --> Settings --> Deafult Values --> General TAB --> Display Print Dialog Box SHOULD NOT BE SELECTED.
    I hope this will work.
    Cheers
    Savas
    Message was edited by: Savas Yazici

  • Printing to AppleTalk printer via Ethernet

    I’ve read all the pages I could find about this topic, and several threads on this forum, and tried everything suggested but I still can’t get my Mac Mini with OS X 10.7.4 to print to my HP printer.
    My hardware setup is thus: HP LaserJet 6MP is connected by its AppleTalk cable through an AsanteTalk bridge to an Ethernet hub. (There is also a DSL box connected to the same hub). The hub is connected to my Mac Mini via the Ethernet port. This setup worked fine with my old eMac with 10.3.9. The printer was recognized automatically and I did not need to do any special setup, at least with 10.3.9. I understand that Apple dropped support for AppleTalk with Snow Leopard, but is there any possible way to make this work?
    I bought a Mac Mini with OSX 10.7.4, and I have connected the same hub to the Mac Mini via the Ethernet port. The DSL works fine. But I am unable to print. I have read through the following pages and tried everything suggested on these pages:
    http://support.apple.com/kb/HT4670
    http://support.apple.com/kb/HT4507
    http://gigaom.com/apple/how-to-resurrect-your-appletalk-printer-in-snow-leopard/
    What I have done to set up the printer is:
    1) I have downloaded the latest HP drivers and run Software Update today, to verify that all my software is current.
    2) I powered down everything and then powered everything back up starting with the printer, then the hub, then the Mac.
    3) In System Preferences -> Network, I noted that it says “Ethernet is currently active and has the IP address 76.212.150.40” So I am assuming the IP address of the printer is 76.212.150.40 However I'm not sure if I'm correct in assuming that.
    4) I ran Terminal and typed PING 76.212.150.40 and got a series of replies,
    64 bytes from 76.212.150.40: icmp_seq=0 ttl=64 time=0.071 ms and so forth.
    5)I go to System Preferences -> Print & Scan. I click the + to add a printer, then the IP icon. For Protocol I have tried all 3 options, but the last time I chose Line Pinter Daemon - LPD for the protocol, because it’s an old printer.
    6) For the address I put in 76.212.150.40
    7) The “Print using” field came up automatically with Generic PostScript Printer, but I chose Select Printer Software... and chose HP LaserJet 6P/6MP - Postscript.
    8) I click “Add” and I get a warning message, “Unable to verify the printer on your network. It cannot be currently determined if ‘76.212.150.40” supports the Line Printer Daemon Protocol. Would you still like to create the queue?” I click Continue.
    9) The next dialog box asks me to verify my printer’s options (the only one is Total Memory and I set that to “6 Mb or more” because the printer has 7 Mb of memory. I click OK.
    10) The printer shows up in the list of printers. Under it says, “Idle, Last Used.” I print a test page of one sentence, using Tex-Edit Plus. The printer’s status changes to “In use” in printer list. In the Print Queue, it says that it is printing my document, but under that it says “The printer is busy.” And it stays like that.
    I have tried deleting that printer, and adding it again with all the above steps. I have also powered down the whole system and started up again. Now it says, “The printer is not responding.” and if I turn the printer and hub off and then back on again, I am back to “The printer is busy” message.
    Is the problem here that I am trying to still use AppleTalk or LocalTalk? Besides the LocalTalk port, the printer also has 2 parallel ports (a B-type and a C-type) and an infrared port that I have never used. Would a parallel-to-USB cable or adapter solve this?
    Is the problem that the DSL is interfering with the communication between the Mac and the printer? Is the problem with OSX 10.7.4? Or did I make a mistake in the setup process?
    Is there a solution for this or will I have to buy a new printer? The printer still works fine and worked well with 10.3.9. I would hate to just discard the HP LaserJet because it is a workhorse that has printed over 120,000 pages for me and still seems perfectly useable.
    Thanks for any help or suggestions.

    BADD wrote:
    Matt
    You suggested earlier that "The only way you can print to an AppleTalk printer from OS  X 10.6 or later is if the printer is a shared printer running on a Mac running OS X 10.5 or earlier. 
    I am using a Macbook Pro with 10.7.4 and like Bob Weaver, I have tried all of his methods as well. What is the set up as you describe above. I have an old HP laserjet 5m with the Directjet.
    To be absolute about things, I should change that wording to indicate AppleTalk only printers need to be shared from a Mac running OS X 10.5 or earlier.
    You have a JetDirect card that allows for other connections/protocols other than AppleTalk.
    I am trying to use it with my mac using an ethernet cable. I cannot ping it, I cannot see it but my ethernet shows its connected with the green light. The HP is a work horse and I would hate to turn it into a door stop. Iv'e printed the config sheet and have entered the IP address with no luck.
    I cuurently use a Netgear Wireless Router/Modem and have tried using its ethernet ports as well but I continue to have no luck. Can I print to this thing or is it a paperweight
    You appear to be on the right track here, but you appear to need to make some changes to the JetDirect setting to use it on your network.  I have never worked with a JetDirect card, so I cannot give you all the specifics.  Bob Weaver's post will probably be of more help than my outline.  You may also want to search the Apple Discussion boards a bit more -- especially the OS X 10.6 archives.  There were a lot of posts regarding switching over from AppleTalk to network cards.
    The basics are:
    1.  Set the JetDirect card to use a routable address that your router can use.  You can look at the router's configuration to get the expected range of addresses and the gateway address for the router.  You will also need to pay attention to the subnet mask to make sure the two devices are on the same network.
    2.  I generally recommend that you reserve an IP address on the router for the printer.  You will need the JetDirect's MAC address to do this.  The benefits of setting a static IP address for the printer is that you can power down the printer assuming it will hold the set address.  This saves a lot of time and headaches.
    3.  When you configure the printer with the static IP address, subnet mask, and router gateway, be sure to turn off the option for it to get its address using DHCP.  That is, you don't want the printer to get a new address from the router every time you power it up or down.

  • I have to print two labels using single XML file.Error:Only one top level e

    Hi,
    I have to print two labels using single XML file. But its giving error:
    [Error] Error -1072896683 - Line: 38 Pos: 2 Error: Only one top level element is allowed in an XML document.
    Below is my XMl file:
    <?xml version="1.0" encoding="UTF-8" ?>
    <!DOCTYPE labels SYSTEM "label.dtd">
    <labels FORMAT="lib://FRD/PurchasedDoor.btw"  PRINTERNAME="IBM 6700-R80 (300 dpi)" _QUANTITY="1">
    <label>
    <variable name= "Color">AUTUMN</variable>
    <variable name= "Special_Message_Attribute">MSG*</variable>
    <variable name= "Special_Message">This is special Message Label</variable>
    <variable name= "Model"></variable>
    <variable name= "Build_Date">09-APR-12</variable>
    <variable name= "Assy_Cart"></variable>
    <variable name= "Assy_Slot"></variable>
    <variable name= "Finish_Cart"></variable>
    <variable name= "Finish_Slot"></variable>
    <variable name= "Serial_Number">1945.1.1.2-1</variable>
    <variable name= "Serial_Number_Barcode">1945.1.1.2-1</variable>
    <variable name= "Specie">BIRCH</variable>
    <variable name= "Truck_Group"></variable>
    <variable name= "Label_Sequence_No">1</variable>
    <variable name= "WIP_Cart"></variable>
    <variable name= "WIP_Slot"></variable>
    <variable name= "Cabinet_Sequence_No">110</variable>
    <variable name= "JC"></variable>
    <variable name= "Thickness"> </variable>
    <variable name= "Width"> </variable>
    <variable name= "Length"> </variable>
    <variable name= "Overlay"></variable>
    <variable name= "Options">B30</variable>
    <variable name= "Profile_No"></variable>
    <variable name= "Door_Style">NEWBERRY</variable>
    <variable name= "Glaze"></variable>
    <variable name= "Shape"></variable>
    <variable name= "Glass"></variable>
    <variable name= "Hinge_Side"></variable>
    <variable name= "Hinge_Type"></variable>
    <variable name= "EGE"></variable>
    </label>
    <labels FORMAT="lib://FRD/SpecialMessage.btw"  PRINTERNAME="IBM 6700-R80 (300 dpi)" _QUANTITY="1">
    <label>
    <variable name= "Serial_Number">1945.1.1.2-1</variable>
    <variable name= "Special_Message">This is special Message Label</variable>
    <variable name= "Cabinet_Sequence_No">110</variable>
    </label>
    </labels>
    Please suggest.

    >
    XML can only have one root element per file.
    >
    from XML Document: The Root Element

  • How to print the text in only last but one page in sapscripts

    hiiiiiiiiiii,
             explian how to print the text in only last but one page in sapscripts? wher to write the code? plz if possible explain in detail with an example?

    Hello,
    The total no pages is given by &SAPSCRIPT-FORMPAGES& command.
    So u can handle the situation in ur form like this
    /: if &PAGE&  = &SAPSCRIPT-FORMPAGES&
    p1 TEXT
    /: endif
    Try in this way it may help u.
    Regards

  • Fbl5n: The printer provides me only one customer items for each page...

    Hi all,
    launching t.code FBL5N, and printing the repost list, the printer provides me only one customer items for each page...
    I'd like obtaining more customer items for each page...
    What to do?
    Thanks

    Hi Umberto..
    Thats how the standard report works..
    To meet your requirement, you would probably need to look at another standard report.
    In case you need further clarification, please feel free to write to me..
    Good Luck!
    Lucid-Mind...

  • Palm Desktop 6.2.2: Can't print only one category in Month View

    I recently upgraded my palm desktop to 6.2.2 when I got a new PC with windows vista.  When I am in the month view of the calendar and I choose to print, it prints all categories regardless of which category I have selected in the onscreen display.  In my previous version of palm desktop running on windows XP I was able to print only a single category of appointmenets in the month view.  I think of this as a bug.  Is there any way to fix this? 
    Post relates to: Treo 650 (Sprint)

    I have the similar problem.  I have three separate calendars but when I try to print only one, the outcome is that the information in all three calendars gets printed as one.  I cannot find a fix.  HELP.
    Post relates to: Treo 755p (Sprint)

  • How to Print Multiple line items(only the one's that are selected in va22)

    Hello All ,
    My smartform should print the multiple selected line items that i as a user should be able to see as the output .
    In my case i dont have any program that calls the transaction va22
    directly from the transaction VA22 i give the ISSUE OUTPUT TO .
    The Driver program that calls my smartforms fetches the data from table VBAP .
    Two cases that i get because of this fetching logic .
    1. When i try to fetch the data based on only VBELN in the output i get all the items that are in the particular Quotation .
    2 . When i try to fetch data based on VBELN and POSNR in the ouptut when i select multiple items and give print the first item that i i selected is displayed .
    Now what i need is to print only those data that i select in VA22 .
    say if there are items A, B , C, D ,E  in the Quotation .
    and before printing i select A , C , D then only those items should be printed .
    I hope any one  of the Experts  can solve my problem .
    Thanks & Regards
    Faran

    Hi
    I think you will need to do some enhancemwnt for this. What you can do select the lines in table comtrol and before issuing output you need to find a suitable wnhancement place where you can export the selected lines and make the corresponding change in logic for the same?.
    Secondly uou can make a custom report also where user will select lines of po and print..but in this way you will need to many calculations
    Nabheet

  • HP Photosmart all in one C309a printing multiple copies when its set to print only one copy.

    having issues with my C309a its now printing multiple copys when its set to print only one copy.it started doing this 4 days ago and its happening on both my Windows 7 64 bit computer and my Vista 32 computer that both have the latest release drivers already installed need help.HP please sort this issue out.still under warranty do i have to return it? 

    I am using a Motorola SBG900 Wirless Surfboard Gateway - supplied with Bigpond Cable. It is set to be using WPA security and have never had a problem with it before whilst connecting any wireless devices such as a laptop, PDA etc.
    My feeling is that the wireless functionality of this printer needs some serious work before the next release. And furthermore they should never have released it the way it is as it wouldn't pass 5% of user acceptance tests if using wireless. There are too many complaints on this forum and others about similar problems to suggest that I am not by myself here. Dissapointing considering this is the feature that would be at the top of the list of most purchasing this model. It lets down what could of been a vg printer.
    I agree, I think if I want to get this printer working on a wirless network, I will have to set the IP address manually. The problem is the printer refuses to connect to the router now even after it connected a few days ago with no intervention. I have powered down both the router, PC, and printer without any luck yet. I will set the IP address manually first on the printer and see how it goes, then if it connects will see if the PC/router can see the printer during the SW install procedure which has failed >10 times to date.
    For now I think I will stick with Ethernet as it is no doubt much faster anyway and will try the wirless setup again in a few days when my patience grows back. Does anyone know differences in speed between USB/Wireless/Ethernet? I know this is dependant on a number of things but just interested in ball park figures here.

  • Printing only one line record with total of all items through alv

    hi experts,
    i am facing a problem while printing a list through alv.
    requirement is, suppose i have 3 line items under one document no.
    i have to print only one record with total amount of all items.more clearly...
    1001  10  1000/-
    1001  20    234/-
    1001  30   540/- these records in internal table then i am passing it to reuse_alv_grid_display.
    i need to display only 1001  1774/-(means sum of all the items)
    please tell me how to do this.
    thanks in advance,
    manasi

    hi ansari,
    contains in itab
         3000000004     02.11.2000     5550     27.95     27.95     0
         3000000004     02.11.2000     5550     10.95     10.95     0
         3000000005     02.11.2000     5550     27.95     27.95     0
         3000000005     02.11.2000     5550     10.95     10.95     0
         3000000006     02.11.2000     3020     52.99     52.99     0
         3000000006     02.11.2000     3020     64.99     64.99     0
         3000000006     02.11.2000     3020     49.5     49.5     0
         3000000007     02.11.2000     3730     2,228.00     2,228.00     0
         3000000007     02.11.2000     3730     1,698.00     1,698.00     0
         3000000007     02.11.2000     3730     532     532     0
    now please tell me how to print the data
    output will be
    3000000004     02.11.2000     5550     38.90     38.90       0
    3000000005     02.11.2000     5550     38.90     38.90       0
    3000000006     02.11.2000     3020     117.19     117.19     0
    like that
    please help me out
    manasi

  • Printing only one page problem

    Hi,
    I have a printable class that needs to print some text only on 1 page.
    The thing is that when I hit print the printer prints 3 pages:
    page 1 - with correct content
    page 2 - empty page
    page 3 - page with content translated some how
    then the printing stops.
    Here is the code:
    private static final double FACTOR = 2.83;
    private double width, height;
    private void setupJob(){
              // page width and height
              width = 75*FACTOR;
              height = 50*FACTOR;
              job = PrinterJob.getPrinterJob();          
              pf = new PageFormat();
              //PageFormat pf =job.pageDialog(job.defaultPage());
              aset = new HashPrintRequestAttributeSet();
              // Create a letter sized piece of paper with one inch margins
              paper = new Paper();
              // resize the paper and the imageable area
              paper.setSize(width, height);
              paper.setImageableArea(0, 0, width, height);
              // set paper for the pageFormat
              pf.setPaper(paper);
              // set the job printable by calling the painter of this object with the pf pageFormat
              job.setPrintable(this, pf);
              job.setCopies(1);          
              // set the media printable area in mm
              aset.add(new MediaPrintableArea( 0f, 0f, 75f, 50f, MediaPrintableArea.MM));          
              try {
                   job.print(aset);
              } catch (PrinterException e) {
                   e.printStackTrace();
    @Override
         public int print(Graphics g, PageFormat pf, int page)
                   throws PrinterException {     
              if (page > 0) { // We have only one page
                   return NO_SUCH_PAGE;
              }else{          
                   Graphics2D g2d = (Graphics2D)g;
                   // no translation needed
                   // g2d.translate(11.34f, 0);
                   // scale to fit page size
                   double sx = 0, sy = 0;
                   sx = width/(75*4);
                   sy = height/(50*4);
                   double scale = Math.min(sx, sy);
                   g2d.scale(scale,scale);
                   // draw the elements
                   for (int i=0; i<4; i++){
                        texts.drawText(g);
              return PAGE_EXISTS;
    Any help would be appreciated!
    Thanks!                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    Solved myself

  • Leopard printing problems on several printers (Am I the only one?)

    Since installing Leopard shortly after it was released, I've had flakiness with printing:
    - With Tiger, when I printed, I could open the printer's window, and see the print job queued. The job would finish, disappear from the window, and everything would be fine.
    - When the job was printing, the printer icon would appear in the Dock. When the job was done, the icon would disappear from the Dock. Simple.
    With Leopard, printing has worked, but I have never seen a print job appear in a PrinterProxy window. I print, the printer outputs the job, and PrinterProxy is always blank. The printer icon appears in the Dock, and stays there forever. I found that I could ctrl-click on the icon and select the Auto Quit option (Hooray!), but that only worked for a while. Then the icons started staying in the Dock again. When I click on the Dock, there is no more Auto Quit option... just the "Application Not Responding" message. I have to force quit Printer Proxy after every time I print.
    What's stranger is how long it takes for the PrinterProxy app to start up. The icon in the Dock bounces for well over a minute. Sometimes, the job finishes printing before the app is launched. If I switch between apps using Cmd-Tab, I can select the PrinterProxy app, but it never actually displays; instead, I just revert to the current window.
    This is true for every printer I use, and as a traveling consultant, I use several. It is true whether I am printing via Airport, or over a direct Internet or USB connection.
    The printers that are permanently in my Printer List are:
    Canon i9100
    Brother MFC-8840
    Epson Stylus Photo 220
    HP LaserJet 1320N
    HP LaserJet 8800
    HP LaserJet 6570
    HP Color LaserJet 5550
    Adobe PDF 8.0
    All of these have the same problems. What's worse is, when I have a printing problem, there is no way to diagnose it, since the print jobs never show up in the PrinterProxy.
    I have reset my printing system many times. I have deleted and re-added my printers many times. I have downloaded drivers from the manufacturer's sites, and reinstalled Leopard's default drivers. Nothing makes a difference. Strangely, after updating to 10.5.2, the Auto Quit problem went away for awhile, then returned spontaneously.
    At the thread below, I show some of my system and crash logs from a prior discussion. Someone was helping me with the problem, but after asking me to post my logs, he seems to have dropped off the thread.
    http://discussions.apple.com/message.jspa?messageID=7013209#7013209
    I can't believe this problem is endemic to Leopard. I know many people who seem to use Leopard without any problems at all. (They even print once in a while!) And yet, as a fairly advanced user, I can't believe I'm the only one having this problem! My system is pretty plain vanilla, with no weird mods, hacks or apps. Pretty much just straightforward creative and productivity apps. I use it daily for business, so I try to keep all wacky stuff off of it.
    There must be a solution, short of doing a clean install. Can anyone help? Are there PrinterProxy-related files I can delete when I reset the Printer System that might help resolve this? Prefs?
    Thanks,
    David

    I'm having exactly the same problem with a Lexmark C760.
    When I inspect the Activity Monitor while opening the Printer Icon from the Dock (or press the Button "Open Print Queue" in the "Print & Fax" System Preferences), I can see the Printer Icon as "Printer Proxy (Not Responding)" marked in red in the processes list. The Dock icon bounces for quite a while, and after about 2 minutes, a Printer List actually appears under the PrinterProxy application and the process in Activity Monitor changes its name to "(null)" and its color to black.
    Though there is no entry in the PrinterProxy list when I print something from another application while keeping the window open, I can select "Supply Levels" and the correct information appears, so it seems to be functional.
    It also seems that there are several copies of the drivers remaining, as the application in the Dock is named "Lexmark C760 (4)", probably from my attempts to remove and reinstall the driver. Is there some interference with old installations of the drivers that still lurk somewhere, hidden in the depth of the many libraries? How can I get rid of the previously installed drivers for good?

Maybe you are looking for

  • How do I "archive" masses of old emails IN ORDER TO SHRINK MY "PROFILE" SIZE and yet be able to access them possibly in a different profile?

    In order to have quicker "profile" backups... I have emails dating back to 1996, about 15GB, and do not want to delete any of the old email, and, at the same time do not need to look at most of the old email, although I may sometimes do a search for

  • What is new in 2004s BEx ?

    Hello team, Can any explain me  the following .. What is new in 2004s BEx query designer ?? Major differences between old BEx and 2004s BEx. What is report designer and why is it used ? ...... Also  material links if possible ... Thanx in Advance ...

  • Windows 7 XP Mode BIOS set up?

    Anybody using the beta version of Windows XP mode under Windows 7? I got as far as verifying that my processors do in fact allow for "hardware virtualization" but when I attempted to follow instructions to enable this feature, I could only find instr

  • Logical file path creation

    Hi All, In our project we have a requirement to fetch data in to .csv file on application from a report through an APD. I have the complete step by step procedure to create logical file path and logical file name, but i have some doubts as follow 1.

  • Services not work in Firefox

    I find that all the services are dim in firefox (such as speak the selected text.), is it normal. Or my leopard setting has some problem? Thanks a lot.