ZEN 11 Reporting Install Problem

I have downloaded the ZEN11 reporting CD, mounted it and I only see these files:
lxsrv201:/media/ZENworks11 # ls -l
total 0
-r-xr-xr-x 1 root root 0 Dec 31 1969 ?
-r-xr-xr-x 1 root root 0 Dec 31 1969 k?
-r-xr-xr-x 1 root root 0 Dec 31 1969 n
-r-xr-xr-x 1 root root 0 Dec 31 1969 n?
I have ran a checksum on the ISO which good and is 2.6 GB. What could I be doing wrong?
Thanks Much

Hi,
I don't know, but I suspect somethign is wedged up with VMWare Tools. Side step the whole mess and copy the iso image to the Linux system some place, say /iso/zen11.iso, mkdir /mnt/zen11, and use mount -o loop /iso/zen11.iso /mnt/zen11 The othere way is to copy the .iso to the VMWare file system, and in the VM config, connect the iSO to the VM's DVD drive.
-- Bob

Similar Messages

Zen Micro Install Problems -- H

Hello All,
I just got my Zen Micro yesterday and I've been up all night trying to get the thing working so please bear with me.
The problem that I'm having is I install the software from the CD it says that installation is complete but every time I connect the Micro to the computer the found new hardware icon comes up but then the found new hardware wizard runs and wants me to install the software again. I've read hundreds of post regarding this problem and have tried a lot of the suggestions given but still no luck. I've uninstalled and reinstalled the software more times than I can remember right now also with no luck.
Key Points
Firmware version is .02.05
When I connect the Micro there is no docking screen it goes straight to now playing.
It does show up in device manager and when I double click on it the following is displayed:
This device is not configured correctly. (Code )
To reinstall the drivers for this device, click Reinstall Driver
I click on reinstalled driver and again the found new hardware wizard starts I tell I'll fine the driver myself but when I look in the creative folder there is nothing there. I click on the driver tab and it tells me
Driver Provider - Unkonwn
Driver Date - Unavaliable
Driver Version - Not Avaliable
Digital Signer - Not digitally Signed
I click on the details tab and get the following which I have no idea what it means.
USB\VID_04E&PID_4E\00525503908B
I've tried running both WMP 0 and Zen Media explorer and both tell me there is no device connected.
Whew I'm pooped
My only option at this point is to take it back to Circuit City and get another one but I'm affriad the same thing might happen.
Any help would be greatly apreciated.
Thanks.

Hi! Returning it isn't the solution you are right.
First you might want to clean the disk and reboot it. You do that by shutting it off. Take off the battery back slide the battery out then put it back in and hold the on button on for a few seconds and a
reboot screen will come one. has a clean disk, reboot. I would do that first.
If you want to use a download service for music other than napster you need to upgrade your
firmware. I wanted it for real rhapsody so chose the play for sure download. Had a little trouble
getting it to recognize the machine but it did.
You also need to check the device manager. Right click My Computer, left click properties, check
device manager to make sure the Micro is in the USB bus ports with no problem.
If there is a problem you might click on it and make sure the device is enabled.
I love mine now that i've gone through the installation hassles. Great sound easy to use.
Just not easy to get started.

My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

My apple ID was hacked and a game by GodGame Inc was bought and installed. When I try to report a problem about this transaction, the link automatically sends me to the apple store support. The application is bugged. Please help.

thanks for your response roaminggnome. I changed my password immediately after it happened and I have contacted i tunes to let them know of this dillemma.
The I-tunes credit was a promotional thing by Apple to buy their laptop. So I didn't pay for the i-tunes credit in the first place. Do you think my bank will be able to reinburse Itunes credit then? I will ask support when they get back to me.

Zen Reporting Server Issues

Hi All
I need some help with ZRS, this is the first time I've tried it on 2003 sp2 x86 as I'm trying to write install instructions for an on site tech. My primarys are both on vmware and when ZRS failed the first time I upgraded to 10.3.3 and on the secondary server I applied the report-framework.jar, just in case. I got the ZRS install failed after restarting the services, the debug log, says try the configure -c installboe, I tried that and got nothing, it's said press enter to accept default stuff, press enter, immediately back to command line. Installboe.log has nothing. I read the docs about configuring the reports services, go to Programs/Zen Reporting Server and it's empty, this is the 4th time it's like this. Primaries are communicating, login is good during setup, memory is good, no errors during gui pre req check. Netstat shows the 6400 port not allocated or any 64xx ports. I downloaded a new ZRS win iso.
Normally I would run sles, but the site is using 2008 r2 for primaries and want a 2003 for ZRS as that's supported, they want it running as they've paid for asset management and don't know when they can upgrade to 11sp1a.Any help you can give, would be great, as it's getting more than a little tedious and I'm chasing my own tail with the web searches, every different error I come across I search on and nothing distinct to this. Even if I could find something on way the start menu, zrs is empty would be a start.
Cheers
Jon

JonH67,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Creative ZEN Microphoto Harware Problem.

When I include my ZEN Microphoto on the screen appears report "Hardware problem" . I install MP3 Player Recovery Tool, but he does not see - "No supported device connected". In what a problem can be, and how to correct it independently?

fasterfox wrote:
When I include my ZEN Microphoto on the screen appears report "Hardware problem" . I install MP3 Player Recovery Tool, but he does not see - "No supported device connected". In what a problem can be, and how to correct it independently?
Software cannot fix a hardware problem. The hardri've or motherboard is bad in you player.

Report generation problems on the WinNT target machine

I'm using report generation VI's to generate a standard report, mixed with text and graphs.
In development mode (LV 6.0.2; Win-NT 4.0 SP6)there are no problems to print it. As soon as I make an application (application builder 6.0) and transfer it to the target machine (Win-NT 4.0 SP6; run time engine 6.0.2) I get an error -2147352567 unable to load picture..to Append front panel image to report.vi> If I delete the VI "Append front panel image to report.vi", I can print the text of my report without problems. Do you have any idea?

I could fix the bug in the meantime. I had installed an older version of the Internet Explorer. When I updated the target PC to Internet Explorer Vers. 5.5, there are no problems anymore. I think it must be a problem of ActivX.

Report a Problem is not working

Accidentally a 6 years old boy installed a paid game and i want a refund .
i tried to report a problem but when itunes links me with browser to loging so i can report aproblem after i sing in this message appears "The page you're looking for can't be found."
anyone can tell me if there is another way i can do it?
thanks

To report a problem less than 90 days:
http://reportaproblem.apple.com
Sign in with the AppleID and Password used for the purchase.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
To report a problem greater than 90 days:
http://www.apple.com/support/itunes/store
Also, you may want to look at using Restrictions (Parental controls)
iOS Restrictions:
http://support.apple.com/kb/HT4213
iTunes: Parental Controls:
http://support.apple.com/kb/HT1904
Mac App Store Parental Controls:
http://support.apple.com/kb/PH11496
Mac OS X: Parental Controls (video)
http://support.apple.com/kb/VI28

Creative Zen loading music problem

"Creative Zen loading music problem?I just started using a creative zen (DVP-FL000, 6Gb) player and i'm having?a few issues copying music onto it.
I have loaded the latest firmware (.2.03e) onto it and formatted it so was clean when i started loading my music on.
I'm using winamp on winxp to copy my music to the player, but occasionally i get tracks that wont copy to the player. Winamp just shows 'unspecified error'. If a file fails to copy it will never copy, no matter how many times i try. Somtimes its a random track, sometimes an entire album.
So i also tried copying the tracks that wont copy using windows explorer, it appears to copy but the file never appears on the device. The same is also true when i try it on my Windows7 laptop with explorer, it will appear to be copying but then part way through it will report that the device has stopped responding.
It only seems to happen with windows media files, all my mp3s copy fine. The files that dont copy probably represent about 0% of my music but play fine on all my other players.
sorry for the long post, just really scratching my head with this one!
anyone have any ideas?

solved
did a 'clean up' in the recovery menu, no problems transferring tracks since

HT204266 Unable to find "report a problem"

How do I "report a problem", Apple have debited my account although the Upgrade App does not work

Check your Restrictions Settings:
Settings>General>Restrictions
Make sure that "Installing Apps" is toggled to ON

ZEN Agent install without admin rights

Hi all,
Sorry to re-visit something I've seen a number of posts on, but I can't
seem to get things to work as I've been lead to believe they should. We
have a handful of systems that do not have any instance of the ZEN agent
installed, a mix of NT and XP (odd, I know). We are attempting to create
an automated process that will establish whether the agent is on the
system and if it is not, install it. Seems pretty straight forward and
I've been referencing the following suggestions. There are a number of
posts in the forums as well, but these were the most relevant.
http://www.novell.com/coolsolutions/trench/3490.html
http://support.novell.com/cgi-bin/se...?/10085696.htm
http://www.novell.com/coolsolutions/trench/3383.html
http://support.novell.com/cgi-bin/se...?/10073212.htm
The problem is, despite what these instructions say, we cannot install the
agent without having local admin rights. All the batch files are in
place, and work, but ultimately the install fails. I've seen work arounds
for any OS later than NT, but its important that every system have the
agent.
I've tried almost everything suggested in the links above but I am
primarily pursuing the batch file approach as detailed in...
http://support.novell.com/cgi-bin/se...?/10085696.htm
At what point are rights elevated such that the install can complete in an
NT environment?
I am sure I'm forgetting some relevant details, so humor me please.
Thanks in advance.
Mike

I forgot that RunAs does not come with NT. ( It's available as an add-on,
but even that needs admin rights to install.)
Try PSExec from http://www.sysinternals.com, but I believe that will not
work either, but worth a shot.
Another outside shot is to push the "AlwaysInstallElevated" MSI installer
registry keys via a batch file.
Unfortunately, I doubt your logged on user has the rights to do this
either..............
You may be stuck manually visiting and installing manually.
Craig Wilson
Novell Product Support Forum Sysop
Master CNE, MCSE 2003, CCNA
Editor - http://www.ithowto.com
(Seeking Full-Time Expert? Drop me a note :> )
<[email protected]> wrote in message
news:[email protected]...
> There's no domain to work with. The only admin account available is on
> the local PC. I've seen options using Runas or even CPAU.exe but neither
> are available with Windows NT.
>
> We are copying the relevant files to a directory on the PC before
> beginning the install. To this point, network access has not been an
> issue.
>
> The batch file dictates the install run in the background so I don't see
> it happening, but the problem seems to come down to not having
> administrative rights on the PC. If I launch the .MSI manually it gives
> me an error referencing rights. If I'm logged on as an administrator the
> install completes exactly as it should.
>
> Thanks for the reply. I look forward to any suggestions you may have.
>
>
>> There are lots of scripts, but you need to have some ID that is a local
>> admin. ( If the PC is on a Domain, then a Domain Admin account works
>> great.)
>> Additionally, network access may be lost when running this script, so
>> copying the agent local before the install may help.
>>
>> Where do you hit a snag? Starting the install as the alernate user?
>> Finding an Admin account? Determining if the agent is installed?
>>
>> --
>> Craig Wilson
>> Novell Product Support Forum Sysop
>> Master CNE, MCSE 2003, CCNA
>>
>> Editor - http://www.ithowto.com
>>
>> (Seeking Full-Time Expert? Drop me a note :> )
>>
>>
>> <[email protected]> wrote in message
>> news:[email protected]...
>> > Hi all,
>> >
>> > Sorry to re-visit something I've seen a number of posts on, but I can't
>> > seem to get things to work as I've been lead to believe they should.
> We
>> > have a handful of systems that do not have any instance of the ZEN
> agent
>> > installed, a mix of NT and XP (odd, I know). We are attempting to
> create
>> > an automated process that will establish whether the agent is on the
>> > system and if it is not, install it. Seems pretty straight forward and
>> > I've been referencing the following suggestions. There are a number of
>> > posts in the forums as well, but these were the most relevant.
>> >
>> > http://www.novell.com/coolsolutions/trench/3490.html
>> > http://support.novell.com/cgi-bin/se...?/10085696.htm
>> > http://www.novell.com/coolsolutions/trench/3383.html
>> > http://support.novell.com/cgi-bin/se...?/10073212.htm
>> >
>> > The problem is, despite what these instructions say, we cannot install
> the
>> > agent without having local admin rights. All the batch files are in
>> > place, and work, but ultimately the install fails. I've seen work
> arounds
>> > for any OS later than NT, but its important that every system have the
>> > agent.
>> >
>> > I've tried almost everything suggested in the links above but I am
>> > primarily pursuing the batch file approach as detailed in...
>> > http://support.novell.com/cgi-bin/se...?/10085696.htm
>> >
>> > At what point are rights elevated such that the install can complete
> in an
>> > NT environment?
>> >
>> > I am sure I'm forgetting some relevant details, so humor me please.
>> > Thanks in advance.
>> >
>> > Mike
>>
>>
>

Software Metering Report - Install base for all metered software programs - Returns 0

Hi All
I have an issue with one of the software metering reports, Install base for all metered software programs. when run it returns that the metered software is installed on 0 computers.
All usage reports seem to work correctly and I can see usage data for the monitored applications. But anything related to install base such as the one listed above and "Computers that have a metered program installed but have not run the program since
a specific date" either return 0 or are blank.
Any help will be greatly appreciated

Hi All
finally found a fix to the problem. It was very closely related to what Gareth had mentioned regarding Asset Intelligence. The actual method of detecting if a program is installed is done through Software Inventory
Under Custom Client Settings i had enabled Software Inventory on client but never setup any rules to gather data. So i created a new rule for all *.exe files and around an hour later the report started to show up clients.
This blog post also describes the method of setting up software inventory correctly
Thanks to all the help and hopefully this will aid anyone else encountering similar problems

ZCM Reporting install failure: Wrong OS

Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM 10.1.1 x64. But I got the install message: Not supported OS. Is it true ?

I was also "bitten" by this same problem...ZCM 10.1.1 on a 64-bit SLES 10 SP2 server and when I tried to install the ZCM Reporting Server I got the same message.
It was only when I reviewed the fine print, and I do mean fine print, in the software requirements did I realize that NO 64-bit OS was going to be suitable for the ZCM Reporting Server.
Usually you would not expect to run into trouble installing a 32-bit application on a 64-bit OS but they do crop up occasionally but I was not too concerned in the case of ZCM 10.1 on a 64-bit OS about whether or not the ZCM Reporting Server would install OK. Hey, isn't this stuff supposed to work together? What happened to making IT work as one?
This does need to get "fixed" by Novell and BO because it is a problem that should not exist in the ZCM 10 world to begin with. Shame on them for being so lazy about it.
Novell should have pointed this out IN LARGE TYPE THAT THE ZCM 10.1 REPORTING SERVER CANNOT BE INSTALLED ON ANY 64-BIT OS. Instead they kind of tucked it away in the fine print where it waited to bite us.
Tim Wessels
Originally Posted by Craig Wilson
At this point in time, BOE is only supported on a 32-Bit OS.
Novell is working with Business Objects to get support for 64-Bit Platforms.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"deban0" <[email protected]> wrote in message
news:[email protected]...
>
> Hi, I have downloaded the ZCM_Reporting_10.1.0.iso and would install the
> server on my ZCM server what is installed on a SLES 10.2 x64 with ZCM
> 10.1.1 x64. But I got the install message: Not supported OS. Is it true
> ?
>
>
> --
> deban0
> ------------------------------------------------------------------------
> deban0's Profile: NOVELL FORUMS - View Profile: deban0
> View this thread: ZCM Reporting install failure: Wrong OS - NOVELL FORUMS
>

How to report a problem about apple maps?

Apple is getting map data from various places.I saw openstreetmaps is also a map partner for apple.The I installed openstreetmaps on my ipad.it is perfectly fine for Sri Lanka and has directions and roads very clearly....although openstreetmaps is a partner of apple,there is no detailed roads nor directions whatsoever on apple maps.how could this happen...I reported this problem many times using apple maps report problem tab.but it hasn't changed or improved in Sri Lanka.....please report this to apple using your idevices...we want maps in Sri Lanka.

Feedback
http://www.apple.com/feedback

Help! The smurf game did not give me my $25 I tried the "report a problem" it doesn't work! Help! What can I do?

Help! Someone! I can't get help from iTunes anyone else feel
Iike they got robbed? I can't get my $25 offer in the smurf game. I bought a special offer and the game didn't give me my 350 smurfberries,I tried reaching iTunes
But can't I tried the usual means but can't report my problem let alone get my money back! I need help? Anyone else had a similar problem?

Automatic downloads will only work if you turn it on before you download the app.
Are you sure that you are signed into the correct or the same ID on the iPad as you are using in iTunes on your computer. Settings>iTunes and App Stores. Check the signed in ID there.
Do you have any restrictions enabled? Settings>General>Restrictions. Installing if apps can be restricted and you might have content restrictions set as well.

Anyconnect install problem

We are seeing an install problem with the AnyConnect Secure Mobility Client under Windows 7. The installer stalls after a minute or so then reports:
There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected.
There has been no other install issue on these machines and we have reinstalled Windows 7 to insure that the Installer is robust.
Please advise.
D Miller

I am experiencing the same problem, and have tried the following options:
Disabled all HIPS in my local machine and ran the installation with administrator privileges
Tried to install anyconnect-win-3.0.5080-web-deploy-k9.exe from the ASA
Tried to install anyconnect-win-3.0.08057-pre-deploy-k9.msi, because version 3.0.5080 is not available to download from Cisco anymore (version 3.0.08057 is the oldest one that can be downloaded from Cisco)
Tried to install anyconnect-win-3.0.08057-pre-deploy-k9.msi with the NOINSTALLACTIVEX=1 option
Tried to install anyconnect-win-3.0.08057-pre-deploy-k9.msi with the/norestart /quiet /lvx* install-log.txt options
But none of them worked
As a workaround, I manually downloaded anyconnect-win-3.1.04072-pre-deploy-k9.iso from Cisco and the install was successful. However, it seems that not all of the ASAs are configured to allow this version, just older versions
Has anybody found a solution yet?

ZEN 11 Reporting Install Problem

Similar Messages

Maybe you are looking for