Zen 2.0 - Inventory & New Compaq Deskpros

I got Zen 2.0. We recently got a batch of Compaq Deskpro EN's in and I
am
finding that inventory is not working. The last batch of Compaq
Deskpro EN's
we got 4 years ago didnt have problems. Are there any TID's that might
yield
some information regarding this? Just to give you a little more info,
all
the fields
show up, but only a couple actually contain workstation data. The
others
are blank.
In addition, when it does inventory a workstation, it hogs all
available
resources. This
is turns forces the end user to Ctrl + Alt + Del it.

I loaded the Compaq DMI and attempted to scan the workstation. I
checked the
contents of Zeninv.log. Towards the bottom all it mentions was
Zeninv.nlm
was loaded. Nothing else. It tied up the system almost immediately so
I end
tasked it after a half minute.
"Brian" <[email protected]> wrote in message
news:nYHFa.8773$[email protected]..
> My organization re-imaged the new computers before they got to me.
It
> appears DMI was not in the image. I am not to go about deploying DMI
until
a
> test computer can sucessfully and in a quick reasonable span of time
report
> back to the server. We'll see what happens.
>
> "Brian" <[email protected]> wrote in message
> news:e9uFa.8113$[email protected]..
> > I'll check it out tommorrow and report back. I'll also check with
HP
> > (Compaq) to see if the computers have the DMI and WMI. Thanks.
> >
> > "Jared L Jennings" <[email protected]> wrote in
message
> > news:astFa.8091$[email protected]..
> > > I haven't been able to find one.
> > > The inventory process talks with DMI and WMI, which a lot of
times is
> > > provided by the manufactor. Some company's provide software for
this.
> > >
> > > Check in
> > > SYS:ETC\ZENINV.LOG file
> > > Does it report any errors?
> > >
> > > Have you tried unregistering the computer and registering it?
> > >
> > > --
> > > Jared L Jennings
> > > Novell Support Forums SysOp
> > > Using XanaNews 1.15.2.6
> > > Geek by nature, NetWare by choice.
> >
> >
>
>

Similar Messages

Compaq Deskpro DP P650

Hi everyone!
I have a very old board named as Compaq Deskpro DP P650 with Pentium 650MHz.
Info from stickers: MotherBoard 175367-001 S/N:[Personal Information Removed]
I can't find any motherboard manuals for it.
I need to know parameters of DIP-switcher on motherboard
I want install more new processor and more large capacity of RAM
Who can help me?

@FLezOR
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Solaris 8 4/01 Install Problem on Compaq Deskpro

Howdy,
I am trying to install Solaris 8 4/01 on a Compaq Deskpro 6000 but I am having a problem at the reboot phase. The instructions indicate that I need to eject the Install CD after the system resets and before the memory test/HW detection phase. My question is, how do I know when this occurs...there is no screen output to tell me when this is happening. Also, The system seems to hang on reboot on a Compaq Logo screen with the hourglass just sitting there doing nothing.
Any help would be greatly appreciated.
Thanks
Dennis

Dennis,
The installation program should tell you when it is going to restart the system. You will be asked to 'press any key/enter to continue."
Immediately when your system is restarted, remove any CDs from your drives.
If your system is hanging while it is showing the Compaq logo, trying pressing the 'ESC' key so that you can see what is actually going on.
I hope this helps.
Allen
Sun Developer Support

I buy a new compaq presario cq57 408tu but its bluetooth and wifi not working even installing driver

i buy a new compaq presario cq57 408tu laptop , but its bluetooth and wifi not working even installing all driver

Hey there. You didnt state what operating system you are using but I was able to find two articles that should help resolve your issue.
Troubleshooting Your Wireless Network and Internet Connection (Windows 7)
Fixing Bluetooth Issues
These articles will go through all the basic troubleshooting steps. Let me know if this helps resolve the issue at all.
Thanks!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Audio volume problems on new Compaq 610 notebook

Just bought a new Compaq 610 Notebook installed with XP Pro. Installed Vista, then re-installed XP Pro..
Everything is fine except the audio. It is barely audible, despite setting all controlls to max loud. External speakers also barely audible.
Device manager indicates all audio devices working OK.
Would like some suggestions.
ExPreacherMan

I have two new Compaq 610 notebook with same problem. When i play a movie from a DVD disc, the video is stuttering, audio and display are not in sync with each other
please help

Zen 4 - Zen 6.5 Inventory database upgrade fails

Hi all,
Have installed Zen 6.5 over a Zen 4 server (nw65) running inventory.
Database is on a seperate oracle server.
When I start inventory, it starts the database upgrade and then fails
with a java exception part way through, and then says "stopping the
upgrade service".
Following is the log. Anyone know which bit is falling over and why?
There's a few errors in the log and I don't know which are cosmetic/non
critical. Either way, I've researched each and can't find any fixes
anyway.
cheers
Dave
[12/8/05 14:58:40.307] ZENInv - Server Config: The severconfig service
start is pending...
[12/8/05 14:58:40.464] ZENInv - Server Config: Getting Cascade INit
time
[12/8/05 14:58:41.462] ZENInv - Server Config: Database Location
Policy DN is CN=Server Package - DAN02:General:ZENworks
Database.OU=POLICIES.OU=APPLICATIONS.O=CHISHOLM
[12/8/05 14:58:43.573] ZENInv - Server Config: The severconfig service
is started...
[12/8/05 14:58:43.707] ZenInv - Upgrade Service: Info : Read
zenInvComponentStatus = 6.5 12 0
[12/8/05 14:58:43.707] ZenInv - Upgrade Service: Inventory Server
zenInvComponentStatus = 6.5 12 0
[12/8/05 14:58:43.720] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.desktop.inventory.storer.Stor erServiceInit'
[12/8/05 14:58:43.740] ZENInv - Storer: Start with
'ServiceStatusChangeListener' invoked
[12/8/05 14:58:44.824] ZenInv - Upgrade Service: Unzipping the file
migrate.zip
[12/8/05 14:58:46.718] ZenInv - Upgrade Service: Transforming the
Migration SQL files...
[12/8/05 14:58:51.768] ZENInv - Storer: zenworks.isClosed =true
[12/8/05 14:58:53.699] ZENInv - Storer: The current NDS tree=CIT
[12/8/05 14:58:53.724] ZENInv - Storer: Storer from dblocation user:
MW_DBA driver: oracle.jdbc.driver.OracleDriver protocol: jdbc:oracle:
subname: thin:@ port: 1522
[12/8/05 14:58:53.728] ZENInv - Storer: url[From DBObject]:
jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au:1522: dw
[12/8/05 14:58:53.756] ZENInv - Storer: wsdn:
CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLMi = 0
[12/8/05 14:58:53.973] ZENInv - Storer: Loading Storer test properties
file
[12/8/05 14:58:54.053] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.desktop.inventory.strconverte r.STRConverterServiceInit'
[12/8/05 14:58:54.059] ZENInv - STRConverter: Start with
'ServiceStatusChangeListener' invoked
[12/8/05 14:58:54.755] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:54.914] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.012] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.729] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.780] ZENInv - Storer: Database is not
initialized..will retry after 300 seconds
[12/8/05 14:58:55.787] ZENInv - Storer: Storer: Database not
initialized as it is being upgraded ...will retry after 300 seconds.
[12/8/05 14:58:55.788] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.826] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:55.860] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:58:57.439] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:04.100] ZENInv - STRConverter: Loading STRConverter test
properties file
[12/8/05 14:59:04.201] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.desktop.inventory.senderrecei ver.control.ReceiverServiceInit'
[12/8/05 14:59:15.618] ZENInv - SendRec Common: entPushDir =
SYS:\ZENworks\Inv\ScanDir\EntPushDir
[12/8/05 14:59:15.618] ZENInv - SendRec Common: entMergeDirD =
SYS:\ZENworks\Inv\ScanDir\EntMergeDir
[12/8/05 14:59:15.618] ZENInv - SendRec Common: dbDirD =
SYS:\ZENworks\Inv\ScanDir\DbDir
[12/8/05 14:59:15.625] ZENInv - SendRec Common: serverName = DAN02
[12/8/05 14:59:15.626] ZENInv - SendRec Common: serviceDN =
CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:15.626] ZENInv - SendRec Common: treeName = CIT
[12/8/05 14:59:15.626] ZENInv - SendRec Common: hasSSD = false
[12/8/05 14:59:15.626] ZENInv - SendRec Common: hasISD = false
[12/8/05 14:59:15.626] ZENInv - SendRec Common: hasESD = true
[12/8/05 14:59:15.632] ZENInv - SendRec Common: hasDB = true
[12/8/05 14:59:15.633] ZENInv - SendRec Common: securityDir =
SYS:\PUBLIC\ZENWORKS\WMINV\PROPERTIES
[12/8/05 14:59:15.661] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks3x.desktop.inventory.senderrec eiver.control.ReceiverServiceInit'
[12/8/05 14:59:15.882] ZENInv - CascadedBaseTime Server:
zenInvCascadeBaseTimeService: CBTServiceController: Startup Properties:
{basetime=Thu Jan 01 10:00:00 EST 1970,
servicename=zenInvCascadeBaseTimeService, portnumber=0}
[12/8/05 14:59:16.367] ZENInv - IFS Server: zeninvReceiverService:
FileServiceController: Startup Properties: {chunksize=4096,
transfers=100,
rootdirectory=SYS:\ZENworks\Inv\ScanDir\EntPushDir \ZipDir,
timeout=60000, servicename=zeninvReceiverService, portnumber=0}
[12/8/05 14:59:25.771] ZENInv - TCPReceiver: cascadingBaseTime = 0
[12/8/05 14:59:25.771] ZENInv - TCPReceiver: entPushDir =
SYS:\ZENworks\Inv\ScanDir\EntPushDir
[12/8/05 14:59:25.777] ZENInv - TCPReceiver: serverName = DAN02
[12/8/05 14:59:25.777] ZENInv - TCPReceiver: serviceDN =
CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:25.777] ZENInv - TCPReceiver: treeName = CIT
[12/8/05 14:59:25.778] ZENInv - TCPReceiver: hasDB = true
[12/8/05 14:59:25.971] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.common.inventory.dictionaryup date.provider.DictProvider'
[12/8/05 14:59:26.005] ZENInv - TCPReceiver: Receiver Started without
CLUSTER
[12/8/05 14:59:26.006] ZENInv - TCPReceiver: Receiver Binds to Port
Number : 65432
[12/8/05 14:59:26.073] ZENInv - IFS Server: zenInvDictProvider:
FileServiceController: Startup Properties: {chunksize=4096,
transfers=100, rootdirectory=SYS:\ZENworks\Inv\server\DictDir,
timeout=60000, servicename=zenInvDictProvider, portnumber=0}
[12/8/05 14:59:26.183] Service Manager: start(ServiceDataAccessor,
String[]) not found in
'com.novell.zenworks.common.inventory.dictionaryup date.consumer.DictConsumer'
[12/8/05 14:59:28.918] ZENInv - Dictionary Consumer:
DictConsumerUtility::getUpdatePolicyDN: getDictionaryUpdatePolicy
returned attribs.returnValue = 0
[12/8/05 14:59:28.919] ZENInv - Dictionary Consumer:
DictConsumerService::DictDownloadThread::run:
UpdatePolicyNotFoundException.
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.UpdatePolicyNotFoundException
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerUtility.getUpdatePolicyDN (DictConsumerUtility.java:237)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.setUpdatePolicyAttribs(DictConsumerService.java: 688)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.getFileClientProperties(DictConsumerService.java :616)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.transferFiles(DictConsumerService.java:429)
at
com.novell.zenworks.common.inventory.dictionaryupd ate.consumer.DictConsumerService$DictDownloadThrea d.run(DictConsumerService.java:211)
[12/8/05 14:59:28.921] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:28.953] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:28.986] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:29.326] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:29.326] ZENInv - Dictionary Consumer:
DictConsumerService::FileDownloadListener::downloa dFailed.
[12/8/05 14:59:59.680] ZenInv - Upgrade Service: Starting Schema
Migration
[12/8/05 14:59:59.751] ZenInv - Upgrade Service: mw_dba->alter
tablespace cim3 default storage (maxextents unlimited) is being
executed
[12/8/05 14:59:59.752] ZenInv - Upgrade Service: Could not do the
operation. details:ORA-25143: default storage clause is not compatible
with allocation policy
ErrorCode:25143
[12/8/05 14:59:59.752] ZenInv - Upgrade Service: Totaltime taken for
Schema Migration : 38
[12/8/05 14:59:59.851] ZENInv - Storer: cim.isClosed =true
[12/8/05 14:59:59.937] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 14:59:59.970] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.133] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.277] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.719] ZenInv - Upgrade Service: migrateDbToMidas(true)
failed in AlterProcedure
[12/8/05 15:00:00.728] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.761] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.795] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.964] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:00.966] ZenInv - Upgrade Service: Upgrade database to
ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
server again
[12/8/05 15:00:00.967] ZENInv - Status Reporting: Messages are written
into XML file for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.000] ZENInv - Status Reporting: Number of records to
add are: 1 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.038] ZENInv - Status Reporting: Adding record 0 for
DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.188] ZENInv - Status Reporting: Number of modified
records are: 0 for DN=CN=DAN02_ZenInvService.OU=DAN.O=CHISHOLM
[12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, Running EnumModifier in integrated mode with
upgradeService
[12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbDriver:oracle.jdbc.driver.OracleDriver
[12/8/05 15:00:01.237] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables,
dbURL:jdbc:oracle:thin:@ora01a.chisholm.vic.edu.au :1522:dw
[12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbType:1
[12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbUser:MW_DBA
[12/8/05 15:00:01.239] ZenInv - Upgrade Service: [EnumModifier]
modifyEnumTables, dbPasswd:novell
[12/8/05 15:00:01.248] ZenInv - Upgrade Service: [EnumModifier] Product
Version: ZFD 4
[12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
checkConditions(), Executing check 'Statements':5
[12/8/05 15:00:01.298] ZenInv - Upgrade Service: [EnumModifier]
DatabaseEnumsModifier::checkResult(), query: insert into
cim.upgrademethod_en_US Values (13, 'Socket 423')
[12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
checkResult, errorcode:1
[12/8/05 15:00:01.311] ZenInv - Upgrade Service: [EnumModifier]
checkResult, Non-fatal error:1
[12/8/05 15:00:01.312] ZenInv - Upgrade Service: [EnumModifier]
DatabaseEnumsModifier::checkResult(), query: insert into
cim.upgrademethod_en_US Values (14, 'Socket A (Socket 462)')
[12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
checkResult, errorcode:1
[12/8/05 15:00:01.316] ZenInv - Upgrade Service: [EnumModifier]
checkResult, Non-fatal error:1
[12/8/05 15:00:01.317] ZenInv - Upgrade Service: [EnumModifier]
DatabaseEnumsModifier::checkResult(), query: insert into
cim.upgrademethod_en_US Values (15, 'Socket 478')
[12/8/05 15:00:01.321] ZenInv - Upgrade Service: [EnumModifier]
checkResult, errorcode:1
[12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier]
checkResult, Non-fatal error:1
[12/8/05 15:00:01.322] ZenInv - Upgrade Service: [EnumModifier] Da

ok putting inv into "ALL" debug mode, it told me it was running
init_sl_0.sql
I found this file contained in migrate.zip under the wminv\properties
directory.
So I extracted the migrate.zip file, edited init_sl_0.sql and removed
the alter tablespace lines. Why they're wanting to do alter tablespace
I have no idea - applications shouldn't expect to be able to do that...
it's up to the organisation and the DBA to manage the tablespaces, not
the application.
I then re-zipped all the files using Winzip and named the file
migrate.zip and placed it in the properties directory.
Now, when the upgrade runs I get a java exception when it tries to
unzip migrate.zip and the upgrade bombs.
I also tried just opening the migrate.zip file with Winzip and directly
editing the file from within Winzip, which does allow for this. However
it appears the files inside the archive are flagged read-only, so
Winzip can't rewrite the edited file back into the same folder location
within the archive.
Here's the java exception:
***12/21/05 16:24:40.789] ZenInv - Upgrade Service: Unzipping the file
migrate.zip
[12/21/05 16:24:40.827] ZenInv - Upgrade Service:
[12/21/05 16:24:40.827] ZenInv - Upgrade Service: Exception while
unzipping the migration zip file
java.lang.NullPointerException
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unZipFile(AlterProcedure.java:4557)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.MigUnzip.unzip(AlterProcedure.java:4522)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1983)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.AlterProcedure.unzipMigrateZipFile(AlterProcedu re.java:1975)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.aInitMigration(Upgrade ServiceController.java:218)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
com.novell.zenworks.desktop.inventory.senderreceiv er.statemachine.StateMachine.execute(StateMachine. java:68)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceController.init(UpgradeServiceCon troller.java:113)
at
com.novell.zenworks.desktop.inventory.upgradeServi ce.UpgradeServiceThread.run(UpgradeServiceThread.j ava:81)
[12/21/05 16:24:40.828] ZenInv - Upgrade Service: unzipMigrateZipFile()
failed in AlterProcedure
[12/21/05 16:24:40.829] ZenInv - Upgrade Service: in aLogError() method
[12/21/05 16:24:40.830] ZenInv - Upgrade Service: Upgrade database to
ZENworks 6.5 failed. Reinstall ZENworks 6.5 and start the inventory
server again
Ok.. what am I doing wrong ? :) It shouldn't be this hard....
cheers
Dave

Connecting Zen Microphoto to a new

I am buying a new car, and want to be able to connect my Zen Microphoto to play?through the stereo. The car maker offers a?USB connection as an option, and I want to know whether I should take it. The car manufacturer says this about the USB connection:?"[size="2" face="Arial">As with the iPod preparation the USB preparation by Individual allows you to enjoy all [size="2" face="Arial">your favourite music through the keypad of your radio or multifunction steering wheel.[size="2" face="Arial">Functions:
[size="2" face="SymbolMT">* [size="2" face="Arial">USB preparation connects your USB-stick or USB-player with USB certification [size="2" face="Arial">with your car radio. Due to size variations, bigger USB-players can be connected [size="2" face="Arial">via an adapter cable (not supplied)
[size="2" face="SymbolMT">* [size="2" face="Arial">The following formats are supported: MP3, WAV, WMA and OGG VORBIS
[size="2" face="SymbolMT">* [size="2" face="Arial">Your USB-stick or USB-player is automatically identified when docked
[size="2" face="Arial">*?Control of your USB-stick or USB-player can be either through the radio-keypad [size="2" face="Arial">or the optional multifunction steering wheel
[size="2" face="SymbolMT">* [size="2" face="Arial">Track number -99 and timer are visible on the radio and multifunction display
[size="2" face="SymbolMT">* [size="2" face="Arial">Shuffle mode
[size="2" face="SymbolMT">* [size="2" face="Arial">Scanning mode
[size="2" face="SymbolMT">* [size="2" face="Arial">6 main folders are displayed."
[size="2" face="Arial">I have used Windows Media Player to rip my cd's?in WMA format, and then sync to my Zen (it says WMA format is supported above).
[size="2" face="Arial">?
[size="2" face="Arial">Could someone tell me whether this will this work?
[size="2" face="Arial">?
[size="2" face="Arial">Thanks

literaturelover wrote:
I just had a Pioneer deck installed in my car to replace the factory unit. It has a USB connection, but when I connected my player to it, I got a message saying that it would not work. There is an accessory input on the face of the unit; how do I use that with my MP3 player?
to use the player with the usb port you will need to add music files to the removable disc area of the player & when you connect the player to the stereo it must be in removable disk mode for the car stereo to read the files. If the car has a AUX input on the front you can buy a cord like this one? http://www.walmart.com/catalog/produ...duct_id=820445 connect it using the headphone jack on the player. The removable disc mode gives the better sound quality. Can you post a link for your model car stereo?

Zen vision:M Need new outfit. Screen dam

Well i use my Zen vision:M every day. and that protecting thing slip off.. So now the vision in videos is pretty bad.. because screen damage.. can i Buy new outfit to my Zen some where?!
ps: Sorry, Bad english..

Valu,
When you say screen damage, do you mean that the screen is scratched?
If you are looking for screen protection, there's one in the online store.

ZEN 7.0 Inventory Issue

We've setup a test bed ZEN 7.0 server on a NW 65 SP5 server. We setup the Inventory policy and have imported a couple of PCs. We are getting the following errors when we try to inventory:
Scanner(Warning) : 027: Unable to read the sequence number from the Workstation object.;
Scanner(Error) : 028: Unable to read the SCANDIR directory location from the Inventory policy.;
Not sure what to do. Everything looks correct as far as settings, but . . . .

Christopher,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

How do I transfer music from my Creative Zen Micro to my new Mac Mini?

My Mac Mini does nothing when I plugged my Zen in by usb. My old Windows computers would automatically detect new hardware and lead me through the process.

The music sync is one way - computer to ipod. The exception is itunes purchases: File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer. Use your backup copy to put everything back.

Zen server mgmt - inventory service not connecting

installed ZENworks Desktop Management 6.5 and somehow I see ZEN works
Server management on the Console screen. I did NOT install ZEN for
servers so I don't know how or understand why I have three 'ZFS' files in
my sys/zenworks directory - these files start ZEN Server Management.
Now I can remove/rename these files so Server Management doesn't start,
but then my ZENworks Inventory Service doesn't connect to the 'XML'.
Apparently my Inventory service is pointing back to the ZEN Server
Management db????
What is the correct way to get rid of ZEN Server Management, and how do I
make sure Inventory service is connected to the correct place(db).
I also have a quick question about registration. shouldn't it happen at
every boot? And what is the correct reg that points to the server. I've
seen two things:
novellzenworkszenwsreg import server = 222.222.222.222
and
novellworkstation managerImport Server default = 222.222.222.222
which one is correct.
right now my workstation, when it registers, does so three times! It
creates, then sees a duplicate and another duplicate
Should ZEN for Servers be installed with Desktop Management? it has
happened to me 4 times so It's not a mis-click of the mouse.

doug,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Cannot load Zen MicroPhoto software on New Windows 7 laptop

Just bought a HP laptop with Windows 7. I try to load the Zen Microphote software disk, and it seems the software doesn't like an unknown operating system.
Any suggestions ? Is there a new release?
My version is 5.0.09
[email protected]

You should not need any Creative software on the new computer Windows Media Player can sync & organize the player.Just connect the player & allow Windows to install it.

Zen V Plus, brand new no scre

Hi, I have looked through the questions and solutions on here and the knowledge base and found nothing of use in this situation. I have just recieved a brand new Limited Edition Pink Zen V Plus 2GB. It has been charged and all associated software installed and firmware updated. The screen doesnt work. At all. Nothing. Its been charged for at least 0 hours. I have followed instruction from the knowledge base. Problem being there is no screen to enable me to see what if anything the instruction has done. I can put music, pics etc onto the player with the software that came with it. I can also delete everything with the format option. I have updated the firmware. I have reset the player countless times. The little blue buttons light up but there is absolutely no other visual indication that it is working.Being brand new out of the box I wouldnt expect this.Anyone else have any ideas?I have contacted the provider and am awaiting return advice. Frustratingly,Masher:angry:

Hi Masher,?Just bring down to Creative shop n get it replaced ...as long the warranty still in effect.

Zen Micro: I'm new and need some h

I got my creative zen micro a few weeks ago and I have some questions.
I'm using Plays For Sure from MSN. Now that I've downloaded that do I always have to use it's Can I subscribe to other services like Rhapsody?
Is there any help for organizing my music? I try to make a new playlist and it shows up on the computer and says it's syncd but I can't find it on my micro.
I have some workout selections with voiceovers like cardio coach and some motivational speeches. Is there a way to isolate those so I can still use the shuffle feature and dj type features without those getting into the mix?
There's a small square of some kind in the upper right corner of my screen with a "" in it. What is this?
This is so confusing for me.

I'm using Plays For Sure from MSN. Now that I've downloaded that do I always have to use it's Can I subscribe to other services like Rhapsody?
In theory yes. I don't know how well the Micro works with tunes from different stores on it, but I've yet to hear that people have had problems.
Is there any help for organizing my music? I try to make a new playlist and it shows up on the computer and says it's syncd but I can't find it on my micro.
This is the only thread I know about playlists with WMP0 and the v2 firmware. Have a look and see if it hel
ps.
You can of course create playlists with MediaSource and ZMME, but you must get the updated versions for the v2 firmware from Nomadworld.com downloads.
I have some workout selections with voiceovers like cardio coach and some motivational speeches. Is there a way to isolate those so I can still use the shuffle feature and dj type features without those getting into the mix?
No. It's been a longstanding wishlist item.
There's a small square of some kind in the upper right corner of my screen with a "" in it. What is this?
It's a play mode. There are various play modes that you can use, so that the queue does different things e.g. play randomly. The one you have selected is Repeat Track. To change the play mode from the queue press the menu button (bottom right-hand corner) then scroll down to play mode, select it and change.

Zen Vision M 30GB - New Synch Adapter and Char

Hi,
I need a new synch adapter and charger for my Creative Vision M 30 GB.
Im in Australia and have been unable to locate it at any of the retailers that Creative have specified.
Im wondering if I can get one directly from Creative, or is this all a ploy to force me to get a new player
Thanks,
John?

Ebay or ? google search engine.

Zen 2.0 - Inventory & New Compaq Deskpros

Similar Messages

Maybe you are looking for