Zen 20G Accesories [Not totally sure if this is in the right pla

To the readers, why is that all the accesories are all focused on the new Zen Neeon and Zen Micro? Can't they make a Zen Touch or Zen Leather case lyk those models? In other words, why is that these products have barely any accesories?
This is just by curiousity.
CHeers peeps

Hey Fungry,
i just bought a zen 20G last weekend. I agree with you! we need more accessories! I tried the remote from a zen micro, and it works. I wish they had included a remote with the zen 20G.
is it available anywhere in singapore? if so, how much?
thx!

Similar Messages

  • Trying to open Terminal I get;You are not authorised to run this application. The administrator has set your shell to an illegal value.

    Hi There Y'all,
    I have recently downloaded MacKeeper. It ran OK for a bit, but has recently stopped allowing Internet security updates and switching on of the internet protection options.
    Asked for help at MacKeeper. Their initial advice did not work, so a very nice technician was going to remotely attempt to fix the issue.
    He however needed/still needs access to Terminal, a to me unbeknown Utility feature of my MacBook pro with Mac OS X 10.6.8.
    While attempting to open Terminal the following came up
    You are not authorised to run this application.
    The administrator has set your shell to an illegal value.
    Did do a diskverify permission and repair and restart.
    Did check my admin settings in advanced options and have the /bin/bash.
    Any advice anyone.
    Thanks.
    in site out

    After finally localing private/etc/shells through Go>Go to folder and replacing the empty shells with the shells~orig I have permission again to open Terminal. Thanks. Another step.
    (Why though can't I access  /private/etc/...  through Finder's search?)
    Should work but the file or folder needs to exists to access it.  If you typed in /private/etc/shells and the file wasn't there there's no place to access.  Certainly /private/etc was there so that would have worked.
    So what will happen by inputting the lines
    ls -Fvl /bin/bash
    ls -Fvl /etc/shells
    more /etc/shells
    into Terminal?
    Basically to find out what you already seemed to find out.  The first command was to display owner, group, and permissions of  /bin/bash and to tell me whether it still existed.
    Similarly for /etc/shells.
    And the last command would have just displayed what was in /etc/shells.
    By the way /private/etc and /etc are the same folder.

  • After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

    after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
    steve

    See this tip --> http://support.apple.com/kb/TS1559
    If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

  • [HP Expert Day] "You are not able to restore this system with the media"

    Welcome to HP Experts day! 
    I've got a long-standing problem since last year. Let's see if you can solve this! 
     I'll get straight to the point : 
    I am unable to perform recovery on my system. This is the error message : 
    It's a USB recovery media created with the HP recovery media utility on the same laptop. Tested to work correctly before I sent it for RMA on my SSD. It initially was running on a micron SSD. When I got it back, it was a samsung SSD instead, according to some benchmark results. 
    Laptop : HP Envy Spectre XT 13-2018TU
    P.S I've already opened another thread on this last year. 
    http://h30434.www3.hp.com/t5/Notebook-Recovery/Unable-to-boot-from-USB-recovery-media/m-p/2197929#M1... 
    But they were stumped. 

    I had this exact same issue on a Spectre XT Pro Ultrabook. 
    The original SSD failed and I was sent a replacement, was fortunate enough to be able to create a Recovery USB stick using the wizard in Windows. When booting from USB I received the message "You are not able to restore this system with the media".
    SOLUTION: You must NOT use the Recovery USB stick in any USB3.0 port (labelled SS). Using another USB port prevented this exact error message from appearing and I was able to complete the system restore process.
    I hope this helps someone, I signed up and posted here especially for this reason!

  • I am exporting a 2 min video, using a custom compressor setting. i have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

    I am exporting a 2 min video, using a custom compressor setting. I have not had issues with this setting in the past, but recently its taking upwards of 4 hours to process. Any idea what is going on?

    Name: Vimeo HD Encode
    Description: No description
    File Extension: mov
    Estimated size: 2.3 GB/hour of source
    Audio Encoder
              AAC, Stereo (L R), 44.100 kHz
    Video Encoder
              Width: 1920
              Height: 1080
              Pixel aspect ratio: Square
              Crop: None
              Padding: None
              Frame rate: (100% of source)
              Frame Controls On:
                        Retiming: (Best) High quality Motion Compensated
                        Resize Filter: Statistical Prediction
                        Deinterlace Filter: Best (Motion Compensated)
                        Adaptive Details: On
                        Antialias: 0
                        Detail Level: 0
                        Field Output: Progressive
              Codec Type: H.264
              Multi-pass: On, frame reorder: On
              Pixel depth: 24
              Spatial quality: 75
              Min. Spatial quality: 25
              Key frame interval: 30
              Temporal quality: 50
              Min. temporal quality: 25
              Average data rate: 5.12 (Mbps)
    Compatible with Mac
    My video in the timeline is 1920 x 1080 / 23.98 fps
    I've installed Toast and photoshop elements recently, i also updated my apps the other day.
    I have had this problem before the updates of the apps though

  • You are not permitted access to this workstation at the moment. Please contact y

    Showing error "
    You are not permitted access to this workstation at the moment. Please contact your IT administrator.
    This topic first appeared in the Spiceworks Community

    Showing error "
    You are not permitted access to this workstation at the moment. Please contact your IT administrator.
    This topic first appeared in the Spiceworks Community

  • Please fix your web plugin immediately, yes this message in the right forum

    Ok.
    On my mac, java takes about 5-10 seconds to load in a web page applet from either safari or chrome.
    This is 4.9 to 9.9 seconds too long.
    PC is a bit faster but not much.
    Sun absolutely wrecked java with respect to the web-client.
    Please fix this.
    Why: Because I want to write web-apps which don't suck. Which means I can't use javascript. Because despite the gajillions of money poured into marketing, it is really very, very slow.
    How to fix:
    It is very easy.
    1. Use PhoneME with JIT. (get startup time to near zero). You might say, "well, we're about to get java to have zero startup time." But this is what you have been saying for ever, and failing at, miserably! Stop trying, give us a JavaME plugin instead.
    2. Do NOT distribute monolithic massive class libraries. Instead, give me the opportunity to create class loaders. (I know you think you already do, but please look up the 10 year old bugs regarding the web plugin and class loaders). Make the distributable as SMALL as possible.
    3. Are you writing the pluginin "in-between" code in webkit? If you are, fire who ever is writing it. If you aren't, WTF, the connection between the browser and java is slow as a slug. If I was just a bit more of a cynic I would think google is putting in usleep(1000) between calls. Take this code over NOW.
    Look, you STILL have a tremendous opportunity in the web-client-space.
    You need to show that Java is BETTER than javascript. Which it could be.
    But currently it sucks.
    It uses too much memory, it has a slow startup time, the connection between javascript and java is slow.
    I should be able to write <script type="jar.pack.gz/java" src="blahblah.jar.pack.gz"></script> and multiply my performance by a thousand. Please do it.
    I should be able to use a java2javascript library to simplify modifying the dom.
    I shouldn't have to write javascript, except for inline code.
    BUT INSTEAD I'M SPENDING MY TIME OPTIMIZING GWT.
    Javascript sucks, we all know it is rising because of a vacuum of any real performance.
    Please fill this void, or someone else will.
    Thanks,
    -tim

    yes this message in the right forum No it isn't. This is a user to user forum. If you want Oracle's attention, submit a bug report, or contact their support channels.
    Locking this thread.

  • Boot Camp Assistant does not allow partiton when my disk is the right format

    Boot Camp Assistant does not allow partiton when my disk is the right format - (Mac OS Extended (Journaled) volume).
    When I go to the Boot Camp Assistant to partition the Macintosh HD disk, an error comes up saying,
    "The disk cannot be partitioned because some files cannot be moved
    Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
    Please help me out! I would really appreciate it!

    I was not allowed the Repair Disk option. I tryed Verify Disk, and an error came up saying,
    "The volume Macintosh HD was found corrupt and needs to be repaired.
    Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."
    What should I do?

  • Hi, How I can duplicate website? I have not any possibility to do it on the right button of mouse. I used to have it, but now I can not find it. can you help me please. Kind regards kate ( email: ukaska@interia.pl)

    Hi, How I can duplicate website? I have not any possibility to do it on the right button of mouse. I used to have it, but now I can not find it. can you help me please. Kind regards kate ( email: [email protected])

    What do you mean with duplicate?
    Where do you want to duplicate a website?
    Do you want to open the same site in more than one tab?<br />
    Do you want to create multiple bookmarks to the site?

  • Just updated my old iphone4, it as no sim card in, as i use it mainly for playing music.updated it to ios7 and when i intially open it up, it asked for a sim lock code.was'nt sure of this. i put the passlock code in. now its asking for a PUK code.

    ***.are Apple doing? why offer an update without warning people about the  consequences!
    I've just updated my old iphone4 to ios7. this phone as no sim card, as i use it more like an ipod..after the update it ask for a code, i put in the passlock code.
    Unbeknown to me the sim lock and the passlock codes were different! as the sim as been deactiavted by my carrier they cant give me a PUK code!
    I'm now stuck with a phone i cant use
    any suggestions please!

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

  • How, on the ipod touch 5th gen, can you get rid of songs in the songlist?  I restored from a stolen ipod touch 4th gen, and now there is a bunch of crap that is not even mine on this thing.  The songs only show up in the songs listing.

    I had my last ipod stolen, when I got the 5th Gen I restored from my old ipod from itunes and now there is a bunch of crap on there that I don't want, but the songs only show up on the ipod so I can not delete them off of the ipod from itunes.  Any quick fixes to remove the unwanted songs, or do I have to start over completely?

    Do they play on the iPod?
    If not then they are corrupted.
    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    What is the Other on my iPhone and How to Remove It
    If the other is larger than about 1 1/2 GB that indicates corrupted file.

  • The web pages are not centered, they are way over to the right and so not only can I not see the page, I can't see the scroll bar or web address.

    It is like the page shrinks up and moves way over to the right hand corner and I can't pull it back. I tried mini and maxi -ing the screen ... nothing works!!!
    I cant' move the page down to see what the directions are for this box so I am typing this and hoping for the best. Sometimes the arrows will scroll down and other times not.

    Hi Mike ...
    If you haven't tried a different DNS, OpenDNS may help.
    Use OpenDNS for better speed, more security, includes anti phishing filters, prevents browser redirects, it's free and Apple suggests it here >  Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
    Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
    Click +
    Enter these addresses exactly as you see them here.
    208.67.222.222
    Click +
    208.67.220.220
    Then click OK.
    Quit then relaunch Safari to test.
    Mike, empty the Safari cache more often. From your Safari menu bar click Safari > Empty Cache

  • Is there an add-on to put `close this tab' on the right click drop down?

    While I know `close this tab' appears in the dropdown when you click ON the tab (which is sort of ridiculous when you could just click on the tab's `X'), but the same `close this tab' doesn't appear on the dropdown when you right click somewhere in the middle of the window
    My question is this : Is there an add-on which puts the phrase where it's really needed - namely when you right click somewhere IN the window, so you don't have to maneuver the mouse to the tab itself or do the keyboard close?
    == This happened ==
    Every time Firefox opened

    Hello Frebe.
    There is indeed. Try [https://addons.mozilla.org/en-US/firefox/addon/710/ Menu Editor]. Using it has many advantages, of course, since you can change the place of pretty much everything, and hide menu items and whole menus if you want, but what you'll want to do is to move the "Close this tab" from the one menu to another.
    If you need help using the extension (it's not really THAT intuitive), I'll help.

  • When Firefox 30 updated it knocked out my note unit that used to be on the right corner near the other control, can I get it back

    The note add on I am looking for was designated by a square in the right hand corner. It had all my doctors phone numbers and appointments etc., and I have lost the lot since the upgrade. The other thing is I can remember the name of add on, all I can remember is Firefox asked me to install it, I didn't go looking for it.

    HI nibar7,
    Thank you for your question, I understand that there was an add on that you had in the right hand corner that is no longer there after an update in Firefox. Please try [[Re-enable add-ons that were disabled when updating Firefox]] to see if the add on is still installed, but not longer active.
    However if this add on was not compatible with the new update, it is removed in the update process. Please check to see if you have a back up of the profile from before the update.

  • I have FF Mobile loaded on my Transformer Prime with ICS. I have read through all the tutorials about installing addons but my FF does not have a slide out menu on the right side. So I cannot click on the gear button to open the settings.

    I believe this started after the update from 3/13. I remember setting the user agent at some point when i first loaded it. Now I am unable to get to that option.

    Update: I have also loaded FF Beta and Aurora and I have the same problem. No way to open the settings menu.

Maybe you are looking for

  • Folder access across all Modules ?

    Hi, Something that irritates me with LR(2,3,4) is that the FOLDER panel is not available across all modules. hence you have to create a collection or preselect your pictures first in Library . Does this bother anyone else ?

  • Dvd drive disappeare​d

    The dvd drive on my HP Pavilion laptop disappeared!  How do I fix this.  I need to look at some dvd/cd now. 

  • Sapscript - Paragraph Format - Tab space Issue

    Hello Experts, I'm facing issue with the Tab Space Alignment in the Paragraph Format. I'm giving these values for a Paragraph Format Tabs: Tab  Position: 1: 0,10 CH 2 :3,50CH 3: 6,50CH 12: 76,00CH Inspite of reducing the TAB position for 5th Tab; it

  • MacBook Pro Retina 2013 15" 2.8Ghz i7 OVERHEATING

    Hi, I have MacBook Pro Retina 2013 15" 2.8Ghz i7 I use istat fan is set to max about 5500rpm. Temperature in idle ( clean reinstall just with istat menus, chrome, geekbech ) is about 80C when I try run geekbench temperature is about 105-110C so is ve

  • WRT54GL frequently drops WAN connection

    Hi, I'm having a problem with my WRT54GL 1.1 router, namely it has a nasty habit of dropping WAN DSL connection. Firstly I attributed this to modem, but my ISP's tech support sent me a list of connection resets that are caused by the router not the m