Zen 30g not respond

After putting a couple new songs on my zen and rearranging the albums, I unplugged my zen and now the screens black (But notcompletely off, the backlight is still on) and it's not responding. I tried turning it off, plugging it back in (Front and back USB ports). Anysuggestions?

Hi,
Which Zen player do you have?
Have you tried the recovery mode options?

Similar Messages

Zen 8gb Not Responding - First Cha

Here's the deal. I followed all the installation instructions. Plugged my Zen into the USB port and nothing happened. It's been about 7 hours. All that happens is the creative logo appears on the screen and than the screen goes blank. I pushed the reset button with a paper clip but all that did was turn the player off. I proceeded to turn the player on and got the logo again followed by the blank screen. My system is not recognizing the device for some reason. I've ruled out all the obvious things like a faulty USB port or Service Pack 2 not installed and crap like that. I can't even be sure the thing is being charged since nothing happens when I plug it in to the USB port. Any help would be great, thanks!

When I have my new Zen hooked up to the computer, it will show the "Docked" screen and not respond. Is this normal? No black screens though.
Can someone varify that upgrading will help? Which upgrade?

Zen player not responding/not turning on

My zen just stopped working. it was fully charged and I loaded it with music but when I turned it on later in the day to use while running, it didn't turn on. it won't respond to reset, charging and no computer recognizes it when I plug it in. seems I have a dead zen. I've tried everything I've read on several forums. Any more ideas would be appreciated.
I'm about to give up on my Zen. we've already had to send it in to the factory to be fixed once. these things are not made well.

I have the same problem with my zen stone, they told me in the Technical Support to connect it to PC,then push reset for 0 seconds and charge battery during two hours. It didn't help so in their opinion I should go to the shop I bought it and have it changed for another one. I don't think there is any other solution in your case too
I had MuVo before I bought Zen, the previous one was working perfectly whole three years, I don't know why Zen players are so much worse
Nenya

Zen Installer Not Respond

I was in the process of installing the software for the Zen MP3 player, when the installer stopped responding.
It installed the first three items, but now it is stuck and says "Installation is in progress. Please wait a while." It has been like that for the last half an hour.
I do believe there is a problem.
What should I do?

Ok. Thank you very much for your help!

Zen micro not respond

Hey, Can anyone help me here? My micro has power, but when I turn it on it just shows the creative logo, if i go to the recovery mode, nad select any option, nothing happens, any ideas?

Creative will probably run through some checking again that the player is faulty, and if it is confirmed then you return it to them for a replacement.

Zen Micro Buttons not responding help!

Hey , My zen micro was working fine till today when I turn it on all my "digital" button are not responding , the only working button is the power on/off button, it syncs perfecly but I cant do anyhing with all the other buttons, I tried reinstalling the firmware but it still dosnt work , ant I cant reset it cause the buttons dont work .
any ideas ?

did you push ur buttons too hard? or squish it or anything? it's a TOUCH pad, so you shouldnt apply too much pressure on it, a good light tap will do it. Are you still under warrenty? call Creative and check it out.

ZEN 4GB is not responding

Hello everyone,
I have purchased the ZEN 4Gb at the end of January, and its been only three weeks since I have it.
A week ago it just stopped working.
When I hold down the power button, nothing is happening. No blue light, nothing.
I thought maybe the battery ran out and put it to charge. When I connect it to PC via usb cable, I can see the screen flickering constantly.
I tried the reset button, the recovery mode (reset, play button, and power on). The Zen is simply not responding to whatever I do.
I would appreciate your help

Anyone encountered the similar problem?
Please I really need your help!
As I purchased the player in a different country, it will take some time before I can return it for replacement.
Maybe there is a way to fix it, isnt there?
Knowledgebase wasnt much of a help since this case is not included in there.
Is it a product defect? What might possibly cause the player die all of a sudden?

ITunes not responding error message when iPod is connected

I cleaned up all of my music on my external hardrive. I moved the cleaned up librery to iTunes. I connected my 30G iPod and I reset the content on the iPod, but now I can not sync with the computer and Itunes frezes and gives me an error saying that Itunes is not responding. This happens everytime I connect my iPod; now I have no music on the Pod.

hi joyful!
just checking. reboot the PC, and prior to launching itunes or plugging in the ipod, bring up your Task Manager to the "processes" tab.
is there an iTunesHelper.exe running in your processes?
Background processes installed with iTunes 6 for Windows
love, b

Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help

I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need help

Originally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem

Application net_rim_bb_file_explorer (206) is not responding: process terminated

When I attempt to post an image to facebook, the device-Curve 8530 'locks-up' ... and I eventually receive this error...any insights?
Application net_rim_bb_file_explorer (206) is not responding: process terminated.
thank you.

I solved this problem by changing the theme to Precision Zen.
However, my inbox appeared twice. I had to hide one of them.
That's it.
I think it's not an OS bug, but a theme bug.
A bug, nonetheless.
Lucas Martins Moreira
I have a
Blackberry 8520 Curve
VIVO - Brazil
PIN 21EE8C7E

Zen 30g NX Audio probl

My player is giving me strange audio it sounds like it has a reverb or flange effect on it. The volume is low and it is unlistenable because it sounds like a 2 dollar transistor radio. I've reformatted and loaded the latest firmware tried 3 different headphones and I?m still having the same problem. It could be the headphone jack but I?m note sure of it. Can some one help me out I hope it'ss not a hardware issue.
Player: Zen 30g NX
Firmware: .0.02

How long have you had the player, and when did this start happening?
It sounds like the PCB has failed in some way if you've tried all the things you listed.

I can't open firefox the running but not responding window opens and says to close the existing window. I can't do that shutting down the computer doesn't do anything to help. I've done all the suggestions here. I've uninstalled and reinstalled firefox

Firefox will not open. I get the firefox is already running but not responding window... I have tried rebooting with no help. I have tried to end the process via cntrl+shift+esc and nothing firefox is listed to end. I have tried find the app data via the run icon in the start up window, I have no run icon on this system (Acer with windows vista(?)
== This happened ==
Every time Firefox opened
== The computer was hard shut down and did a improper shut down scan when it was restarted ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; FunWebProducts; GTB6.5; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

I am having a similar problem. Running Xp.
Latest revision of firefox.
After using firefox for a while if I exit, parent.lock is locked and i have to reboot to reload firefox.
I have killed all firefox applications from task manager (usually there are none). and I have tried 3 different "file unlock" programs including unlocker to no avail.
I also recently installed a program that shows -all- open files, and parent.lock is not listed, and thus not closable/unlockable from there.

Frequently when I open Firefox it says Firefox is already running but is not responding. I have to go to the task manager, find Firefox and close the process before I can get firefox to load.

Those are all the details I have

There is an article about this problem see:
* [[Firefox is already running but is not responding]]

PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.

Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments

IPod not recognized by iTunes. Also iPod seems disabled/locked showing "do not disconnect". Not responding to anything. Any help please.

My iPod is not being recognized by iTunes. iPod seems disabled and not responding to anything. Permanently on "do not disconnect". Not sure what to do.

Hello,
My iPod is not being recognized by iTunes or internet
explorer. It used to, but not anymore. It just
dosent show up when I connect it to my computer.
Also, the "do no disconnect" sign does not appear on
my iPod when I connect it. It is still able to
recharge, though.
have u tried a different usb port?
I read that I have to restore it. I have tons of
songs in my iPod that I do NOT want erased! How can
I back these songs up? I have some songs on my iPod
that are from another person's computer, so if they
get erased, the songs are gone forever.
try this http://www.copypod.net/
Nano 4GB black|Moto RAZR V3 black| PSP| all kinds of cases for nano|radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/c.jpg" ="right"

Zen 30g not respond

Similar Messages

Maybe you are looking for