Zen 4 gb volume not loud enou

I just purchased the zen 4 gb and noticed that my media plays barely loud enough to hear but when i use the voice recorder the sound is great i saw online that some firmware for europee limits how loud my player can play music can anyone help me out here?

"I just purchased the zen 4 gb and noticed that my media plays barely loud enough to hear but when i use the voice recorder the sound is great"
to me, that doesn't sound as if the volume is limited by the player...
perhaps you should try increasing the volume of your media?
For mp3 files there is a nice little tool called mp3Gain, that will allow you to adjust the volume of your music, without affecting the quality (the mp3s are not re-encoded). I've set all my music to 96dB using this tool, and under normal conditions a volume of 0 is more than enough for me.Message Edited by Hmpf on 0-03-200805:49 PM

Similar Messages

  • N900 in coming call volume not loud enough

    N900 in coming call volume not loud enough
    Can any one help please
    When some one calls me i can just about hear them.
    I have looked in phone settings etc but cant find where i can turn it up.
    i know you have a volume control when a call is taking place and is right up but dont think it is that.
    any help would be grate thanks.

    I am having similar problems with my phone, mostly just when using the earphones/mic that came with the phone. Don't have any solutions yet, just wanted you to know there are others having similar problems.

  • Sound recorded from the phone through in-line to Zen V is weak, not loud eno

    I wonder if anyone is trying to achieve the same result with more success. When I record from the phone through a cable to the Zen V and transfer the recording to the computer the sound is not loud enough to be easily understood, despite the fact that on the Zen with the earphones the quality is satisfactory. Can someone help get a louder recording into the computer?TIA

    I have tried that. I had listened to the headphones to monitor the sound. It is the pre-set recording level programed in the player. There should be a way to back it down if needed or set the pre-prog. level to a lower setting on the line-in mode. So far Creative is working with me via e-mail. Hopefully they can remedy my situation. Somehow I think I am not the only one with this problem.

  • Volume - Not loud enough.

    My husband and I would like to listen/watch videos without headphones, however, the maximum volume is not loud enough for us to understand some words. Is there a way of increasing the maximum volume output without the use of external speakers or headphones?
    Thanks.

    Open iTunes on your computer---Podcast--->
    Pick the Podcast you want to raise the volume--->
    Press the keys...Command+i--->
    Press the Option tab--->
    Check the box Volume Adjustment...Set the volume to your liking.
    or set it to 100%
    If you want to do all the podcast at one time. Choose all the podcasts at one-time. You can do the same with movies and music too. If you want to adjust the volume to a select few in you library, Seclect All--->Option key and click on the podcasts (video, music) that you want to deselect.

  • Dv2 1030ea model volume not loud !!! Need solution

    My Volume controls are on max setting but sound is not very loud in my dv2 1030ea. I have checked with different software's to play music / video (VLC, real player, windows media player) but nothing is audible more than 3 feet from my laptop.
    Recently we upgraded to Windows7 home premium from VISTA, but still facing same problem.
    Do we have any software to improve audio booster software to fix this problem ?
    Please help me to fix this problem. thanks in advance
    Dilse...

    Just to save the OP from searching:
    I haven't managed to downgrade my N200 from .5.0 or later to .2.0 or earlier successfully and haven't heard of anyone who has. A shame really as the reason most people want ot downgrade is to get the original volume scale back, and that was a change that Creative didn't tell us about so we had no control over and no idea that it would happen.
    PB

  • IPad speaker volume not loud enough

    It seems to me that my iPad (latest model / software as of this date) speaker volume could be louder.  Other family members have the new Mini's and they have much more volume, as do our iPhones.  Is there a way to increase or improve the speaker volume on the iPad?
    Thanks!

    I have yet to receive my ipad 2 yet, but I'm sure the physical design of the case has something to do with it.
    The ipad 1 emits to the side, where as ipad 2 emits toward the back. Movies have a very dynamic volume range compared to music, and I've found even on the ipad 1 that the volume could be louder, especially if there's existing ambient noise.
    If I didn't have my earbuds, I would cup the speaker with my hand to direct the sound foward... not sure how well that would work with the ipad 2.

  • Zen Nano Plus volume not work

    About 3 months ago the button used to increase the volume on my player became stuck and wouldn't work. Since then I've been especially careful not to press the "decrease volume" button on my player. Unfortunately, today my luck ran out because while it was in my pocket the button got pressed and the volume has gone all the way down to 0 and I can't get it to go back up manually. I was wondering if there is a way for me to fix the volume via the software that came with the player or if I need to have it fixed. (That or throw it out since Creative doesn't have a phone number for technical support like a decent technological company). Thanks for any help!

    Hi,
    Try running the firmware update for your player to see if this hel
    ps.
    If the issue persists, you can contact Support for futher assistance.

  • Call volume not loud enough!

    When I make/answer calls, I can barely hear the other end, only when im in a quiet room is it perfectly clear...also when i am listening to the ipod part, when a call comes through I realllllly cant hear the caller. is there a setting I can adjust? Or is it my phone thats acting up? I just got it last week!

    I am having similar problems with my phone, mostly just when using the earphones/mic that came with the phone. Don't have any solutions yet, just wanted you to know there are others having similar problems.

  • Does the iPhone 4S volume speaker is not loud?

    Doed the iPhone 4S volume speaker is not loud?

    If you are asking for the relative volume of the speaker, it should be loud enough to make calls in a quiet to moderately loud room via speakerphone or otherwise.
    If you are asking if it is normal for sound to only come out of one side of the speaker at the bottom of the phone, then yes. One side is the speaker, and the other side is the microphone.

  • Nokia 5800 volume is not loud. Help

    Hi Ive been using this phone since July 2009 and I loved it. Lately ive noticed the volume (when you answer the phone and you put the phone next to your car) is not loud despite me setting it to max. Before, it would be so loud the person next to me could hear it. I thought it was other caller's phone that is messed up. I dialed my voicemail and the volume isn't loud.
    Anyone experienced this problem?

    Check out this video:
    http://www.youtube.com/watch?v=6VvD4rOJldo
    Basically, if you put your hand, or another flat object behind the speaker, it will reflect the sound toward you and make it sound much louder. A Post-it note is probably the best solution (as in the video), since it stick on.

  • Zen mx 16gb player not recognising id3 tags.

    ,zen mx 6gb player not recognising id3 tags.I recently bought a zen mx and so far can not get it to recognise over half of my mp3's id3 tags. All of the files are drm free. All of the unrecognised files will play but get stuck in the unknown artist unknown album catagory on the player. I have tried retagging the files in several diffrent tagging softwares and upgraded my player to the newest firmware and nothing seems to work. I had a creative vision m 30gb before I had this player and it never had this problem. I contacted customer support but they didnt seem to have any idea what an Id3 tag was and offered no relavent advice other then upgrade your firmware witch was upsetting to say the least. If anyone has any idea how to fix this that would be awesome. I feel like I just wasted almost 80 dollars.

    0Re: zen mx 6gb player not recognising id3 tags. It's just aggravating because I used to talk the company up all the time. The older creative zen's where awesome. They played every file that I had with the exclusion of open source formats like ogg witch is understandable because I'm sure that there is not much demand for that.
    I wouldn't be half as upset as I am if I felt like the support people where offering decent suggestions or even an explanation of what may be wrong. I mean are there certain id3 tags that are not recognised? At least try to explain why it may not work to me so that I can fix the problem without having to re-tag every cd that I have purchased since I was fourteen. I don't think I'm going to buy anything from them again until I see that the quality of there products is getting better. Maybe I should write a review on Amazon to warn people away, after all the majority of the music that its having problems with was downloaded from Amazon.com.
    Btw if your haning the same problem as me kid3 is a program that will retag your files to this players satisfaction. Not that helps if you have a large volume of music but its at least something.

  • Song in my iphone 4 not loud enough when i play on the dock speaker.

    when i play song on my iphone using dock speaker the song not loud enough.. pls help.

    If your dock is connected to an amplifier/speaker system try this:
    With your phone sitting in the dock, try to increase the volume, using the volume control buttons of the phone. Set it to max and you should have more sound coming out of your speakers.

  • Sound Output on MacBook - Not loud enugh

    I've been using a MacBook for quite a while now and I've noticed that the sound output for programs such as Front Row is not loud enough to be able to use it from 10 feet away which is what the interface is about.
    iTunes volume levels are higher but not that high, all levels in System Preferences are set to maximum.
    Any suggestions or software to fix this issue???

    Hello,
    Most notebook sound devices usually produce hallow sounds and are normally harder to hear at higher distances. Your best bet, rather than to push the limits of the speakers, ( they aren't great ) is to hook your laptop into some external speakers made for this type of operation. I usually hook my Macbook up to the TV along with my home theater system when I am using Front Row. I highly suggest you do the same.

  • Home connect speaking volume too loud

    I recently purchased Home connect.  I have 3 bars of signal.  The speaking volume is so loud that the audio is breaking up and severly distorted.  We purchased new high end Panasonic cordless phones-same problem.  The corded phone sounds the same.  I went through the ##1 process and set the level to 1.  I think this changes the listening volume not the speaking volume.  It did not change the symtoms.  Not sure where to go from here.
    Thanks for any thoughts

    You are supposed to click on ChristinaB_VZW and then on the "Follow" button. This sends a follow request to Christina. She has to accept the request and send one back to you. Once you accept their follow request, then you will have the option to send them a Direct Message (DM).

  • Zen V Plus volume is lower compared to Zen Micro/Phot

    Hey, well I just exchanged my Zen Micro Photo for a Zen V Plus today because they were out of stock with Micro's. Anyway, I've tried putting the Zen V Plus to full volume and it doesn't even seem loud at all (which is bad). The volume restricter is off and so is the smart volume which both make it less louder if they're on. The Zen V Plus at volume level 25 sounds like Zen Micro Photo volume level 22/23. Has anyone else converted from Zen Micro Photo to Zen V Plus, or vice versa? I just want to know if it's just me noticing the difference, but I highly doubt it is.

    With the very strong possibilty of permanent hearing loss and the risk of Class Action lawsuits from consumers that have lost their hearing, it's going to be harder and harder to find a company that releases really loud players.
    I've got tinnitus and it never stops- I can hear the buzzing/ringing all the time, no matter what I'm doing. I've lost a lot of hearing response in the vocal ranges and it makes it nearly impossible to understand some people's voices.

Maybe you are looking for

  • Network Trouble - eth0 not interface for sis900 controller

    I'm not sure how to even state this problem, but I have gone through the guides a couple of times to try and find what I missed or some more enlightening information.  Currently, I get nothing if I ping google, or anything else for that matter. Here'

  • Baseline Date Issue

    Dear Experts, I am facing a peculiar problem. In the payment terms configuration i have mentioned Posting Date as the baseline date. The invoice is created in our company when the goods are dispatched. At this point only the invoice is made and accou

  • Understanding the RH Server Query String

    Hello - This is my first post in the forums. I'm technically a new RoboHelp user, although I've been prepping for our company's move to RH/RH Server for a year. I'm configuring my projects, layouts, and server areas for our migration and populating s

  • Mulitple items in a text field

    Hi all, I have a text field that I want to print the contents of an array in. for (int i = 0; i < rain.length; i++) {             arrayContents.setText(String.valueOf(rain)); I was wondering if someone would tell me how to get all items of the array

  • Cost not settled to AUC in last fiscal year

    Dear SAP Gurus, We have some WBSE's for which cost is not settled to AUC in last fiscal year. Now while moving the cost from that WBSE's AUC in Current fiscal year , SAP is not allowing us. So what will be method to settle the cost from those WBSE's