ZEN 4GB does not power on unless plugged with lapt

I bought a new creative zen(4GB) a week back.
I charged it fully for 5 hrs and then tested it by playing a few songs and videos.
I switched it off and tried to power it on after around 5 hrs but it did not respond.
When i connected it to the laptop again...it got powered on. After that i removed it from laptop and again played a couple of songs.
If i power it on after short intervals...it works...but if i power it on after 2-4 hrs it does not power on unless docked to the laptop and this is a recurring feature.
Please, respond in case someone has faced such a thing or could give some idea.
Thanks.

I would use recovery mode, do a format of the player and then upgrade the firmware if you have not already upgraded. The format eliminates any possibly corruption (which can cause shut down and battery performance issues) and it also resets the player settings... the later firmware versions definitely have better battery and charging performance in my experience (current for the ZEN 2/4/8/6/32 is .20.02)
If it still happens after that then it may be a defect. It does happen - and support can help you get a warranty replacement in that situation. Even though it seems like the forums are always flooded with problems you have to keep in mind the massi've number that don't have any issues and never have any reason to visit here (so in other words keep the chin up, if you do have to get a replacement don't panic).

Similar Messages

  • Ipod does not power up unless plugged in

    My ipod touch does not power up unless plugged in or connected to the computer.  It is fully charged and when I unplug from the power outlet or computer it will stay on for a minute and then turn off again.  It only shows the apple icon when I try to turn it on unplugged and then turns back off.

    Likey the battery is dead.
    Try the following to rule out a software problem
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • T440s will not power on unless plugged in

    My T440s will not power on unless the power adapter is plugged in.  Once it has powered on, I can unplug the power cable and it will stay on.
    Needless to say, this is not an optimal situation for a laptop.
    Please tell me there is a fix, and that it does not require shipping my laptop back to Lenovo again.
    Thanks

    So, I believe I have the same or similar problem. What I think is happening is the internal battery shuts off when the AC power is connected. However, it doesn't reactivate and when you try to power from battery it won't work.
    These are two workarounds I have found that seem to work for me:
    1. Unplug the laptop before you shutdown. This switches to battery mode and activates the internal battery.
    2. Go into your BIOS and change your USB setting so that Always On is active when on battery. This will allow you to charge your phone or other device using the Always On USB and will keep the internal battery activated.
    Hope these things help!

  • Nomad Zen Xtra does not power

    I have just recieved my Zen Xtra today. But when I power it on, per the manuals proper instruction, it does not power on. I have also tried to charge the battery with the mp3 player both on & off. When I had it on the "using AC outlet" icon would show. It does seem I need a new battery. But I fear something else, could the charging mechanism be dead? This player is a refurbished product by the way. It works on the AC outlet, I can transfer files to it, and I can successfully connect it to the USB port. the hard dri've sounds fine. It seems I need to buy a new battery right? Where else besides Creative.com can I buy one? Thanks.

    First, read/try the advice here
    Failing that, I would suggest buying a replacement battery. Check froogle.com (that link is set to the best deals) for a good price.

  • New T61 will not power on unless plugged into AC Power

    Hello all,
    I am a new owner of a T61 laptop and so far I love it.  Though, I have found something rather weird.  I cannot power on my laptop with just battery power.  I have to plug it in to power it on.  From that point on, I can run off of battery power.  I have a 9-cell battery.  Once the laptop is powered up, it reads as 100% battery power.  I would really appreciate any ideas or tips that anyone may have.
    Thanks
    Ryan

    Sounds like a bad battery. We received a shipment of 30 T61's in which 17 of them had bad batteries straight out of the box. Exact same symptom as yours. You should contact your Lenovo or the store you bought your laptop from. Last year, Lenovo recalled defective batteries for T60s.

  • Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

    Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black.  Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything.  Looks like the screen is on it's just unresponsive and black obviously.  Has anyone had this problem?  I was updating via wifi right in front of my router and my computer.

    Spoke to a "senior advisor" in the Apple TV department.  Her suggestions:  change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers.  So she confirms that the problem is one of connection to router suddenly dropping out.
    My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue.  It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more.  Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
    My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department.  Make them aware of this problem!

  • Mac Pro 2x2.8 quad will not power on unless I unplug, then plug-in power cable, why?

    It is a 2x2.8 Quad Intel Mac pro, 8GB Ram, 8800 GT Video Card (running dual monitors), 10.6.8, Dual Internal HD (150/250), Single external HD (1TB), Dual Internal Burners (DVD - Stock/Blu-Ray - Pioneer), no PCIe cards installed.
    I installed a brand new power supply thinking that was my issue, but it still does not power on after an extended period (1/2 hour or so) of being shut-off. It also at times will shut itself off after periods of inactivity even though it is set to never go to sleep, nor are the HD's set to sleep when possible.
    One clue to give is that it IS set to restart after power failure. So when I go to press the button to turn the puter on and it is non-responsive, I then unplug and plug the power cable back in to the rear of the puter: it automatically starts-up as if there was a power failure.
    The other possible clue I have is that my bluray burner is connected via SATA cable to one of the 2 open SATA connectors on the Motherboard. It only has issues when the hard drives ARE set to sleep when possible. When they are awoken, the drive is no longer listed as present. Meaning I cannot open the drive drawer. ;(
    I am thoroughly upset about this.
    Benjamin

    It is a 2x2.8 Quad Intel Mac pro, 8GB Ram, 8800 GT Video Card (running dual monitors), 10.6.8, Dual Internal HD (150/250), Single external HD (1TB), Dual Internal Burners (DVD - Stock/Blu-Ray - Pioneer), no PCIe cards installed.
    I installed a brand new power supply thinking that was my issue, but it still does not power on after an extended period (1/2 hour or so) of being shut-off. It also at times will shut itself off after periods of inactivity even though it is set to never go to sleep, nor are the HD's set to sleep when possible.
    One clue to give is that it IS set to restart after power failure. So when I go to press the button to turn the puter on and it is non-responsive, I then unplug and plug the power cable back in to the rear of the puter: it automatically starts-up as if there was a power failure.
    The other possible clue I have is that my bluray burner is connected via SATA cable to one of the 2 open SATA connectors on the Motherboard. It only has issues when the hard drives ARE set to sleep when possible. When they are awoken, the drive is no longer listed as present. Meaning I cannot open the drive drawer. ;(
    I am thoroughly upset about this.
    Benjamin

  • I asked this about a week ago and didn't get any replies.. Please help.. My macbook will not stay on unless plugged in...

    My macbook will not stay on without being plugged in. I had my macbook for about 3 years and the battery had less than 200 cycles on it and the computer suddenly would not stay on unless plugged in (went from holding about 1.5 hr charge to not holding charge at all). I purchased a new battery and this battery has 118 cycles on it. It is doing the same thing. When I unplug it the computer shuts off immediately. It will not stay in sleep mode either. What should I do? I assumed that it was because I tend to leave the computer plugged in so that the cycles stay low, but after only 118 cycles? (and the new battery is less than 8 months old). Could my computer be failing to register the battery? Please help me - I don't want to have to spend another $80 on a battery. (Just so you know, I have removed the battery and made sure the connection is good but this did not help.)

    If your problems with the new battery are the same as the old battery, it would seem your Mac isn't charging the battery properly.
    Perhaps it's a Magsafe/charger issue.
    Read through the power section of this User tip here, try everyting, including the SMU Reset and see if that makes any difference.
    https://discussions.apple.com/docs/DOC-3046
    We can't do too much more than that as it seems to be a hardware issue and we can't fix that too much.

  • 8800 does not power on but shows the charging symbol! HELP!

    Hello everyone,
    I have been searching for days now across the web for a solution to a very bugging situation. A'las i am close to giving up. someone please try and help. So here is the problem: I recently bought a 8800 rim (branded for cingular/AT&T but UNLOCKED) from ebay powerseller with 100% rep. it was advertised in MINt condition.
    It arrived two days later and seemed in great physical condition.
    So i plug in the charger and let it charge for more than 8 hours. I try turning it on but to no avail. During the charge the screen goes dimly on and shows a battery with an electric bolt going through (I assume that means charging..).
    It initially seemed to me as a battery problem. So i took it to a local store and borrowed one of their batteries for 8800 and the phone started working fine also made a call with my temporary T-mobile sim inserted. (although their battery was also on low charge)---
    So i come home and with a new OEM 8800 battery. plugged it in and charged for like 4 hours and the screen goes on with the charging symbol but does not power on.
    I have repeatedly searched through the WWW and came across wide variety of dilemmas but none were any helpful. I also tried installing the latest OS...which also spectacularly failed [got an error that ...loading failed during the mult-load seesion...or something like that. I followed several very well written guides [advising that the manager and OS be installed on PC and etc.].
    SO I MAKE A DESPERATE REQUEST FOR HELP FROM ANYONE OUT THERE WHO CAN HELP. WHAT'S THE DIAGNOSIS WITH THIS BB. IT WAS ABLE TO WORK WITH THE BORROWED BATTERY FROM A LOCAL STORE..EVEN MADE A CALL AND EVERYTHING...BUT WITH THE BATTERY THAT CAME WITH THE eBay PURCHASE AND THE THE BRAND NEW THAT I BOUGHT....IT DOES NOT POWER ON.
    BESIDES HOW LONG SHOULD I BE CHARGING IF IT IS NEW OR IF THE PHONE HAS NOT BEEN IN USE FROM SOME TIME??
    THANKS IN ADVANCE.
    Please help ASAP.
    Mirza

    How are you charging the BlackBerry? Do you have a wall charger or are you charging via USB cable from your PC? Its also possible that the charging circut in your BlackBerry is faulty. This would explain why a charged battery works while your uncharged battery is not.

  • HT4061 HOW CAN I GET MY SERIAL NUMBER WHEN MY PHONE DOES NOT POWER ON

    ERROR 4005
    ALWAYS MAJOR TROUBLES WITH YOUR #@#@#@ UPDATE....
    Since I have done the update for IOS 7.1 my iphone 5S does not power on anylonger or more exactly remains stucked on the apple logo until there is battery...
    I am in europe right now and for 10 more days and I do not have phone anylonger.....
    I have tried to reset, restore.... connect on Itunes....
    Once the IPhone 5S is powering on by pressing both general button and the power switch more than 5 sec,
    It says please connect this iphone to Itunes for being restored,
    Once the procedure completed, extracted, loaded etc,
    then the iphone is shutting down for restarting,
    On itunes it says looking for iphone.... and you wait you wait you wait,
    the iphone is stucked on the apple logo and ?
    Nothing for then having a pop up saying "the iphone "iphone" could not be restored. An unknown error occurred (4005)
    Of course I cannot provide the serial # because my telephone DO NOT WORK !
    Nothing. so frustrating.
    The connection is made with apple chords and connected to my last macbookair... nothing strange.
    file:///Users/erikherve/Desktop/ERROR%204005.png

    Not sure why you need the serial # if you phone is locked.
    Plug it into iTunes, and you can get the serial #, and also unlock your phone.

  • T61p 14.1" Does not power up

    My 14.1" T61p Type: 8891-CTO laptop does not power up.
    After my last successful use, it was sitting idle for 2-3 days with battery & AC adapter connected. When I turned it on nothing came up, no battery charging light or display. I do not have mini/advanced dock.
    So far I've tried the followings:
    1.) Removed Battery & switched on with AC adapter (with & without circuit breaker)
    2.) Removed AC adapter & switched on with Battery
    3.) Removed HDD, RAM, DVD Drive one at a time & again used step 1 & 2 with no luck.
    I bought it new in Dec'07 & still under warranty. I have never used Lenovo support before but from what I've read, their on-phone support sucks.
    a.) Have you faced similar problem or know the solution?
    b.) Does Lenovo have any local repair center in NJ or NC where I can physically carry the machine & get it fixed?
    c.) What will be the fastest/sure-shot way of getting it fixed?
    Thank you!
    Warm regards,
    Hitesh
    Thank you!
    Warm regards,
    Hitesh P
    Solved!
    Go to Solution.

    Ok! It's fixed! I disconnected AC, removed the battery. Then, I took out / reinserted the MEMORY CARDS. As soon as I plugged in the AC, VIOLA!  Indicator lights were on.  I replaced the battery. I powered up the pc -- battery showed only 2% juice.  Moral of the story:  if you leave the pc in hibernate (prolly sleep mode too) for an extended period without plugging in, the battery will lose juice and the pc memory will remain in the previous mode, unable to register when AC is available.  Not ideal, but what I think that's what it is.  OR - someone else suggested that the PC needed a longer time to recharge after wasting all the battery juice -- and that I should've been more patient. But, the PC had been on the AC for 2 hours and no indicator lights were on, which made seemed to indicate that the PC was unable to register that it was attached to the AC power.  I needed to get some work done, so I was ready to try anything. When in doubt, take the mem cards out. And reset them.  
    Sayonara! 

  • My network goes off and does not come back unless I switch off and switch on

    I have a vodafone connection.
    Whenever I go underground while traveling in train, my network goes off and but does not come back unless I switch off and switch on the phone... any suggestions???

    I would advice to perform a hard reset (holding Power button + Home button for at least 10 seconds until Apple Logo appears)

  • 760GM-P23 FX does not power on

    First build in a while.  I just purchased a 760GM-P23 Fx motherboard.  It does not power on.
    I installed an AMD Phenom II X6 processor, and one 8GB DDR3 memory module.  Plugged in the ATX 24-Pin power connector to JPWR1, and the ATX 4-pin connector to JPWR2.
    Power supply does not turn on -- fan does not run.
    Disconnected both power connections, shorted pins 13+14, confirmed the power supply works.  Tried also with a spare power supply, neither works.
    The motherboard is sitting on a non-conductive surface -- a painter's tarp on the workbench.
    Is there something else I should try before returning to store for a replacement?
    Thanks

     Double check your connections to JFP1, are the case switches and LED(s) connected to the correct pins? Short pins 6-8 JFP1 with a small screwdriver or whatever as a test and see if PSU starts up.

  • DROID X DOES NOT RETRIEVE EMAIL UNLESS POWERED OFF, THEN ON

    I've identified through testing and confirmed that my 3 day old Droid X does NOT actually retrieve email from a third party (non Google) mail server WITHOUT having to power it down, then back up first.  Activating the cute little manual retrieving spinning circle, in fact, does NOTHING.
    I have tested this a MILLION times after not getting emails.  MANUAL or SCHEDULED settings absolutely do not work.
    I REPEAT, I do not receive  email unless powered off then on
    I set the the following to no avail:
    * battery profile to "Performance"
    * Data Delivery settings to "Background data" enabled
    * Data roaming to enabled
    * Email and Corporate Synch settings/Email delivery settings "Data Push" to enabled
    * "Fetch Schedule" to EITHER "15 minutes" or "manual" (either of which shouldn't matter if Data Push is enabeled)
    * Sync over WI-FI Only is disabled 
    Not retrieving email is critical to my business- I use a device for email more than I talk to anyone.
    This constitutes a breech of service unless it is immediately rectified.
    My Droid X was delivered as the following;
    Version 1.13.604.MB810.Verizon.en.US
    Firmware 2.1-update-1
    Baseband Version BP_C_01.04P
    Kernel Version 2.6.29 w30471@il93lnxdroid08 #1
    Build Number VZW
    ERI Version 5
    PRL Version 51926

    DincX110 wrote:
    I Have had this Happen more than once Now i'll Be using my Wi-Fi Then when i shut it off on the X  it does not want to Re- Connect with the Network at all.   An i'm wondering if its beacause of a setting that i may have it on or maybee an App. Causing this issue
    Has any one experienced this on there X 
    Now when i shut the X off an do the restart it's back on.
    I don't use WiFi very often (work doesn't allow non work computers to connect, and at home I use my laptop), but I find at work that my phone sometimes doesn't want to connect to the Network when I walk into the building from the parking ramp (very spotty service on the ramp).
    What I do to correct this without restarting, I turn on 'airplane' mode until I see the little airplane in the notification bar, then turn airplane mode off. Within a minute, the network is reconnected and working in 3g just fine.
    Location is also part of the problem. I work on the first floor of the building. They are doing remodeling on my floor right now, so I am now on the top floor and have not had this happen since the move a month ago. Since my floor is below a hill with another building on top of the hill between my normal location and the closest tower, the line of sight is hidden, so I expect small problem with it. It doesn't happen all the time, but I do notice it when I try to run internet radio at work.

  • Playbook shut down and does not power on anymore

    My playbook shut down while reading an email and does not power on anymore. Any idea how to fix this?

    Try holding power for 20seconds. This will do a hard reboot ofthe device. It's was also mentioned that sometimes leaving it plugged in for awhile can help.
    - If you like my response/post, or it helped you find an answer you were looking for, please provide a Kudo - white star to the bottom right of this post. -
    - Please use the search bar at the top, or check out the PlayBook FAQ's for help getting started -
    - Hockey DrillBook -

Maybe you are looking for

  • Layout issue in Oracle rdf

    Hi Experts, I am facing a strange issue in oracle rdf reports. Requesting an assistance from you. I have a report which displays the vendor information. For all the vendors the layout is working fine for me, but for one particular vendor the vendor n

  • Cannot Get My Time Machine To Back Up With Maverick

    Hi Every One I have a 1TB TM and it has been working fine with my 1TB Mac Intel until I installed Maverick.! I could not get it to work so I formatted the TM and reset it as if I was starting again from new. So the TM starts ok with no issues (I have

  • AD FS Token issuance endpoints for Windows authentication fail to open

    Hi, I have had issue with AD FS and after turning tracing on, I realized that the AD FS endpoints to issue token based on windows authentication were all failing with an error like: A WS-Trust endpoint that was configured could not be opened.  Additi

  • ADF BC - easier change of linked attr name

    Hello JDev team, please make changing of a linked attribute name easier, for example through refactoring. "Linked attr" means that the attribute is a part of a association or a view link. Now it is not possible to change it without changing/deleting

  • How to ...safely... remove CSS and deactivate TPM?

    This question follows on to my reviving my motherboard from the dead. Having replaced the visually-defective caps on the MB and had it reboot, it's now been running for some weeks. I have no need for the fancy security on the machine. It's used for a