ZEN 6.5 and Win 7?

Should ZEN 7 be able to take and restore an image of a Win 7?
I took an image of a Win 7 machine then tried to restore it to another machine with the same hardware, when Windows boots I get an error:
status: 0xc0000225
info: The boot selection failed because a required device is not loaded
I'm pretty sure on the master machine the SATA mode was set to AHCI (I don't have the master with me now), the second machine was "Native IDE", but when it wouldn't boot I tried changing it to AHCI, same issue.
Any ideas?

Nope, It can't.
However, You may be able to use a ZCM10 Boot CD from against your ZDM
6.5 Server to create and restore images.
No promises, but the imaging engines are close enough that it may work.
On 6/15/2010 10:06 AM, jdwall wrote:
>
> Also, when I open the image with Image Explorer, there are 5 partitions.
> I know Win 7 create a 100MB utility partition, and I created 3
> partitions myself, but there is a 5th which is empty and Image Explorer
> says is parition 4. Wierd.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

Is it worthy to buy a Zen with 2Gb and a SD card of 4 or is it better to buy a Zen with 4

Hi.
I'm thinking on buying a Zen, but i'm a bit confused on the issue of if is it better to buy a Zen with 4Gb or a Zen with 2Gb and a SD card with 4Gb, because the diference on the pricefrom the 2Gb to the 4Gb fits a SD card with 4Gb, and will result in a Zen with 6Gb...
Does the zen works fine with the reading times of the SD cards? Or does the performance drops when reading from the card?
I would apreciate your experience/knowing opinions.
Thanks
BM

Ask that question here.http://epizenter.net/e07_plugins/forum/forum.php

I am trying to setup air print with a canon PIXMA iP7250 and win 7 64bit

I am trying to setup air print using a canon PIXMA iP 7250 printer and win 7 64bit

Did you read the instruction manual?
http://www.canon-europe.com/Support/Consumer_Products/products/printers/InkJet/P IXMA_iP_series/PIXMA_iP7250.aspx?faqtcmuri=tcm:13-982915&page=1&type=faq

RE: RunCommand and Win 95

Actually, NT just renamed the mapping layer for WOW
type cmd /? to see the same (more) options on the NT interpreter
and command.com /? for the MSDos command interpreter
-----Original Message-----
From: Tim Sawyer [SMTP:[email protected]]
Sent: Wednesday, April 14, 1999 11:32 AM
To: '[email protected]'
Subject: Re: RunCommand and Win 95
On Wed, 14 Apr 1999, Daniel Nguyen wrote:
Hi,
You can not use Copy command on windows : it is a Dos command. So you
should make a
bat file and launch it with the runcommand for instance.Or use command.com with appropriate parameters. (sorry, I don't remember
exactly, and I have no DOS based machine here ... :)) )To run it using command.com, I think you need to run
command /ccopy <source> <dest>
(the /c specifies the command that you want to run)
but this will not work on NT, cos NT doesn't have a command.com. This
doesn't sound like the right way to go about doing the copy though...
Tim Sawyer
PanCredit
Leeds, UK.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Christina,
Since you are in a mixed environment, you should avoid using the operating
system commands for portability reasons. You can use the -fns option on
the ftexec command which allows you to override the environment/registry
variable FORTE_NS_ADDRESS.
Example: ftexec.exe -fns computername:portnumber
Hope this helps in your situation.
Doug Laures
Senior Technical Consultant
Claremont Technology Group
Columbus OH
To: forte-users @ Sagesoln.com
cc: (bcc: Douglas Laures/Central Region/Claremont)
From: BuPEDV @ compuserve.com @ INTERNET@INTERLIANT
Date: 10/15/97 07:11:20 AM AST
Subject: Re: RunCommand and ftexec
Hello Christina,
try the task.part.OperatingSystem.SetEnv() - method befor you make the
start with RunCommand. in SetEnv you set FORTE_NS_ADRESS to server2:6000.
Because the RunCommand executes a new shell, the calling Apllication A
works with it's old adress.
Hope it helps.
Joseph Mirwald
EMAIL: [email protected]
Christina Tomacelli wrote:
Dear forte-users,
I have the following problem.
I have an application A that uses a certain environment (say Aenv, with
FORTE_NS_ADDRESS=server1:5000). This application executes at a certain time
a RunCommand and calls a "ftexec" which runs another Forte' application
(B). Application B belongs to a different environment (say Benv, with
FORTE_NS_ADDRESS=server2:6000).
When I call application B from application A, application B reads the same
FORTE_NS_ADDRESS which was set before start executing application A (that
is, application B uses FORTE_NS_ADDRESS=server1:5000, which is incorrect).
I can have mixed platform UNIX and Windows 95, so FORTE_NS_ADDRESS can be
an environment variable or a line in forte.ini.
Can you think of a workaround to this problem ?
TIA
Cristina Tomacelli
(See attached file: firma.txt)

Mac Pro -- Installing XP and Win 7 on a SEPARATE Internal Drive

I would like to install Windows XP SP2 and Windows 7 onto the second Internal Drive in my Mac Pro. I am planning to install Win XP on the first partition and Win 7 onto the second Partition of Drive 2.
Will this work?
Drive 1 - GUID partition Scheme -- 1 partition -- Snow Leopard
Drive 2 - MBR Partition Scheme -- 2 partitions -- WinXP -- Windows 7
Drive 3 - MBR Partition Scheme -- 3 partitions -- Linux
Drive 4 - MBR Partition Scheme -- 1 partition -- NTFS Shared Data
Can I use MBR or do I need to use GUID Partition Scheme on my second drive holding Win XP and Win 7?
P.S. I do not plan to use Bootcamp assistant to install WIndows XP and Win 7. I only will be using the Mac OS X Install Disk to install the Bootcamp Drivers.
And What does this mean in the Bootcamp Guide:
"Note: If your computer has more than one internal disk and you want to install
Boot Camp on a disk that isn’t in the first hard drive bay, remove the drives in the lower numbered bays. You can reinstall the drives after you install Boot Camp."
What does Apple mean by lower number bays? Drive 1 or Drives 3 and 4?
And why do I need to remove drives?
Rob

I thought it might be possible, and while you must use MBR, and while Windows 7 can install on its own without BCA, the same is not true of XP. People have tried, and the conclusion was a no go.
Don't know what Linux requires.
GPT is fine for data drives though, and is required when you get into drives of 2TB and larger.
As long as you format the drive partition table as MBR you are fine.
The only time when you used GPT you have to also use BCA to add the MBR and have a hybrid partition. GPT actually includes an "MBR holder" to prevent XP and others from wrecking havoc on GPT volumes that they don't support.
Never used XP, and for one purpose alone I just used XP Mode instead.
Apple tech notes are full of misinformation and support for Windows on their own Macs is sadly missing.
BUT: remove any and all drives that are GPT or have OS X during the install of Windows (both XP and 7). Otherwise it won't install. Then put them back. And if you want to play safe, then use the drive bay #1 at the front of the Mac for Windows, yes.
http://developer.apple.com/technotes/tn2006/tn2166.html
http://www.microsoft.com/whdc/device/storage/GPT_FAQ.mspx

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk

After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.

Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?

Is fox 35 and win. 8.1 and theAMD A8 compatable ?

Have loaded and uninstalled fox 35 several times----no error warnings---set fox for default-----but the result is a Franken browser part Explorer 11 and part Fox 35 and not usable . On the 1st uninstall Explorer 11 vanished but it's still there---when I reload Fox it's the same Franken browser and I found Exp. 11 when I tried ''new internet connection'' it seems 11 is already running but not showing any longer on desktop or in programs but it is intact and not a franken browser. Is there conflict with using Fox 35 and Win. 8.1 and the AMD A8 ??

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Adobe products under OS X and Win XP

Can anyone give me a comparison of the performance of Photoshop,etc. when running them under OS X and Win XP (boot camp of course on the same machine).
I'm assuming CS2. Just raw performance...I will have to factor in the time I would save using the awesomely productive OS X and clunky old XP.
Thanks!

sonicsoul,
Up to now there's a HUGE difference of speed and performance with Photoshop CS2 between XP and OSX. The thing that makes Phosothop CS2 slower on MacOS X (Intel CD) is that the app is created for PowerPC, so running Photoshop CS2 (or any other app that's not yet Universal) with Rosetta, will make the app work HALF speed as on a PowerPC one. On windowsXP it works reaaaaaaally fast. I'm gonna use it till Adobe launches a Universal version. And I suggest that you do the same.
Hope that answers your question.

I have recently bought a zen touch (20gb) and need help putting music on

I have recently bought a zen touch (20gb) and i can't figure how to get music from Creative media Source to my Zen. I know how to select all tracks (i have 745) but i can't find the transfer button. If someone could help me it would be greatly appreciated.

You can use either the left arrow or the right arrow to transfer, depending on whether you view the content of your MP3 player on the left or on the right. Creative MediaSource is so fliexible that it offers you to view your different music sources in different panels. Apparently, you you may not be aware that you can view the content of your MP3 player in the right panel. Just to to the View Menu and you can select what you want to view in the right panel.

Printing from Adobe Reader X with HP UPD PCL6 ver 61.107.4.8232 and Win 7 x64

Hello,
I have a Windows 2003 32-bit server with HP UPD PCL6 driver, version 61.107.4.8232 installed for several HP P4014dn printers. I'm running into an issue printing from Adobe X on Win 7 x64 machines. There is a delay of about 5-10 minutes, per page, before the job is spooled and printed.
Any thoughts on why this only affects Win 7 x64 machines? Printing works without any issues on Win XP and Win 7 32-bit machines.
Thanks in advance.

This is true when printing a .pdf file opened thru IE and a saved .pdf file.

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation. In OSx boot it keep Win keyboard. How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

My MacBook Pro keyboard not working correctly after Win7 bootcamp installation.
Installation went well but when I boot either with OSx or Win it always keeps Windows keyboard.
How can I have Mac keyboard in OS boot and Win keyboard in Win boot?

Hi - I have the exact same model as your MacBook and had a few questions as mine is acting up. I upgraded the ram to 8gb (2x 4GB ram) and ever since then my computer has not been running as smoothly and the start up time is horrendous. Have you encountered this problem? And if so how did you fix? What would you advise me do?
I was thinking of reverting back to the original factory 4GB then rebooting the entire computer. Any suggestions?
Thanks in advance!
Allen

Memory violation / segmentation fault at k3b, kdenlive and wine

Hello, i cant run k3b, kdenlive and wine.
When i try to run some of listed apliactions i got segmentation fault.
Here are some logs:
strace k3b
http://wklej.org/id/350797/
valgrind k3b
http://wklej.org/id/350806/
strace kdenlive
http://wklej.org/id/350801/
valgrind k3b
http://wklej.org/id/350807/
I launched Wine separated version installed by PlayOnLinux, and just made a bash script in /usr/bin/wine:
#!/bin/bash
/home/webnull/.PlayOnLinux/WineVersions/1.1.44/usr/bin/wine $@
And wine runs from /home/webnull/.PlayOnLinux/WineVersions/1.1.44/usr/bin/win using /usr/bin/wine but this is not a solution, its just a shortcut to other installed wine.
@edit
SOLVED: BUG IN GLIBC 2.12-2 OR BINUTILS 2.20.1-3 JUST DOWNGRADED THESE PACKAGES USING http://schlunix.org/archlinux/core/os/
-- WebNuLL
Last edited by webnull (2010-06-15 14:31:49)

Here is some additional information that may or may not be of any relevance. I do not know.
On the old server, I compiled the code with the compilation commands: f95 program.for
I was able to compile and execute code with small, medium size or large arrays (with or without the additional -openmp flag).
If I repeat the same command: f95 program.for
on the new server, I get the following compilation error message for programs with medium size and large arrays:
In function `newmaxmalecor':
/mnt/ide0/home/gustaf/education/programming/cesprod100//chicago.for:4340: relocation truncated to fit: R_X86_64_32 against symbol
If I compile with the additional flags: f95 -xmodel=medium -m64 program.for
on the new server, there are no compilation errors and I can run the code in sequence.
However, when I compile with
f95 -xmodel=medim -m64 -openmp program.for
on the new server, compilation works, but I cannot execute the code with medium size and large arrays.
The programs for which I have to add the "-xmodel=medium" flag on the new server to be able to compile the code and run it in sequence, are exactly the ones for which I get segmentation faults when I introduce the openmp flag and try to execute the code in parallel fashion.
Is this just a coincidence?
Lage

I own a Zen Vison: M and am wanting a speaker system for my player

I know there aren't any docking speaker systems for them yet, and I honestly doubt there will be any real soon.
So what would be the best way to go?
My X girlfriend had an I-Pod (poooo) and she had this speaker system.
http://www.alteclansing.com/product_details.asp?pID=IM7
Honestly that thing would be the only reason I would go gay for I-Pod.
What would I have to do to get something close to that?
A dock: http://us.creative.com/products/prod...7&product=4485
Speaker System: http://us.creative.com/products/prod...7&product=4097
Wireless remote?:http://us.creative.com/products/prod...Specifications
The wireless remote confuses me becuase I swear the other night it said it suppotered the Vision: M and now it just says the Vision.
I've also found this, The Player Dock http://us.creative.com/products/prod...5&nav=features
But would it be compatible with the wireless remote?
It's so hard being a creative customer, There aren't any worth while accessories yet.
Anyway, if anyone could help me that would be great.

Hi There,?I just bought my Zen Vision M yesterday and so far I'm very happy with it. I had a Toshiba Gigabeat S30 first but the battery was horrid (seems to be very close to the Zune in design and features etc)?then I swapped for an 80GB Ipod video but there is a massi've problem with the EQ settings wanting to clip passed the digital headroom (google "ipod distortion")?Got The Creative Zen Vision M and I can say the following so far:?The sound output is strong and powers my $200 Sony in ear headphones with clean power even with bass all the way up. It's got a custom 5 band graphic EQ which works well to customise the sound to how you want it (I hate the standard MP3 EQ options of most players)?The sound quality is Very Very Good. (I'm a Hi-Fi freak and a competent home recording engineer)?I can see the screen easily even on a hot bright sunny day outdoors on 50% brightness (Very useful)?I have a couple of MP3's that were converted from WMA's and on some players they dont play but the Creative plays them fine. The use interface is easy to navigate but not quite as good as the Toshiba Gigabeat but looks nicer. The FM radio is great sounding aswell which is a bonus and you can custom name the stations. You can set photos as wallpaper and it comes with 6 player skins to customise the look. Battery seems pretty good. when its not locked the screen goes dimmer instead of turning off completely but the battery still seems to last ok. (if you lock it though it will last even longer.)?I haven't found anything bad about it yet. Toshiba Gigabeat S30? 5/0Apple Ipod Video 80GB? 2/0Creative Zen Vision M?? 0/0 so far?hope this helped.

Zen Vision: M and .AVI Fi

So, the official site says it cannot support it but it is odd that the Zen Vision can support it whereas the Zen Vision:M can't. So I would like to know if DivX .AVI files are supported by Zen Vision: M and if I am going to use my Zen for a mix of Music but also for video what yould you reccomend, Zen Vision or the Zen Vision: M.
Thank You,
The Demanding Consumer

Vision or Vision:M
Yes, the vision:M plays DivX files:
Supported video formats: MPEG/2/4-SP, WMV9, Motion-JPEG, compatible DivX 4,5 and XviD
The Vision is designed primarily with video in mind, with its 3.7" screen. If you plan on watching videos (30 minutes+), then I suggest the Vision. The 2.5" screen on the Vision:M is good for watching short clips but, even with my eyes, it is hard to watch it for long amounts of time. Granted, the Vision is a bigger player with a bigger price tag, but has features the Vision:M doesnt. For good reviews of both, check www.cnet.com. Both are great players, and youll be fine with either.

HT4367 I have tried to restore my Apple tv (gen 3 and win 8.1)

I have tried to restore my Apple tv (gen 3 and win 8.1) according to the Apple description but it fails. I have tried three different usb cables with no luck. iTunes does not seem to recognise that i have connected the Apple TV via usb. Any suggestions?

See: "If your Apple TV still does not respond or if you were unable to follow the above steps" here > Apple TV (2nd and 3rd generation): Restoring your Apple TV

ZEN 6.5 and Win 7?

Similar Messages

Maybe you are looking for