ZEN 8GB - Not recognized in Windows Vista 32 Home Prem

My ZEN 8GB but it doesn't seem to work with Windows Vista 32 Home Premium.When I?connect it'sto?USB Vista says: "New hardware detected, installing?device driver".When looking at the status?(after a while) I get the message:?"Installing MTP-device failed".Finished!I installed the latest soft- and firmware but nothing.Are there more people with the same problem?Or anybody with a sollution?

I found a kind of solution.On the Creative website (> downloads > left side) you can find the MP3 Recovery tool.After running this tool (and a second firmware update) my?ZEN was recognized by Vista.Problem solved!?

Similar Messages

  • Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

    Question
    better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
    Details

    As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
    Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
    In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
    (3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
    C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
    Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
    Flash Player \ #SharedObjects
    If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
    If the value is blank, you could try inserting a sensible value and see whether that helps.
    Any luck?

  • Using my USB, my ipod touch is not recognized in windows vista or i tunes. It wont even charge. If I connect it to windows xp, it immediately charges up and it recognized. Any help would be appreciated.

    Using my USB, my ipod touch 2  is not recognized in Windows Vista or i tunes. If I connect it to my wifes Xp, ( where it was before) , it still charges up ( i tunes has been uninstalled. Any help would be appreciated. I have reinstalled itunes.

    http://support.apple.com/kb/TS1538
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Server not found by windows vista home version

    Hello, can somebody help me bei sign in on icloud? After log in I get "server not fount" Using windows vista home!
    What shall I do than?

    It could be a firewall or anti-virus software issue that is causing this. You can test this by temporarily disabling the firewall and/or anti-virus software.

  • My I pad is not recognized by Windows Vista

    My IPAD  and IPOD are not being recognized by Windows Vista.... Any suggestions?

    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: iTunes can’t contact the iPhone, iPad, or iPod software update server
    http://support.apple.com/kb/ts1814
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
    iOS: “Not enough free space” alert when trying to sync
    http://support.apple.com/kb/ts1503
    You may need to delete iTunes on your computer and then reinstall.
    How To Completely Uninstall and Remove All Traces of iTunes
    http://zardozz.com/zz/2008/04/how-to-completely-uninstall-and-remove-all-traces- of-itunes.html/
     Cheers, Tom

  • Windows Vista Home prem Sleep issues on macpro

    Hi all i recently purchased a Macbook Pro 15" 2.5 processor and duel booted it with vista home prem,
    (i use refit as my boot-up program)
    recently after using the vista side more often i've discovered that if i leave the laptop on and its idle it will go into sleep or hibernation not sure which one(i use a LED mouse which stays on during the laptops 'sleep' state), however i cannot re-awake the laptop from this state i usually have to turn the laptop off then on again, when entering windows after i have done this it says its recovered from a serious error and would i like to start in safe mode etc..
    i was wondering if anyone else has had this problem and knows a way to solve it,
    thanks all

    It is possible that even the latest Apple BootCamp 2.1 drivers don't handle the latest MBP hardware.
    Early on, hibernation was a problem for anyone on Vista, PCs as well as Macs.
    I have to unplug my mouse and keyboard when it goes into hibernation. When you restart in that manner, do you do a chkdsk or have any errors crop up as a result? I know on OS X side that can leave the disk dirty and in need of repair.
    PS: I thought you were talking about the desktop MacPro, not the MacBook Pro...

  • Windows Vista Home Prem SP1, iTunes 76, after install, refuses to launch

    I have just resinstalled Windows Vista Home Premium to a 1 yr old Acer 5610 laptop.
    Installed Vista SP1.
    Downloaded and installed latest (v7.6.something) iTunes and let it do the full, all apple media installation. It seemed OK, showed his music, let us reactivate the computer and loginto iTunes store.
    But now, one day later, when he starts computer, it refuses to lauch when iTUnes is clicked. just acts as if nothing was happening.
    So tried to uninstall iTUness and planned to do a reinstall, but now the uninstall has been running 30 minutes and seems to be doing nothing.
    Any thoughts on what is going on here?
    Should I force the uninstall by using a 3rd party Uninstaller tool?
    Should I download iTunes + Quicktime separately as EXE and run the installer again (I have downloaded it (57MB) to my Mac and plan to take it over to the Vista laptop on Monday when i am there again).
    Any other thoughts on why it worked once after the install and now has gone silent?
    thanks!

    Well that's weird that it quit working. Was that the first time the PC had been restarted since a lot of stuff got installed?
    The uninstall shouldn't take more than a min or so.
    Use the Microsoft Installer Cleanup Tool:
    http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
    Norton or other security software can cause that, there are several other reasons too...

  • Zen Xtra 30G Works with Windows Vista Home Ba

    I am writing this to help anyone who has experienced this problem. I don't know if this fix will work for all of you, on other versions of Vista, or if you have other firmware installed will not work for you. Note, since Vista was released Microsoft or Creative could have sent them updated drivers without anyone knowing. I have had Vista Home Basic for year now.
    After some tweaking, the Windows XP drivers worked on Vista Home Basic.
    I then use Nomad Explorer meant for XP to manage the MP3 files on my Zen Xtra.
    Firmware .20.08 30G Zen Xtra
    No Playforsure installed
    Vista Home Basic
    User Account Control OFF
    Here were my steps:
    Connect your Xtra to the PC running Vista.
    When first connected to Vista without drivers installed, Vista attempts to find drivers, if it finds them you'll be golden, but as I know there are no such drivers, if not it should return unsuccessfully.
    Download the latest USB drivers and 2004 Nomad Explorer from Creative's website.
    Run all as administrator.
    Right click properties to set to run these programs in Windows XP Service Pack 2 emulation mode.
    Install the driver, it will hang and time out, and some drivers will be installed.
    Install Nomad Explorer, if enough drivers were installed it will finish installation.
    Unplug the Xtra.
    Reboot.
    After Vista is booted, plug in the Xtra. It will now cause the driver to load, with a bizarre off sized icon. It will view files but you cannot open or access files. Media Player will try to boot and bomb, it cannot access files nor downloaded them.
    Now boot Nomad Explorer. It runs through the Xtra drivers. It will work like XP but look like Vista.

    Hi i tried the 3 posible solutions with not good results:
    - The driver from nomadworld is the same, so it didn't work either
    JB3_PCWDRV_US__26_02.exe
    - I tried to disable my antivirus, but I still get the same error at the end of the installation:
    "An error occurred while setting up the driver"
    - I saw the last reply about the device manager, but there's no Zen on the device manager, i had seen when a device have a error because of the driver, but in this case it doesn't appear anything.
    I didn't understand which .inf I need to modify, could yopu explain me more? please.
    May be is related to this, because my drivers path is "C:\Archivos de programa\Creative\Jukebox 3 Drivers", probably there's some path hardcoded in the installer.

  • Iphone 4 is not recognized by Windows Vista

    everyting was working great! iTunes recognoized the phone, synching was fine then...
    the iphone is not recognized by Vista, no drivers are present in Device manager and the iphone does not even USB charge when plugged in to the PC.
    I've reistalled iTunes but the drivers still do not show up.
    I've tried to find the drivers on the Apple site but cannot find them.
    Help!

    I have had the same problem two times with two different iphones (3gs and 4). After spending more than 1 hour on the phone with apple support, the only thing that worked was using windows xp on another computer to update ios. The funny thing is that when updating to 4.1 I again used Vista and it worked. I suspect it is a firewall problem but don't know how to solve. If you update using xp you can go back and return all your apps, photos, etc from Vista, just make sure you backup before using xp.

  • IPhone not recognized by windows vista 64 bit

    Hello, I use vista home premium 64 bit and I used to be able to sync both my iPod shuffle and iPhone 3GS in iTunes.
    My pc does not recognize either device and there seems to be no USB mass storage device in device manager.
    I have reinstalled iTunes , updated any drivers and such with no luck.
    I have reinstalled vista and still can't get things to work.
    Both devices are recognize by all of other pc I have access to such as a friends , work pc , moms laptop, etc.
    Those pc use either xp or windows 7. Maybe it's just a vista issue but as I said before. It used to work just fine with vista.
    I am at a loss as to why my own pc won't recognize these devices.

    Also, See Here for Device Not Recognised
    http://support.apple.com/kb/TS1538

  • My iPOD touch is not recognized by Windows Vista

    My iPOD touch shows a USB cable pointing to the iTunes logo.  In addition, my computer doesn't recognize my iPOD.

    iOS: Device not recognized in iTunes for Windows
    Then restore via iTunes.
    iTunes 10 for Windows: Update and restore software on iPod, iPhone, or iPad

  • Iphone not recognized in windows vista

    Windows Vista 64 will not recognize Iphone in itunes; i have updated to most recent itunes version, switched cables, switched usb ports, turned off virus protection. Error message is windows could not load the installer for wpd

    I'd like to add to my previous post that I just tried to completely remove and reinstall:
    *- iTunes*
    *- Apple Software Updater*
    *- Apple Mobile Device Support*
    as from article at http://support.apple.com/kb/HT1923, and I made a full restore of the software (firmware) on my iPhone, but Vista still doesn't recognize the iPhone as a camera or any other kind of portable device.

  • IPod is not recognized by Windows Vista - possible solution

    During the past couple of weeks that I faced this problem I found out that a lot of people had the same question as I did.
    Here is a possible solution.
    I have HP Pavilion laptop with Windows Vista. After I connected my new iPod – it didn’t show up in My Computer as a new device and in Device Manager it was listed in “Other devices” with a question mark next to it. I already had iTunes installed – it didn’t show up in iTunes. On the attempt to reinstall the driver I had a message that the driver was found but an error occurred while installing it.
    Here is what I did:
    1. Install iTunes (it has iPod driver for Vista in it).
    2. Turn on iPod and connect it to computer.
    3. Restart computer with iPod turned on and connected to computer.
    4. On the start up the computer will begin automatically installing the driver and the message will appear in the corner that new device is being installed.
    5. After it has been installed – check My Computer – you should see it listed there.
    6. Run iTunes and configure iPod.
    iTunes might run a little bit slow when configuring iPod for the first time.
    Good luck.

    if only this fix worked for windows xp or even 2000 (at my job)
    insane, but it IS a driver/usb problem i now know, at least i've gotten that far.

  • Ipod touch not recognized in windows vista.

    When i connect it, it doesnt charge, open itunes, and i can't even view the files on my computer. Ive tried many of the similar discussions in itunes support but it still has the same problem. I've tried reintalling itunes, updating ipod, restarting it, and so on... can anyone help? thank you

    i tried to update the driver like it said in the link u sent me(i have windows vista) but when i was going to update it it said "windows found driver software from your device but encountered an error while attemting to install it(ive tried a few times with the same result) This device cannot start.(Code 10)" and after this i was forced to close the program

  • Ipod not recognized my Windows vista or itunes

    I have an older click wheel ipod (2004) and I recently got a new computer with vista. Since then I have not been able to sync my ipod because it does not register as being connected. All of the songs I had on it worked just fine through the head phones and the dock, and so in my desperation (following the 5 Rs) I tried to restore it. I synced my ipod with a mac and it restored just fine, then I synced it with my pc and it actually recognized it?!! I went through the restore, and that worked, but I could not transfer songs to it. I just went from having a mostly working ipod, to one that seems to work with no songs on it. Arrgh. Any suggestions?
    Thanks.

    Do either of these help?
    iPod missing in "My Computer" or in iTunes for Windows
    iPod shows up in Windows but not in iTunes
    Is the software up to date?
    iTunes
    iPod Updater
    Updating iPod's Software
    Also, if you have a 4G iPod, why post in the iPod nano forums?
    btabz

Maybe you are looking for

  • Show Column Data In One Row

    Hello, Tell Me how i can show a single column data in one row. 10 20 30 To 10,20,30

  • List of issues to gain IE compatibility

    I am trying to figure out what I need to do to make an iWeb site compatible with Internet Explorer (say, version 6 and above). From reading the various information, here is my list: 1) Change all PNG files to JPG (because if a PC has JS disabled (def

  • Problems with the background image in IE

    Hi I've been optimizing some pages for the different browsers in Dreamweaver CS4. They all work fine in Safari, Firefox and Opera, Internet Explorer is, however not showing the background image I have selected. I can't for the life of me see what's g

  • ABAP consumer proxy generation for xMII WSDL's

    Hi friends, I have a question related to generation of consumer proxies in ECC Box. I am trying to create a consumer proxy for xMII WSDL's using URL method. For the first WSDL, I was able to create a service consumer proxy successfullly. It created w

  • What is CPU cost?

    dear all what is CPU cost in execution plan? thanks john