Zen Jukebox Xtra 40 gig - out of space error messa

I have 2000 tunes on my Zen and I'm trying to get them in a music file on my notebook. AT song 500 or so I get an error that there is no room left to continue. I have gigs of space left? Using the old Mediasource. Mediasource 5.0 doesn't work with this MP3 player. Never had issues before. Anyone hear about it not allowing you to get all your tunes onto a hard dri've?

Well, after reading the "headphone jack?" thread below, I think that's probably my problem, like so many other people. It seems like I was sold a defecti've product. And now I'm out of the warranty period. So that means, short of organizing a class action, there's nothing I can do, other than foot the bill for fixing a problem created by the company that sold me this product. There's something not right about that. Wish I could say I'm surprised. Goodbye, Creative.

Similar Messages

Zen jukebox Xtra hard case/cassette adapt

Hi there-
I just got my Zen jukebox Xtra and I'm really enjoying it so far.
There are two things I'd really like. A hard case to protect it and a cassette adapter, so I can use it in the car. When I looked for accessories here at the Creative site, all I saw was an adapter for the larger model. Can that be used for my version?
Also, does anyone have a hard case and what brand/where did you get it's
Thanks so much for the help!

I'm about 75% sure the casette adapter at the creative store will work with the Zen Xtra... if not, any other brand will work as long as you can plug it into the headphone jack. I use the one that came with my old Sony Walkman, and it works flawless.
As for a hard case, I found the case that came with the Xtra to be hard enough for my needs. This is the one that came with my Xtra.
There aren't many other cases out there for the Xtra. Vaja cases makes one, but it will cost you around $60.

Programs for putting music on Zen Jukebox Xtra 3

I'm going to be getting a Zen Jukebox Xtra 30GB for Christmas. I have already put all of my music on my computer using Itunes. Will I be able to put my music on the Zen Xtra using ITunes or will I have to put everything back on my PC using the software that comes with the Zen Xtra?

Poor Soul...
You will not be able to load any music to your creative device using Itunes. Your music can not even be in a Itunes nati've format (that is an issue that apple has caused by not licensing their format to others).
Unless there has been a change, your device will come with the "regular" firmware and you'll have to use creatives own software. If you want to use Windows Media Player to manage your device, you will have to update your devices firmware with the MTP compatible firmware. ::CAUTION - MANY PEOPLE HAVE LOST ALL USE OF THERE PLAYERS DOING THIS:: I happen to be a success story for the MTP firmware. I love it!!! For me, it was worth the chance.
If you decide to update your firmware, make sure you visit the windows update site and get every single update they have. Matter of fact, many updates won't even show until you have installed a previous update. So just keep going back until the site tells you MORE THAN ONCE that your OS is current. Just guessing, but I wonder if this is why so many peoples firmware updates went south.
I've had my 30gig Xtra for over a year and I am still madly in love with it. The new firmware made me fall more deeply.
Hope that helps!
markoutofthebox

SYSAUX out of space error(1688)

I am running the Beta version of XE and am getting SYSAUX out of space errors in the log. I've also got ORA-1688 unable to extend table SYS.WRH$_LATCH partition WRH$_LATCH_2458660294_3052 by 128 in tablespace SYSAUX.
Looking at the Storage screen in the Administration page SYSAUX is at 97.03% using 485.13 of it's 500 MB of allocated space.
Looking at the tables in SYSAUX it seems that WRI$_OPTSTAT_HISTGRM_HISTORY is taking a large amount of space. What is this table for? Can I clear it down?
Thanks,
Greg

Brad,
I just ran dbms_stats.purge_stats and passed it the current systimestamp but the size of WRI$_OPTSTAT_HISTGRM_HISTORY hasn't changed and the SYSAUX tablespace is still the same size.
Should I have run a different procedure? Or can I safely delete from the table myself (I'd rather not)

*searching for nomad zen jukebox xtra 40gb

[sorry if this has been posted before,,,?I got tired of searching]?Well. I've had this player for over a year so it's basically an ancient artifact. But. Last month sometime it went into a coma. I don't know why but it went into a "rescue mode" screen with the 4 options (clean up, format, reboot, reload OS). I tried cleaning up and rebooting and then I reloaded the OS. I figured, "Ok no problem, I'll just go on the Creative site and download it again and everything will be fine."?WRONG. I don't want to "Format All" because i'll lose everything and who knows if the OS will be on there?So since i can't find the OS here, anyone know where?I can find it'sMessage Edited by shamille on 02-03-200706:28 PM

i'd like to say yes... well that didn't work. I tried it on 2 different computers and it didn't work. I tried both of them. basically what happens is that when it gets to the point where your player restarts... mine doesn't. I restart it manually and then it says that the setup is complete... but this doesn't work. remember mine has all that jukebox xtra stuff in its name... :robotsad:?sorry for replying sooo much later.

Time Machine estimated space is wrong resulting in unexpected out of space error.

Hello,
I'm running Mountain Lion 10.8.2 on a Mac Pro with a 300 GB boot partition and a 485 GB data partition in a RAID-5 configuration. I have two 2 TB G-Drives attached via firewire for Time Machine backups.
As I understand it, Time Machine (TM) estimates the amount of space it requires to perform an incremental backup. If there is not sufficent room on the backup drive, TM selects a number of previous backups to remove to make space. The problem I've encountered is the amount of space TM estimates is much less then is required.
While TM is performing the backup, in TM preferences the progress message shows the estimated size slowly increasing until it exceeds the amount of space available on the backup drive and eventually leads to the error "The backup disk ran out of space unexpectedly."
I have reviewed the often cited link http://pondini.org/TM/C18.html. I have performed repairs on the two TM backup drives/partitions and on the internal data drive/partition and have done a verify on the internal boot drive/partition. There was one error on one of the backup drives which was repaired and all others passed without errors.
Are there any other steps that can be taken to determine the reason TM cannot accurately estimate the required space for a backup?
Thanks.
Nathan

After further testing the case ended up being not to do with any of the video codecs at all - somehow the audio was the problem. I tried a few different audio codecs which started working, but then suddenly the original started working as well. I'm not sure what exactly caused the change, but I figured I'd post as much as I knew in case someone else runs into similar problems. Look at the audio is my best guess, I suppose.

Version.bundle giving space errors

I'm having trouble with the Version device that was set up with FCS. Although there are 350 gigs of space available, I keep getting out of space errors. When I check a project in, it tries multiple times to copy it to the Version device, giving "error: E_FD, file write error, No space left on device" each time in the Log, and then giving an error of "Error: E_COM Error in comms channel to LDS (LDS did not complete request)" when the job fails.
If I turn off versioning, I can check in projects no problem.
I've checked permissions and added an edit in place URI to the device, as it is on XSAN. I can open up the bundle, and the subfolders allow anyone to write, but will only make files of size 0, as it thinks it is out of space. Any ideas?

Is the version.bundle located on the Xsan?
If so is that folder being stored on an Xsan affinity that has run out of space?
Nicholas Stokes
XPlatform Consulting

Zen Xtra 60 gig problem, help requi

hello
i have a nomad juxebox zen xtra 60 gig, and it has worked fine for several months.
recently, i had a problem that when i was listening to a track, parts of other tracks would interrupt the song, before switching back to the original song. this would only last for a second or so, and not all the time, rarely in fact
since then, and my current situation, the player when loaded up has gone into "rebuilding library" mode, and has seemed to fail in doing so, "firmware problem" has appeared on the screen and the blue light is on.
it doesnt do anything else until i turn it off.
so , can anyone help me? is there a way to sort this out?
thanks in advance

ste00 wrote:
i have already looked in the faq but cant find what im supposed to find,
The link is near the bottom of the FAQ and called "I have a "firmware problem" error". It'll take you to this page. You can of course use find and just enter "firmware problem" on the FAQ page.

Zen Xtra 30 Gig Firmware Problems! H

Ive had my Zen Xtra 30 Gig For a While Now, it worked just fine today. I thought I would update the firmware on it, so I downloaded the New Firmware for it, and Followed the Directions. And now it wont work!
"Before installing the firmware update, be sure that you have:Charged the player's batteryConnected the power cableTurned off your playerDisconnected your player's USB cable from your computerTo install the firmware update, you must first remove the firmware in your player using the Reload OS function:Press and hold the Play button, while inserting a pin or paper clip into the Reset button on your player. The Reset button is near the Volume buttons. The player starts up in Rescue mode.Select the Reload OS option. The current firmware will be erased from the player.Connect your player to your computer with the USB cable.Double-click the firmware file, and follow the instructions on the screen.When prompted, click the Upgrade option.When the upgrade is complete, your player restarts.A "rebuilding the library" message appears on your player's LCD. This message disappears when your player has finished rebuilding the music library. The firmware is now updated."
Ive done the "relod OS opition" and mow my Computer wont recognize my Player. Ive done the clean up option, and even tried a differnt USB port on my computer and it still wont recognize it. Its basically stuck in "rescue Mode". What Should I do? Ive got around 6 or 7 Gigs of Music on it so I dont really want to format it, But will a Format do the Trick for me?

I'm unsure what your problem is. Is it that your PC won't recognise your Zen Xtra when you plug in the USB cable? I had this problem and had to reinstall the device drivers here
http://us.creative.com/support/downloads/download2.asp?Product_ID=9288&dlcentric=00003&Prod uct_Name=NOMAD+Jukebox+Zen+Xtra&OSName=Windows+XP

Zen Xtra 30 Gig - No longer possible to shuffle within playlists after latest firmware upd

Not sure if anyone else has had this problem. After surviving the Windows Media Player /firmware update nightmare, my Zen Xtra 30 gig now will not shuffle within a playlist. Instead, when I select a playlist in shuffle mode, it shuffles through ALL the playlists. Any idea how to fix this?Thanks!

Same here! Are they going to fix this, or is there a workaround? I was thinking about killing it and going back to the older software...

Nomad Zen Xtra 40 gig...please h

I just got my Zen Xtra 40 gig today. The thing that's bothering me is that the player reads the ID3 tags of whatever they're called. Is there anyway I can get the player to read the FILE NAME insted, because most of my MP3's tags arent right. PLEASE HELP ME

Nope, the Xtra reads the tags. Why don't you fix them? Here's a great freeware that'll allow you to do just that. It's called MP3 Library, and you can get it here:
http://www.jumpingcholla.com/jce_trapper.htm
Good Luck

ZEN V PLUS - 4 gig - Only Holds 250 songs - Locks

I am able to transfer photos, songs, and videos. I can listen or view them with no
problem. The problem is the # of songs that I could get on the player is not right!
I have the Zen V Plus, 4 gig. I try to transfer songs to the player but it the
transfer progress always stops when there are about 250 songs transfered to the
player. The 250 songs are about 800 mb in size so that should bot be an issue since
the player is 4 gigs.
I have tried to drag and drop, add media, and use the "Fill Up Player" with the same
results.
Around the 250th song, the progress bar % stops moving. I press cancel and nothing
happens. I let the computer take it's time and 40 minutes went by... the bar is still
there with no new %. The problem is the player is still docked.
Since the player is docked and is still in "Transfer Mode" I have to unplug it, go
into recovery mode and "Clean Up".
When the player reboots the Re-Building Library is show with a progress bar. This
stays up and looks like the player is frozen.
I now have to reformat. All of my stuff is gone from the player.
I try to add songs and again... around 250 the progress bar sto
ps.
I used the Zen Media Explorer and Windows Media player to transfer the songs. All
stop around 250!
I have the new firmware installed.
The PC I have is:
Windows XP Media Edition
P-4
2 gigs of ram.
Again, I am able to upload songs, photos, and video and it plays no problem! The
problem here is I can't upload more than 250 songs. The total number of songs I want
to transfer is about 900 and is .2 gigs. The player is 4 gigs and there is a lot of
space when I transfer.
Thanks

Was just curious, was trying to establish whether it is a possibly DRM bug (on licensed) music or some other kind of bug with the unit. I have moved 450 songs total to my daughters Zen V Plus with out a problem, but its all ripped music from her music collection. So was thinking it might be a DRM issue of some kind. (Microsoft has released a ton of patches for DRM issues related to the transfer of music, am in the process of trying to document them all and post it later tommorrow.)?On my daughters Zen V plus I have all here music organized into folders:Artist->album->songI organized them that way on the PC before I copied them over. (MP3 Files, not WMA's)?I don't have a large enough collection of purchased music off the web to do any testing to see if it breaks when trying to transfer DRM protected music.
Could be something like a folder limit for number of files in one folder?Not sure, just trying to throw out ideas to help track down the problem, and help people get it solved.

ZEN Nomad Xtra 3

Before I begin with my new to me year old Zen Nomag xtra Jukebox I have a couple questions. Will the player automatically update after the software is installed if there is a newer version available? I think the software provided is a year old but am not sure. How do I find that out? thanks

I would have to say mainly firmware if you want to, it's not a need.... The newest firmware makes the device completely MTP compatible which is helpful and nice since many things like the Xbox 360 and Windows XP don't have any other driver.

Zen jukebox keeps restarting itself, not sure

Ive had my zen jukebox for about a year now and I have had no problems to date. However, now it is occasionally restarting itself a few seconds after it starts playing. It does this maybe once or twice and then it will stay on. What could be the problem? I updated the firmeare and defragged it thinking it might be becasue I put a **bleep**load of music on at once but it still happens. Could there be a button combination that I keep hitting by accident that restarts the player? Kind of off topic, but is there a way to convert AC3 audio(realplayer files) so they can be put on my player? Thanks in advance.
Matt

Did you try starting your player on ac supply( charger ) ?Remove the battery and try using the charger to power the player's operations. Two cases are possible-
. PROBLEM REMAINS - hardware issue. I don't know if we could rectify the fault in player's hardware. The fault may lie with the restart switch or something else.
2. PROBLEM DISAPPERS- If the 'restart' problem disappears, then we know for sure that the battery is the culprit. Replace the battery and check?if it'sfits the slot properly.
?? Finally, if the battery fails to budge, you?may consider buying a new one. You may even try out a cellphone battery( rating- 3.6 V, minimum 00 mAH, which is an industry standard?). Try the following radioshack link if you want to buy a?genuine zen xtra?one. I'm quite sure they must be taking adequate care in safely transporting it.
http://www.radioshack.com/product/in...entPage=search?
?p.s.- even after running so many tests, there's no guarantee that the battery?may be at fault. This being the case,?the new battery would be no good. So i would recommend showing the player to an electronics store and get an opinion before you make a move. ?
Good Luck..

Zen Jukebox won't cha

Hi
Got a bit of a conundrum and was hoping someone could help. I've got an old Zen Jukebox (the USB and FireWire one - yeah I know, very old skool), which was working perfectly up to a couple of months ago. It stopped charging itself if connected to the mains. It's not the charger, as I've tried both the one that came with and the one on my Playdock.
So I'm stuck charging by USB. No biggie, though I notice you have to turn it off (rather than just letting it run out of juice) for the charge symbol to appear. However, last night I was copying some music to it and it ran out of juice. It turn it back on to try to shut it down so it will charge, and it tries to rebuild the library, but runs out of juice half way through. No charging symbol. I leave it for a few hours for the battery to 'recover a bit', but it still can't make it through the rebuild. I try loading the rescue menu and shutting down from there. No charge symbol.
So I'm stuck in a Catch 22. I need more charge in the battery to get it through the rebuild - and I need to rebuild the library to get it to charge.
Any suggestions on how to get this going again will be gratefully received.
Neil

If the battery was flat when it was left it could well have left the battery in a state where it (a) has too low a voltage to be detected by the adapter or (b) is now broken.
See the advice here in the Zen FAQ at Nomadness.net, but beware "force charging", it can cause a battery to catch fire or explode in rare circumstances so do at your OWN RISK.

Zen Jukebox Xtra 40 gig - out of space error messa

Similar Messages

Maybe you are looking for