Zen M100 with 1 day of use no longer works

*Zen M00 with day of use no longer works. After a few hours leave it's plugged into the USB, I realized that it's was abnormal screen. I tried to unplug it from USB by Windows but it still fails. After removing it from the USB and tried calling then turn off the phone, but he would not answer. So I left the option of resetting it. But the reset also did not generate any results, only resulted in a momentary change in brightness on your display. ZEN M00 I tried to call several times, tried to reset several times and have not had any results. The only thing I could find was a logo with the name of Lyra and the message to boot, but it is very difficult to identify what is written because it is very difficult to read. What is happening? is there any solution? Please help me

Hi,
Can you try to enter recovery mode and perform a Clean Up, Reboot?

Similar Messages

  • IPhone 6 Plus scratched the screen in normal use with 15 days of use.

    I would like to express my sadness at the lack of quality and resistance in the new screen iPhone 6 plus, bought the unit within 15 days and am careful in handling the same, but when cleaning print marks realized various risks on the screen my device, thus making the aesthetics that we preserve both users, I sent my device to analyze the technical assistance of the apple to review the same and a possible replacement. I wonder if anyone else has experienced the same problem?
    Grateful ...

    Apple will not replace an iPhone just because the screen has scratches, this is not covered by the warranty. Check point (b):
    WHAT IS NOT COVERED BY THIS WARRANTY?
    This Warranty does not apply to any non-Apple branded hardware products or any software, even if packaged or sold with Apple hardware. Manufacturers, suppliers, or publishers, other than Apple, may provide their own warranties to you – please contact them for further information. Software distributed by Apple with or without the Apple brand (including, but not limited to system software) is not covered by this Warranty. Please refer to the licensing agreement accompanying the software for details of your rights with respect to its use. Apple does not warrant that the operation of the Apple Product will be uninterrupted or error-free. Apple is not responsible for damage arising from failure to follow instructions relating to the Apple Product’s use.
    This Warranty does not apply: (a) to consumable parts, such as batteries or protective coatings that are designed to diminish over time, unless failure has occurred due to a defect in materials or workmanship;
    (b) to cosmetic damage, including but not limited to scratches, dents and broken plastic on ports;
    (c) to damage caused by use with another product; (d) to damage caused by accident, abuse, misuse, liquid contact, fire, earthquake or other external cause; (e) to damage caused by operating the Apple Product outside Apple’s published guidelines; (f) to damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Apple or an Apple Authorized Service Provider (“AASP”); (g) to an Apple Product that has been modified to alter functionality or capability without the written permission of Apple; (h) to defects caused by normal wear and tear or otherwise due to the normal aging of the Apple Product, or if any serial number has been removed or defaced from the Apple Product.
    copied from Read Apple’s One Year Limited Warranty for iPhone

  • Creative Zen Micro with a ! on its side: not work

    I had the Zen Micro installed in my computer but it stopped working. If I now connect the portable device nothing appears, and it tells me that I have to install the drivers. I put the cd in, but at some point it gives me back an error message saying that the .inf files refers to a service that doesn't work. What am I supposed to do?Does it have anything to do with a usb problem?

    ANY IDEAS?

  • Links in some of the websites I use no longer work now that I downloaded the update

    Some of the links in a site I use are no longer working now that I have done the software update.
    Ie.. I use an online canteen programme to order lunch for my kids but now I can no longer use some of the websites links.  I've contacted the company and they think its an iOS update issue and have stated its out of their control- how can I rectify this?

    Hi meechgals,
    Welcome to the Apple Support Community!
    I know it must be frustrating when a website that you normally use is no longer working the way you would expect. The first thing I would suggest looking at your cookies in Settings > Safari. Please reference the attached article for further information. The article goes up to iOS 7 but the settings are in the same place in iOS 8.
    iOS: Unable to use webpages or services that require cookies
    Cheers,
    Joe

  • What keyscrambler software is the upgraded version of Mozilla comptible with? My QFX is no longer working, many thanks jian

    What keyscrambler softward is the upgraded version of Mozilla compatible with? My QFX is now no longer working since the update. Many thanks jian

    I sent QFX an email asking about this,and they never responded.Of course,I have the free version.

  • The sharepoint my company uses no longer works properly with firefox, only a blank page appears, is there a fix for this?

    Hello,
    We currently use Microsoft SharePoint Server 2010 and it doesn't seem to be compatible with the latest version of Firefox (33). When I try to open a sharepoint page, only a blank page appears. I do not get any error messages. The sharepoint works with other browsers, such as Chrome.
    Is there a work around available so that we may continue to use Firefox?
    Thank you!

    Do either of these typical troubleshooting steps make any difference?
    When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Command+Shift+r to reload the page fresh from the server.
    Alternately, you also can clear Firefox's cache completely using:
    "3-bar" menu button (or Firefox menu) > Preferences > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    If you have a large hard drive, this might take a few minutes.
    (2) Remove the site's cookies (save any pending work first). While viewing a page on the site, try either:
    * right-click and choose View Page Info > Security > "View Cookies"
    * (menu bar) Tools > Page Info > Security > "View Cookies"
    * click the globe or padlock to the left of the address in the address bar > More Information > "View Cookies"
    In the dialog that opens, you can remove the site's cookies individually.
    Then try reloading the page. Does that help?
    In case one of your extensions is involved, could you test the page in Firefox's Safe Mode? That's a standard diagnostic tool to deactivate extensions and some advanced features of Firefox. More info: [[Troubleshoot Firefox issues using Safe Mode]].
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    Not all add-ons are disabled: Flash and other plugins still run
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Any difference?

  • Links that used to work with pre Firefox v4.0 no longer work

    I need access to a work related website. the main page of the website opens up with out any issues, but when I click on any of the links nothing happens. This is a new issue that only started once I upgraded to Firefox 4.0. I previously had no issues using this website with Firefox before. I tried using the website with Explorer and had no issues.

    I have iPhone software 2.2.1 (SH11),
    MAC 0S X 10.5.5
    XCode 3.1.2
    In organiser it says The Developer Disk Image could not be mounted.
    Xcode could not find an appropriate Developer Disk Image to mount on Richard’s iPhone. Please contact Apple for the 2.2.1 (5H11) device support package.
    Also in Xcode it says that the active sdk is Device - 2.2. There is no version 2.2.1 for me to select and I cannot add a new active SDK.
    I have downloaded the iphonesdk_for_iphone_os2.2.19m2621afinal.dmg and tried installing it which had no effect to the error above.
    I tried uninstalling Xcode then re-installing using this sdk but again no effect
    I tried installing the iPhoneSDK_2.2 on its own but again no effect
    I tried restoring the iPhone but again no effect
    I've tried the above numerous times, restarting xcode and restating the complete system but still to no effect.
    I am relatively new to MACs so I might be doing something wrong (ie not installing or uninstalling properly) but I am really lost now as to what to do.
    Please advise.
    Thanks
    Richard

  • Problem with GenericCatalogDAO  JDBC Resultset using parameters not working

    Hello
    I have a problem with Petstore GenericCatalogDAO. java. The problem is the behaviour of the resultset object when retrieving data from the database.Below are two synareos one that
    works (when) hard coded and one that does not work when parameter values passed into the the result set.
    1. The code the WORKS.
    statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
    where a.productid = b.productid and locale= 'en_US' and a.catid = 'FISH' order by name"
    ,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
    resultSet = statement.executeQuery();
    resultSet.absolute(1);
    String s = resultSet.getString(1);
    The code that gives me a 'exhausted resultset' error which I think means no results
    String[] parameterValues = new String[] { locale.toString(), categoryID };(For example parameters are 'en_US' and 'FISH')
    statement = connection.prepareStatement("select a.productid , name, descn from product a, product_details b
    where a.productid = b.productid and locale=? and a.catid =? order by name"
    ,ResultSet.TYPE_SCROLL_INSENSITIVE,ResultSet.CONCUR_READ_ONLY);
    for (int i = 0; i < parameterValues.length; i++) {
    statement.setString(i + 1, parameterValues[i]);
    resultSet = statement.executeQuery();
    resultSet.absolute(1);
    String s = resultSet.getString(1);
    There is obviously a problem using these named parametevalues with these preparedstatement resultset, Does anybody know anything about this and a fix for it????
    Cheers. Roger

    Which version of PetStore are you using?
    -Larry

  • HT2845 If my magic mouse is already paired with a machine that is no longer working how can I unpair it so I can use it with a new machine?

    I wish to pair my old magic mouse with a new machine but have no way of unpairing to  the last computer. Is there some sort of reset on the mouse? Is there any other way to unpair it? Thank you.

    You don't need to unpair it with the old machine, the mouse is unaware of the pairing.  Turn the mouse off and back on and pair it to the new machine in System Preferences > Bluetooth.

  • WINDOWS 2008 R2 WITH WINDOWS 8 WALLPAPER USING GPO NOT WORKING

    I have come across a really annoying problem with Active Desktop Wallpaper GPO on
    Windows 8
    It is set to redirect to a wallpaper which is located in a dir on the
    server.
    when the user first logs onto a windows 8 PC, the correct background is applied.
    however when I change the background on the server... the user will still get the
    previous background on the windows 8 computers. If i click personalisation it shows the updated wallpaper but it simply won't
    refresh to it!
    The only way to get it to work is removing the users local / roaming
    profile and then the updated wallpaper is displayed!
    the wallpapers work fine on XP and Windows 7 PC's...
    PLS HELP
    SUNIL PATEL SYSTEM ADMINISTRATOR

    I get this problem.
    I just change the name of the wallpaper each time and that sort of works...sort of however some users still are stuck with the old wallpaper. It must be caching it somewhere in their profile.
    and then I found the post at the bottom of this page:
    created a batch file:
    @echo off
    echo.
    REG ADD "HKCU\Control Panel\Desktop" /f /v "TranscodedImageCache" /t REG_BINARY /d ""
    echo.
    echo Import Complete.
    put that on user log off policy and now it appears to have started working!

  • Progams that work with Alltel and Suddenlink are no longer working with VERIZON (IRC)

    I have worked this issue TO DEATH already and am getting FED UP!
    I have been polite and nice and called customer support to get very short and not very explicit answers to this issue.  
    Complaint #1: When I call technical support and ask questions more complicated than " How do I plug in my computer?" they inform they are transferring me to TECHNICAL support.  Okay so who did I call in the first place if not tech support.
    Problem:  IRC ( Internet Relay Chat)  Is one of the main things that I enjoy doing online.  Some do games, some do work.  I do it all through my little IRC program.  When I was with Alltel and had my little blackberry pearl.  I could even get onto irc just fine that way.  Getting on via a cell phone is kind of a pain.  Small keyboard and lots of typing isn't my idea of that relaxing but.. okay whatever at least I could get on.  Since Alltel became Verizon I was told to upgrade my phone to the brand new Blackberry Curve.  Well now IRC didn't work.  I upgraded to the LG Vortex.  Now it works on my phone.  So I upgraded my wireless card too and IRC worked just fine for a long time.  NOW we are back to the same old same old.
    For those of you not familiar with the program just wiki it.  I have been told by NUMEROUS customer support reps that this program is not being blocked so this is the list of things I went through to make sure it was indeed NOT me or my computer.
    Step 1: System restored before most recent updates to the last date that it was working.
    NO GO
    Step 2: Disabled firewall and virus software temporarily and even turned down my security on my browser
    NO GO
    Step 3: Re updated my computer and updated my firmware on my MIFI2200 card. 
    No go
    Step 4-7 Called customer Support
    NOPE.
    Still waiting.  I am paying for a service that is not providing.  My entire family was with Alltel and is now with Sprint.  I just keep asking myself why am I still with Verizon when all we ever do is fight.  I hate to admit it to the kids but I think it's time for a divorce from you if we can't get this issue resolved.  Before upgrading to these devices I even asked store reps if irc programs would work and they assured me " OH YES!  With these new upgrades things will be better than ever!" 
    I realize to some this seems like not a very big deal, but when I am paying for a service so that I can come home relax, maybe take a few art commisions while chatting on irc and all the sudden I either can't use it or can use it when I couldn't before it's amazingly frustrating.  I have taken my computer over to other people's houses to see if turning my security all the way back up as well as my firewall made a difference, but on any provider OTHER than verizon I can connect just fine.
    Tell me WHY Verizon.  Tell me why you either can't fix this.. or won't fix this.
    Security issues?  That's my problem.  If I want to connect to a DNS server based program that connects via different ports.. that should be MY decision.  You should NOT get to make that choice for me.  
    It's amazing I went to the customer support for IRC and they told me that Verizon doesn't allow you to use IRC.  I have checked NUMEROUS boards and discussion forums only to have them tell me that VERIZON does NOT allow you to use IRC.   However when I talk to Verizon they say " No it must be you.. "  Well I am not taking that excuse anymore.  I've done my share of work on this problem.  Now it's your turn.  Sorry to be rude.. but I paid for the mIRC program, and take artwork commisions over it as well.  I probably pay more for verizon's service than I would with sprint (so says the rest of the family).  
    Please give me some real answers and real tech support. 
    Thanks for any help. 

    I choose option 3.  The moment I talk to them about anything more complicated than the bare basics of getting connected they tell me they will transfer me to " tech support."  Very frustrating lol.  I always wonder who I was on the phone with prior to that because it says Tech support but clearly there must be different levels of their support lines.  Sometimes I get someone who will talk and work with me, but generally I get someone who says " Okay I have down your issue and I'll pass it along.."  then they hang up.  However I have been transferred twice in one sitting from "tech support" to Tech support.  So I dunno.  I think they don't have an answer and so they run me in circles.

  • Filling PDF forms with in-house software - pdf no longer works in Reader

    I have created a PDF form in Acrobat 8.1.0 Pro and enabled the "Filling of form fields" feature.
    1)
    I can open this form in Adobe Reader, fill fields, save, load / repeat process as many times as I want with no problems.
    What we would like to be able to do is "pre-fill" some of the form fields using an in-house application with some data and save. At a later time, users would need to add additional information.
    If I open one of these pre-filled forms with Adobe Reader, it immediately gives an error message and closes the file:
    "This document contained certain rights to enable special features in Adobe Reader. The document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
    Other programs such as "Foxit" and "AmiUni PDFSuite" don't seem to care that the file was pre-filled.
    Is this because Adobe Reader actually checks some sort of CRC or signature which was created at the time the initial PDF form was created by Adobe Pro - and if the signature is no longer valid Adobe Reader won't go any further?
    2)
    What would be the options to get around this problem? Is there a way to accomplish this with Adobe Pro? We need to be able to pre-fill some fields in the form from our application, then have the user complete filling the form manually.
    Thanks!

    Enabling usage rights in reader grants specific rights for a given document - form fill in, saving, signing, etc. Reader checks if something else has been done to the document beyond the scope of the rights granted and apparently the program you are using to add the form data is triggering this test for some reason. There is a digital signature which isused to check this, plus an analysis of what has changed in incremental save sections.
    What you are trying to do should work in principal. If the developer of the application is available, have them look at what else is being changed besides the addition of form data. They should be able to fix the problem.
    If the pre-fill data is the same for each user, you can definitely run the pre-fill and then enable usage in reader.

  • Problems with refine edge in CS5-no longer working properly?!

    Hi all, just wondered if anyone has experienced this bizarre problem and if so how they went about fixing it or changin the settings! (i may have done something to photoshop for it not to work properly!!!)
    Basically, i have got CS5 and was very excited to find the refine edge tool.... made cutting out people real easy and loved it.... however, for some reason the refine edge is not working anymore. Everytime i try to refine the edge using the refine edge tool it isnt selecting any fine details of the cut. It seems to be erasing the image with a low opacity making the selection very blurred?!
    Hopefully you can see from the very quickly put together example that the refine edge tool is taking pixels out if her nose, chin, jumper neck and jumper! Any one know how to prevent this from happening?
    Thanks! Matt

    I am having the same problem with the refine edge tool.  It seems to work the exact opposite of what I was expecting.
    The above two images are before and after using the tool to refine the edge.  As you can see from the picture without the mask view, the selection actually got smaller after I tried to add to it.  When I use the other tool to erase an edge, as soon as I release the mouse button, the portion I tried to remove reappears as it was before.  This has never worked properly for me.  Also, I have tried outputting in several different ways.
    As for the questions posed:  The app and OS are up to date.  I am the only user on my computer, so I'm not sure what using another user would accomplish.  I will mention that I'm using Windows 7, not Mac.  I'm really hoping there is a setting I have wrong somewhere.

  • I have the latest version of Java, but on one program I use no longer works, and this was after a Java upgrade. I've tried everything Java suggested but that didn't correct the problem This does no happen when using Internet Explorer

    I'm using Windows 7, 64-bit version. The problem did not show up until a few weeks ago. I've also tried all the things that Firefox suggested to do, but no change.

    see also these pages and threads about Fast Browser Search (FBSMTWB in the user agent).
    http://help.fastbrowsersearch.com/
    http://www.pccybertek.com/2009/05/remove-fast-browser-search
    thank you

  • I have recently updated my iPhone 4 with IOS6 and my passcode no longer works so I cannot access my phone at all. Help!

    Last night I tried to update the software on my iPhone 4. It appeared to be successful and appeared to put contact info etc. back onto the phone. However, the phone seemed to stop responding properly to touch. This morning when I tried to access my phone the passcode was not working normally. At first it was still randomly letting me in (although not sure on what basis) but now it will not accept my passcode at all. Has anyone else encountered this problem? How do I solve? Thanks.

    First, has your iPhone ever been hacked or jailbroken?  If so, that may explain the behavior.
    If not, and if you cannot get in using your passcode, try this:
    http://support.apple.com/kb/HT1212

Maybe you are looking for