ZEN Micro and MTP with Media Player

Every product review I read about the ZEN Micro says something about the player supporting MTP and working with Windows Media Player 0's Autosync feature. Well, my ZEN Micro does NOT have MTP! Is there a special way to enable it that I am missing?

Perhaps the reviews are wrong?...
It has been said that MTP support is coming for the Touch and the Xtra.

Similar Messages

Zen Micro connection problems with media explorer (my soluti

Hi all,
just wanted to share you my sollution to the connection probs with my Zen Micro. I have installed the MTP version of the firmware and found out it did connected to my machien (media player sync works) however media explorer was not able to install properly (it could not detect the device during install).
I found out that if I closed Acti'vesync (so it is not using the USB probing) it could detect the Zen Micro during install and media explorer installed properly. After this it only detects the zen micro whenever Acti'vesync is not syncing with my PPC or smartphone.
So therefore my sollution to this problem. Make sure Acti'veSync is not connected with a device thorugh USB.

What is "Acti'veSync?" I have installed the firmware and NapsterToGo and WMP recognize my Zen Micro but Zen Explorer does not. Maybe this will work for me. I didn't install CreativeMediaSource.

Zen micro and getting Zen Media Player to recognize

I went back to firmware .0.03 and reinstalled the Zen software after getting no where with firmware that works with MS media player.
I noticed two things.
the device installs differnently in the hardware profile between the two firmware versions
2 If I start the Zen media player and then connect my Zen Micro things work ok. If I connect my Zen Micro and then activate Zen media player things are hit and miss on detecting the Micro.
This just me or have others seen the same thing?Message Edited by summersr on 03-08-2005 03:38 AMMessage Edited by summersr on 03-08-2005 03:39 AM

Just a thought
Might try re-installing the software from the Zen disk (select repair option).
I noticed that it takes an extremely long time to install all of the parts and pieces and if you exit before it finishes you do not have all of the things the Zen needs to function.

Zen micro and media player

only just got my zen micro and i am having big problems sync from media player it keeps coming up with unknown error. has anybody else had this problem and is there a way to fix it's

dave_sg,
In addition, you could also update this patch from microsoft for your Windows Media Player 0 to enhance better DRM support.
Jason

PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD

PE 9.0 no sound with DV AVI type 2 clip, but sound is ok with Media Player and Power DVD

Dear Bill,
Thanks for helping me.
G-Spot reports:
Audio
Codec: PCM Audio
Info: 48000Hz 1536 kb/s tot (2 chnls)
Video
Codec: dvsd
Name: DVC/DV Video
Status Codec(s) are installed
Len 2:36.960   Frms 3,924   kbps 28800   Qf 2.778
Pics/s 25.000   Frames/s 25.000   Field/s 50.000
I/L   BFF   PAL
Pic (w x 720 x 576   seq ext 16:9
Sar 1.250 (5:4)   par 1.422 (~10:7)   dar 1.778 (16:9)
I have imported a WMA-file in Audio-1 track of PE – still no sound to hear. But I can see the sound in the track. (Like in my video-clip) Therefore I also think it is a setting in PE. Will you be so kind to tell me where I have to look? Because I am no expert. Or is it possible that I have to activate anything in PE? It is first time that I will work with PE 9.
Further information: The original sound of the Mini-DVD is 5:1 surround. After first problem I have changed Nero to export in Stereo, but this did not solve the problem.
Thanks and regards
Werner

Problem with media player and the uploaded music

since i downloaded the new version of the nokia pc suite every time i upload a song to the memory and try to update the library in the media player, the phone just shows the updating bar but it doesnt do nothing,it just says updating and thats it i have to cancel the operation and close the media player, and the only i dont remember that well but i think the nokia music manager is uploading the songs to another folder, right now the default folder is e: sounds/digital can that be the problem ?
and another thing, if i go to the built in archive manager in the phone i can see the songs i upload but in the media player i dont see them. Any idea?
Message Edited by alex18 on 18-Apr-2008 08:39 PM

25-Apr-2008 03:56 AM
alex18 wrote:
well i found another thing on my phone , everytime i turn off the cellphone and then turn it on the media player is allways open on the background.
this is a normal feature of n73 ME...sad isn't it? that's one thing i didn't want with my old phone...
What you can do is to go to music player then click options and then exit...
hope this helps.
CeS
"The best index to a person's character is how he treats people who can't do him any good, and how he treats people who can't fight back"

Itunes won't play any cd i put in the drive (macbook pro). I am running paralells with windows 7 and have disables media player so that didn't help

itunes won't recognize/play/import any cd i put in the drive. I am also running paralells with windows 7 and have disabled media player. any suggestions?

I have the same problem.
On launch itunes works fine.
If I let it play through a full album of songs unatended, when I return it respondes, but will not play music. I can browse my collection, but when i click the play button, press the space bar with a track selected or double cclick a track it will not play. A restart of iTunes solves the problem temporarily.

Zen Micro and Napster to Go probl

I have the Zen Micro and use Napster to Go. I updated the firmware on my player yesterday since synchronizing my player has become very difficult. I have tried using both the Napster to Go and Windows Media Player 0 to do this. With Napster to Go I get a message that the player has stopped responding, usually within 0 minutes, and with WMP it never completes. After 2 hours, the synchronized is only at 8%. Also, I have many songs that show a license error, even though there appears to be no problem playing the songs and downloading on Napster to Go. It is becoming very frustrating. The computer seems to have no problem recognizing the player.
Also, if the battery is nearly dead and I hook the player to the computer, I can't try to sync at all until the battery is charged. Is this normal. I have used other players where if you plug them to the computer they are powered through the computer and charge while they are used.
Any help would be appreciated.

If you have any music on the player that's not on your hard dri've, move it back to the hard dri've now. (Since you just upgraded, that shouldn't be an issue; but since you're gonna reformat your dri've again, I'm just being 00% sure.) Then install the Windows hotfixes listed in the FAQs. Then go into recovery mode (remove battery, then hold power switch in On position while re-inserting battery until menu comes up); from there, choose Format.
If that doesn't fix your problem, go back to recovery mode, choose Reload Firmware, then re-run the firmware upgrade.

Zen Micro and Vista? - Sol

I am trying to get my Zen Micro (DAP-MD0004) to work with Vista to no avail. It is loaded with the latest firmware (PlaysForSure - I dont think so!!!) and Vista picks it up and installs the driver no problem.However, if I try to view music through My Computer it doesnt show anything. Windows Media Player doesnt work either because its WMP. The sync windows just keeps saying to connect a device. I have installed Creative MediaSource 5 Organizer with plugin and even though it picks up my Zen, when I try to view my music it doesnt respond and I have to kill it.Has anybody got any advice for me I have already searched the forums for Zen Micro and Vista and I have found nothing to help me. Is Creative looking into the problem of people not being able to put music onto their devices

I have finally got it to work.Here is what I did for anyone that is having the same problem:
Boot the Zen to Recovery Mode (Remove battery, hold switch in on position, and insert battery)
Run a Clean Up
Run a Format
Reboot
Install Creative MediaSource 5 Organizer with PlaysForSure Plugin
Connect Zen Micro to computer and run MediaSource
You should now be able to copy music from your computer to your Zen.
I am disappointed that I couldn't copy my music off the device first but hey-ho.
I am also disappointed that the latest version of MediaSource requires you to purchase a pack to convert music to MP3.
It never fails to amaze me what businesses will do to try and get more money from us consumers.

CREATIVE ZEN MICRO and WINDOWS VI

I hope this question has not been repeated.
I have a Creative Zen Micro and have attempted to install it on my current computer that uses Windows Vista 32-bit. However, it was unable to install or find the driver necessary.
I've already looked at the 'driver release plans'?for this product and there is only a page regarding 'Nati've Support', which says 'The MP3 products ZEN Micro, ... require the latest firmware to ensure Nati've Support in Window Vista'.
I've searched for firmware for the Zen Micro on a Windows Vista 32-bit in English, and found nothing.
How can I make this product work with my Windows Vista 32-bit computer ?
Thank you !!!

Robby & Lizzy
First of all for a little background information, the problem lies in a problem between Creative's firmware installation program and Windows Media Player . WMP is standard in Windows Vista. As a matter of historical information, Creative has not developed any drivers for Windows Vista, therein the rub; Windows Vista does support the Microsoft PlaysForSure initiati've, and many of the older players like the Micro series does have PlaysForSure firmware available to enable the player to be used in Windows Vista.
Now for an outline of the necessary ste
ps.
Back up all of the content on your Micro. The firmware that you will install includes a disk format that will erase all of the content and change the way that the disk dri've on the Micro is formatted.
You'll need to find a Windows XP system that does not have Windows Media Player installed. You or the owner of the system should also be knowledgeable in the use of Windows XP System Restore feature so that you can return the system to it's previous state after you are finished with it.
Create a Restore Point on the XP system. Download and install the drivers for your Zen Micro to the XP system. This will enable the player to be recognized by the computer.
Download the PlaysForSure driver for the Micro, V2.2.02, to the desktop of the XP system.
Connect the player to the system with a USB cable and execute the program.
When the firmware installation has completed, the player will reboot. You may disconnect the player. After you have confimed that the firmware revision is correct on the Micro, do a System Restore to put that system back in the condition that you found it.
Connect the Micro to your Vista system and it should recognize the player and install the nati've Windows PlaysForSure driver and pair it with your Micro.
RobbyBobson wrote:
Would it be possible for someone to post a step by step guide that helps me understand what exactly I have to do to get my Zen working. Help would be much appreciated.

Tracks ripped with EAC Play alphabetically, when ripped with Media Player Play in the correct or

I just got my new zen touch. I downloaded the new firmware update and it seems to be working great.
The only problem is that when I add music that I've ripped with Exact Audio Copy c/ Lame Encoder to MP3, The tracks don't play in the correct order on my Zen Touch.
When I add an album ripped with Microsoft Media Player, it plays them in the correct order.
I think that the ID3 tags have all the appropriate info becuase when I hold my curser (on the computer) over the eac ripped tracks, the pop up menu list the track #, artist name and song title etc.
I've read the FAQ and it doesn't matter if I select Album-Play, Artist-Album-Play. I've tried all combos.
Anybody with experience using EAC? I've looked in the settings and I can't find anything wrong.
Is it possible that EAC is using and ID3 Format that my computer recognizes but my zen touch doesnt.
But Media Player uses an ID3 format that it does recognize.
Also, The album ripped with media player was ripped to WMA. While all the tracks ripped with EAC that are giving me trouble were ripped to MP3.

What software are you using to copy? Make sure both that and the drivers are completely up-to-date.

Zen Micro: firmware problem with 2.00.

Hello,
I just bought the Zen Micro and did an upgrade of its firmware to 2.00.2 before playing around with it.
I then ripped CDs using WinMP 0 and tried to sync the device.
After around 30 songs, the Zen Micro did not accept any more songs.
I also tried the Zen explorer way by copying files directly to the device.
Same problem after about 30 songs, the device stops responding...
Any clue?
Thank you
Nicolas

First easy thing to try is a disk cleanup. To access the Rescue Mode on the Zen Micro, remove the battery, hold the power switch to the "on" position, reinsert the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.
If that doesn't help, and to check if there is an issue between your PC and the player, try and find another PC you can test with. If the other PC works OK this suggests a USB incompatibility, so the quick solution might be to buy a good quality PCI USB card like Adaptec or Belkin. Not a wonderfully elegant solution, but USB cards are generally cheap and it might solve the issue immediately.

Difference between zen micro and zen micro S

yeah... the title pretty much explains itself... I want to buy a zen micro and i went to the page which i was gonna buy it from (amazon) and it had gone, it said this product no longer runs instead buy the Zen Micro SE, WHAT IS IT?!!
xxx

Averry,
If you ordered the orange one today from our online store it would come with:
<TABLE cellSpacing=0 cellPadding=0 border=0>
<TBODY>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com//images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD class=text>Zen Micro player</TD></TR>
<TR>
<TD colSpan=4><IMG height=0 alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width= border=0></TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com//images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD class=text>High Fidelity earphones</TD></TR>
<TR>
<TD colSpan=4><IMG height=0 alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width= border=0></TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com//images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD class=text>Rechargeable li-Ion battery </TD></TR>
<TR>
<TD colSpan=4><IMG height=0 alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width= border=0></TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com//images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD class=text>USB 2.0 cable</TD></TR>
<TR>
<TD colSpan=4><IMG height=0 alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width= border=0></TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com//images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD class=text>Installation CD</TD></TR>
<TR>
<TD colSpan=4><IMG height=0 alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width= border=0></TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com//images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD class=text>Quick Start Guide</TD></TR>
<TR>
<TD colSpan=4><IMG height=0 alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width= border=0></TD></TR>
<TR>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD vAlign=top><IMG height=2 alt="" src="http://images.americas.creative.com//images/bullet___6.gif" width= border=0></TD>
<TD><IMG height= alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width=5 border=0></TD>
<TD class=text>Creative MediaSource</TD></TR>
<TR>
<TD colSpan=4><IMG height=0 alt="" src="http://images.americas.creative.com//images/spacer___6.gif" width= border=0></TD></TR></TBODY></TABLE>
and as part of the promotion currently running it would include an extra Battery.
If you wanted an AC adapter with it, you could order one along with the player and it should arri've in the same shipment. They are sold separately under accessories.
Jeremy

Zen Micro and Napster to

I just bought the Zen Micro and have updated my firmware as Napster to Go wants me too, but it seems like I have to update my firmware almost everytime I log on to Napster and try and download songs. Does nayone know fi this is an issue with Napster or with Creative. It sucks to have to update it everytime because then it wipes out everything on my Zen Micro and I have to download the playlists again. I'm new to all this too, so maybe it's something I'm doing wrong or missing? Help!
Also, is there another music download site that might work better with the Zen Micro?
I'd appreciate any help I can get. Thanks!

I'm not a serious tech head, but I know enough to use the stuff that I buy. Basically, mine doesn't recognize my player 00% of the time either, I usually just disconnect my player and restart... I guess the software and stuff is an inexact science. I figure that as long as you can transfer songs to the player then your cool, and it will usually allow you to do that.

Zen Micro and XP S

Using 2..02 on my zen micro and windows does not see my player through the usb port. Is it true that I need to upgrade XP to service Pack 2? I'd like to avoid this if possible. Does anybody else use this firmware with SP ?Thanks!

fdreinthea wrote:
SP2 conflicts with a lot of programs. Norton Ghost, several differenct firewall packages and even different peripherals will cease operation with the update.
Usually a re-install of the program and updating it solves the problem for many if not all programs and devices.

ZEN Micro and MTP with Media Player

Similar Messages

Maybe you are looking for