Zen Micro: Can See Files in Mead Cen

Yes, i cant see the Files in the media center anymore...he doesnt show me anything but he says, that the Zen Micro is connected...there's no error message or something.
i also cant import new files...he says, that the player is busy or something...man
David

davidinsarasota wrote:
I had the same problem last weekend and I did a system restore to the previous day and it solved the problem.
does windows2000 have this option?
now i did this:
i formated my zen mirco, cleaned up and erased the firmware ("reload firmware").
then i updated the player to the newest firmware.
at first, the midea explorer shows me everything and i can upload files, but only about 3...then there appears an error "Error" ... after restarting i can't see the files in the media explorer anymore...same problem like before.

Similar Messages

  • I am logged on to a wifi and can see files from other users on this network.  Can they see my files as well?

    I am logged on to a wifi and can see files from other users on this network.  Can they see my files as well?

    Yes and no. It depends on your settings.
    Go into "System Preference" and click on "Sharing"
    If you have services checked such as "File Sharing" then others can see your computer on the network. But you really don't need to worry because others would need your username and password to have access to your files.
    What you see are just computers annousing themselfs on the network. To have access to said computers, Username and Passwords are required.
    Hope this helps

  • Zen micro can not be operate if it is connected to Travel Dock for Zen

    I just bought Travel Dock for Zen Micro. I have 2 problems. Any body can help me please? 1. When I connect the Zen Micro to Travel dock. The Zen micro can not be operate both manual or using remote. But the charge sign in the Zen micro is appeared. So I am sure that the connection between Zen Micro and the travel dock is OK. No sound is produced. Any clue for it. 2. The I tried to connect the zen using line in cable. There is sound, but the sound is too weak, even if I set the maximum volume. Any clue for it? Any one has the same problem? How to overcome it? Thanks before for your helping and information

    hey Jason thx for reply well it's weird like I said but whenever I downloaded the firmware ver. 2..0 or something the newest one it just said that the Player/USB was not hooked up to the computer when it actually was and it doesn't play any music it goes straight to restore mode. tell me if you need to know a little bit more thx

  • Zen Micro - copying WMA files with DRM using WM

    I have Windows 98SE and Windows Media Player 9. I was wondering, if I get a Zen Micro, will I be able to use WMP 9 to copy DRM-protected WMA files to my device, or do I have to use the Creative software? I read in another post something about the 2.x branch of the firmware being needed for Plays For Sure compatibility -- does this mean I would need this firmware to use WMP? Does the 2.x firmware have the fixes for the battery drain problem, etc.
    One more question. With my Muvo TX FM, Windows Explorer recognizes it as a removable dri've, and I can drag-and-drop non-DRM MP3s directly to it. Is this possible with the Zen Micro?
    Thanks,
    Huck

    Most of your concerns are addressed http://www.jakeludington.com/gadget_...ipod_mini.html
    Solutions
    http://real.lithium.com/real/board/m...&message.id=60
    Drag and Drop
    http://reviews.designtechnica.com/re...908_page2.html

  • Zen Micro installation problem - file "data2.cab" neede

    Hey
    Trying to install my Zen micro software when it says, " Please insert dist that contains the file data2.cab"
    I have the installation CD so why is file not on it'sDan

    It might be a problem with the CD, but it sounds an odd error to get.
    You can of course download the latest drivers and software from the download page for your player, so this is probably the best workaround as well as getting the latest software.

  • Just Got a Refurb Zen Micro, Can Anyone Please Help - Clic

    Hi all,
    Just got a Zen Micro 6GB refurb today, when i first tried it (before hooking upto a PC) the clicker didnt work. I hooked it upto my PC and transferred some tracks, when i disconnected however my device started playing up.
    When i turned the device on the screen glowed blue for 5 or so seconds, and then turned off. My first (panicked) thought was that the player was updating its firmware when i had unplugged it, although it didnt mention this anywhere.
    What was interesting however was while the device was in this "blue screen" mode, when i scrolled up and down the clicker made a clicking sound, even though i couldnt see what i was scrolling because the screen was dead apart from the backlight. This proved that the clicker did physically work.
    I reconnected to the PC in some vein hope of fixing it, and after a couple of on/off cycles it booted, and has worked fine since, however when i set the clicker on it still wont click.
    I am interested as to if anyone has any ideas as to how to possibly fix my clicker problem. I know it will physically work as i've heard it click when my device crashed, i reckon a bad firmware flash has stopped my clicker clicking.
    Can anyone recommend me a particular firmware please, everyone said to stay away from the latest PlaysForSure firmware on my old Zen Xtra, and apparently it bricked lots of devices, so im a bit apprehensi've about getting the latest release.
    If anyone can help me fix my clicker please i would be most grateful as i dont want to send my little player back.
    Thanks!

    Have you followed the installation instructions?
    Step :Insert the battery
    Step 2:Set up the software
    Turn on your computer.
    You must log in as an administrator in Windows ? before you can set up the
    software.For more information,refer to your operating system?s online
    Help.
    2 Insert the Installation and Applications CD into your CD-ROM/DVD-ROM
    dri've.
    Your CD should start automatically. If it does not,follow the steps below:
    i.Double-click the My Computer icon.
    ii.Right-click the CD-ROM/DVD-ROM dri've icon,and then click
    Autoplay .
    3 Follow the instructions on the screen.
    4 When prompted,restart your computer.
    WARNING DO NOT connect your player to your computer before setting up the
    software.
    Step 3:Charge the battery
    Connect your player to your computer?s USB port with the supplied USB
    cable.
    2 When the battery is charging,the battery charging icon flashes on the
    Organic Light Emitting Diode (OLED)display.
    3 Disconnect your player from your computer when the battery is fully
    charged and you see on your player ?s OLED display.Fully charging your
    player takes approximately fi've hours. If your fully charged player remains
    connected to your computer for a prolonged period,the OLED display
    blanks out automatically to save battery power.
    NOTE:
    ? For continuous battery charging using the USB port,make sure
    your computer is not in power conservation mode.For more
    information on power conservation modes,refer to your
    operating system's Help.
    ? Connect to a computer USB port only;avoid connecting to a USB
    hub.
    ?For express battery charging without using your computer,
    purchase the Zen MicroPhoto Power Adapter or Uni'versal Travel
    Adapter.

  • Can see files on Mac Mini from Macbook Aire on same network

    I can see the MacMini in the side bar from the Air but when I click through i can only see the public folders.  I have File Sharing checked in the System Preferences so I dont understand why i cannot see the files on the mini.  I can only see the drop box in the public folders and it wont even allow me to access that even if i wanted to.
    Is there something else other than check file sharing in system preferences that I need to do
    Also, I have an external drive attached to the MacMini which is not visible from the Macbook Air, not sure if that is the same problem
    Thanks for any advice you can offer
    Andrew

    Note that there's a difference between sharing and syncing.
    Sharing will allow you to access the files on your Mini from your MBP, but the files won't be on your MBP when you take it somewhere else.
    Syncing is making both Macs have identical copies of files, so that a change on one Mac makes a change on the other Mac.
    If you've got a large LightRoom catalogue and limited space on your MBP, then you want sharing. The link above should get you started with that.
    For syncing, I recommend BitTorrent Sync, which is free. It's basically "DropBox without the cloud". You select a folder to sync, and then whenever your two Macs are on the same network, any file in that folder that changes is synced to the other Mac.
    I use it to keep my entire Documents folder synced between my Mini and MBP.
    http://www.bittorrent.com/sync
    You may need to be careful about modifying the same document on both computers at the same time, though I believe BS does handle this in some way. Also, if you're syncing an app's data library, then some database files (e.g. with computer-specific data like file path names) may not sync well.
    Of course, you could use DropBox, though you'll need to subscribe if you want more than a couple of GB.

  • How do I set up Sharing so that I can see files and not "connected as: vnc"

    Since installing Leopard and updates, I can see a shared iMac (running Tiger) on my Airport Express network, but the window only shows the header "connected as: vnc." I can't see files, nor am I prompted to log in. What settings do I need to change in order to get Sharing working properly with the iMac?

    Have you gone under system preferences->sharing and enabled file sharing?

  • Zen Micro - Can it be used in the ca

    Hello,
    I have a Zen Micro and wondered if there is any way that it can be used through a conventional car cd player (as the Ipod can).
    Any ideas ?
    Cheers.

    Many car stereos have a line in. If that is available then use that. If not, then you can get an fm transmitter that plugs into the player, and use your car radio to receive the signal. If there is a tape player, then you can use a cassette adapter to transfer the signal from the player to the car tape player. These are the same methods that would be used with an ipod.

  • Can see files in iPod folders on computer, but not in iPod

    Hello - first time iPodder here . . .
    I've purchased several songs from iTunes prior to owning an iPod. Since my purchase, I was able to move about 40 songs from my home computer to the iPod. All the remaining 100 or so wouldn't transfer for some reason.
    As well, I use iTunes on my work laptop. I downloaded one movie & one TV show in from the iStore. I have a 30GB video iPod. It is set to manually move files (drag & drop). When I drag from my iTunes folders into my iPod, it appears to transfer correctly. I see the status window moving along slowly until the transfer is complete. Afterwards, I can see the file(s) listed in the appropriate folder under in my iPod section. However, after I eject the iPod, the files are nowhere to be found.
    Am I doing something wrong?
    Thanks for your help!!

    Sorry - when I say they're nowhere to be found . . . I mean on the iPod. They still show up in the Library folders . . . and the strange thing is - they still show up in the iPod folders too unless I delete them.

  • Help Me, problems with my Zen Micro. (please see inside for scenar

    I turned on my Zen Micro
    then it is stucked at the CREATIVE LOGO
    so I did the Recovery Mode
    I chose Clean Up
    So a window came out that says something like are you sure you want to clean up so I chose YES.
    then a window came out that says "Scan Disk or Scanning Disk"
    I thought that my problem is already over
    but, Oh My God! I've already been waiting for like 8 hours and the window saying "Scan Disk" is still not finish. waaaaaa!
    then I thought, probably Clean Up is not the solution
    I tried Format All
    then a window came out saying "Formatting"
    What the! I did it like in the evening and I slept for like 0 hours to check in the morning, but still, it is still not finished.
    What is this?
    I also have a problem, my computer doesn't recognize my Zen, and just to double my bad luck I lost my warranty receipt.
    Oh my Lord, please help me.

    So -
    I have received a message from support, stating that the player most certainly is irreparable - and instructions on how to return it to have it replaced.
    It seems to me that the player harddisk is broken/damaged. This may be a result of using it while jogging/running... (in my view) It is dissapointing that the player can't handle this - which of course must be considered a fairly normal usage. I have experienced some skipping earlier, but never thought this would affect the player to such an extent.
    Hopefully - this is not a fault that applies to every Zen Micro out there, although your posts may indicate that this may be an issue with several players.
    regards,
    BjOlav

  • Ok, new computer. Authorized it. Can see files for everything in cloud.

    OK, new computer. Authorized it. Can see all music in cloud, not on hard drive.  My old computer which had the original files down loaded, was able to be saved from hard drive. The tech that is helping, what should I tell him to do to get my files back on my new hard drive? They are on an external drive. Thank you for your help.

    OIf they are on your external hard drive and you want them back on your local hard drive.
    First check that the Copy files to iTunes medi folder is selected in Preferences, Advanced.
    Alsoo under store turn off show ourchasaes in the cloud
    Turn off itunes match
    You now have an empty library
    Then File > Add to library and choose the parent folder of music on your external hard drive click Open and itunes will copy all that music into the right folder on your machine. How long it takes depends on how much music you have.
    When finished turn on itunes Match if you are using it

  • Zen Micro, can't start

    my Zen Micro used to work at its full potential. but when i was playing a song i accidentally pressed "Copy From Album" (something like that). then my Zen Micro froze and was not able to use it ever since. I can turn on my Zen Micro, but it just goes to the screen that says "CREATIVE." i tried the Recovery Mode, and still no luck! it keeps freezing and never wants to start up!
    if anyone can help, it well be greatly appreciated
    thnx!

    Similar problems were discussed here often. If recovery does not work, only help is to contact Creative customer service and act according to their reply. Usually they ask to send player back to them for replacement.
    I had similar problem. After 3 days my player hanged and nothing helped. I was disappointed too, but since I was sent the new player, I feel much better Sending replacement took about week (from Ireland to Slovakia).
    So the new one works well (already 3 weeks) and is fully loaded. Sometimes it gives me hard time when I'm switching it on and creative logo appears instead of splash screen, but it's never hanged. So slowly I relax.

  • Zen Micro can it be fixed

    Someone Help me or guide me in what to do with my Zen gosh Zen Micro super neato cool I was wondering what to do with it b/c it does the following: my computer says the zen mirco isnt connected to my pc when it actually is. So I wasn't successful in loading the new firmware. I think something is wrong with the software inside the player.
    What do I do and can this be an easy fix or not?

    hey Jason thx for reply well it's weird like I said but whenever I downloaded the firmware ver. 2..0 or something the newest one it just said that the Player/USB was not hooked up to the computer when it actually was and it doesn't play any music it goes straight to restore mode. tell me if you need to know a little bit more thx

  • Need accessories for Zen Micro-can anyone he

    Hello Everyone,
    I purchased ny zen micro a couple of months ago and already i am keen to get accessories. Does anyone know where to get accessories (from a proper shop like John Lewis etc.). If you do please send a reply as soon as possible
    Thank you

    In Japan, the remote comes with the Zen Micro (still doesn't justify the $80 dollar price increase!!). I tried using the remote and found it to be a waste. I wouldn't bother buying it. When I am wearing a jacket I put the Micro in my jacket breast or side pocket. When I am not wearing a jacket, I use the case and belt clip.
    Unless you make massi'vely long playlists and would thus keep the Micro in your bag for LONG periods of time, the remote is essentially useless. It only has volume, puase, play, and next track controls, and no display of course.
    Just my thoughts on the remote. The clip sucks on the remote too. It's too small to clip to the strap on my bag securely.
    Jason

Maybe you are looking for

  • Can I export a Numbers table to the body of a message in Mail?

    Here's what I'd like to do. I want to create some simple lists in Numbers or Pages in the form of a table. I would then like to import that into the message body of a message in Mail. I've tried to cut and paste, but that just ends up with a jarbled

  • Can I add images to my radio buttons in sharepoint ? If so, how do I add images to my radio buttons in sharepoint?

    Hello, I would like to add Images to my radio buttons in sharepoint input form. Has anyone tried this and succeeded? If so what did you do? I have a "how are you feeling section?" and rather than use words like Happy or Sad; I'd prefer to have a smil

  • Not able to set values in drop down for a table field

    Hi All, I am not able to set values in drop down for a table field. Although I am able to set these values to a stand alone field but its not happening for a particular table field. I am using ABAP web dynpro for coding. Pls help. Regards, Bhaskar

  • How to make chat column text wider

    I'm using 7.2 on Mac OS X Yosemite. The chat window shows message text in a thin newspaper style column and I can't find away to resize it to a sensible width. I've disabled compact chat view in the preferences. Is there anything else I can do?   

  • Communication Error CPIC rc=20 SAP rc=236

    Hello, We had SAP running on this application server and then switch hostname/ip address and now get the error message above.  In SM51 from the central instance the server is visible but double clicking on the entry does nothing.  If I double click o