Zen Micro does not accurately show length of

For most of my mp3's, the Zen Micro doesn't show the correct length of the mp3. For example, I have one mp3 that is like 20 minutes long, but for some reason it only shows a little over 4 minutes (4:06 for example).
Once it goes past the 4 minutes, it keeps playing, but the length won't increase...so if I were to fast fwd or rewind, it does it as of the 4:06 mark.
Other mp3's will be six minutes long and it only shows it as 20 seconds.
Has anyone else experienced this?

That sounds like an MP3 format problem. Try re-ripping the MP3 with a better encoder. It's probably something wrong with the way the MP3 got tagged.

Similar Messages

  • Changing animation frame rate when rendering in photoshop does not change the length of the video?

    I made a walk cycle animation in Photoshop CS6 and want to render it into a quicktime format. I'd like it to be 12 fps, but when I rendered it at 12 fps the video seemed to be missing frames, and the video was 3 seconds long. I have 98 frames to my animation; doing the math, at 12 fps it should be 8 seconds long. Not 3.
    I was confused and for curiosity's sake I rendered the video at 6 fps, trying to really slow it down. The video ended up being STILL 3 seconds long and only maybe 20 frames. I was missing literally 70 frames. I'm so upset with this rendering thing, I could chuck my computer at the wall.
    Does anybody know of a solution to this?
    edit: If it means anything, I've tried rendering it straight from the frame view and the timeline view. Each time I render it I have the timeline frame rate match the rendering frame rate as well.

    floriannaart wrote:
    Changing animation frame rate when rendering in photoshop does not change the length of the video?
    Photoshop CS6 and CC support two types of animation Frame animations and a Video Timeline
    Changing the frame rate should not change the length of a video timeline. It should just change the number of frames that are rendered.  To change the length of a video you need to change the length of the video timeline.  If you increase the length of the timeline and there is audio I'm quite sure there will be a problem with it,  The Video part will most likely be better then the sound. The required number of extra frames can be generated however the video may look like slow motion. If you decrease the length the motion will speed up.  The length of a video is normally done be editing video clips which are trimmed and stitched together to get the desired duration. Not normally done by altering the duration of a clip.
    The duration a of Frame animation is the sum of the times each frame is displayed.  In a frame animation the length of time a frame is displayed can be varied it not a normal motion picture video.  To have a smooth frame animation you need a sufficient number of frames that are different from each other to show smooth motion.  You can use Photoshop Frame animation tween feature to have Photoshop manufacture frames to help with a smoothing the animation.   Once you have a frame animation the length with the motion you want you can have Photoshop convert it to a video timeline and render a normal motion picture video.  It will not have audio but you can add audio to it.

  • Zen Micro Photo not working with new XP SP2 install

    Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
    When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
    There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
    Any help greatfully received!

    Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
    Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
    Filesize : 27.9 MBDownload

  • Zen Micro is NOT detected by Creative MediaSource Organizer or Windows Media Pla

    <SPAN>Well, I have read through a good part of the message forum and have found nothing to help my case and I believe, truly believe that I have tried everything!
    <SPAN>
    <SPAN>My Zen Micro is detected by my computer and when plugged in I am prompted by MTP Media Player to
    <SPAN>Launch Windows Media Player and synchronize files </LI>
    <SPAN>Take no action</LI>
    <SPAN>
    <SPAN>If choose to launch Windows Media Player it does not detect the portable device
    <SPAN>If I choose to take no action and launch Creative MediaSource Organizer instead, the device is still not detected.
    <SPAN>
    <SPAN>I have checked my Device Manager and it says that the device is working properly, drivers are installed (this is the most common problem ? but for me this is the part that is working correctly).
    <SPAN>
    <SPAN>When I open the Zen Micro Media Explorer it tells me that the device is not connected.<SPAN> <SPAN>I cannot transfer music files with Windows Media Player or Creative MediaSource because both programs do not detect the Zen Micro.
    <SPAN>
    <SPAN>I should note that the Zen Micro does work properly on another computer in my household.
    <SPAN>
    <SPAN>Can someone please offer suggestions?
    <SPAN>Thanks

    Ha ha ha! Sucess at last!
    I got it working now!
    I was missing a step in the second suggestion (link posted by DM) to edit the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB and add "EVERYONE." Plus I didn't reboot right away! I guess that would help too. Sorry forgot to do that.
    THANK YOU! The support on this fourm is wonderful! Glad to see the help is here for Creative products.

  • As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    As a new Macbook Pro user I was saddened to find that the feature of using keywords in iPhoto '11 does not allow showing same under each photo.  I understand this was available in earlier versions.  Any comments?

    Against TOU which you "agreed" to in order to post in these user to user forums.  If you want to "suggest" something to Apple, do so in the Product Feedback area.

  • Freight Charges does not correctly show Tax % / calaculate

    Hi
    When I try to add freight charges to an A/P invoice the tax group shows correctly (V1) but the Tax % shows 0.0 instead of 7.5 on every row/type of freight and therefore the Tax is not calculated automatically.
    Somebody an idea whats wrong?
    Thanks
    Franz

    Problem solved.
    As a difference to all the other modules, A/P Invoice does not have the current day as default posting date (maybe this a bug). Since the Tax calculation needs the posting date, it does not correctly show the Tax on the main form as well as on the freight dialog, it shows the correct code, but always with 0%.
    So, for correct tax calculation, always make sure the posting date is entered before.
    @SAP: Change the behavior with the default posting date, as it is in all other modules.
    Best regards,
    Franz

  • Is it possible that i download an older version of firefox, mainly version 4. trend micro does not work with version 5 yet

    is it possible to download firefox version 4, because trend micro does not work with version 5 yet

    Yes you can download them at Firefox's Archive on just chose your os
    url:
    http://releases.mozilla.org/pub/mozilla.org/firefox/releases/4.0/

  • Properties panel does not entirely show

    Part of the properties panel is not shown - what cause this? - how can it be fixed?
    Using DW CS4 and Win 7
    Arrows show how parts of the panel are not seen

    1600 to 900 is screen resolution and font size was 125% - changed it to 100% and that allowed full properties panel to be displayed
    Thanks everyone - Merry christmas
    Date: Thu, 19 Dec 2013 15:00:47 -0800
    From: [email protected]
    To: [email protected]
    Subject: Properties panel does not entirely show
        Re: Properties panel does not entirely show
        created by Nancy O. in Dreamweaver support forum - View the full discussion
    What screen resolution are you using on your display settings?
    What font sizes are you using on your system?
      Nancy O.
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5946046#5946046
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5946046#5946046
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5946046#5946046. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Dreamweaver support forum at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • [svn] 3459: Fix FB-14050: Watchpoints: Debugger stack does not always show correct 'Suspended' message when at a Watchpoint.

    Revision: 3459
    Author: [email protected]
    Date: 2008-10-02 14:09:16 -0700 (Thu, 02 Oct 2008)
    Log Message:
    Fix FB-14050: Watchpoints: Debugger stack does not always show correct 'Suspended' message when at a Watchpoint.
    Ticket Links:
    http://bugs.adobe.com/jira/browse/FB-14050
    Modified Paths:
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DManager.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DProtocol.java
    flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

    Hi Experts,
    After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
    Thanks

  • I have an ipod 2  just bought an ipod air and would like to transfer everything over from ipod 2. i backed up the 2 in itunes and when i connect the air it does not even show up. any help would be greatly appreciated.

    I have an ipod 2  just bought an ipod air and would like to transfer everything over from ipod 2. i backed up the 2 in itunes and when i connect the air it does not even show up. any help would be greatly appreciated.

    sorry not ipod 2 but an ipad 2

  • Zen 300 does not resume playback at same place after shutting down.

    My Zen 300 does not resume playback at the same place in the audio file after the player automatically shuts down (idle shutdown) when I turn the player back on. It returns to the beginning of the track. How can I ensure playback resumes after automatic shutdown?

    GThis is normal for Idle shut down my zen 300 does this to me to. I don't think there is a way to stop it though but if there is then the creative lab support people should be able to help just send them an email.
    By the way does anyone know how to create tasks for the zen 300? I tried with no luck.

  • My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

    My iPad and iPhone have the same syncing calendar but my Windows 7 PC with iCloud does not sync/show the same calendar...please help!

    iCloud will not sycn a calendar from an external source.  In order to use iCloud to sync it, you would have to move it to iCloud and stop using Google.  I know how to do that on a Mac, but I'm not sure how to do it on a PC.  If you're using Outlook, I suspect you export it as an .ics file to your desktop, then import it to the iCloud account in Outlook.  I'm sure you could use Google to find the specific steps.
    However, there's really no reason not to just use Google to sync your calendar across your devices.  Instead, just continue to use Goole calendar on all your devices and they should stay in sync.  Take a look at this video: http://www.youtube.com/watch?v=C0Jj0KFgbYI.

  • HT1386 my updated(iOS6) i4s does NOT sync & show up in devices in iTunes

    My newly updated (iOS6) i4S does not sync & show up in devices in iTunes ?

    You have answered your own question:
    "requires 10.6.3 or higher"
    " i upgraded my itunes to 10.5 "
    You need itunes 10.6.3 or later.

  • HT204387 Why can,t I bluetooth pair my iPhone 3GS with my new iPad, it does not even show up as discoverable. What can I do to fix this

    Why can,t I bluetooth pair my iPhone 3GS with my new iPad, it does not even show up as discoverable. What can I do to fix this

    For what purpose are you trying to pair them?
    Only supported peer to peer apps such as photo transfer or multiplayer games can connect to other iOS devices via Bluetooth. You initiate the connection inside the app running on both devices.

  • Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

    why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
    i don't know why...

    Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If this doesn't work, then try the more involved stuff.

Maybe you are looking for

  • How to differentiate a Goods receipt ?

    hello gurus how to differentiate the Goods receipts which are done only against an Inbound Deliveries  from that of direct POs. Is there any table to check the same ? Thanks in advance

  • Differences between Oracle Linux and CentOS

    Dear ALL I need differences between Oracle Linux and Cent OS, which is the better OS to install Oracle11gR2. Kindly send me the benefits and percentage if anybody can... Thanks.

  • Colour synchronization management

    i'm running adobe bridge cs2 v1.0.4.6 unfortunately it has no 'colour synchronization management'... how can i get the above mentioned program to appear in the bridge center... i've already checked the 'preferences/general tab/favourites item'...but

  • Acrobat9 for 64 bit Vista, program locks up at Form Wizard Import, why?

    I installed Acrobat 9 Pro Complete (30 day trial) Version into my 64 bit Vista PC. After doing one Acrobat program required update to Windows, the program fully installed. When I go to Form Wizard, put in the name of a pdf file to open and click NEXT

  • PI Message Map - useOneAsMany issue with more than 10 lines.

    I am having an issue using 'useOnAsMany' .  I am using this to map lines of text from an idoc, specifically the SHPMNT04 idoc.  When there are more than 10 lines of text (i.g. 10 occurances of E1TXTP8) the sytem drops everything after the 10th line.