Zen Micro Firmware, Drivers etc probl

Only yesterday my Zen Micro crashed and i lost every single music file i had on it (over 900) when i went to sync music back on to it WMP said that it had an unknown error therefore it could not put the music onto my player. I then unistalled the software and since i had lost the disc i got the software from the creative site however it then said my zen was not detected and would not install the software. I left it for a while and came back to fidn that when i turn on the Zen Micro it says firmware problem and brings me straight to the recovery screen. I tried downloading new firmware from the creative site and it says my zen is not detected so it cannot upload the new firmware. I have tried contacting Customer Support and they are no help what so ever so this is kind of my last resort.
Any help is greatly appriciated
Jonny Toye

I think that you have installed to many drivers, and there is an conflict! I will recommend that you try your player on another pc (if possible offcourse).
And i think that you have to Synchronize your player in wmp0.
To format a Zen Portable Media Center:
Connect the player to your PC
Open Windows Media Player 0.
Click on the File button, CDs and Devices, and then click on Synchronize.
Select the Zen Portable Media Player in the Device pane (if you have multiple devices connected), and click on the Format storage media button <IMG height=9 src="http://dmzweb4.europe.creative.com/wwimages/dap/pmc_format.JPG" width=8> </LI>

Similar Messages

Zen Micro Firmware Upgrade/Media Probl

Hi, have upgraded the firmware on my Zen Micro to v2.2.02. SInce the upgrade Zen Micro Media Expolrer will no longer work, as it says it in uncompatable with the device. I now have to load songs via MY COMPUTER and it doesnt have the ease of use and functionality of ZMME. Any ideas what I can do? Thanks in advance.

I've just spotted the sticky on WMP. Not sure what version I have on my lap top. I'll check letr and try this.

Zen Micro firmware update connection probl

Hello,
After a failed firmware upgrade, I decided I needed to reload the OS.
So, I went into recovery mode and tried the update again, but it keeps saying the zen isn't connected.
Any ideas? I'm wondering if I need to re-install the original firmware first (if so, where do I get it from- doesn't seem to be on the disk) rather than upgrade.
Thanks!

Boudica From what I understand (and feel free to correct me if I'm wrong), but you don't really do an "upgrade". When youflash the firmware, you load it completely as opposed to patching things that need attention.My point is this: whether you have new firmware or the original, if you can't connect to the unit, you won't be ableto load either. Does windows recognise it's You could see if it's listed in the list of devices connected to the PC. Cheers

ZEN MICRO : firmware history (in

I'm offering here an overview of the Zen Micro firmware history, as it's impossible to get a full release history from the Creative download website
Please do NOT use this thread to ask for firmware features (etc). Only to clarify what's IN the existing firmware versions, and what the relations are.
Each version contains all improvements from the version it is based on. Note that I'm only mentioning the most interesting novelties per release (IMO). Check the actual release notes on the Creative download site, for official info.
ps: I had this originally in a nice table, but then I discovered that the forum blocks html table tags :-(
Generally speaking :
v line of firmware works with all recent Windows versions, and requires you to install Micro-specific drivers on the pc before connecting the Micro. </LI>
v2 line is so-called "PlaysForSure" (download + subscription) and works only on pc with Windows XP + Windows Media Player 0. You don't need to install any other driver.</LI>
Version: .00.06
- Comment: the version installed on the Micro I bought Dec 4, 2004
Version: .0.03-US
- Released-On: 2 Dec 04
- Based-On: .00.06
- Comment: fixes battery charging (wall plug inserted before player attached) + touchpad sensitivity + lock symbol
Version: 2.00.2
- Released-On: 28 Dec 04
- Based-On: .0.03
- Comment: adds MTP/PlaysForSure support + max 4GB mass storage
Version: 2.0.05
- Released-On: 05 Feb 05
- Based-On: 2.00.2
- Comment: BETA! adds Napster To Go support (for subscription-based services)
Version: .0.03-LB
- Released-On: 8 Feb 05
- Based-On: .0.03-US
- Comment: adds more languages for menus
Version: 2..02
- Released-On: 0 Mar 05
- Based-On: 2.0.05
- Comment: fixes bug regarding N2G song licenses [note: until 27 May, this version was marked BETA on Creative download site]
Version: .02.05
- Released-On: Mar 05
- Based-On: .0.03-LB
- Comment: can be installed over 2.x.xx + minor GUI improvements (lock, volume bar) + max 4GB mass storage + bugfix "lookup artist" + fix redirect to begin of WMA track
Version: .0.02
- Released-On: 06 Jun 05
- Based-On: .02.05
- Comment: reduces standby time to 4 hours (unless the alarm is set) + Fix to charge battery (via USB) on a PC without drivers ("lock-charging") + Russian language + Play continues from position in song where it was stopped, even if player went to deep sleep. (Downgradeable to .02.05 and to 2..02).
- <Warning: this version causes battery draining for many users, and was withdrawn on 0 Jun. The workaround is simply to remove the earphones when not in use. (download + workaround info)
Version: ..0
- Released-On: 0 Jul 05
- Based-On: .0.02
- Comment: has same functionality as .0.02, and fixes the battery draining that caused .0.02 to be withdrawn. (Downgradeable to .02.05 and to 2..02).
Version: 2.20.05
- Released-On: 26 Sep 05 (released by Audible on 5 Sep)
- Based-On: 2..02
- Comment: adds audible (format 2,3,4) support + better PlaysForSure subscription services compatibility + the new features of .0.02/..0: reduced standby time 4 hours + Russian language + lock-charging + always continue playing from previous position in song. Discussion
[bookmark keywords : Zen Micro firmware release history changelog]
Message Edited by fred_be9300 on (mm-dd-yyyy)06-04-2005 + 06-08-2005 + 06-2-2005 + 06-24-2005 + 07-0-2005 + 09-9-2005 + 09-28-2005
Message Edited by fred_be9300 on 09-28-2005 :29 PM

SSR wrote:
It would be kinda short wouldn't it's
It would indeed be very short!
Also, was there any need to quote the entire first post? I can understand you're trying to emphasise a point but...
Well, I quoted the entire first post in a rage of fury, so I did not think, I guess. Sorry!
If you look at the Micro firmware in detail we mostly have two different firmware version, the MTP firmware that was promised, and some bug fixes. That's about all it amounts to.
Yeah, I know - but it is so typical... The ratio between Micro/Touch updates is like ten to one... bloody ridiculous is what it is, anyway.

Creative Zen Micro CD Drivers LOST!!!

I lost my Creative Zen Micro CD for about one and a half year already. Is there anywhere I can download the Media Explorer or the Media Source Organizer? I have downloaded all the drivers and application from the zen micro download links however it doesn't work right. It says it can't detect the mp3 and i don't know what else to do. I really need it bad as i already haven't update my Zen Micro for about one and a half year for now. By the way, I know that I'm not the only one that needs it.
Thanks in advance!!

Updates on my Zen Micro. I tried to do different things with the player by going to recovery mode and accidentally, I press the reload firmware option. I thought that I can upgrade the firmware of my zen micro, however, when I ran the firmware installation i.e Creative Zen Micro PlaysForSure Firmware update 2.2.02 Filesize : 2.32 MB or Creative Zen Micro Firmware ..0 Filesize : 2.03 MB, it said that it could not detect the player, so, there is none firmware in my player. Please, what should I do.. Now, not only i cannot?synchronize my songs, plus, i cannot even listen to the music.

Next Zen Micro Firmware Suggesti

I thought it would be a good idea to have a section where people can put in their ideas for new zen micro firmware updates, as for myself i have 2
. when you select "random play all" from the DJ section it sets your micro to play in shuffle mode, then afterwards when u play music it shuffles the songs you had selected yourself. I think it would be a good idea to add to the next update when "random play all" is off, and one has selected the music on their own it resets to normal mode.
2. the Creative Jukebox Zen had some EQ features that the Micro does not have. It was able to speed up and slow down songs by 2x. as well it had some EQ settings to make songs sound like they were being played in different enviroments, such as bathroom, concert hall, living room and such. I think the next firmware update should have these features included.
Anyone else got some ideas? :P

mikerules,
No, that's not true.
Where exactly did you read that? Do you have a link?
Cat

Zen Micro Firmware Ha

Hi there!
Does anyone knows if there is any Zen Micro Firmware Hack avaliable out there. Not that I dislike the original one, bot I love hack around. I used to have Podzilla (a linux distro) on my IPod and would be nice if there was something similar for my ZM.
Anyway, as a software developer, I could start coding something intereseting (what about a firmware that always use deep sleep? ), but to start, I really need some technical papers about zen's hardware and memory system, since reverse engenering the firmware would take much of my (:sigh busy time...
See ya!
Rafael

It's illegal and probably not a good idea to discuss this here. You can however visit nomadness and see if there is anything on it. I have read people hacking their Zen Jukebox or Zens (not micro) but the hacks aren't that great, most of them only managed to change their menu screens but nothing major.

[Zen Micro] Firmware upgrade has bloc

Hi,
I'm upgrading my Zen Micro firmware from ..0 to 2.2.02 version right now, but it looks like the process has stuck. My processor seems not to be working, the progress bar is no more advancing and the arrows on my player are white. There's a message on the window that says "Rebooting your player. Please wait." But nothing actually happens. What should I do? If I plugged off my player, can I cause it any damage? Should I restart the upgrade? As the 'Close' button is available for clicking, I can assume the process is stoppable and its terminating shouldn't cause damages... can't I?
Please, help me.
Thank you for your suggestions.
haunted

And no software will acknowledge mine since I stupidly upgrade to the 2 level firmware. I've been on a three-week merry go round with email customer service...they've even had me go into the registry of my computer (yikes!) but no solution.

Zen micro firmware on tou

And what about porting zen micro firmware on touch? Zen touch is victim of a very lite firmware... when I say very lite, it's really lite :
no sleep timer fonction, a (only) 4 band equalizer, not detectable as a hard disk by the PC...
But I think that, since December, Creative has really had the time to correct this enormous lack, isn't it's

Okay, okay, It's just a question of money, but, It's not all good for creative, it doesn't make them a good advert, when I speak with my friend, I tell them that, if they ad 50? to their price, theu'd have an Ipod, with a really usefull and full of fonction firmware...
And a second point is that, most of MP3 players consummer are student, (just as me) so they don't have enough money toi buy more than one player...
TitleDate <A target=_blank>[/url]<IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=378 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=73 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=3 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=58 border=0>
. Creative Zen Touch Firmware Upgrade version .0.03 (968.00 KB) 9 Dec 04 <IMG height=8 alt="Download Now" src="http://images.americas.creative.com//images/support/downloads/download-icon.gif" width=3 border=0>Download Now<IMG height=5 alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width= border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=8 border=0><IMG height= alt="" src="http://images.americas.creative.com//images/dot-clear.gif" width=522 border=0>
Oulala, 9 dec 04 !!! they are lauthing at us
Message Edited by antonin on 03-3-20052:9 PM
Message Edited by antonin on 03-3-2005 2:9 PM

Another question about the Zen Micro Firmware Upgr

Hi there,
I have just successfully installed the Creative Zen Micro Firmware .02.05 on my 5GB Zen Micro but I have a question regarding Windows Media Player. The Set up Sync button and some of the properties still appeared greyed out. I thought the upgrade would solve that problem.
Any thoughts?
C.

As per the?BEFORE you post, READ THIS FIRST (FAQ) post, all downloads can be found at Nomadworld.com downloads.

Zen Micro Firmware 1.10.02 to 1.11.01 (issue with instructio

This may seem a little picky. I had previously updated my Zen Micro to firmware .0.02. Now Creative has issues firmware ..0. All fine but my question is:
The applicability instructions for ..0 state:
align=left>You can upgrade from Creative Zen Micro firmware .02.05 or earlier, or Zen Micro
align=left>PlaysForSure? firmware 2.00.2 or later.
So technically I cannot update from .0 to .. Does anyone know if there is a technical reasion or just an oversite in the instructions?
Regards
JoRoFo

It's a bit of an oversight. Creative had actually removed .0.02 from the website just days after it was released because we, the users, found it to be severely flawed. Those instructions were written as though it was never released.
You can update to ..0 from .0.02 without a problem.Message Edited by dingus on 08-8-2005 06:08 AM

Zen Micro Firmware 2.20.05 with Audible suppo

So I was checking out Audible.com to see what devices are listed and I noticed the Zen Micro was there. It was weird because non of the firmwares listed on Creative.com showed Audible Support. So I e-mailed Audible asking what firmware they tested out for the Zen Micro that supports Audible. So they e-mailed me back saying go to this website: <a href='http://www.audible.com/muvo_upgrade.html' target=_blank>www.audible.com/muvo_upgrade.html[/url] (yes it says muvo but that doesn't mean anything). Click on Creative Zen Micro or scroll all the way down. The link they gave was a download from their website as a file named: ZenMicroP4SAudible_2_20_05.zip Now it doesn't take a smart guy to notice that 2_20_05 is the firmware version of the file. And any firmware beginning with 2 is considered the PlaysForSure firmware if going by Creative's convention of firmware numbering.
Only one problem. I dont have a Zen Micro to try it out. And its not even listed on Creative's support pages as a download.
I'm curious and I'm sure many others here are as well, does this firmware fix the battery drain issue? Also does it have any new features or does it fix anything else?
Direct link: <a href='http://download.audible.com/creative/ZenMicroP4SAudible_2_20_05.zip' target=_blank>http://download.audible.com/creative/ZenMicroP4SAudible_2_20_05.zip[/url]
I checked the properties of the file and it is indeed made by Creative, not Audible.
Enjoy!Message Edited by DM on 09-8-2005 09:34 AM

Yup..it's finally here. I recieved a reply from a rep at Creative with a link to Audible to download the new firmware for the Zen Micro. Here is the message I recieved from him. I have already downloaded the new firmware and my Zen Micro works flawlessly with Audible....thank god the wait is over.
Here is the e-mail I got from him...
This Fix just came in from our Best Support rep about 0 mins ago.
He personally tested this with a li've customer and confirmed it working.

John Anderson Audible.com Supervisor

The following are the requirements & instructions to use your Creative Zen Micro with Audible content.

Requirements:

Windows XP SP or SP2 </LI>
Windows Media Player 0 </LI>
Latest version of AudibleManager 4.0 for Audible audio content playback </LI>
Creative Zen Micro player </LI>
Firmware version 2_20_05 or later.</LI>
Install the updated Zen Micro firmware

Visit our Creative Firmware page ( http://www.audible.com/muvo_upgrade.html ) and click on 'Creative Zen Micro'

Download the updated firmware ( http://www.audible.com/software/ ) and click on <IMG height=9 src="http://us.f8.mail.yahoo.com/ym/us/ShowLetter?box=Rebates%20Purchases&MsgId=9269_9984 37_62_209_523_0_32356_88660_3208906486&bodyPart=3& YY=389&order=down&sort=date&pos=0&view=a&head=b&Id x=" width=9 border=0>Download for Windows 2000 or XP.

Choose to Run the software.

When the installation begins, choose 'Creative Zen Micro' as your Mobile Device and then click 'Install.'


<IMG height=620 src="http://us.f8.mail.yahoo.com/ym/us/ShowLetter?box=Rebates%20Purchases&MsgId=9269_9984 37_62_209_523_0_32356_88660_3208906486&bodyPart=4& YY=389&order=down&sort=date&pos=0&view=a&head=b&Id x=" width=355 border=0>


AudibleManager will begin to the installation process and may prompt you to install a Windows HotFix. Please choose to allow this as this is required to be able to use the device properly.

You will then be prompted to restart your computer, please save all documents and restart your computer.

Once your computer is restarted, open AudibleManager. You will be prompted to enter your Audible Username & Password to activate your Desktop & Creative Zen Micro device. After completing the activation process, you are ready to transfer and listen to your Audible content on your Creative Zen Micro device.

Audible content can be located on the device by going to Genres > Audiobooks

Zen Micro Firmware 2.00.12 not list

I got FW v2.00.2 loaded up on my micro. If I wanted to update to a non-beta MTP firmware, which one should I go with?
I'm guessing there isn't any firmware that matches my needs, is there? The download page only lists:
Creative Zen Micro Firmware .02.05 (2.0 MB)
Creative Zen Micro PlaysForSure Firmware 2..02 Beta Release (2.33 MB)

So I'm pretty much stuck with the one I got (ghost lines in volume meter and faulty "Lookup artist" function), right? And why isn't v2.00.2 listed anymore? Maybe to avoid confusion? What if someone was looking for the same as me? v2.00.2 is the version for them!Message Edited by noroom on 03-23-2005 09:9 AM

noroom,
Firmware version .02.05 is a PDE firmware and not a MTP firmware. Also, note that if you wanted to update to version .02.05, you will not be able to downgrade to MTP version 2.00.2 after that but you can go to the beta MTP version 2..02.
Jason

Zen Micro firmware update prob

Hi everyone,
I've got a problem trying to upgrading my Zen Micro Firmware. When it says that I have to wait while it's rebooting the player, nothing happens. When I do it manually, the firmware is still the old one. Does anyone know what I have to do?

I too have exactly the same problem. Micro reboots once, then just sits there doing nothing. I have tried the on/off method ,as you said, it goes back to the old firmware. Having tried to load the update offline with no background programs running I still got the same fault (even leaving it for half an hour.) I have now given up as i am worried that it may corrupt the existing firmware. I have turned of the snooper setting as requested . I think that it shows signs that after the first reboot the computer is not recognizing the players USB. So it may be that after the st reboot the usb may need to be removed/reconnected. But i'm not going to take that chance as you will be losing power when trying to upgrade. Best way to corrupt a download on any item plugged to the USB is to remove it will been accessed.
Still waiting for a reply from Creative.
Having read threads about the new firmware upgrade I think were best to stay with the old one for a little while longer.

Zen Micro Firmware Probl

I recently brought a 6GB Zen Micro, and all was fine, it had setup, etc. all perfectly. after useing it for a couple of days, i looked up about the battery drain due the the 2 hour standby, and attempted to upgraded the firmware.
the update stopped midway through, so i left it to see what happened. nothing after a couple of hours, so i cancelled it.
now when i turn on the Zen Micro, it says "firmware problem", and remains in recovery mode.
i tried "reload via USB" option, but then the firmware installer wont start because "player is not connected" (even though it phyically is)
windows however, does make the noise when you connect a removable dri've, although media player says that no player is detected either.
after reading a couple of threads here nothing seemed to help me.
can i anyone help me? id be really gratful
thanks.

does the micro still work alright? if it works, and the computer will register it, then you probably shouldn't bother upgrading the firmware. if it doesn't work, then i have no idea what to do, and you'll most likely have to contact customer support, and hopefully creative can somehow fix the problem, or help you fix the problem

Zen Micro Firmware, Drivers etc probl

Similar Messages

Maybe you are looking for