Zen Micro - firmware update failed so now "dead"

I have a firmware problem with my Zen Micro. Can anyone help?
The series of actions I have taken so far are these:
I got my Micro in January 2006. I now want to run Audible software to listen to their books so I downloaded the firmware update L6_2_2_02.exe from the Creative support site which is stated as providing the Audible?facility.
I backed up the Micro contents using Creative MeadiaSource Organiser. I then ran the firmware update from my Win XP PC. This started OK and I got a series of messages about what was happening. Then it stopped with the progress indicator bars about 2/3 across. I left it for half an hour and nothing changed so clicked to stop the update.
I checked the firmware version on the Micro and it said 2.2.02. The update?looked OK and the FM worked but of course I had no music content.
I opened my Creative MeadiaSource Organiser (v 3.0.09) but it said no device is connected so I was unable to reload the music. My XP PC recognised the Micro as connected and I checked Device Manager which showed the "device is working properly". I was also able to synch music to the Micro using Windows Media Player and this played OK. I tried another computer and could also synch using Windows Media Player but I wanted to reload my music from the backup.
I looked on the Creative site for the steps to take when a firmware update fails. The Zen Micro is not on the list as supporting the MP3 Player Recovery Tool so I did not use that. I followed the Reload Failure recovery instructions and ran Clean UP, then Format All, but this did not fix it so I ran Reload Firmware on the Micro. This was a big mistake!
Now when I try to run the firmware update from my Win XP PC, I select English then I get the message "Your player is not connected, please connect your player". I checked again and XP still recognises the Micro and the device is working. It is no longer recognised by Windows Media Player but just? appears to XP as an empty storage device.
The Micro now shows the firmware as v 0.0.65, but now it is stuck in Recovery Mode. I have contacted Creative Support but their reply is that this player is now over 3 years old, reached its end of service life, so there is no support other than on their web site. Following their web site recovery instructions got me into this mess so I guess?no extra help is offered from Creative.
The player is now essentially dead. Unless there is some way to get the firmware update program to recognise the device as connected, then I don't know how to fix this. This is a shame as it is a nice little player for my music collection.
Can anyone help as I don't know what to do next?

I have the same problem. I put the screenshots below and the errors that happen to me.I can not put him the firmware because I do not recognize the device.
Both windows xp windows 7 as the
DISPOSITIVO, IMAGEN ACTUAL
http://img528.imageshack.us/img528/3783/dsc0025mv.jpg
EL PORTATIL LO RECONOCE
http://img811.imageshack.us/img811/4323/dsc0026ox.jpg
MUESTRA BATERIA, PULSANDO BOTON DERECHO
http://img546.imageshack.us/img546/4855/dsc0027wj.jpg
ADMINISTRADOR DE DISPOSITIVOS
http://img801.imageshack.us/img801/4501/dsc0028une.jpg
ERROR AL INSTALAR CREATIVE SOURCE
http://img805.imageshack.us/img805/3061/dsc0029io.jpg
http://img208.imageshack.us/img208/9330/dsc0031sn.jpg
http://img545.imageshack.us/img545/7096/dsc0032qg.jpg
MP3 PLAYER RECOVERY TOOL, no me reconoce Creative ZEN MICRO como conectado
http://img528.imageshack.us/img528/1714/dsc0030qn.jpg
PROGRAMAS DESCARGADOS (pagina oficial creative)
http://img341.imageshack.us/img341/2466/dsc0033oi.jpg
DSC_0025.jpg
I need your help. I'm desperate. Uninstall Windows Media Player.
Thanks in advance

Similar Messages

Zen Micro firmware update prob

Hi everyone,
I've got a problem trying to upgrading my Zen Micro Firmware. When it says that I have to wait while it's rebooting the player, nothing happens. When I do it manually, the firmware is still the old one. Does anyone know what I have to do?

I too have exactly the same problem. Micro reboots once, then just sits there doing nothing. I have tried the on/off method ,as you said, it goes back to the old firmware. Having tried to load the update offline with no background programs running I still got the same fault (even leaving it for half an hour.) I have now given up as i am worried that it may corrupt the existing firmware. I have turned of the snooper setting as requested . I think that it shows signs that after the first reboot the computer is not recognizing the players USB. So it may be that after the st reboot the usb may need to be removed/reconnected. But i'm not going to take that chance as you will be losing power when trying to upgrade. Best way to corrupt a download on any item plugged to the USB is to remove it will been accessed.
Still waiting for a reply from Creative.
Having read threads about the new firmware upgrade I think were best to stay with the old one for a little while longer.

Zen Micro Firmware update - Now can't transfer W

I loaded my WMA files to my new ZEN MICRO 4Gb player... Then I signed up for Napster to Go...Said I need a firmware update...did the update...Had reload again...but, now all my transfers of WMA files fail! MP3 files work fine...Anyone have the issue before?

Ever since I upgraded the firmware for the micro, I have been unable to transfer WMAs via Media Player v0 or Creative MediaSource. The error I receive is "An error has occurred while transferring this file". This only occurs on WMAs. MP3s transfer fine.

Zen Micro firmware update, but can't backup files b/c "player is not connect

I want to update the firmware on my Zen Micro 5GB so I can put new songs on it through Creative Mediasource, but the computer won't read the device---all i get is the error message "player not connected." I opened up the firmware download, however, and i am able to install it on the player (somehow now the computer seems to know the player is there--the zen micro responds to the update), but it warns to backup all files as they will be lost in the update. I cannot backup my songs to the computer because it won't recognize the player as connected! What the heck can i do to backup my files?

what in the world? i unplugged my zen micro from the USB port as i was giving up for the night trying to make it work, when i decided to try it one last time. all of a sudden creative mediasource popped up from the minimize and it read my player like normal. very strange...

Jukebox Zen XTRA Firmware update fail

I have a nomad jukebox zen XTRA 40GB. I recently saw an update for PlayforSure on the creative website. As i have done earlier, i had tried updating the firmware. It asked me to backup and run the formware. I sincerely backed up and started the firmware. This went for about a minute and said its rebooting the player which never happened for a nice hour. Now the firmware is not completed and when i try to reload os from the recovery options, the firmware update program says palyer is not connected. I had verified it in DEvice manager. The player is been seen as Nomad Jukebox/ MTP device. I tried starting the player and it says "Firmware Problem". i also tried loading the original firmware which says "Player not connected". I had updated latest driver.
Any help is greatly appreciated

Thanks for the info. I just wanted to know is there anyway Creative has to redo the whole thing. Like removing all of the firmware and rebuild it. I am looking for some tool or some way to remove the incomplete firmware on the player.
Rightnow, my player is just a paper weight for me. I dont want to be used like this..
Please help me further

Zen Micro Firmware Update Probl

hi, i would like to say that i am quite happy with the product i have baught but i would like to upgrade the firmware
im from the UK and the problem is that after much hastle (interfering programs) i finaly managed to upgrade the firmware for my micro (to version 2.00.2),
but when i checked the site
http://uk.europe.creative.com/suppor...s/download.asp
it says there is a newer firmware option (8th febuary 05 version .0.03) although the version number is lower.
can anyone help me by telling me which firmware version i would need to install to have the newest and best running firmware for my zen micro?Message Edited by Tea on 02-2-2005 0:35 PM

well, if everything is fine for you now, don't change at the moment
There is a "newer" BETA 2.0.xx something ( = not stable, and only for experienced computer and player users)
There is a "newer" .0.03-LB version, which is identical to the .0.03-US version but has the menus in more languages.
--Fred

Zen Micro firmware update connection probl

Hello,
After a failed firmware upgrade, I decided I needed to reload the OS.
So, I went into recovery mode and tried the update again, but it keeps saying the zen isn't connected.
Any ideas? I'm wondering if I need to re-install the original firmware first (if so, where do I get it from- doesn't seem to be on the disk) rather than upgrade.
Thanks!

Boudica From what I understand (and feel free to correct me if I'm wrong), but you don't really do an "upgrade". When youflash the firmware, you load it completely as opposed to patching things that need attention.My point is this: whether you have new firmware or the original, if you can't connect to the unit, you won't be ableto load either. Does windows recognise it's You could see if it's listed in the list of devices connected to the PC. Cheers

Zen Xtra firmware update fail

Hi all,
i try to update the firmware to version ZenXtraP4SAudible_PCFW_LB_2_0_03 and the program only say "Player is now rebooting, please wait..." indefinily, and the player not respond no longer anymore (no turn on, no lights, no enter in Recover mode), any suggestion? Tanks.

I'm sure it's of little consolation, but you're not alone...

Next Zen Micro Firmware Suggesti

I thought it would be a good idea to have a section where people can put in their ideas for new zen micro firmware updates, as for myself i have 2
. when you select "random play all" from the DJ section it sets your micro to play in shuffle mode, then afterwards when u play music it shuffles the songs you had selected yourself. I think it would be a good idea to add to the next update when "random play all" is off, and one has selected the music on their own it resets to normal mode.
2. the Creative Jukebox Zen had some EQ features that the Micro does not have. It was able to speed up and slow down songs by 2x. as well it had some EQ settings to make songs sound like they were being played in different enviroments, such as bathroom, concert hall, living room and such. I think the next firmware update should have these features included.
Anyone else got some ideas? :P

mikerules,
No, that's not true.
Where exactly did you read that? Do you have a link?
Cat

Firmware update failed hdd not recognizing now

my 1tb mypassport was working perfectly fine untill i tried to upgrade firmware. it failed and now hdd is nor being recognized. no ticking sound. lifht turns on windows vive usb conection sound but nothing appears no error or driveplz help me.i have very iortanr data on itthanks

The drive is probably bricked. I only do the firmware updates if there is a problem with the drive or a security issue. Sometimes if it ain't broke don't fix it is the best policy!Joe

Zen Micro Firmware problems ***FIXED

Like many of you I had the problem of updating my firmware, only to have it fail and then read "Firmware error" when you try to restart the device. The end result is what appears to be a dead Zen Micro and the PC cannot recoginze it. Well with the help of SSR I finally fixed the problem.
** Please note I am using Windows XP Pro with Service Pack 2 installed
"Firmware error"
The way to fix it is simple. Download and reinstall Windows Media Player 0. I already had it installed, but I reinstalled it anyway. Then go into your Device Manager and right click on your !Creative Zen Mirco and update the drivers. The system will now find the new drivers (MTP?MPT?) and you have connectivity with your Zen again.
Now you'll want to rollback the firmware to .0. You can try to do 2.2 but it will fail every time because the device thinks you already have it, and overriding it will result in "firmware update failed".
Once you have .0 installed again, you can then update the firmware to 2.2.
After it is installed, take out the battery and boot into recovery mode. Choose REBOOT as your option and nothing else. This will rebuild the file library and complete your firmware upgrade.
Now you have a Zen Micro 2.2 that your COMPUTER will detect but your software will not. That said, you need to go to the download section and download the following software.
Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource (9.72 MB)
Creative MediaSource Player/Organizer 3.30.2
Creative Zen Micro Media Explorer Web Update
Creative MediaSource Plugin for PlaysForSure devices (version .00.8)
I reccomend installing then each one at a time, then rebooting as the system says and moving on to the next one.
When you are all finished, plug in your Zen Micro and it should be working. Let me know if you have any other questions.
Message Edited by eazysct on 2-3-2005 07:50 AM
Message Edited by eazysct on 2-3-2005 08:27 AM

dennis75 wrote:
Hi,
I also have the problem with the recognition of my zen micro by my PC.
It started when I tried to update to firmware version 2.2.02.
During the update-procedure... it would not go any further, so after half an hour of waiting I clicked on close.
Since then My pc does not recognize my zen!!
When I look at my info in the zen it says it has 2.2.02 installed.
I have tried the following already:
) Install firmware ..0 -> Did not work because it says: please attach zen.
2) ReInstall MediaPlayer 0 -> Did not work... still: "no machine attached".
3) Go to device manager and update driver -> Here it can see the zen and i updated the driver, but still..when I try to update the firmware back to ..0 it says: please attach zen.
PLEASE HELP!!!
Best regards,
Dennis
Just to eliminate one possibility: do you have Windows XP with Service Pack or 2 and Windows Media Player 0 installed on your computer? The reason I ask is that Version 2.x firmware will not work with other versions of Windows or WMP.

Zen Micro Firmware 1.10.02 to 1.11.01 (issue with instructio

This may seem a little picky. I had previously updated my Zen Micro to firmware .0.02. Now Creative has issues firmware ..0. All fine but my question is:
The applicability instructions for ..0 state:
align=left>You can upgrade from Creative Zen Micro firmware .02.05 or earlier, or Zen Micro
align=left>PlaysForSure? firmware 2.00.2 or later.
So technically I cannot update from .0 to .. Does anyone know if there is a technical reasion or just an oversite in the instructions?
Regards
JoRoFo

It's a bit of an oversight. Creative had actually removed .0.02 from the website just days after it was released because we, the users, found it to be severely flawed. Those instructions were written as though it was never released.
You can update to ..0 from .0.02 without a problem.Message Edited by dingus on 08-8-2005 06:08 AM

Zen Micro Firmware 2.20.05 with Audible suppo

So I was checking out Audible.com to see what devices are listed and I noticed the Zen Micro was there. It was weird because non of the firmwares listed on Creative.com showed Audible Support. So I e-mailed Audible asking what firmware they tested out for the Zen Micro that supports Audible. So they e-mailed me back saying go to this website: <a href='http://www.audible.com/muvo_upgrade.html' target=_blank>www.audible.com/muvo_upgrade.html[/url] (yes it says muvo but that doesn't mean anything). Click on Creative Zen Micro or scroll all the way down. The link they gave was a download from their website as a file named: ZenMicroP4SAudible_2_20_05.zip Now it doesn't take a smart guy to notice that 2_20_05 is the firmware version of the file. And any firmware beginning with 2 is considered the PlaysForSure firmware if going by Creative's convention of firmware numbering.
Only one problem. I dont have a Zen Micro to try it out. And its not even listed on Creative's support pages as a download.
I'm curious and I'm sure many others here are as well, does this firmware fix the battery drain issue? Also does it have any new features or does it fix anything else?
Direct link: <a href='http://download.audible.com/creative/ZenMicroP4SAudible_2_20_05.zip' target=_blank>http://download.audible.com/creative/ZenMicroP4SAudible_2_20_05.zip[/url]
I checked the properties of the file and it is indeed made by Creative, not Audible.
Enjoy!Message Edited by DM on 09-8-2005 09:34 AM

Yup..it's finally here. I recieved a reply from a rep at Creative with a link to Audible to download the new firmware for the Zen Micro. Here is the message I recieved from him. I have already downloaded the new firmware and my Zen Micro works flawlessly with Audible....thank god the wait is over.
Here is the e-mail I got from him...
This Fix just came in from our Best Support rep about 0 mins ago.
He personally tested this with a li've customer and confirmed it working.

John Anderson Audible.com Supervisor

The following are the requirements & instructions to use your Creative Zen Micro with Audible content.

Requirements:

Windows XP SP or SP2 </LI>
Windows Media Player 0 </LI>
Latest version of AudibleManager 4.0 for Audible audio content playback </LI>
Creative Zen Micro player </LI>
Firmware version 2_20_05 or later.</LI>
Install the updated Zen Micro firmware

Visit our Creative Firmware page ( http://www.audible.com/muvo_upgrade.html ) and click on 'Creative Zen Micro'

Download the updated firmware ( http://www.audible.com/software/ ) and click on <IMG height=9 src="http://us.f8.mail.yahoo.com/ym/us/ShowLetter?box=Rebates%20Purchases&MsgId=9269_9984 37_62_209_523_0_32356_88660_3208906486&bodyPart=3& YY=389&order=down&sort=date&pos=0&view=a&head=b&Id x=" width=9 border=0>Download for Windows 2000 or XP.

Choose to Run the software.

When the installation begins, choose 'Creative Zen Micro' as your Mobile Device and then click 'Install.'


<IMG height=620 src="http://us.f8.mail.yahoo.com/ym/us/ShowLetter?box=Rebates%20Purchases&MsgId=9269_9984 37_62_209_523_0_32356_88660_3208906486&bodyPart=4& YY=389&order=down&sort=date&pos=0&view=a&head=b&Id x=" width=355 border=0>


AudibleManager will begin to the installation process and may prompt you to install a Windows HotFix. Please choose to allow this as this is required to be able to use the device properly.

You will then be prompted to restart your computer, please save all documents and restart your computer.

Once your computer is restarted, open AudibleManager. You will be prompted to enter your Audible Username & Password to activate your Desktop & Creative Zen Micro device. After completing the activation process, you are ready to transfer and listen to your Audible content on your Creative Zen Micro device.

Audible content can be located on the device by going to Genres > Audiobooks

Firmware upgrade failed, printer now say i has firmware version 0. attention light lights up

Hey all
I had a problem printing a pdf on my mac, and then tried to upgrade my mac driver and printer firmware.
But the firmware upgrade failed for some unknown reason. And now the printer just have the ready and attentions lights on constantly.
I have tried to restart and reset the printer many times, and tried the HP firmware upgrade utility several times, with no luck. It just say it was "failed to upgrade"
Any idea what to do ??
My printer is a HP Laserjet Pro CP1025nw
Thanks
Jan

Hello Jan
It definitely sounds like the firmware update failed. Firmware is like a devices Operating System. Without it, it can't do much. This is backed by the "failed" message and that your printer reports it has version 0.
The printer will need to be serviced. Please call HP Phone Support at 1-800-474-6836.
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.

[Zen Micro] Firmware upgrade has bloc

Hi,
I'm upgrading my Zen Micro firmware from ..0 to 2.2.02 version right now, but it looks like the process has stuck. My processor seems not to be working, the progress bar is no more advancing and the arrows on my player are white. There's a message on the window that says "Rebooting your player. Please wait." But nothing actually happens. What should I do? If I plugged off my player, can I cause it any damage? Should I restart the upgrade? As the 'Close' button is available for clicking, I can assume the process is stoppable and its terminating shouldn't cause damages... can't I?
Please, help me.
Thank you for your suggestions.
haunted

And no software will acknowledge mine since I stupidly upgrade to the 2 level firmware. I've been on a three-week merry go round with email customer service...they've even had me go into the registry of my computer (yikes!) but no solution.

Zen Micro - firmware update failed so now "dead"

Similar Messages

Maybe you are looking for