Zen Micro Freezes at recovery mo

Hi,
I can get to recovery mode fine, but after that it freezes for any of the 4 options. For example If i select clean up. I get to next screen and select yes. Then it says scan disk and it stays there for hours. I also tried to update the firmware but my computer would not recognized the device. Please help
Message Edited by roclay on 09-26-2006 2:44 AM

Any idea what to do?
Pls help.

Similar Messages

Zen Micro Freezing and recovery m

Hey folks,my zen micro is about two and a half years old and suddenly the other day it stopped responding and went into recovery mode. i hav clicked on clean up - nothing happens, format all - it freezes, reload fireware - it freezes and finally reboot - and i am brought right back where i started. When i?plugged it into my pc it became unstable and noticed that all my music had been deleted and the computer doesnt always recognise my zen. I downloaded a new fireware from this website and tryed to install it's but it wouldn't let me saying that there?was a program associated with the mp3 open and to close?the program?first and i dont know what that program is. this all just happened today, one day its working fine and the next i have lost everything. can anyone please give me advice. Thanks,Stephen

I have the Zen Vision M and I am having the exact same problem! I cannot fix my zen. And when I try to download the firmware from this site, the site does not recognize my zen!

Zen Micro freezes when boot or in recovery m

In brief, my Zen Micro freezes at booting up or in recovery mode.
It stops at the "Creative" logo. I've tried to do everything in the "Recovery Mode" but none ofthem seems to run. Tried "Disk Cleanup" but it stucks at "Scanning Disk..." and stays on and does nothing. I know it is supposed to show you the status in percentage, but it doesn't get to that point. Tried "Formatting" but it displays "Formatting..." and stucks and does nothing. It is able to"Reboot" but upon rebooting, it freezes at the "Creative" logo screen again.
During the time it's turned on, the computer would not recognize the player as "connected", I couldn't do firmware flash/upgrade. The computer also won't recognize as a removable storage. The Zen Microis in perfect condition, I haven't dropped it once, bought it for less than 2 weeks. Current version of firmware is .0.03 (as i recall). model # DAP-MD0004
Any comment is greatly appreciated!! Thanks =)
ps.
and yes, my battery drains when the player is off (and not in standby mode), with or without headphone plugged in.

Hi kaic,
My Zen Microphoto has exactly the same problem you described. What I like to know is if you got it replaced or if somehow you could fix it yourself. And if Creative replaced it, which they said the problem was?
Thanks a lot,
Fer

Zen micro stuck in recovery mode

Hi
zen micro frozen in recovery mode and i downloaded new firmware on to my pc
but it wont even open im at a loss at what to do any help much appriceated

Have you tried to reset it using a pin of some sort? Or something sharp? Or try taking the battery out and put it back if it doens't have a reset button. It'll do the same thing
WHAT TO DO AFTER:
I did have a problem like this though, and it seems to be common when in Recovery Mode.
Before connecting to USB, first open the firmware update (Don't connect it before hand). When it says to connect, do so, but not before, and then select Update.
I hope this helps Message Edited by flame on 02-09-2006 :39 AM

Zen Micro Freezes when I plug in USB cable+USB not recognized at ti

Ok, I know you, the reader, has heard this complaint posted over and over on the Creative forums, and you would probably tell me to SEARCH THE FORUMS. Well, I did, and I found no answer or solution to my problems. So..here goes nothing.
I recently purchased a Black 5gb Creative Zen Micro, I was really content and happy with it...that is until I plugged it into my USB 2.0 Card. The moment I do that (I've tried plugging it in into every USB 2.0 slot, and NO, this isn't a hub, but a PCI card), The Zen Micro freezes! I have to resolve this by removing the cover and taking out the battery, then reinserting the battery. At the same time my Zen Micro freezes, a little bubble pops up on my computer screen saying "USB Device Not Recognized". I'm going absolutely out of my mind here, and am on the verge of returning the Zen Micro, and might get a replacement, and if that doesn't work, just returning the Zen altogether for a refund and getting a Rio Carbon. I really like the Zen, so PLEASE PLEASE help me out here!
Things I've Tried That Did Not Work:
-Uninstall/Reinstalling Zen Explorer, Mediasource (basically everything on CD)
-Updating the drivers for Zen Micro found on Nomadness.net
-Updating Firmware for Zen Micro
-Going into rescue mode and cleaning up, Formatting, reloading firmware, and rebooting.
-Trying the USB 2.0 Card in different PCI Slots
-Rotating the order in which I connect the USB cable to Zen Micro and PC
-Uninstalling/Reinstalling the drivers, even when the Zen Micro pops up as "Unknown Device"
-Reading tips/hints on Nomadness.net
I have scoured the forums, and have not found anything useful or new. I know its not the USB 2.0 Card's problem, since I plugged in my USB mouse into all the ports on the USB Card, and it worked fine.
Note: When I plug the USB cable that came with the Zen Micro into the integrated USB slots on the motherboard (USB .), it at times, does work, but even then, not a high chance of it happening. Even if I do successfully connect the Zen to a USB . slot without it freezing up, the Zen ends up not being detected by any program, like Window Media Player, Mediasource, or Creative Zen Micro Explorer.
I am going out this weekend and am gonna try to buy a new USB Cable, and if that doesn't work, returning the cable, and returning the Zen Micro to be replaced. AND IF THAT DOES NOT WORK...GOODBYE CREATIVE! HELLO RIO! But please, any help you guys could give would be greatly appreciated. I will also try to contact Creative Customer Support, but I doubt they'll tell me anything new, if I could even connect to them without being put on hold.
System Specs:
Windows XP Professional SP2
Creative Zen Micro Firmware .02.05
USB 2.0

Yep, that's exactly my issues to.....no matter what I've done, including replacing the USB 2.0 card which WAS and Adaptec DuoConnect 2.0 card which works fine with every other USB device ever connected to it, the Zen Micro 6g is NOT recognized by Creative Media Source or WMP. It is only recognized by the PC in Device Manager, and it has a yellow marker on it, which tells me the drivers are not installed. I know I don't need the drivers installed, but even after installing them, it tells me the drivers are not installed.
However, the answer is: it's definitely not the Micro, since it works flawlessly on my other PC and on my Toshiba notebook. So, it's some compatibility issue on that one PC. Since I refuse to let things be, I am reformatting that PC, reinstalling from scratch with WinXP and sp2. This PC has WinXP Pro but it has other issues so a reformat is in order anyway. Hopefully, this will resolve the issues. If not, then I say it's incompatibility with the Intel 865Perl m.b. But I'm at a loss as to why it won't work when plugged into the Adaptec card too.

Zen Micro freezes on creative lo

My creative zen micro freezes on start up at the creative logo. I see this is a popular problem, and yes I hear clicking of the hard dri've. I've only had it two weeks and this isn't cool. I would recommend a Rio. In the creative warranty it says does not cover any "Damage from external causes such as floods, storms, fires, sand, dirt, earthquakes, an Act of God, exposure to sunlight.." Geez, I sure hope they don't consider this an act of god. Now, I must wait the 2+ weeks for my replacement. Not a happy customer.
Btw, has anyone fixed this problem? It doesnt seem so.

Yea, I've read the FAQ and troubleshooting. I can get into rescue mode but when I select any option it then freezes along with more clicking. I've spent the last two hours reading about this, I'm quite certain it's hard dri've failure/sticking. My last mp3 player got stolen and I had to wait a week to receive my zen micro in the mail. Now I have to wait another few weeks to have it fixed. I need it at work, so my life sucks without my mp3 player. This is very not cool. Thanks for your reply, btw. Unfortanetly, I don't think there is anything I can do.

Zen Micro Freezing While Play

My Zen Micro is my second MP3 player. My first one was a 2.5 GB Rio Nitrus. It was everything I needed it to be until it started acting funny. It froze up a few times while playing. Then I went on vacation and a week later when I got back and tried to use it, it froze again only this time it wouldn't restart correctly. I'm worried that I might be coming into a similar problem with my Zen Micro. It has never frozen until today. I hadn't used it in a week, similar to what happened when my Nitrus went on me. It paused for about 20 seconds when I was running on the treadmill, and then later, it completely froze. The only thing I could do to reset it was take the battery out of the back. It appears to be fine now but it has me worried. Is there anyone who owns a Zen and experienced similar problems and should this be something I worry about? It especially ticked me off today because I just spent $20 last night for a new holster and belt clip for it. Anyone have any input?Message Edited by diesel6304 on 0-06-2006 08:29 PM

It might be because you were running on the treadmill and you experienced "head crash", where the heads reading the HDD inside your Micro hit the HDD itself. Best to not do that. I use it on the treadmill, but I only powerwalk on the treadmill......
Oh yeah, in addition, it's normal every now and then for it to freeze (okay, not normal normal, but unless it's doing it regularly, it's not really that much to worry about). I would suggest running a disc cleanup from the recovery mode.Message Edited by RMskater on 0-06-2006 0:53 PM

Zen micro freezes: share your experie

Please share your experience with Zen Micro's hard disk problems with me.
Unfortunately the beatiful zen micro i bought almost two years ago, is in a state of coma. It froze up and no option on the recovery mode could change that state.
I know that a lot of you guys had/have the same problem, given the amount of help-threads.
I sent the player to the shop since we have a two-years-warranty in Germany. The shop kept the player and refuses to exchange/repair my player.
So I am about to contact a lawyer to sue the shop.
Any evidence to support my case ? your experience with the freezing micro ? will back up my case.
Thanks in advance!

Issue appears to be resolved. The following is the instruction set sent by Creative Labs that I followed:
. Ensure that the player is turned off.
2. Remove the battery.
3. Move and hold the Power button to the Power On position and re-insert
the battery to the Zen Micro. Hold the Power button until the rescue
mode appears.
4. After 2-3 seconds the rescue menu will be displayed.
At this point the battery can safely be replaced and maintenance options
performed.
5. Four options will be displayed on the LCD screen:
? Clean Up - (To rearrange your stored data)
? Format All - (To format and remove all data)
? Reload Firmware - (Reloads your player's operating system - Do not
choose this option unless you have downloaded a firmware update from the
Creative website)
? Reboot - (Restarts your Player)
6. Select the Clean Up and then the Reboot option.
Now, please try turning off the player.

Zen Micro freezed when syncing, now freezes when trying to reload or upgrade firmw

Got a Zen Micro, firmware 2..02
I started having problems syncing with my home PC, which uses XP SP2 with Windows Media Player . Trying to sync resulted in a freezed WMP an, after a while returned an error saying it couldn't communicate with Zen Micro or just showed that all the files to be transfer had been stopped.
Tried to sync in my office, XP SP2 with with Windows Media Player 0. It worked a bit better: could transfer files, but the speed of the transfers was unusually slow for USB 2.0. It ended with the WMP freezed and, after a while, all the files I use for testing where in the player.
In both computers, when the WMP freezed, the signal in the player remained with the lines in black, as if it was still communicating. I had to disconnected the player, disregarding the signal, which remained even with the player disconnected from the PC. When powered up the startup process ended in the "Creative" screen staying on forever, I had to remove the battery, go to recovery mode, Reboot the player and, after a library rebuilding it worked.
Read some threads and thoght that reloading the firmware would help. But the sign "erasing firmware" doesn't dissapear in my player's screen. I gave up after 2 hours. At that point, my player starting showing a "firmware error" at startup and going to the recovery screen every time it is powered up.
Tried to upgrade firmware. It gave a "player not connected" error using my home PC (WMP ) but not in my office (WMP 0). I try to "re-upgrade" to 2..02 but it returned a "failed to upgrade firmware" error (after a few minutes with the window freezed) and the player remained in "communicating" status (black lines in the screen's icon). Try then to "downgrade" to last .xx firmware version available, but the operation hangs after the "format completed successfully" message, with only two bars in the progress indicator, and it stays like this for a very long time (tried for 30 minutes), still with the communication black-lines-in-icon status.
If I try to re-run the firmware upgrade inmediately, it says "your player is not connected, please reconnect your player", as it is still in "communicating" status. I have to take battery out and reinsert it to be able to restart the firmware proess.
Any suggestions? I'm really restricted to not to send the player to Creative Customer Service, as it has just finished it warranty period and I'm nowadays in Argentina, from where the post cost would be huge.
Message Edited by raft on 08-4-2006 04:30 PM
Message Edited by raft on 08-4-2006 05:47 PM

Anyone from the Creative board or the guru around has an idea of what can I do?
would be really appreciated.

Creative Zen Micro - Freezes when 'Rebuilding Library', does this spontaneous

I'll make this post short and sweet.
Yes, I have read the FAQ.
I'm just wondering, its happened to me twice now that when i turn on my zen micro, it goes straight to the rebuilding library screen, and when the bar gets to the end it just freezes. Replacing the battery does not help. Only until i attach it to my computer at home does the library finish rebuilding. And no, on both occasions the battery was not dead. I just found out now about recovery mode and disk cleanup.
Now, considering this disk cleanup fixes the problem next time it arrises, why is this problem happening in the first place? How can I avoid it from happening?
I'll probably be returning this product if I'm forced to replace the battery etc each time i want to use it.
Sorry for my broken english

I have had a very similar problem with my 5GB Zen Micro. I have not added music to the player in weeks but during a cold boot a couple of times a week the player will not start clean, many times hanging at the end of a library rebuild.
The player is always shutdown orderly, though most of the time it's via the 4 hour firmware shutdown included in the ..0 firmware. Each time it hangs I boot to rescue mode, run a clean-up, then reboot. During the reboot it always runs a successful rebuild, so I wonder, why didn't it do that last time and why does it keep acting up when nothing has been added or deleted to the player?
One additional note, sometimes during the boot it will hang with the ZEN screen only partially displayed.
I just deleted the firmware and reloaded ..0. Hopefully this fixes it, but stay tuned for updates...
Thanks,Doug

Zen Micro stuck in recovery mo

I have had my Zen Micro for sevral months and it recently just froze on the recovery mode screen. i cant turn it on or off but i can do the functions on the recovery mode. BUT none of the functions do anything. i tried reinstalling the firmware, but it freezes my computer halfway through the insallation, reboot just turns it off the back on again t the same screen, clean up freezes the player and the other option does nothing either. what can i do, as the uk customer support services doesnt work and i have only been sent an automated email telling me to do what i already have done. is this like the problems the other people discribe and they havd to bin theres, but mine does not seem to be makeing the humming noise.

ok it does make the humming oise but stops after a while and then goes to the recovery mode screen
YOU ARE MY ONLY HELP AS CREATIVE WILL NOT REPLY TO ANY OF MY EMAIL. AND THERE CUSTOMER SERVICE NUMBER WILL NOT WORK
DOES ANYONE KNOW HOW TO CONTACT THEM.

ZEN MICRO FREEZES ON CREATIVE SCR

argh.i need help.i turn on my zen micro and it starts up as usual but then freezes on the creative screen and doesn't do anything. i've tried going into recovery mode, i rebooted and that didn't work. so i reformated and that didnt work either :S?i really dont' know what to do.it also isn't recognised by my computer!!?i've only had it for a few months... but i can't find my receite for it. Is there anyother way i can use my warranty without having to have my receit's?Please help.

I am having the same problem, we have tried absolutely everthing and nothing has worked. We have given up now and are going to buy a new one. My Microphoto lasted 4 months -I tried to say under the sale of goods act that there you would expect an MP3 player to last longer than that but these big companies don't give a stuff. Sorry not to have been more positi've. If anyone out there dose have any ideas please help us!

Zen Micro freezes on Creative L

just tried to turn on my micro, creative logo comes up and freezes, nothing happened. followed instructions on how to perform clean up, the clean up screen also freezes once i clicked yes to cleanup. any way to fix this. im frustrated, dont wanna format and lose all my 600 mp3s and tags <IMG alt=Sad src="http://www.nomadness.net/modules/Forums/images/smiles/icon_sad.gif" border=0> please help


the player doesnt make any click sounds, as soon it starts cleanup, it freezes or at least seems like it. i been waiting for 20 min and it stays the same.

What it comes down to is, there is not much us consumers can do. My dri've has the same problem as the two of yours. We cannot detect the dri've via USB, so that cancels out any firmware update or any recovery software that might be availavle to us. Atleast I think so.
As for what can be done with the unit itself, nothing much. When loaded normally, it freezes at the second screen with the creative logo.
In recovery mode, the unit is not frozen unless you make one of the four selection, all of which lead to a frozen state.
This is how my player crashed. I just finished charging it fully, and decided to change the songs on the zen micro. I connected it to my usb port while it was on. The plug and play screen appeared as I ran the Media Source Organizer program. The PnP screen with the partitioned blocks would not go away. So I was forced to remove the battery, and from that point I've had the stalling problems.
One thing to note is that when i connect the player to the AC adapter, the hard dri've makes clicking noises. This lead me to believe that any function relating to the hard dri've will fail. example: connecting to the PC, formatting, clean up.
Only the basic recovery BIOS which doesn't use the hard dri've is attainable.
I hope Creative will "REVEAL" to us a solution for this. I already paid shipping once for the unit. I hope I don't have to pay to return and then ship it again.

Zen micro - freezes up complete

alright well. a while ago, i was syching my music to my zen micro but it was freezing up the media player and it would stop when it was halfway done, so i just unplugged it from my computer and turned it off. now, when i try to turn my zen on, it goes to the "rebuilding library" screen, then to a song, where it freezes. sto
ps.
nooothingggg happens. i try to press a button, it doesn't do anything. it plays no music. i try to turn it off, it doesn't. i have to actually take the battery right out of the back just for it to turn off. when i plug it back into my computer, it turns itself on like it should, but then it rebuilds the library, goes to a song, and freeezes, and the computer says it's not connected.
dear god, please help me.

Mine just did the same this weekend .. But there is Good news !!! ..
If you go into recovery mode and select Clean up all is good
I first cleaned up then re-started , the zen does another library re-build .. then all seems to work after that ..
See below :
How do I enter Recovery Mode on my Zen Micro?
To go into Recovery Mode
Take out the battery, press and hold the ON/LOCK button in the ON position and put back the battery back.
Wait until Recovery Mode appears on the display
You have the following options
Clean Up - (To rearrange your stored data)
Format All - (To format and remove all data)
Reload Firmware - (Reloads your player's operating system - Do not choose this option unless you have downloaded a firmware update from the Creative website)
Reboot - (Restarts your Player)
Sads

Zen Micro freezes on USB connect

The other day, I hooked up my Micro to my computer to transfer some files. Part way through, it errored out, saying the connection was broken (or something to that effect). Since then, every time I plug in the Micro to my computer it just freezes up; I have to remove the battery to reset it. It still played normally, though, as long as I didn't connect it to my computer.
I went into recovery mode and did the Clean Files and Format options, but it still has the same problem (and now I have no music on it to play). I'm afraid of resetting the firmware since I can't connect it to my computer. Any ideas on how to fix this thing?Thanks.

Yea, I've read the FAQ and troubleshooting. I can get into rescue mode but when I select any option it then freezes along with more clicking. I've spent the last two hours reading about this, I'm quite certain it's hard dri've failure/sticking. My last mp3 player got stolen and I had to wait a week to receive my zen micro in the mail. Now I have to wait another few weeks to have it fixed. I need it at work, so my life sucks without my mp3 player. This is very not cool. Thanks for your reply, btw. Unfortanetly, I don't think there is anything I can do.

Zen Micro Freezes at recovery mo

Similar Messages

Maybe you are looking for