Zen Micro: I'm new and need some h

I got my creative zen micro a few weeks ago and I have some questions.
I'm using Plays For Sure from MSN. Now that I've downloaded that do I always have to use it's Can I subscribe to other services like Rhapsody?
Is there any help for organizing my music? I try to make a new playlist and it shows up on the computer and says it's syncd but I can't find it on my micro.
I have some workout selections with voiceovers like cardio coach and some motivational speeches. Is there a way to isolate those so I can still use the shuffle feature and dj type features without those getting into the mix?
There's a small square of some kind in the upper right corner of my screen with a "" in it. What is this?
This is so confusing for me.

I'm using Plays For Sure from MSN. Now that I've downloaded that do I always have to use it's Can I subscribe to other services like Rhapsody?
In theory yes. I don't know how well the Micro works with tunes from different stores on it, but I've yet to hear that people have had problems.
Is there any help for organizing my music? I try to make a new playlist and it shows up on the computer and says it's syncd but I can't find it on my micro.
This is the only thread I know about playlists with WMP0 and the v2 firmware. Have a look and see if it hel
ps.
You can of course create playlists with MediaSource and ZMME, but you must get the updated versions for the v2 firmware from Nomadworld.com downloads.
I have some workout selections with voiceovers like cardio coach and some motivational speeches. Is there a way to isolate those so I can still use the shuffle feature and dj type features without those getting into the mix?
No. It's been a longstanding wishlist item.
There's a small square of some kind in the upper right corner of my screen with a "" in it. What is this?
It's a play mode. There are various play modes that you can use, so that the queue does different things e.g. play randomly. The one you have selected is Repeat Track. To change the play mode from the queue press the menu button (bottom right-hand corner) then scroll down to play mode, select it and change.

Similar Messages

I'm new and need some help.

Hello Everyone,
I bought my Lenovo 3000 last August and the keyboard letters started rubbing off and when I called they said it send it in. I sent it in and all of a sudden I had a liquid spill. I only had the computer less than three months. I never even spilled liquid on the laptop. Then all of a sudden my computer was returned with a new keyboard. Nothing else was said about the liquid spill.
Fastforward. My computer started acting weird in April 08 and I called to get help. For two months they had me downloading things from their site saying it would work. I finally got someone to help me then they said my warrenty was up, I had to send all my information in again and then I sent in my computer. When I sent it in, I didn't hear anything for a week and then I received a call and a massage saying I had liquid spill. I never wasted water on the computer or any other liquid. They told me it was going to be 800.00 plus change to fix and said they wasn't doing anything to the computer without me paying up front. This was just about the amount I paid for the laptop. Since they sent the laptop back, it doesn't work. Now my keyboard doesn't work and I don't know what to do. My warrenty has now expired on 8/16. Does anyone know where I can get my laptop repaired?

Thank you for responding. This is my first computer/laptop. I didn't know I could have requested that. I can't send it back now b/c my warrenty is up. Does anyone know of a good repair place then or is this a lost cause?

New and needing some help PLEASE

I just bought a iPod Nano. I went to install the itunes but it wil not let me because I don't have windows 2000 or vista or whatever it takes. I have Windows ME. Is there any way to still download itunes for windows me?? Or if not what should I do?? Any help would be greatly appreciate!!!!

Here are some of the programs taht claim Windows ME comatability for you to check to see if any suit you.
Yamipod
http://www.yamipod.com/main/modules/home/
Foola
http://www.floola.com/modules/wiwimod/index.php?page=WiwiHome
anapod
http://www.redchairsoftware.com/anapod/

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit content without actually downloading the explicit songs?

I'm new to itunes and need some help. Can anyone tell me if it is possible to download an album which has explicit songs without actually downloading the songs that are explicit?

See if there's a non-explicit version and download that? Just download the individual songs you want, and not the others?
Honestly, your phrasing doesn't make sense. You're asking how to download an album without downloading its tracks?

Replaced zd8000 motherboard and need some troubleshooting help please............

Hello All,
I just replaced the motherboard on our HP zd8000 (pentium 4, 3.0ghz, 2gb ram, Win XP) with a used but tested good MB and need some help with the following.
1) I now cannot play DVD movies as the error no "dvd decoder" present which was not an issue before? Where can I go to get a free decoder that will work, as Windows only shows paid versions? We have the dvd burner/reader with lightscribe. SOLVED! CNET HAD DECODER.
2) The internal temperature, according to SpeedFan, is running around 140 degrees with just some Internet browsing. Is that a normal temperature because I only have one of three fans running on the laptop? Is there anyway of making all three fans run to be sure there are no issues? I am positive I hooked up everything but again only one fan seems to be running?
3) I discovered some of the pins were damaged in the card reader. I may get the Seller to give me a discount, no intention of tearing it apart simply for that, but is there any concern of short or otherwise?
4) Our battery stopped charging years ago, these were notorious for such, but I purchased a new one last year and hoped the replacement MB would allow charging again. No such luck though. Is there anything I can do, BIOS update etc, to make the battery charge?
5) Anything you folks can think of for me to test to insure the new motherboard is working properly?
Thanks, Ralph
P.S. This was a correct replacement board according to MB serial numbers. Everything else seems to be functioning properly other than mentioned. Our graphics went out on the original MB.
This question was solved.
View Solution.

Some of the wires had pushed out of the harness that connected the other two fans. I double checked and re-attached those so now the laptop is running quite a bit cooler.
EVERYTHING IS GOOD TO GO!

I have project I want to run and need some information

Hi
I have project I want to run and need some information about technical, consultancy, architecture design
and what I need for this project (hardware and software(
I planning to stream live streaming 24 channels,
The feed is analog from pal STB cable or satellite.
I want to stream in 2 different resolution and bit rates
1. full screen 750-850k
2. 240x360 400-600k
the format is flash h.264
The channels are series, sport, news, and movie.
What recommended card (i have osprey 450e)?
What kind of requirement of computer I need (CPU, MHZ, CORE, RAM).
can i use i7 cpu or xeon cpu?
how many channels i can run in 1 computer?
I need cheap solution for this project around 20-30k$ for hardware.
thnaks

I am working on a similar project.
Actually, i can encode 2 streams in h.264 with a resolution around 640X480 on a Intel Xeon E3120 (2 core) 3.16 GHZ configuration.
OS is a windows XP 32 bits. CPU usage is around 75%.
(note: FMLE instances are run with FMLEcmd not GUI mode)
Does someone know if i can gain performance with windows XP 64bits ?
My goal is to encode 4 streams on a single machine, does someone know if a dual CPU, let's say 2 X (4 core) Xeon, is enough ?
I don't know if FMLE support multiple processor with multiple core configuration.
I am maybe wrong, but after reading this forum, it seems many people have problems using FMLE under windows vista. Do we gain performance on Vista vs XP ?

I am making a multiple page document and need some pages to be landscape and others to be portrait. How can I do this?

I am making a multiple page document and need some pages to be landscape and others to be portrait. How can I do this?

In pages you can only have one orientation of the Page. You have to rotate the content on the pages that you want horizontal. Save the document in Pages format so you'll have a original version to work on. Then Export to or Print to PDF and open the document in Preview. Here you can rotate the pages to horizontal viewing.

Hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

hi, i was wounding if anyone would help me get information on the company regarding the acquisition of, beats by dre, could someone please help me out as i am doing a college report on this and need some good sources of information

Try a search with Google.
Why should we do your homework for you?

How do you access your .mac email from a PC? We migrated to icloud and need some guidance. Thanks.

We migrated our .mac email to icloud and need some help in accessing our email from a PC. Many thanks!

iCloud account not necessarily needs to be an Apple ID. Make sure, if you have both, to you enter the correct one.

I'm new here and need some help or should I say guidance.

Hey Forum peeps,
I have a treo 700wx working on Sprints network and running on windows mobile version5. I am a BIG game freak and am looking to download a playable version of Maniac Mansion (any version) and I dont know how to go about doing this. I have read it is a playable game but I am NO techie and need to be walked through step by step so hopefully someone out there will remember what it was like to first start out and give me a helping hand.
Post relates to: Treo 700wx (Sprint)

Hi.. Welcome to the Palm forums. This process is used to install any 3rd party program onto your 700wx. First connect the usb cable and sync. Now on your computer go on the web and find you program/game you are looking for that is in a windows mobile 5 format, compatable with wm5 and download it to your computer. It will be a compressed file in a .zip format most likely. Go to where you saved the file and right click on it and select extract here. Once extracted you should have a setup file which you run to install the program. Follow that process and it will realize it is a windows mobile file and install it accross the cable to the 700wx. When it is finished on the computer it will tell you to check the 700wx for further instructions. At that point check the screen on the device and follow the directions. The key is to download a file that is windows mobile compatable, if you download a palm os format file or other mobile operating system file it will not install. Hope that helps.
Post relates to: Centro (Sprint)

My Zen Micro story: Busted Headphone Jack, Need Adv

First of all, I'd like to apologize beforehand for posting a topic on the headphone jack problem. I've been visiting these forums for almost two months and by now you're all probably tired of hearing about the Zen Micro's headphone jack, yada yada yada. But with that over, here's the story of my Zen Micro experience.
I got it about two months ago from Fry's Electronics. Silver 5 GB, not bad. I was really happy using it until I stumbled upon this discussion board and realized the extent of this headphone jack problem. So being the dumb "who-needs-tech-support" kinda guy I am, I opened up my Zen on the third day of having it, breaking the warranty seal in the process (big mistake). I 'fixed' the headphone jack problem by sticking a little piece of folded up paper in the metal plate holding down the jack, hoping that by doing it early the problem would never come up.
Well, two months go by and by now I've opened it again a few times just for fun, and to 'check' on the headphone jack to see if my fix did any good. Well, three days ago, I decided to open it up again and document the steps with pictures. Everything went fine, though I lost one of the two top screws in the top that you must unscrew before opening the player. Oh well, no biggie, I thought, I could always get some more at the Home Depot or something.
So that night I plug in my headphones to listen to music, and to my utter horror, the sound only comes out of one side of the headphones. I'm not sure if this is because of ) the missing screw, 2) something I did wrong while taking it apart, or 3) just the problem finally randomly surfacing like in most cases. This is when I tell myself, "Crap, you really did it now. There goes $200." I frantically open it up again and stick another piece of paper between the plate and the jack and screw that plate in really, really, tightly. I am a little relieved to find that the sound is back in both sides, though if I push hard on the headphone connector a certain way the sound will disappear in the right side.
After thinking about it, I decided that the only way to go was to get a replacement. I had read a tutorial on how to fix the headphone jack problem using epoxy and paper, only to have the maker of that tutorial report that the headphone jack problem had happened anyway (a month later). He also mentioned that even with a busted warranty, he had managed to get a replacement Zen Micro free of charge. This gave me hope.
At any rate, I fired off an RMA request on Creative's site just to see what they would say. I admitted that the warranty seal was busted. They emailed back an obviously pre-written response that gave me vague instructions on how to ship my Zen for a replacement. My questions are the following:
) What are the implications of my broken warranty? Is there any way I can receive a replacement without buying a whole new one? I really like my Zen Micro, as I'm sure many of you do too.
2) Have any of you guys had a similar experience with RMAing? How does the whole thing work?
3) The only person I have ever heard of with a Zen Micro lasting more than 6 months without the headphone jack problem coming up is Jeremy, one of the moderators here. The jack problem IS a general design flaw, isn't it's What should I say if Creative blames the headphone jack problem on 'abuse' or something like that? Should I let them charge me for fixing it, etc.
Thank you all, so much. I know that was a lot to read, but I have been so happy with my Zen Micro up until this point that I really want this to end well. You guys have been a great help to me these last two months already. I appreciate it a lot. -Willy CMessage Edited by beefqube on 0-22-2005 08:22 AM

Did you find out how much it would cost because of the void warranty?
If you do want to lie to them, you are on your own in this issue.
You can do what one guy suggested on buying a new micro and returning your old one. Which is wrong ethically and morally.
If you have experience in soldering or know someone that can do so might be helpful. There should be some threads about soldering it back to normal.
Well if this my situations I really don't know what to do. Since if I do send it to Creative and that my warranty is still in effet, I still have to pay $25 and my own shipping/handling charges. It would only be replaced and I don't believe they actually repair it. That $25 goes to labor cost, which is something I don't understand when they give you a replacement, where is the labor in that?
But if I did lose my warranty and Creative won't take it or would charge me more than $25+. Then I would solder them myself. I just need to find out where to begin. Maybe I should find broken headphone jack Micros on ebay and see if I could fix them.

Who here bought the Zen Micro between last month and now

When did you buy it's (From Begining of last month till now)</LI>
Did you have any problems? What were they?</LI>
See, I'm about to buy one, but some of those who bought it latetly have had major problems:smileysurprised:...has anyone else who bought it from last month till now had any problems?
Please reply, I really need help

ok if you buy a zen micro now, to you its new. but it may have been sitting in the shop for 6 months, thus isnt new, where as someone who bough theres 2 months ago might have bought it from brand new stock and so its only 2 months old.
creative have made little fixes to the players, slight hardware revisions and sending them with the latest firmware update, so you cant really tell how new you player is just by when you bought it. so to find out if the really new players still have the problems you cant just ask who bought theres recently and how many problems they still have.

Various problems with Zen Micro, but getting smaller and small

Last night I turned on my Zen Micro and heard Led Zeppelin's All of my Love for about 4 seconds before the micro froze and started buzzing, reminding me of my Nintendo when the cartridge was dirty. So I tried restarting it several times and it continued with the same. I left it for the night, since I was at someone else's house and had not installed the new firmware; I needed to be at my laptop to mess around with it. In the morning, I looked up some stuff and found out how to access the recovery mode, which I did. I did all of the options, the last one being to format the hard dri've. I had already erased the firmware, but I formatted the hard dri've after I plugged it into my USB port and saw that it had been corrupted anyways and it was completely empty. Then, seeing as everything was gone anyways, I took the opportunity to download the firmware updates and install them, or at least attempt to. I got a message saying the battery level was too low, and to charge it before installing the firmware. I took out the battery and it ran on main power while I installed the first firmware. Then, I put the battery back in and installed the second firmware (newest) and it gave me the same error message about the level being too low. I took out the battery again, but this time it just turned off. I didn't quite understand so I just went to sleep and left it charging. I woke up and was able to install the firmware. Then I went to Windows Media and synced my library to the Micro. Bad idea. I don't know if it's the same with any of you, but I don't exactly love all the songs in my music library. It took every audio file I have on my computer and put it on the Micro. So I figured I'd just open MediaSource and do the whole editing thing I did before it got busted. That doesn't work because of course the music under Creative Zen Micro is different from the music under PC Music Library which, until today, were identical. Now. All I want to know is how I can look at the music inside my Micro in the same way I would if it were in my PC Music Library, where I have a scroll bar on the side with all the artists and albums and a list of tracks next to it. I need this because instead of everything being free and looking the same way it would in my downloads folder, everything is now in folders by artist name and it will take me forever to figure out which songs I do and do not want. Still, at least I've got it working now.

Rick6954 wrote:
So I figured I'd just open MediaSource and do the whole editing thing I did before it got busted. That doesn't work because of course the music under Creative Zen Micro is different from the music under PC Music Library which, until today, were identical.
It shouldn't be, assuming you synced via WMP the contents of the PC Music Library. Ultimately the contents of the PC Music Library is irrelevant though as don't you want to edit the contents of the player? I'm guessing you're using the v2 firmware which makes this a little harder...
Now. All I want to know is how I can look at the music inside my Micro in the same way I would if it were in my PC Music Library, where I have a scroll bar on the side with all the artists and albums and a list of tracks next to it. I need this because instead of everything being free and looking the same way it would in my downloads folder, everything is now in folders by artist name and it will take me forever to figure out which songs I do and do not want. Still, at least I've got it working now.
You can't. That's the problem with the v2 firmware. You might want to go back to the . firmware. For the differences in the firmware versions look at the FAQ post.

Creative Zen Micro - connect thru car and ghetto blast

Can I connect my Zen Micro (5G) thru my car stereo?
Can I connect my Zen Micreo (5G) thru my ghetto blaster?
If I can, what cables etc would I need?
Thanks

ghettoblaster
Ghettoblaster, a term that can be considered insulting or complimentary depending on the context, is a portable [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Stereo&gwp=8&curtab=2222_&sbid=lc02a" target=_top>stereo[/url] system capable of playing [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Radio+station&gwp=8&curtab=2222_&sbid=lc02a " target=_top>radio stations[/url] or recorded [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Music&gwp=8&curtab=2222_&sbid=lc02a" target=_top>music[/url] at relati'vely high volume. Synonyms include boombox.
The word ghettoblaster originated in the [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=United+States&gwp=8&curtab=2222_&sbid=lc02a " target=_top>U.S.[/url], apparently reflecting the belief that such systems are popular in [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Ghetto&gwp=8&curtab=2222_&sbid=lc02a" target=_top>poor inner-city neighborhoods[/url], especially those populated by [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=African+American&gwp=8&curtab=2222_&sbid=lc 02a" target=_top>black Americans[/url].
The term carries a connotation of power and disregard of social rules, shown in the ability to blast music to overwhelm those around you, as portrayed in the film [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Do+the+Right+Thing&gwp=8&curtab=2222_&sbid= lc02a" target=_top>Do the Right Thing[/url] by [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Director+%28film%29&gwp=8&curtab=2222_&sbid =lc02a" target=_top>director[/url] [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Spike+Lee&gwp=8&curtab=2222_&sbid=lc02a" target=_top>Spike Lee[/url]. Dispute over a ghettoblaster was a central role in that movie's culminating riot.
The word is racially inflammatory in some circumstances but has also been embraced as a term of black, urban pride?and, like many such terms, has been adopted by parts of the non-black American community. It is used as the name of at least one [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Magazine&gwp=8&curtab=2222_&sbid=lc02a" target=_top>magazine[/url] and one [url="http://www.answers.com/main/ntquery;jsessionid=6pibvpi5v022?method=4&dsid=2222 &dekey=Record+label&gwp=8&curtab=2222_&sbid=lc0 2a" target=_top>recording company[/url].

I am lost and need some guidance

Please bear with me for being so explicit on my posting, but I don't have a simpler way. But need some ideas to create a simple, safe workflow that includes back up.
I only use my Int HD (350GB), to install and run Apps; otherwise, I use Ext HDs. I have approximate 150GB of images, and another 50 GB of misc. files.
I have the following Ext HD:
1- 2 TB FW/USB -got a great deal brand new
2- 1 TB FW/USB already in use. I have 1 Partition (250 GB) while I was using Tiger
I used it to create a Boot up Dr, backing up Apps. But no longer use it.
I have been having some difficulty with this drive; sometimes it doesn't get recognized or stays on. I will be replacing the electric power cord, and all cables.
I am not sure if I should invest the time to re-format the entire drive and eliminate the Partition or just leave untouched.
3- 500 GB USB - secondary copy (non-RAI)
4- 350 GB USB - third copy (off site)
I am trying to decide how to use these drives, and hopefully, without the need to re-formatting them, but who knows. In addition, I would like to take advantage of TM for my back up.
5 Which DR should I set up as my destination DR for TM?
If I use the 2 TB is it better to set as RAID 0,better performance but if one drive fails, I'd be SOL, right?
On the other hand RAID 1, the redundancy factor would increase overhead. Any suggestion.
I also use Lightroom and would like to know how I should set it up to back up LR (non-image).
And lastly, about TM can I be select a specific source files for back ups? And can I back up different source Drives?
Is there a way that I could prevent TM not to back up Cache, because it will increase the overhead
Again, any suggestion would be appreciated

crossover wrote:
I called Applecare yesterday and told me that TM only works with the Internal HD, no other DR, not sure about that. I usually get better answers here than wasting my time calling them, go figure.
That's just plain wrong. Some of them don't seem to know much about Time Machine except the basics (and, to be fair, most Mac users don't have data on external drives, so it likely doesn't come up much). But yes, TM will back-up any internal or directly-attached external USB or F/W drive/partition, as long as it's formatted Mac OS Extended. In fact, in most cases it will do that by default -- if you don't want something backed-up, you have to specifically exclude it.
I have never tried TM and not sure if that would be a good workflow or just use other Apps like the one you mentioned
There are advantages and disadvantages to TM, as with any other app. One of the main advantages of TM is the very fast, hourly, incremental backups of additions and changes. This gives you an excellent chance of recovering a previous version of something that was changed or deleted in error (such as "Save" instead of "Save as"), or somehow corrupted.
And there really isn't any workflow, once it's set up (which is also quite easy). TM just does it's thing.
First it does a full backup of everything on your system (less some caches, system workfiles, logs, trash, etc.). That, of course, is a lengthy process.
Thereafter, it will do an incremental backup hourly, as long as your Mac is awake and the external drive is attached.
It automatically "thins" your backups, including when the TM drive/partition gets near full, deleting the oldest backups to make room for new ones.

Zen Micro: I'm new and need some h

Similar Messages

Maybe you are looking for