Zen Micro Installation Prob

I just bought my green micro today and I tried to install it, but it didn't work. Everything went well until the actual installation part where I got numerous popups saying that _____ could not be registered. The only option I had was to press okay. After I just kept pressing okay (there were tons of these pops), the installation reached 00%. When I connected my micro, my computer did not recognize it and I could not open any of the programs installed. Please help! I have all the system requirements but it still doesn't work.
Thanks for your time!Message Edited by maddmagg on 0-22-2005 0:43 PM

Any help would be appreciated

Similar Messages

FIX: Zen Micro Installer Error - "DemoShield Player has encountered an error.

I just thought I'd post a solution to a problem I was having with the Zen Micro Explorer software installation because it might help someone else. Also, this forum is well indexed by search engines so it will be easy for people to find. It took me well over an hour to track this down.
After starting the Zen Micro Explorer Installer CD, a full screen splash is shown of the creative logo and then DemoShield is started for the software install. It shows an intro screen where you must click 'Next,' on clicking next the DemoShield program was crashing with the generic Windows error "DemoShield encountered an error..." The problem appears to be a software conflict between DemoShield and Apple's QuickTime (any version as far as I know). Disabling the QuickTime startup entry does not help, installing in Safe Mode does not help and exiting any instance of QT in the system tray does not help either.
To fix the problem you must un-install the QuickTime software from your computer by going through the Add/Remove Programs screen in the Control Panel. Once un-installed, run the Creative installer CD again, this time it will run correctly. Follow the on-screen prompts to complete the install.
<i>Please note that if you have installed iTunes on your system it will not run while QuickTime is uninstalled, this is normal. Re-installation of QuickTime is covered later in this post.</i>
When you have completed the install and restarted your computer you can re-install QuickTime. At the time of writing (4th Sept 2005) QuickTime and iTunes are bundled in one download package so you must download both. You can <a href='http://www.apple.com/QuickTime/download/' target=_blank>get the bundle here[/url]. Let it download and run the installer. If you already have iTunes installed, the installer will 'Repair' your installation, detecting that QT is missing it will re-install. If you do not have iTunes the installer will installer iTunes and QuickTime.
When you have completed the QuickTime+iTunes install you have got around the DemoShield issue. I hope this of use to anybody with a similar problem.Message Edited by PhilM on 09-5-2005 02:30 AM

Hi Jeremy,
I knew it was an issue with QuickTime because I clicked on 'Send Error Report' on the error message and it took me to <a href='http://oca.microsoft.com/en/response.aspx?SGD=0b73e24-7433-4ee-ac4c-49956d08c85c&SID=623' target=_blank>this page[/url]. It states "An analyst at Microsoft has investigated this problem and determined that an unknown error occurred in QuickTime Player. This software was created by Apple Computer, Inc.."
My QuickTime version is 7.0.2. My operating system is WIndows XP Home (Athlon 64; 52Mb RAM)
Eventually I just tried uninstalling QuickTime and it wroked after I did that. Some screenshots: <a href='http://www.phantomphil.co.uk/ZM/' target=_blank>Click[/url]
The contents of my disk.id file reads:
Creative Zen Micro
ZENM-CDSD-W-LB
Hope this hel
ps.
Message Edited by PhilM on 09-5-2005 02:45 AMMessage Edited by PhilM on 09-5-2005 02:48 AMMessage Edited by PhilM on 09-5-2005 02:49 AM

Zen Micro Installation help...please

I just got a 5 gig Zen Micro. All was well until I attempted to install the program in the computer, which led to "Error code -600", which told me to clear my temp folder and check my internet connections. I have a cable connection, windows XP, and Norton antivirus. Does this have anything to do with my problem? If not, what am I doing wrong?
please, someone, help. I'm about to ritually disassemble my micro.
thanks and happy holidays
-CmF

ok i found the problem.
after a few hours of googling i found that the error is caused by an outdated version of windows installer.
to fix this problem on your computer find the folder
C:\Program Files\Common Files\InstallShield
and rename it to
C:\Program Files\Common Files\InstallShield-old
and then run your install again that should fix your problem

Zen Micro - Installation CD error mess

Hello there...
I just bought the Zen Micro today, and as I was attempting to load the installation CD, I received the following error message:
"Exception occurred: Stream write error"
Does anyone have a fix for this problem? Thanks very much!
ZB

Try download the separate elements of the installation from Creative's site, click the link Support > Downloads on this page.

Zen Micro Installation P

Hi,
I have a Zen Micro and am currently away and would like to play my zen through my friends laptop. However, my installation cd is at home and I can't find it on the download page (unless i don't know what i'm doing !).
Can someone post a link to the installation or point me in the right direction ?\
cheers pezza

Hi Pezza,
You didn't mention which firmware you have on the player, check that first.
If it's version .x - get these files from our Downloads page, and install them in the same order as listed:
Creative Zen and Jukebox Driver Upgrade version .30.03 - JB3MV2_PCWDRV_US__30_03.EXE
Creative MediaSource Player/Organizer 3.30.2 - CMS_PCAPP_LB_3_30_2.exe
Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource - CMS_PJB3_PCApp_LB_2_00_20.exe
If the firmware is version 2.x, then you can get the second file from that list (MediaSource), and get this plugin:
Creative MediaSource Plugin for PlaysForSure devices (version .00.8) - CMS_PCMTP_LB__00_8.exe
And Windows Media Player 0 from Microsoft's site.
You can get all the blue updates from our Downloads page, just select the Zen Micro in the list and it will show you all the files that are available.
Cat

Zen Micro installation problem - file "data2.cab" neede

Hey
Trying to install my Zen micro software when it says, " Please insert dist that contains the file data2.cab"
I have the installation CD so why is file not on it'sDan

It might be a problem with the CD, but it sounds an odd error to get.
You can of course download the latest drivers and software from the download page for your player, so this is probably the best workaround as well as getting the latest software.

Zen Micro installation CD ISO h

Installation CD for Windows XP and older OS for Zen Micro.
Part
http://www.megaupload.com/?d=422F8CH3
Part2
http://www.megaupload.com/?d=40534I2B
Download all part and part 2 to the same folder, unrar, burn the ISO of the installation CD and then run installation from this new CD.
Note: Link error corrected now.
Message Edited by BadBoy on <SPAN class=date_text>08--2005 <SPAN class=time_text>0:04 AM
Message Edited by BadBoy on 08-2-2005 09:3 PM

johnston2 wrote:
Or just go to http://www.station-drivers.com/page/sb%20audigy2.htm and get 3.20.72 & 3.20.78
I successfully loaded 3.20.72 overtop of MediaSource 2, then loaded 3.20.78. I noticed that they have 3.30.04 listed, but when I loaded it my system didn't appear to update.
I remember their sound card mediasource will only install if you have a creative sound card in your computer. I don't think it will install for people who don't have their sound card.

*sigh* zen micro installation probl

from searches, i see that this is common. haven't found a good solution to it yet, though.
i just bought a zen micro 6GB for my girlfriend. (awww). i have XP, and installed everything on the disc except acrobat and the aol shortcut.
creative mediasource installs fine .... the zen micro explorer installs fine .... but when i plug the player to the computer, it ) doesn't charge and 2) isn't recognized.
there is a yellow question mark on its usb port when i search for it.
what am i doing wrong?

Your chances of getting it to work when XP has a service pack is greatly increased. There are some who have got their player working on XP without a service pack, but on many systems a service pack is necessary. As far as I can tell it doesn't matter if you have SP or SP2 installed, there is no difference in success rates.

Zen Micro USB Prob

Hi
When I'm plugging my Zen Micro to USB port, my windows XP says that "the device is not recognized" and Zen hangs after that...So in order to reboot it, I need to remove a battery for a while.
so I cant synchronize it with PC at all...
I've installed all the software from the "Installation CD"
firmware version : 2.2.02

To Get Your Computer To Recognize Your Zen MicroPhoto you need to just reinstall your current version of windows media player because it has all of the drivers for mp3 players. This worked for me and should work for everyone else. Your Welcome once this works
This won't delete your current library of songs

Zen micro FM prob

my 5gb zen micro doesn't have the option for changing from mono to stereo. but more than that, it doesn't have an option to choose between international or japan frequency...so my player doesn't pick up any frequency at all.
is this true for others?
is it caused by the current firmware upgrade?

thanks everyone...
it was my player that was defecti've.anyway, i was able to have the unit changed now i can listen to both radio and mp3s.
thanks a bunch!

Creative Zen Micro Firmware Prob

So I've got a Zen Micro bout a year or two back and it stopped working a whle back.
It turns on fine but used to make a buzzing sound and?freeze. It had a small box with?'Firmware Problem' written on the screen.
Lately, it still makes the?buzzing sound but freezes on the Creative Logo screen.
I've tried to renew the Firmware and I tried the recovery tool thing, but neither worked.
Is there any way to fix it's Or is it totaly gone?
Thanks in advance.

Did the firmware problem happen during a firmware update, or did it just happen all of a sudden, and if so how?
to re-load the firmware, download the latest firmware on a Windows XP machine, go to control panel, tne add/remove programs, look for windows media player and if its there click on remove, you should see a window saying something along the lines of windows media player rollback.
Next lok for something called ( or somethg like)windows media player runtime, and remove that ( it may show the roll back screen again, continue, and complete the process)
re-start windows
Plug in your Creative MP3 player via USB connect it to a chharger ( if it uses/can use an external charger) and let it go to 'rescue mode'
Click on the firmware update, and when it asks you what language, highlight re-load OS ( or firmware) in recovery mode on your player.
As soon as the screen on your player prompts you to re-load firmware, click on your language choice on the P.C upgrade window.
If there is no language option, then get ready to select re-load OS on your player when the update starts on your P.C.
This only works with XP
If the above doesnt work:
Did the firmware error occur as a result of an attemtp to upgrade the formware to a plays for sure version?
Is the player regognised by your P.C running windows XP? ( go to control panel then hardware, then device manager?
This is what happened when i tried to upgrade ther firmware on my Zen xtra, what i did to fix it was based on what other people had tried on various other creative playerws such as the touch/micro/vision etc
see hereMessage Edited by Rich_T on 06-2-20070:23 AM

Zen Micro - Dock Prob

Ok, so I connect up my micro to the computer. All is well,it is recognised on device manager. I then go on Zen Micro Media Explorer and on the player, it keeps changing from the docked mode screen to normal playing mode... On the Media Explorer all the buttons are disabled and it says 'device is not connected'. I try go on Creative Media Source Organiser or Creative Media Source Player, and the Micro is listed on the left, but when I click on it an error message pops up saying "creative mediasource player has encoutered a problem and needs to close. We are sorry for the incnvinience."It doesn't show any specific error code or anything, but I have tried reinstalling the softwares, but no luck. The software itself is very unstable on my computer for some reason which I am unsure of, my computer can handle much more power demanding software such as Photoshop and other media programs, but MediaSource Player seems to run really slow, etc.Any suggestions anyone?rich

Error message is
AppName: ctcms.exe AppVer: 3.0.37.0 ModName: ctnjb3.dco
ModVer: 2.0.3.0 Offset: 0007440

ZEN MICRO PLAYBACK PROB

I have some mp3 files of uni'versity lectures. They were recorded/ encoded? at
6 kb
ps.
When I try to play them on the Zen Micro they play too slow, like an LP playing at the wrong speed.
They sound fine on WMP0 or Real Player. I have also played these files on 3 other mp3 players and they sound fine on them. Any ideas?

You'll need to reencode them at a supported rate. I have a suspicion it's the bit-rate being too low, but also check the sampling frequency.

Zen Micro Remote Prob

I have now owned two remotes, one which I returned and another I just bought off eBay, and neither have worked on my Zen Micro. I can hear sound through earphones when I plug them into the headphone jack but pressing he buttons on the remote does nothing. I can't skip tracks or pause the music. The remote is not on hold, is there anything else i could try?

Well, Ebay could mean a few things. Was it a store on Ebay or a private seller? You might need to contact the seller to see if they can provide you with a (proper) receipt, that shows what you purchased and when you purchased it. If you bought it in November then you should still be within the 90 day (full) warranty. You do normally need a receipt to prove the original purchase and date.
Contact Customer Support anyway to see what they advise, and it wouldn't hurt to e-mail the seller to see if he/she can give you a receipt.
Cat

Zen Micro Update Prob

I have emailed Creative about 3 times aboute this problem. All they keep doing is sending back some stupid automated reply telling me how to set up my programs. I already know that.
I installed the last update of the Zen Micro. The one where it will now let you plug it into another computer and transfer things to it without installing all the drivers. It said it was going to lose all songs. I did what it told me to do and it lost all the songs. I did't really mind. It finished so I restarted the computer and i plugged it in. I went onto Zen Micro explorer. It did't know
it was connected. It was fine before the update. I uninstalled everything and put it alll back on again. Restarted my computer and it still could't find it.
Please can you help
me asap. Thank you.

ollyp wrote:the whole point of the v2 firmware is that it works with windows media player, and windows explorer someone told me. they have updated media explorer to accept it but its not designed to.
It depends if you prefer working with the folder view or not, and whether there are other reasons to switch to v2.

Zen Micro Installation Prob

Similar Messages

Maybe you are looking for