Zen Micro Keeps Playing even when off

i was playing a song and i turn my micro off without hitting pause, and when i turned it on it was playing 5 tracks later!!

click the keyframe that contains your audio (to select the audio)>in the properties panel change the sync property to 'stream'.  retest.

Similar Messages

  • My Zen Micro keeps freezing up when i shut it d

    as stated in my subject, my Zen micro keeps freezing when i try to shut it off (it stays at the "shutting down player" screen). then, no buttons work and the only thing for me to do is take the battery out and put it back in. Is this happening to anyone else? I sent it back to them last time for this and they said they "fixed" it, but they mailed it back to me with the same problem not repaired. kind of annoying. Does anyone know anything more about this or if i'm doing something wrong when i'm shutting it off (not that I imagine anyone could possibly screw that up, but who knows). Thanks a lot.

    What else have you tried? For example, have you worked through the options in Rescue Mode?

  • Audio keeps playing even when it doesn't show on timeline

    Right, so this is my situation. I have a piece of music (3 minutes long) and I want to use a portion of that in an animation.
    I made a separate layer for music only and added a keyframe. I dragged the music from the library on to the stage. The music worked and started playing. But I don't want to use all of it, so I made another keyframe to contain the music. The little red audio wave thing showed that it was only in between those two keyframes, but the music kept playing even after the second keyframe, despite that the audio wave ended beforehand. Even if I remove the frames after the second keyframe it still plays.
    This is what it looks like. See how before the keyframe in the middle there's a red thing indicating sound, but after it's gone. Yeah, the audio still plays after that.
    And ideas? Thanks

    click the keyframe that contains your audio (to select the audio)>in the properties panel change the sync property to 'stream'.  retest.

  • Audio keeps playing even when move away from slide

    I am using Captivate 5 and have incorporated TTS voiceovers. I have an introduction slide where a voice gives the scenario, with back and next buttons. The Next button goes on to a demonstration (part of the same project) with a different voice narrating. The demo screens have a button to exit the demo at any time also. If a user is playing the scenario and selects the Back button, the second voice from the demo continues anyway, even though the demo hasn't displayed. By the same token, if you start working through the demo and exit from it using the button provided, the voice continues as if you play the rest of the demo, even if you have moved onto different slides. If you start a second demo, both voices play at the same time. I tried using the check box to turn off audio when button clicked, but that actually turns off the audio on the computer and either no audio is heard at all then, or it just turns off for that slide, then the next slide's audio plays, regardless of what screen is displayed. How do I make the audio stop if I exit the slide or slide sequence (project)?

    Thanks Ashwin
    I hope I have done this correctly, I have shared part of the Captivate project at https://acrobat.com/#d=wxfp*GeqGu-77HjzL1DHww
    If you navigate to slide 3 of 27. Answer the question. Then, as you read the success or failure caption, you will also hear audio associated with those captions. Now, navigate to the next page before the audio has completed playing and you will also hear the audio of slide 4 overlapping.
    The audio from the success /failure captions do not stop playing when moving to the next slide. I hope there is a way around this, as I really want to have audio with the success/failure captions as well as the page audio.
    thanks
    Loraine

  • Itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing it

    itunes launches itself and starts playing even when my laptop is closed, but I can still hear it. I can't figure out how to keep it from doing that.

    See if a device is attached and "open iTunes when iPod is connected" is selected. https://discussions.apple.com/message/16483979#16483979
    Check for other iTunes preference settings that might cause this.
    Hacks to stop Bluetooth speaker from starting iTunes -
    http://forums.macrumors.com/showpost.php?p=19045335&postcount=4
    LincDavis June 2014 post - https://discussions.apple.com/message/25998941

  • The flashlight in my iphone 4s keeps lighting even when it is switched off. I went through many articles and in those was mentioned presence of humidity could be one reason, but my phone was not prone to such conditions

    The flashlight in my iphone 4s keeps lighting even when it is switched off. I went through many articles and in those was mentioned presence of humidity could be one reason, but my phone was not prone to such conditions & it is the condition when i took it from its pouch. Kindly help

    If the phone is offline there is no way to track it or send a message to it.  You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does.  If it does, you will get an email informing you.
    You might want to read this: http://support.apple.com/kb/HT5668.

  • Do my itunes purchases keep downloading even when I'm not signed into itunes?

    I don't have enough time for my purchases to download completely, and I need to sign out of my itunes account, and I was just wondering, if I sign out without pausing my downloads, will they keep downloading? Because this is what I'm actually hoping for. It would be great if they could keep downloading even when I'm not signed in. I just don't know if they do or not.
    Caleb

    Hi junebeez,
    Have you gone into Settings and turned off the Sync Courses and Notes option? If not, try doing this:
    Go to Settings>iTunes U>Sync Courses and Notes, and see if it is = On. If it is, turn it Off and see if that fixes the problem.
    Hope this helps!
    Cheers,
    GB

  • Computer always showing in Shared pane even when Off???

    My Macbook finder is always showing my other Home computer in the Shared pane even if the Home computer is Off???? However, my home computer is showing my Macbook only when the Macbook is ON .
    Both running 10.5.1 (all current updates).
    Any idea how to fix that?
    Thanks

    My iMac does the same thing. It show my Macbook in the Finder when its off. If I do a reboot it will not show and the iMac but soon as I turn it on it appears as normal just as it should same goes for the macbook. Now if I take my iMac of the network it will disappear on my macbook. The iMac wants to keeps show my macbook even when off. Any suggestions?

  • Zen Micro Keeps Getting Random Free

    Just bought myself a Zen Micro 5gb yesterday. Updated the firmwire to the latest version--version .02.05.
    The problem is that the Zen Micro keeps on freezing randomly during the playback of music. When it freezes, the only way to reboot is through taking out the battery and having it rebuild the library again. I'm quite happy with the purchase but this presistent problem sounds like it's going to lead to bigger ones.

    It could be your musics that you uploaded into the player. How did you do transfer your music?... If you use MediaSource.. I would recommend upgrade that software also; from www.nomadworld.com
    Try reload your music after you have the latest version of the Mediasource.
    Have fun,
    K

  • My phone can not find a carrier and just keeps searching even when i pull out the sim card

    my phone can not find a carrier and just keeps searching even when i pull out the sim card. help

    try restoring the device with iTunes (after backing up)

  • Getting My Creative Zen Micro to play on my P.

    Hello,
    I have a few questions about getting my Zen Micro to play in the 'Creative Source Organizer' that I installed with the software CD that came with it.
    It playes fine in the 'Media Explorer', in which I use to upload and delete songs from my player, but it won't play at all in the 'Organizer'. The files show up, and the songs show they are playing, but no music comes from the speakers. I would rather use the organizer to play songs from my Zen Micro, and not the 'Media Explorer'. Is there anything I can do to get this to work? Every other file I try, be it a CD or MP3 from my hard dri've, works fine.
    I am using Windows 98 as my operating system. I do hope this is not the reason why, but it is my guess that it is.
    Thanks in advance to those who can help.

    See here in the Zen FAQ at Nomadness.net.

  • Suggestion: ZEN Micro Photo: Album art when playing tra

    I was kinda hoping that you could display album art whilst playing tracks on the ZEN Photo. If you can, I can't figure it out, nor is it mentioned in the brief manual.
    Please consider this as a suggestion to include the feature in the next firmware update. I also think it would be cool to be able to display a slide show durring audio playback. You could create presentations for the road or simply display slides in MTV fashion that go along with the tunes.
    What do ya think?

    * I've seen some comments on the screen being dim (or not as bright as expected). Can anybody confirm or debunk?
    I set the screen contrast to 80 percent. In normal office lighting, pictures appear crisp and bright enough. In total darkness, looking at the screen won't hurt my eyes either. OLED rocks!
    * I've read reports about no music while viewing pictures. True or False?
    Unfortunately this is true.
    * Anybody using SUBSCRIPTION music on their Micro Photo If you are, can you see album art while a track is playing (like the Apple nano)?
    Unfortunately again, album art is not displayed.
    Overall I'm very happy with Zen Micro Photo. The only complain is that the radio is mediocre at best.

  • My zen micro keeps freez

    Hi... I hope you can help me. I am fairly new user and I have had a great experience so far with my zen micro.
    My first issue was running Creative MediaSource. These boxes were popping up saying something about associations. I was going to write them down today, but now they are not showing up once I tried to plug in my player with my USB connection. I did find that I had to click yes on the 4-5 boxes to continue on or MediaSource would not run.
    Then one time while using my player last week, the screen froze up and the music stopped. The screen that says 'Creative' at start up appeared and it would not turn on or off. When I plugged it in, the screen was lit up showing that it was fuctioning. I took the battery out and put it back in, the player worked again for awhile. Now for a day or so, it worked fine until I plugged it into my computer and it would not recognize the player. I unplugged it and the screen is frozen on the music playing screen.
    I don't know what to do from here. I have XP on my computer, but I don't know what firmware I have. It is not the newest one from July. I tried to read up on the current issues of the firmware and don't want to create more problems if this firmware is faulty. Also I don't know how to download it and use it with my player if it is on a frozen screen and unrecognized by my USB connection.
    Please can you offer some advice that will helpme understand what is going on.
    Thanks,
    Steph

    Can you get into Rescue Mode and run a Disk Cleanup? See the FAQ Part post.

  • How do I get iTunes to keep playing (radio) when I am not using the compute

    How do I get iTunes to keep playing - radio or CD - when the computer is otherwise idle? It cuts off after about 5 minutes and goes into sleep mode. thanks,
    Vlasta

    Hey vlasta4444,
    It sounds like you'll want to change the time it takes for the computer to goto sleep from System Preferences> Energy Saver.
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/10330.html
    Jason

  • Media Center Keeps playing audio when connected to HDMI

    I have LCD TV connected to may laptop.
    The media center keeps playing audio sound when the HDMI sound output is enable.
    Laptop: CQ35-214TX
    OS: Windows 7

    This is one of the BIGGEST reasons why I would want to take my PC and chuck it into the nearest heavily traveled lane of traffic and watch it get completely destroyed by any vehicle that runs over it then go buy a MAC. The idiocy involved in doing such a simple task is revolting.
    FIrstly, and in no way am I directing my ire at you specifically, I have already performed almost everything you have listed for me to try... PREVIOUS to me posting this cry for help.
    Secondly, I included a screen shot of the sound devices in my first post and indicated that my display driver/device is  Intel(R) HD Graphics 4000. Beyond that, I don't know what you are looking for.
    Thirdly, and most frustrating, the document you told me to "follow every single word of instruction" (which I have previously done) doesn't even tell me to connect the laptop to the TV. It talks about the different kinds of connections but never actually TELLS me to connect the laptop to the TV and WHEN to do it.
    When I connected my laptop to my TV for the first time it never tried to load ANY drivers. HOWEVER, it does show "PANASONIC TV" (the brand of my TV) and the monitor type in the resolution dialog. But it also show no other type of monitor.
    The biggest issue I can see is that there is NO DRIVER LISTED FOR THE HDTV AUDIO in the sound devices. Therefore how could it transmit audio via the HDMI cable since it doesn't seem to even recognize it?
    I am at my wits end. And I have NO INTENTION OF PAYING SOMEONE TO MAKE THIS WORK!!!! There is NO reason why it should not work upon conection of the HDMI cable.
    What the hell is wrong with HP (or any other PC manufacturer - and Microsoft, as well) when the simple task of connecting a laptop to a TV is so complex and convoluted. And, by the way, I am an electrical engineer with multiple degrees... And this doesn't make sense to me!!! For pity's sake, can someone please give me a simple solution to what should be a simple issue??!!
    Alex...

Maybe you are looking for

  • Download ALV report to PDF with Lights

    Hi, I have a requirement wherein, when i download ALV report to PDF which has Lights in the first column.  My problem is these lights are not displayed instead i get the following in the PDF PDF o/p: XOO RED SIGNAL OXO YELLOW SIGNAL OOX GREEN SIGNAL

  • Unable to add text in DIVs (Was: divs)

    I have inserted three divs. In the first one I was able to add text to but I am not able to do so for the second nor third, why is this?

  • Function for getting status of a document(vbeln)

    Hello, i am creating a report showing the list of sales order. I also want to show the status of each document(vbeln). Is there any SAP function which returns the stauts of a document(vbeln). Thanks for yur time. Shehryar

  • Delivery shedule tab

    Hi, What is sinificance  of delivery shedule tab in purchase order. How maintain delivery shedule in that tab.   Can I maintain more than one purchase requistion in delivery shedule tab for Particular po line item.   If I mantain differnt purchase re

  • Display rows as page wise

    Hello, I have a requirement to display the limited records from the query which returns large number of records. Assume that select * from orders order by order_id is giving me 1000 rows. now i have to do a filter, display records from 25 to 50 or 50