Zen Micro making weird pong sounds and loads longer than normally

Hi 2 you.
I bought my Zen 2 weeks ago, and since week he starts to make weird sounds... it sounds like a beep and like a ringtone, it starts of beeping with long intervals and then descends to small intervals.. it's very freaky lol, almost sounds like the sound you hear in old cinemas
It started to happen week ago, I dropped it from height like 70cm while it's on.
And now it makes this beep sounds twice on shutdown and when i connect it to my pc, the zen crashes sometimes with these weird beepbeep and I have to take out the "batteries" ... :/Message Edited by RolfK on 07-05-2005 05:45 AM

I finally got my OS X working again by doing a hardware check ("D" on startup), and then I ran a startup with log (CMD+V) and then it suddenly worked. It now also works without having to run the boot up without log.
But the reading of the OS X disc is still there. This is the error message I get when the Mac tries to read the disc: sam multimedia: READ or WRITE failed, SENSE_KEY = 0x03, ASC = 0x02, ASCQ = 0x00
But I think I'm gonna swap out my current HDD, just in case

Similar Messages

IPod is making weird clicking sounds and not responding...

I dropped my IPod last night and it fell onto concrete. Of course.
Right after - It froze on a list menu and would not respond to anything, including being plugged in to the computer. Now the screen is just going from the apple logo to the unhappy IPod picture, and its still making these crunching clicking sounds. Any ideas would be helpful thanks.

i believe the hard drive has been jarred enough to no longer be functional. Unfortunately apple will not cover accidental damage even if its within warranty.
The ipod sad face means that the hard drive is irreparable, If your ipod is within warranty you can go ahead and try to speak to an ipod tech support for some assistance in getting a repair... If it isnt, i heard about a site called www.iresq.com
Theyre a third party repair service for ipods and apple equipment... however i dont know their credibility.
I hope this helps, im sorry for your loss.

Have a Zen Micro (6GB) - Lost Software CD and Firmware update confuses me. Please he

I bought my Zen Micro about 7 months ago and have been using it fine until recently formatted my computer and realized I've lost my software cd (the one that comes with the player).
I tried downloading the Creative MediaSource Organizer/Player (version 3.30.2) and updating the firmware (thereby loosing all the songs I had saved in there. Ugh.) in my Zen Player and in the beginning MediaSource still wouldn't pick up my Creative Player. Then, I don't know why, it now works...but it works like a normal External HardDri've or a PenDi've would! It not longer has that menu thing (where there's a list of artist and albums) at the left side but simply folders under the Creative Player.
Does anyone know where I can get the old firmware and download the required software? I greatly prefer the way my player worked before I updated the firmware/software and I would like to just have that back even if it doesn't have as much features or whatever came with the upgrade. (iTunes or something. Has no idea what that is.)
Also, does Creative have a Service Center in Malaysia (specifically Kuala Lumpur) and can anyone tell me where it is or give me the phone number to call? I'm still under my warranty but this site doesn't list a number to call although they say they give Telephone Support until the warranty expires.
Thanks in advance for any help!
Cherish
Edit: BTW, I have tried emailing Customer Support but so far, no reply, and that was...2 weeks ago, I think? And, like I said, the Customer Support section in this site doesn't list any numbers/Service Centers which is why I'm asking...Message Edited by cherish90 on 02-06-200705:25 PM
Edit the second: Does anyone know if the confirmation email that Creative is supposed to send to your account after you send them an email isn't working? Because I just double checked my inbox and I realized I never got any confirmation letter. And I'm very sure I didn't accidentally delete it.Message Edited by cherish90 on 02-06-200707:38 PM

LOL. I've sent in my player. FINALLY found the Service Center (for those in KL who want to know, it's in Berjaya Amoda, behind Low Yat and opposite Times Square) after asking the shop I bought the player from.
And the guy who I talked to called their HQ or whatever and said that neither of the messages I sent (I sent 2; one shortly after I started this thread) were recorded/received on their end although I DID get the "Your message has been sent" page after clicking on the 'submit' button. And yeah, I used this email too. *confused* Maybe Creative doesn't work with Mozilla Firefox (the browser I'm using)? I think that's kind of lame, though, because FireFox is like practically as big as EI now and it's more user-friendly (the tabs are uber cool IMHO). Unless Creative has some sort of problem with Mozilla...
*cough*
ANYWAY...
Yeah, I did download the PlayForSure plugin (although I have no idea what it's for) and MediaSource STILL picked up my Micro as something like a pendri've.
Never mind, though. The guy I talked to - never got his name... - said that once you've upgraded the firmware to the latest (which is the one that needs all these weird plugins and makes the device an MTP [I THINK that's what it's called] device) you can't change the firmware back to the old one unless they send it in. So I'm sending it in. And I think they'll replace the software CD for me too, so that's all good.
Thanks anyway, Jason.
Cherish

My ipod classic has started making a mewing sound and all it does is scroll through the songs. It will not play except when connected to my computer. I tried resyncing and that did not work. How do I fix this problem?

My ipod classic has started making a mewling sound and all it does is scroll through the songs. It does not play on my Bose sound dock or through earbuds. It will play when connected to the computer...but that makes it hard to take it on a walk with me I thought it might be a synching problem so tried that--still doesn't work. How do I fix this problem with out restoring it to the factory setting? I do not want to lose all my music content as some of it I cannot replace easily. Please help with suggestions and advice. Thanks. Karen in GA

Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day!

Seagate FreeAgent Go is making a clicking sound and the light is rapidly blinking. My Macbook is no longer recognizing it. Is there any way to fix it or recover my files? The SeaAgent is less than a month old!

Seagate FreeAgent Go is making a clicking sound and the light is rapidly blinking. My Macbook is no longer recognizing it. Is there any way to pull all the songs I have saved on it? The SeaAgent is less than a month old!
Does anyone know how to fix this issue?
Or at least recover the lost data?
Thanks!

How to fix: the drive is in warranty, so contact Seagate for a replacement.
How to recover your data: Do you have backups? (If not, you really, really, should.)
You can try downloading Data Rescue, which will run in trial mode and let you know if the data is recoverable. (You can then choose to purchase the full version if it works for you.) A clicking drive, though, is usually (though not always) a sign that the drive cannot be recovered.
Matt
Edit: fixed link.

ZEN Micro won't turn Off and now won't turn

Hi Everyone, hope you can help me out here.
I have been using my ZEN micro for about week now and it was at first working fine.
Then it started not turning off, so i had to pull out the battery.
This is obviously very annoying, but it got worse over time.
It now won't turn on unless i switch it about 30-40 times.
What is going on, is there a way to fix it and is anyone experiencing the same problem?
Thanks very much,
Fern

FernIe, I have the exact same problem, although now my Zen Micro won't turn on at all via the switch.
My Zen Micro is 5 months old and its only been over the past few weeks I've been having problems. It started with having to hold the switch in the power on position for a least 30 secs and trying it at least 5-0 times before the player would turn on, and having to remove the battery to turn it off. Now, not matter how many times I try the switch or how long i hold it for, the player won't turn on.
The battery is fully charged and I have never had problems with the headphone jack, and I haven't dropped it or done any damage to it that I think could be causing it. I'm having to turn it on by plugging it into my computer through the USB cable and then unlpugging it once its on, it's a pain doing this and means if I want to use it later I have to keep it on, muted, in my bag all day with the lock turned on (that end of the switch works) then once its turned off I can't turn it on again until I get near a computer again.
I've searched the discussions and knowledge base but haven't found an answer. I've just emailed the support team and I'm waiting for their response, would be interested to know what they've told you.
Just letting you know your not alone and I feel your pain!
Jen

My ipod is making a funny sound and is bearing the red x symbol... help please?

My ipod is not working. It is making a beeping sound and has the red x symbol.. i don't know how to fix this and i would really like my ipod to work!

You may have success with these.
iPod won't turn on.
iPod battery doesn't charge.
Your Windows PC doesn't recognize the iPod is connected.
iPod shows only an Apple logo and doesn't start up.
When restoring the iPod, it's often useful to put it into disk mode first.
Putting iPod into disk mode.
If none of the above help, it may need service.

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign

Power on MacBook Pro takes me to login screen. All user icons appear as normal. Once I enter password for myself (administrator) spinning takes longer than normal and doesn't log in but displays a no sign (circle w line through it) when attempting to login from guest account it takes me to screen that says that the computer will restart to a safe safari system for the guest user. I waited for a longer time and the grey denim screen comes up. By the apple in left upper corner it said I think LSA? Then safari menu bar. The page it loads to us file:///System/Installation/CDIS/Mac%2005%20X%20Utilities.app/Contents/Resource s/English.iproj/GuestLoginInfirmation.html
Can someone HELP? I'm afraid I might do something wrong

What backups do you have?

Zen Micro starts with blue backlight and then fades to blank scr

My 2 year old Zen Micro which has had little use and few recharge cycles will neither charge, play music, or connect to my computer. I am hoping a battery replacement is all that is needed but hate to buy one if these symptoms don't sound like a bad battery. I have pulled the battery to "reset" it with no benefit. While plugged in I can hear the touch responsi've keys click but the screen is blank besides the charge logo and I get nothing when it is unplugged. It won't be recognized by my computer (Vista and new to the player) so I can't scan the hard dri've. Does this sound like a battery issue or are there other steps to try before replacing the battery. I contacted Creative and all they said was send it in and they will charge me no more than $35 for replacement if the repair is greater. If I had an iPod, they would look at it, swap a battery, and it'swould get solved in one minute at the in-store Genius desk. Thanks in advance.

kind of hard to understand your message but i think i get the general idea.....it should say that until its charged........

Zen Micro "Firmware Problem" - One solution and what to do BEFORE it happ

My Zen Micro 6GB recently croaked with the dreaded "firmware problem" message. After a call to support, I was told to send it in, however I was later able to connect to the unit and download new firmware.
Here's what happened:
In the middle of a playlist, the unit froze, displaying "firmware problem."
- I took the battery out and powered up in recovery mode, then tried both reboot and reforomat. No luck; Still got "firmware problem."
- I downloaded firmware updates, thn connected the unit to my laptop, which does not have MTP media explorer installed. The laptop does have Yahoo Music Engine and Windows Media 0, both of which are used regularly to copy music to device.
- The computer recognized the Zen Micro, but the firmware update did not run, saying it could not connect to the device.
- Retried several times, after reformatting, etc.
Now, here's what seemed to fix it
- Let the battery drain completely while in the unit
- Connected the Zen Micro to a computer with the MTP media explorer already installed. This is a system that is also used to regularly download music to the device.
- Allowed the battery to charge for an hour
- Started MTP media explorer, noticed that device went into "Recovery Mode"
- Ran the firmware upgrade and it installed.
This is conjecture, but it seems that the MTP media explorer must be running to launch the firmware upgrade, but you can't install MTP without a valid device connected. I don't know why this is - maybe some kind of copy protection scheme. I only had it installed on one of my computers because it seemed unnecessary and I hate loading software that I'm not going to actually use.
This is what worked for me. Hope it works for you.
I'm still really disappointed with Creative's warranty terms, lack of phone support past 60 days and failure of tech support to recognize the problem and offer a solution, but my unit is working again and I didn't have to send it back!

By "MTP media explorer", do you mean the MTP/PlaysForSure version of Zen Micro Media Explorer? The earlier versions say "(for MTP devices)"; the latest ones say "(for PlaysForSure devices)". Or do you mean the Microsoft "MTP icon" in My Computer, which should appear on all MTP-capable systems (including your laptop)?
I don't really think it's a DRM or copy protection issue; I think the "firmware problem" is wiping out the hardware code the firmware installer uses to confirm that the device is indeed a Micro instead of, say, an iRi'ver. I suspect ZMME is one of the alternate means it uses to confirm that a Micro is connected. (An issue for further testing is whether ZMME should be launched or just installed.) Firmware fails on all kinds of devices; I suspect this is just a peculiarity of Creative's MTP/Janus firmware installer.
This is likely to be a significant issue for the FAQs and/or Creative knowledge base. With a growing number of MTP/Janus players in the Creative lineup (Sleek, MicroPhoto, and shortly Touch & Xtra), it probably won't be just a Micro issue in the future.
Edit: I just read the other thread, and they seem to solve it by going to a system without Creative software and installing the ..0 firmware. So there seems to be two solutions for now:
If you don't have any Creative software installed, reload firmware and run the ..0 upgrade. (If you need 2.x firmware, then install the Creative jukebox driver and run the 2.20.05 upgrade; you can uninstall the driver afterwards. Sorry, but some of us need 2.x firmware.)</LI>
If you have the 2.x ZMME installed, open it, then reload firmware and run the 2.20.05 upgrade.</LI>
Message Edited by RBBrittain on 0-9-2005 0:06 PM

Zen Micro with PC connection Problems and no firmw

I'm running on Windows XP Service Pack 2 and I have Windows Media Player 0.
...and my Zen Micro wouldn't be detected, so I formatted it completely and I tried reloading the firmware. My old Zen Micro with v firmware still connects perfectly well, but Windows just doesn't detect my v2 firmware (now no firmware) Zen Micro.
Advice, please?
:edit:
Windows DOES detect my Zen Micro now...but I still can't do anything with it. It appears as MTP player connected:
http://i3.photobucket.com/albums/y52/bkblade/zen.jpgMessage Edited by bkBlade on 04-25-2006 2:4 AM

bkBlade,
Check this Knowledgebase article SID0053 and make sure the USB registry entry is correct. If you do make changes to the registry base on the Knowledgebase info, then try reloading the v2 firmware again.
Jason

When I charge my zen micro it says battery low and stays on that scr

When I go to charge my zen micro it turns on and comes up with a screen that says "Battery Low" then stays on that screen. Any suggestions or do I just need to buy a new battery or is my player broken or what?
Dakota

kind of hard to understand your message but i think i get the general idea.....it should say that until its charged........

Mac is making a whirring sound and screen is blank

My 2008 desktop Mac started making a loud whirring sound in the middle of the right when it was left on. It was turned off at the wall switch and when turned on in the morning, it started reving up with the same whirring sound and the screen was blank. After on for a few minutes, a file folder icon appeared in the middle of the screen with a large question mark in it. Mashing some buttons on the keyboard did nothing. Had just upgraded to Snow Leopard. Any suggestions?

Startup – Question Mark
Startup Issues - Resolve
Startup Issues - Resolve (2)

Petition to upgrade Zen Micro Photo to view pictures and play music at the same t

As you all are aware the iPod Nano faces off with zen Microphoto. Even though it isn't yet available at Creative.us and after waiting almost a year, I just had to grab one from Best Buy that sold out. I purchased it because of the huge 8GB harddri've, FM stereo receiver (that's how I get to know about new songs) and color photo capabilities. Unfortunately, everytime I try to watch a photo or play a slideshow, the music cuts off without warning and my bright and shiny player isn't a MP3 player anymore.Please, everyone, WRITE CREATIVE via Email and ask them to upgrade the firmware and software to stop turning off the music whenever we play photos. If the iPod Nano can do it... shouldn't the Zen MicroPhoto be able to do it also?Imagine not being able to play your sport team's music while you view your sports picture while you were playing ball. Imagine not hearing your wedding song while you view your wedding photos?Imagine not hearing your graduation song while you look back at your graduation pictures?How very horrible!Please petition Creative to fix this grave injustice please!Thank you ladies and gentlemen!Message Edited by Catherina-CL on 0-7-2005 0:33 PM

So, what you're saying is the iPod uses superior hardware components because they play images and music at the same time, even in the itty bitty Nano. Also, the iPod is able to "shuffle" photos so that you don't get bored seeing the same photos over and over again as in sequential mode.
There are a few players that do support music and photos... some will only limit one song per slideshow.
Furthermore, if you check the Zen Vision manual, creative's newest MP3 multimedia player... it does NOT support photos and music at the same time either.
In my opionion, it's a software issue, like I said, it displays only one image (background) during music play - if it couldn't, it would have shut off the image too. It's not that they CUT OUT creative features, but that they didn't write the software to allow the ZMP to "play" photos and music at the same time.
I mean, you can buy a PC for less than a ZMP and it can run several applications showing music and photo and videos at the same time.
I wouldn't buy the zen micro for nothing... there's just something special about having a color screen. I mean, who buys black & white TV these days?
With X-fi, I'm restoring my MP3 to higher quality, I'm sure the 8GB will come in handy as these filesize will only increase. And I got it because I'm hearing more and more music on the radio that I want to have... so my collection will only increase. I have over ,200MP3 at 320K which stood at 6.5GB.
As for you, consider that you're paying an extra $20 for 2 more GB and a 256K color display. It's well worth it over a 6GB monochrome MP3 player.

Creative Zen micro (no driver installation?) and cost of 5gb mod

Just wondering is it ppossible to copy music without having to install drivers? cause i want to use it at uni after i record lectures i want to access the lectures on my uni pc.
but currently it goes to install a driver and my uni pc's dont allow that
also is it true that with a recen firmware you can increase the size of the removable hard disk partition?
Finally if anyone is from australia would you know where the cheapest place to buy the zen micro is?
i see somepeople posting that they can get it for EUR$39 = AUD$25 which is a lot cheaper than AUD$329-$369 for the 5gb model that i have seen at dicksmith.

infinityx wrote:Just wondering is it ppossible to copy music without having to install drivers? cause i want to use it at uni after i record lectures i want to access the lectures on my uni pc.
The Zen Micro v2 firmware supports MTP. If the PCs have Win XP and WMP0 then they use a generic driver built-in to Windows.
Alternati'vely if you just want to transfer data use the USB mass storage mode.

Zen Micro making weird pong sounds and loads longer than normally

Similar Messages

Maybe you are looking for