Zen Micro "not connected" problem since upgrading firmw

Hi All,
I have had the zen micro for a week and it has been working fine with original firmware & software supplied on CD.
After noticing the battery life was poor, I decided to upgrade the firmware.
This is where all my troubles began...
After upgrading the firmware to 2.00.2 I found that when I connected my player it was now recognised at an MTP device and windows asks me if I would like WMP (windows media player) to sync with the device.
If I select yes, it tries to find the device in WMP and tells me it is not connected !
If I go into Control Panel- Device Manager tells me that I DO have a zen micro connected under the "Windows Media Devices" section.
Zens micro media explorer now also fails to see my device and thinks it is disconnected.
So I have no way of transferring files to my zen micro.
In an attempt to remove the problem I try going into rescue mode on the zen and reloading the firmware to an earlier version, with a version I have downloaded from this website .0.03.
The zen successfully erases the firmware and behold, my pc still fails to recognise the device so it cannot install any firmware on top of this.
So now I have a Zen with no firmware installed (and a "firmware problem" message everytime I turn it on) and a pc that won't recognise it anymore.
I have spent a good 5 hours this evening trying to fix this.
I have tried everything on these forums, but I simply cannot get my PC to connect to the zen micro, despite it recognising it everytime I connect it !
Please help before me or the zen dies !
Thanks,
Mat.

Here is a note I sent to the Creative support folks. They simply suggested I go back to firmware .0.03.
I have to admit, going back to the other firmware update does not seem to be the true resolution, but I really don't have any more time to waste fixing your bugs. So, I am now on .0.03. It's a good thing I synchronized all 920+ songs, or I would not be a happy camper right now. :-)
I will tell you it appears to be a multiple USB issue with your new firmware. I experimented with this, and found that if I have my iPAQ connected into my USB ports, as well as my USB mouse, my USB CD/DVD dri've and my USB Keyboard, the MTP explorer will not recognize the Zen Micro.
When I take the iPAQ out, magically, the Zen Micro gets recognized and the MTP Explorer is working. THIS ONLY HAPPENS WITH THE MTP FIRMWARE!!
I am now back to the .0.03 release of the firmware and none if this happens. As I write this to you, I have everything connected and I am ripping a CD to my device - no problems. I am fortunate however to have a laptop that I was able to do this with, otherwise I would be in the same place others are, and the upgrade frimware doesn't ever recognize the Zen Micro, even though it is in the Device Manager. ?
So, I would say, that your MTP firmware takes control too much, and seems to substitute for something like an iPAQ, where they cannot co-exist or other USB harware, such as a memory reader (CF, SmartMemory, etc.). This is not a PC USB issue, in my mind. It is a firmware issue that is causing the conflict.
Thanks.

Similar Messages

Zen micro not connect

after installing all the software on my computer (xp with all sservice packs),
the device shows up. but when you click on icon, it states that the zen is not connected?
installed it on different computer and it works fine,
can anybody PLEASE help me?
ps: does zen micro only work with usb2?
kai

the micro is backwardly compatable with USB aswell as working with USB 2.
often the front ports on a pc run on a built in hub, and the micro often has problems when connected through a hub, because it charges via usb port it requires a lot of power, the full 500mA offered by usb ports and through a non powered usb hub the micro often doesnt get enough power to function. so the usb ports at the back are usially the safest.
if the device is showing up in device manager, i suggest a full software instalation. encase something went wrong with it, also you could try updating the player firmware. what firmware do you currently have?

Zen Micro not connecti

A Zen Micro 6gig with ..0 firmware will not connect to my PC. I use a USB 2.0 cable and Windows Vista.
Any solutions?
I've run a disk cleanup. Taht's it so far.

I had the same problem on purchasing a new laptop running Vista. You have to change to running firmware version 2.xx (2.2.02 is the latest I think), which also formats the hard disk, so you have to back up all your music first!

Zen Micro USB connection problem solv

I've been having a major problem getting my Zen Micro to work with my Dell Dimension 2400 which I understand has been causing many people the same problem - I had various posts about this on the old forums.
To recap, the problem was that XP would detect the device but WMP0 would say that there was no device attached (even though it was visible in device manager) - the Zen MTP would also not recognise it's presence even though I had the plays-for-sure firmware installed.
After lots of searching I finally found a solution and here it is:
Run REGEDIT and navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet, right click the key called ENUM and select "Permissions"
On my machine, I had a group called "Administrators" and "SYSTEM" but that's all. Click "Add" and add a new group called "Everyone" (just type it in and click "OK" to return).
Highlight the new "Everyone" group and in the lower box check the box marked "Read" - this will ensure that all users have read access to this registry hi've.
That's it - it worked for me and I'm delighted at being able to use the Zen properly now, hope this helps someone else.
Normal caveats apply, so please be careful if you make changes to the registry.

gill wrote:
does the usb cable not charge aswell i think it does try taking the battery out and then pluggin the usb cable in . gill
I did that as well. Heres what happens. I take the battery out. I then plug in the USB cable and reinsert the battery. The title screen comes up and then goes to the next screen which just says "Creative" then locks up. The battery charging icon in the upper right corner does not flash to indicate that it is actually charging. I will leave it in this state for the next hour or so to see if it does anything for the battery. I suppose if I had a seperate battery charger unit, the unit would work normally. This is just a guess as I have not yet tried it.
Thanks
Brian

Bluetooth connection problem since upgraded Centro software to 1.07 spnt

I upgraded to 1.07 spnt and now when i connect via bluetooth the phone doesn't work. Right when i turn my bluetooth headset off, the phone works again.
I once again upgraded the software, and then I paired it with my bluetooth before i added any of my contacts, calendar, and everything else, and it worked perfectly.
What do you think is going on?
Post relates to: Centro (Sprint)

Are you having the same issue after you sync the phone to the PC?
Post relates to: Palm i705

Problems with Zen MIcro not turning on or

I have a problem with my Zen Micro not turning on or off. The only way to turn it on is to plug it into the power or USB cable :-(
I have done a quick search and the posts that I have found on this topic suggest that I will need to send it back to Creative! Anyone found a "magic" solution for this problem other than sending it back?
I have done a firmware upgrade just in case that would solve the problem but unfortunately it did not.
What with this problem and the earlier problems I had with battery life I am thinking of sending the thing back and going for a different Creative player. The Zen Sleek seems to have a good range of features ... anyone had any good or bad experiences with the Sleek?
Any comments appreciated.

well..unfortunatly i have had this same problem. i made a topic about it and some of u may have read it..i can't seem to find it now. but i have found the resolution to this problem..send it back! i baught my from circuit city..i just got home from there..very nice guy helped me out at the customer service counter. grabbed my receipt,all the contents it origionally included and the box and headed to circuit city. i did exchange the zen micro for another zen micro. we both converstaed with eahochter about how i have heard other ppl complain about this problem. creative needs to do there homework. hopefully it won't happen to me again.

[Edit]Problem with Zen Micro when connected to PC-- cleared but another prob

Hello,
My problem is that my Computer (winxp, sp2) does not identify my zen micro any longer. few days ago it worked perfectly but now it doesnt work.
my zen micro has the firmware with the MTP/plays for sure
I had installed the things from the cd, when I bought it, that was in the package and then new drivers and the new applications, so two programs. (I had two Zen Micro symbols on my desktop but I could only use the program with MTP)
it worked fine.
a few weeks ago I had the same problem, but after a few connectings and disconnectings it worked again.
today this doesnt helped. I uninstalled everything what had to do with creative and then only installed new drivers and the newest applications (without the things from the cd).
it still doesnt work.
when I click on the "Zen Micro Media Explorer (MTP)" on the desktop I can see that my zen micro is connected. When I go to my playlists and click on one, it seems that my playlist is "empty". but in the mp3-player there is the playlist!
when I click on my music folder, where all the music is I see the folders, but when I go into the folders, the folders are also "empty".
what happened? I changed the usb ports--> doesnt work...
what can I do in order to use my zen micro again on the pc. my zen micro works fine(playlists and songs work normally), but I have problems having connected it to my pc... I cannot copy songs and edit my playlists anymore. is there any way to edit the playlists via mp3-player without connecting to the pc?
I hope you have a helping answer for me.
Regards
eX
by the way: new forums look good Message Edited by expredator on 02-07-2005 09:22 PMMessage Edited by expredator on 02-08-2005 0:57 PM

ok guys, I almost solved the problem. I used the rescue mode, used clean up, and now the folders are not empty and I can copy songs into my Zen Micro.
But the playlists are "empty". Also when I want to create a new playlist it says that my mp3-player is not connected ?! But it is! I can copy files into it!
I also cannot synchronize it with WMP0.
I reinstalled software and it didnt help...
So what can I do? It is connected but I cannot edit my playlists.
Is there any way to edit the playlists via the mp3-player and not over the pc?Message Edited by expredator on 02-08-2005 :00 PM

Zen Micro 5gb unusual problem.

Firstly, I have searched for other posts, but can't find my particular situation described, so please forgive if this is actually addressed elsewhere, I just couldn't find it.....
I bought two Zen Micro 5gb units, for my wife and daughter.
At first, they both worked great. No problems connecting to my windows xp pro computer, transferred files fine, even if it WAS slow due to USB ports being ., but like I said, they both worked fine.
Then, the next day, I downloaded an upgraded driver for my wife's zen, for the jukebox software. Ever since then, her zen will not connect to the computer, it always says device not connected.
The strange thing is, though, that my daughter's zen still connects without any problems, and transfers songs just fine.
Here's the firmware info:
My wife's Zen (the one the will NOT connect): Firmware (System->Information) : version .02.05
My daughter's Zen (the one that works fine): Firmware : .0.03......
I'm emailing this from work, and I don't have either mp3 player with me, so I'm hoping I have the numbers correct on the firmware, however, I DO remember for certain that the player that WON'T connect has a slightly higher version number than the one that works okay, and that they both start with ""; in other words, neither have firmware version "2.x"...... I even tried updating the firmware on the non-connecting unit, but, alas, it said the unit was not connected, so I was unable to update.....
After all this, I didn't dare do anything to the other unit....
BTW, I did try both players on the same USB port, using the both USB cables, and still, my wife's player would NOT connect but my daughter's did.... I also switched to another port, with the same results.
Thanks for any and all help,
James Bentley
[email protected] Edited by jrbentley on 0-03-2006 05:22 PM

I apologize for not updating this thread sooner...... I got a Creative support rep on the phone, he directed me to the Device Manager, which listed the player, but showed it to be disabled. I enabled it......and the player is working just fine!
Thanks for all the help here and thanks to the Creative support rep.....!
James Bentley

Problems since upgrading to Mavericks

I am experiencing problems with CC applications since upgrading to Mavericks. Mostly Screen and display issues.
In Photoshop, the top menu bar where the red, yellow , green window buttons normally sit has disappeared and it seems I cannot drag the window down to reveal (if that is the problem)
In Indesign, The program opens but I cannot see any workspace at all, even when I open an existing ID file.
Premiere Pro, Bridge, appear to work OK
After effects and Muse indicated both required upgrades, yet the CC application Manager does not indicate any upgrades required or available.
I have not tried other apps.
Is anyone else experiencing problems since upgrading to Mavericks and if so, does anyone know if Adobe are working on fixes?

I upgraded to Mavericks on two computers and have display problems too! I have CC on one Macbook Pro (2011) and CS6 on another (2012) and I'm now almost positive my display problems are triggered by InDesign. I don't have to be doing anything special, and I don't have to be working in InDesign at the time, but InDesign has to be open and I get things like this:
Once it turns magenta or green, that's when I have to boot the system. I can still work with the glitchy display before it turns colors and if I'm still able to quit InDesign while it's glitching, the display goes back to normal. Same on both computers and the 2011 one has a new logic board in it.
At first I thought it had something to do with connecting my hard drive or my external display, but the display issues happened with both computers with nothing hooked up. Those are ruled out now. I took my 2012 computer to Apple and they told me it was a software issue and all my hardware is ok. Obviously they didn't fix the software issue because it's still happening.
This is not normal and needs to be fixed soon!

Zen Micro not booting up and recovery mode doesn't do anyth

Hi,
I just got my Zen Micro yesterday and it worked fine until the second battery charging.
I charged it using the AC adapter. When it finished charging I tried to turn it on but it wouldn't go past the Createi've log (the second screen after the one with the copyright notice)
Since then I've tried all the options in the recovery menu but they don't seem to have any effect. (The recovery mode displays "Creative Zen Micro v0.0.58 at the top)
I tried "clean up" and gave it at least 30 minutes but it didn't finish.
I tried "reload firmware" but after some time I took out the battery and it still gets stuck at the second Creative screen. I don't get the firmware error screen.
Also tried the format and reboot options... nothing.
Yesterday I upgraded the firmware to .02.05 firmware and didn't have any problems. All the software also worked fine on my WinXP machine.
Would appreciate your help.
Thanks,
Greg.

I've had the exact same problems as GregL, except that I have the original firmware that came with the Zen Micro (I was planning to upgrade it until this whole mess happened).
I charged it fully a few times, and it'd been working fine for about fi've days, and now, I can't get past the "Creative" logo screen! Recovery menu works, but the options don't seem to get anywhere. They never get past "Erasing Firmware", "Scan Disk", and the like. I've tried rebooting and I've tried removing the battery, but nothing has changed.
Does anyone know what might be wrong with my Zen Micro?
-MysticBoo

Zen Micro 5GB - Installation problems - HELP ple

Dear All
I am sure must have been asked before, so please bear with me.
Just bought a Zen Micro and cannot seem to install the supplied software from the CD. Keep getting a InstalWizard 6003 error message. Have tried restarting, deleting temporary files (even connevting to net) and still get same message.
Have tried to install then by copying files to harddri've and running from there but that fails.
What am I to do or have I a dud?
All suggestions greatefull recieved.
Andy

I was also thinking - how's your cd player on the pc - is it generally ok ?
try copying the files from the cd to your hard dri've and running from there.
Sometimes you can get -6003 errors if some of the source files are unreadable for any reason.
If that fails then i suggest downloading from creatives website and trying the install again incase you just have a dud cd.
Seeing as you've just got it i'll also tell you from my own experience......
I have a zen micro 5gb bought it about 3 months ago and had no problems with the installation but that was on a fully patched up to date winxp sp2 with 2Ghz memory.
I did have issues with the zen micro itself hanging but i upgraded to the 2..02 firmare beta and it has been happy ever since.

Messages App| connectivity issues since upgrading to Mavericks

is anyone having problems since upgrading to Mavericks with connectivity issues in the "Messages" app? Im on a 2011 MacBook Pro. I will start a desktop share session with my folks (IMAC) and within 2-3 minutes of having access to their desktop, I'm unable to control any longer and their system freezes.

HI,
When iChat 3 came out someone tested whether it would work on the platform that was running iChat 2 and also tested whether iChat 2 would work on the later OS.
This eventually led to the Reinstall procedure for iChat 3 up to the iChat 5 version.
Since then the app has required either a Backup version from when it was working, a copy on another machine running the same OS and app version numbers (the two go hand in hand) or you have to Reinstall the whole OS which will always update you to the latest version of the OS (and in the case of Messages any updates it has had).
8:01 pm Saturday; December 21, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Ipad3 problems since upgrading to ios8n

Is anyone else experiencing these problems since upgrading to iOS 8?
- Need to touch screen several times for a nornal one touch action (note: Screen size/position changes a bit after each successive try.)
- keyboard response slow at times and at times freezes
- screen content/image has expanded slightly but enought to put some perimeter icons and controls outside/off the screen.
Are there fixes?
ios7 worked beautifully!!! Why won't Apple allow their currently loyal ( but frustrated) clients to revert back to ios7?

Hi Go to settings Restore back, to Factory, settings After Restore use same Apple ID & password, then you will get all your apps & data, back. This will get rid of any bugs. I do this every 2 months, or so on iPhone & iPad. Cheers Brian

Problems since upgrading to v9.10

Has anyone else encountered problems since upgrading to v9.10?
Firstly there appears to be an issue with OLT no longer working in Firefox (3.6) as the "Build Scenarios" lists (select scripts) don't populate. Fortunately it still works in IE7, so I can at least revert to that.
Apart from that, what's more of a problem is that I've found some previously working scripts are no longer working in OLT (but I haven't yet found a pattern).
e.g. 1) One webservices script for product 'A' works, yet another for the same product comes back with "Orphaned agent" and "Failed to load script class for script X".
e.g. 2) A similar set of scripts for a different webservice 'B' also has one working and the other with the same errors generated.
e.g. 3) I have some web scripts that work, but others come back with the errors shown.
I have also noticed that if I attempt to run multiple scripts e.g. load a previously working scenario containing 12 scripts, none of the scripts runs (as the agent has failed to start because of at least one of the scripts). The same is true if I try and run a single working script with a single non-working script; both fail with the message from the non-working script (both would be using the same agent).
So far I have only tried converting a (new copy of a) single script to the v9.10 format but that didn't seem to make a difference. Pre-v9.10 scripts should still work in OLTv9.10 though; the conversion shouldn't be necessary.
I have tried the usual things (re-starting the services and even the OracleXE database). Any suggestions?

I too have FF3.6.3 but after signing in, I get the Build Scenarios page displayed but the "Select scripts & user-defined profiles" box with "Path: Scripts Only" list has nothing in it. Changing to "Scripts and Directories" makes no difference, still nothing is shown in the list. The repository should have multiple directories with multiple scripts (as shown when I try the same thing in IE7).
I now suspect this too may be down to some problem during the upgrade of the DB from v9.01.1 to v9.10 the odd thing with the script failures is the error doesn't seem to indicate anything wrong with the script itself; just that the agent failed to load the script. You get OLT Server Warnings that say "Stopped Autopilot because of error on agent "[name]" and the VU Grid shows my (single) VU with error "Failed to load script class for script [name]".
One particularly odd thing is that if I try adding 2 scripts in the same batch (a working and non-working one) with a delay between them the following happens:
1) VU1 with working script starts and completes OK (total time around 48s)
2) VU2 starts after delay (120s) but immediately comes back with the OLT Server Warning.
3) *BOTH* VUs on the VU Grid now show the same error about the agent (despite the 1st VU having completed sucessfully).
The agent seems to run happily with a working script until it is asked to load another (non-working) script which then kills the agent?
Here's the relevant section from the databaseConfig.log from when the upgrade was installed, as I suspect this is where the problem started:
+[Apr 16 10:21:42] INFO (SchemaUpgrader.java:43) - Starting upgrade for schema Oats+
+[Apr 16 10:21:48] INFO (SchemaUpgrader.java:50) - Schema Oats is version 9.01.1+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script db_users.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script init_ats_dbs.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script oats.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script oats_template_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script olt.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script olt_sample_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script olt_template_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script otm.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script otm_sample_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script otm_template_data.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4c Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Access.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script upgrade-oats.9.01.1.sql does not match the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:71) - Script upgrade-oats.9.10.1.sql matches the filter+
+[Apr 16 10:21:48] DEBUG (SchemaUpgrader.java:82) - Script upgrade-olt.9.01.1.sql does not match the filter+
+[Apr 16 10:21:48] INFO (SchemaUpgrader.java:89) - Processing upgrade file upgrade-oats.9.10.1.sql+
+[Apr 16 10:21:48] INFO (SqlScriptRunner.java:51) - Running script file C:\OracleATS\data\scripts\en\upgrade-oats.9.10.1.sql+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:96) - Upgrade complete for schema Oats from version 9.01.1 to 9.10.1+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:43) - Starting upgrade for schema Olt+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:50) - Schema Olt is version 9.01.1+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script db_users.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script init_ats_dbs.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script oats.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script oats_template_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script olt.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script olt_sample_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script olt_template_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script otm.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script otm_sample_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script otm_template_data.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4c Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4b_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4d SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4c_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4e SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4d_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Access.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f Oracle.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script Update v4e_to_v4f SqlSrv.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script upgrade-oats.9.01.1.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script upgrade-oats.9.10.1.sql does not match the filter+
+[Apr 16 10:22:05] DEBUG (SchemaUpgrader.java:82) - Script upgrade-olt.9.01.1.sql does not match the filter+
+[Apr 16 10:22:05] INFO (SchemaUpgrader.java:101) - Nothing to do for schema Olt. Schema version stays 9.01.1+

My text messages will not send out since upgrading to iOS7.0.2.

My text messages will not send out since upgrading to iOS7.0.2. What do I need to do?

It seems Apple has a glitch with text/imessages in iOS7 and they are trying to fix it. Many people get it working again by simply restarting thier phone
For me, restarting the phone kind of corrects it for awile but then it starts doing it again. My phone gives no indication the messages havent gone out till after I restart it! Huge problem since I cant tell when it quits sending! I have to keep restarting my phone a couple times a day to make sure all my texts went out!
I also found this procedure but it also seems to be only a temporary fix much like restarting your phone.
Go to Settings and into Messages and disable iMessage. Go into General then into the Reset tab (bottom of the screen). Next, select Reset Network Settings, confirm the choice, and wait for the iPhone to reboot. Once the phone restarts, toggle iMessage back on again.

Zen Micro "not connected" problem since upgrading firmw

Similar Messages

Maybe you are looking for