Zen Micro not working out of the

So I followed the instructions and charged it up, after about 3 hours or so the charge icon disapeared... cool I thought... I unplug it and turn it on.
The screen start up is pretty I think, but now I can't get it to do anything.
The screen looks a little like this:
Now Playing [|||]
Select music to PLAY
form the Music Library
--:--:-- -00:00:00
I am not pleased about this....
I have tried updating the firmware but the update bar goes half way across then hangs..
I even downloaded the new creative software but I am starting to regret it.
I would appreciate some help please...
Anyone

The most important thing you gotta do is install the latest drivers and software. You can't just take it out of the box and start using it like the iPod. This what a lot of users hate, but deal with it, it's only a small problem. It's not like that problem will decide your fate on getting an MP3 player.
If you don't install the driver, problems will occur with your MP3 player.
Flash the firmware if you want to but decide if you are going to use "playsforsure" service like Napster to Go. Flash to the latest 2.X firmware.
If you are someone who likes to download MP3s or rip it from CDs, flash to the latest .X firmware. I use the latest .X and I have no problems with it so far.
The reason why you can't do anything on the first screen is because the Now Playing screen has no music selected. This doesn't mean your MP3 is broken and that you should start running some tests and fixes. And finally if you don't have your headphones connected, controlling the Micro will be very hard. This problem happens to everyone.
Take my advice, install the latest software and drivers at least. Then decide if you still want to use WMP0 or not. I hate using WMP0, it takes up too much computer resources. And if you think your Micro is broken, then you have to call creative about it.Message Edited by Shinryuu on 04-22-2005 0:54 PM

Similar Messages

Zen Micro not working

Yes, I know, loads of other topics with the same problems... Sorry... But I've had my Zen Micro for well over a year now, and it's worked like a dream up until now. Suddenly, this morning, the keypad froze. And the on/off button would not work. I did the usual thing in these situations, removing the battery and putting it back in again. Problem still went on. I tried uploading more music because I was out of ideas as to what else to do. And by the way, I've never updated the firmware in it, or whatever it is you download on to it, because I physically can't (I only have 2 USB ports, my sister broke the two on the front, so I must remove the internet to plug the Zen in). So has anyone else had the same problem? If so, how did you fix it if you did get it fixed?Any help would be much appreciated.

Hi,
I'm trying to repair my friend's zen right now. It appears that your zen has a problem with the power switch. Try taking off the cover and looking at the connections where the power switch connects to the board. My friend's micro power swith broke off and has the same symptoms, hopefully you can just resolder one of the connections and it will work again. If anyone knows where to get another power swith, that would be great cause my friends micro no longer has one...Message Edited by nahatley on -02-200609:02 PM

Zen Micro not working, frozen when reboot

I recently purchased a zen micro 5g. For some strange reason my player froze I attempted to shut it off, it did not do it. So I removed the battery put it back in, the creative screen illuminated and was stuck there and makes a weird noise that is soft and can only be heard when I put my ear up to the battery when , I could still not shut it off w/out removing the battery. I did the recovery mode and each option I choose it gets stuck on. So I tried to download a firmware, followed the instructions?and all went well and I connected my device to my computer and it did not recognize it, the creative mediasource doesn't recognize it nor does my computer. But I know the cable works because I can connect it to the player and remove the battery and the screen stays on. This is very frustrating because I bought this recently after losing a Samsung. If no one here has a solution than can someone suggest how to return the product for repair or replacement sich I bought this about 3 weeks ago and it is still under warrentyMessage Edited by nub88 on 07-23-20070:53 PM

Did you download the right plugin for MediaSource? What firmware version are you using?
If you're using the v.xx PDE firmware, make sure you have downloaded and installed the following:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource
4. Creative Zen Micro Media Explorer Web Update
Install , then connect the player to the PC. Then install 2, 3 and 4 (the player must be connected for 2 to verify you have a Creative product).

***Dropped Zen Micro Not Working 100%

I recently dropped my Zen Micro Mp3 player from a height of about 4 Feet. When I turned it back on I found out that the Player was not working correctly. I can only scroll up (no matter what direction I scroll it always moves up). Im not able to use any other options besides "All Tracks" because I cant scroll down to select them. My Volume is always at MAX because I cant lower it. I can still use the Fast-Forward and Re-Wind buttons. The Play/Pause button still works. So do the "Menu" and "Back" buttons. The only problem is the Scroll bar(or button whatever its called). It can tell when im touching it because it shows the volume that its at and it can still scroll (Like I said before,only up). Anyone know how to fix this without having to send it in? I dont have a warranty anymore.

Hmm, thats odd considering i dropped mine over 0 feet onto a concrete floor and it works fine, considering that it beeps every so often. Well, to your problem, have you tried recovering the player by taking the battery out, and turning the power on at the same time you are putting the battery in?

Zen Micro not working prope

Hi - I'm sure my problem is not an unusual one and I am posting purely out of sheer desperation. I currently have a Creative Zen Micro 5GB.
For some reason, my PC is not detecting my Zen Micro. I even unplugged it from one USB port and connected it to another (I have 3) and nothing. I downloaded and installed the latest organizer and the plug-in as specified in the FAQ. Still nothing.
Under My Computer, my device shows. But when I open the Zen Micro Explorer, it says that my device is not connected to the computer. In the Organizer, I can't see my device either. I can sync from Windows Media Player (where my device shows) but doing that does not allow me to create playlists (unless it's some neat trick I don't know?).
I'm at my wits end and really on the verge of buying another MP3 player that is NOT Creative. I have only had this device since October and I started having firmware problems only 2 weeks after purchase.
Any help anyone can offer is greatly appreciated.
I am running Windows XP - and have uninstalled and re-installed the Creative software.
Thanks!
Marcy

Did you download the right plugin for MediaSource? What firmware version are you using?
If you're using the v.xx PDE firmware, make sure you have downloaded and installed the following:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource
4. Creative Zen Micro Media Explorer Web Update
Install , then connect the player to the PC. Then install 2, 3 and 4 (the player must be connected for 2 to verify you have a Creative product).

Zen Micro not working, neither Recovery M

Hi people,
I had been having problems with my player for more than a year and I left it over. Now i'm trying to make it work
First of all, the player gets stuck in its white screen.
Then, when I go recovery mode, I can't choose any option, and lately it's has been loosing bright also
When I try to connect it to the PC, it's recognized as a Generic usb device, but with malfunctions
The strange thing is that, after trying many many times, I had been able to choose "format" in the RM, but then it was 'formatting' more than any day without any new. Player was not full, neither dropped.
BTW, It's very difficult for me to send it back to Creative since I'm from Argentina. I bought it in Chicago maybe 3 years ago, and it didn't worked more than 6 months
If it's useful, I'm able to read that the FW is v.0.0.58
I'm looking forward to have a solution soon
Regards, zAnteeh

Did you download the right plugin for MediaSource? What firmware version are you using?
If you're using the v.xx PDE firmware, make sure you have downloaded and installed the following:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource
4. Creative Zen Micro Media Explorer Web Update
Install , then connect the player to the PC. Then install 2, 3 and 4 (the player must be connected for 2 to verify you have a Creative product).

Power switch on Zen Micro not working. Hold works, though. It turns on if I plug it

I was given my friend's Zen Micro because it was broken.
So I opened it up and managed to fix it...but it only turns on when I plug it in to the PC.
I can switch the hold button across and it holds (the padlock shows up on screen), but I can't actually switch it on or off at all.
To turn it off I have to wait 'till it idles out.
And to turn it on... I have to plug it in, like I said.
What could I do to fix it's The switch looks normal on the circuit board...but I can't help but think that something inside the switch has become disconnected...but it's a bit too small to actually take apart.
The only alternati've I can think of is to buy a wired remote...but that's my last resort.

OK, your Zen Micro worked with your older computer, correct?
Was your older computer an XP machine or an earlier version of Windows?
As far as I know, XP requires the PlaysForSure firmware to work with your Zen Micro. You need Service Pack 2 and Windows Media Player 0 too.
You can find the drivers, firmware and software that you need by clicking the Support menu on the Creative banner at the top of the page-> Downloads->MP3 Players-> Zen-> Zen Micro, select your language and Operating System and then the drivers, firmware and software that you need.
Be sure to click the <i>Show Details...</i> pop-up for more information and instructions.

Brand New Ipod touch 4th gen right earphone jack not working out of the box. Bought at Wal-Mart yesterday. Are we missing something in the set up or should we return it?

We just purchased an ipod touch 4th gen 8 gb from Wal Mart. OUt of the box the right headphone is not working. Tried numerous pairs of headphones..tried the mono settings and nothing is working. Is there a setting we are missing or should we just return it?

If the headphone plug is fully inserted, I would return the iPod for a replacement

Intel(R) ESB2 SATA RAID Controller not working out of the box

Dear all,
I'm using, for my tests, an old server with a supermicro X7DBN Server motherboard.
This motherboard comes with an embedded Intel(R) ESB2 SATA RAID Controller.
When I try a native installation from the technical preview DVD it sees the RAID1 volume that has been created (2 disk mirror) but when I select it to proceed with the installation there is an unknown error stating that it's impossible to write to this disk.
The same installation works perfectly with 2012R2 and the out of the box driver provided bin the install media.
An update from the previously installed 2012R2 to the Windows Server Technical Preview also works without problem.
It would make sens for MS to revert to the driver version embedded in 2012R2 for Intel(R) ESB2 SATA RAID Controller which is:
Name : Intel(R) ESB2 SATA RAID Controller
Date : 10.08.2010
Version : 8.6.2.1025
inf section : iaStor_Inst_RAID
Device ID : PCI\VEN_8086&DEV_2682&CC_0104

Hi,
Thank you for the information. As you said from the behavior it seems that the build-in drivers of Windows Server Technical Preview will not work with the specific motherboard hence the RAID1 cannot work well.
I'll log the issue down.
If you have any feedback on our support, please send to [email protected]

HELP APPRECIATED. Zen Micro not working or displaying text

So, um...my Zen Micro suddenly stopped working. It was working fine yesterday. I charged it and turned it off, then later went to turn it on and...well...everything lit up fine, but no text, no symbols, nothing is displaying. The screen is lit up, the blue around the pad is lit up, but nothing is displaying on the screen, no matter how many times I turn it on or off. It still plays music on my computer, but that's about it. I already tried resetting it by removing the battery for 5 seconds and putting it back in. Tried that a few times, still nothing. Help?Message Edited by wolfwonderess on 02-03-200702:8 PM

bump

Zen Micro Not Working-If you can help-Please

I just got this zen today. I signed up with Napster to go. Downloaded the new firmware driver updates. Made sure my zen was fully charged before using. Plugged my zen into my computer. Transferred songs from Napster to MP3. Napster said the transfer was complete. Unplugged my zen and the screen says "Now playing Select Music to PLAY from Music Library" It won't play any songs, and no songs show up which leaves me to believe that no songs actually transferred like it said they did. I am so upset! I have been at this thing for three hours already! I just want my music to play! GRR!

krystennicole, the thing with the Zen Micro (and other players, too) is that they use playlists. This means that it doesn't matter if you got 000 songs in it, it won't play anything that's not in the playlist.
Now, you JUST loaded up your songs, and you have an empty playlist. What you need to do is add all your songs to the playlist to be able to listen to them. Later you can make playlists for separate genres if you like, but let's concentrate on what you want to do now: Listen to your music.
Not sure if this is stated in the manual of the ZM, but here's a quickstart.
Go to Music Library, and select All Tracks. Scroll to the one you'd like to begin with, and click Play. Now, all your songs will be loaded into the "Now Playing" list, and you'll be able to listen to all of them!

Zen Micro not work

When I turn my zen micro on it lights up in just stay on the opening creative screen. Also for the first few seconds it makes this werid buzzing sound. What should I do?

do you hear any (low-volume) ticking sound... (during the boot sequence...) Ppl have reported hearing such ticking sounds, and the explanation usually was a minidisc failure.
btw, did you do any running or other excessiving shaking while it was on? that's to be avoided Message Edited by fred_be9300 on 06-22-2005 05:35 PM

23" Cinema- does not work out of the box

Happy Holidays guys.
Could there possibly something very stupid that I have done that would cause this brand new monitor NOT to work? This is very disappointing.
The G5 is brand new.
I have tested a smaller monitor on it, which works...
-The cinema monitor, is connected by dvi, usb, fw, dc and ac.
No power light upon startup.
-display prefs can see the cinema monitor
(while using the smaller monitor, I can see it in arrangement prefs)
-sys profiler can see the GeForce 6600LE and the cinema display.
how likely is it that I was sold a display or power adaptor that is faulty?
G5 d2.0 Mac OS X (10.4.3)

Just incase you missed it, did you hit the power switch on the right side of the monitor?
Patrick

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. Is my info safe??

I received a text today while at work about iCloud keychain verification code. I have not signed up for it or anything that uses it. I work out of the city with limited internet access so not sure why I would be getting this. I only got this number about a month ago. Apparently someone else had the number before because I get texts from his family members wondering whats going on. I got one yesterday and the person didn't seem to thrilled that the number was cutoff and today I got 2 texts about iCloud Keychain which I don't even know what it is. Seems suspicious to me. If the person who use to own the number is doing it he should know it is not his number anymore because he obviously didn't pay his bills. I'm not too sure about iCloud Keychain so just want to know my info safe?? It says it can store credit card numbers which is what gets me worried. Frankly I think it's pretty stupid to save that kind if information with any kind of app. But I don't want some random person trying to access my personal information because they are bitter they lost their number. Please let me know as soon as possible so I can change passwords or anything that is needed.
thanks

If it were me, I would go to my carrier and get a new number. Since you have only had it for a month, the inconvenience would be minimal.
Barry

My IPOD classic headport is not working properly. The sound is going in and out?

My ipod classic headport is not working properly. The sound keeps going in and out. I have tried changing headphones and checking the settings. Does anyone have any ideas?

Do a Hard Reset
After charging till full charge, at least 2 hours (preferably 4 hours)
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
If the sound is still the same, but ok, coming from the bottom Dock connector, then try cleaning the headport, using a jet of air or some electronic cleaner.

Zen Micro not working out of the

Similar Messages

Maybe you are looking for