Zen Micro Photo Firmware 'Update Fail

Ive tried several things, several computers. The Zen will only boot to the firmware screen if not docked. If Docked the Zen can update but at the end, it will always say, 'Update Failed!'?I was wondering if this is the Motherboard, or the Hard-dri've. I dont hear any clicks or sounds from the hard dri've.

This all started a few days ago, the Zen was playing a nice track and then it turned off, I turned it back on thinking wtf. It came on, played for about sec then said, 'Overheating Shutting Down'?so I tried a few more times and it said the same thing, it was rather Cold outside, wierd. I went home, let it stay infront of a fan for a few hours and thats when it wouldnt even boot after that. Then I couldnt recharge the battery for some odd reason, and the update didnt want to install, So i had my old BROKEN ZEN MICRO which has the same EXACT PROBLEM, anyways, I took that battery and used it cause it charged unlike the ZEN MICRO PHOTO Battery. After that, then I installed the update, but then it gave me that problem of Update failed, so here i am now...

Similar Messages

Zen Micro Photo firmware 1_20

Hi, i have some problems upgrading from my current firmware .0.0 "Zen Micro Photo"
to the firmware .20.0, i have downloaded the program that sould upgrade the firmware.
and i followed the instructions,
Download the ZenMicroPhotoP4S_PCFW_LB__20_0.exe file into your local hard disk.
Connect your player to your computer.
Double-click the firmware update file and follow the instructions on the screen.</LI>
easy right ?
well it wont work when i double-click on the firmware upgrade file, it starts the program, and i can se that my zen micro photo, goes out of docked mode, and then the upgrade program tells me this message: Your player is not connected, please connect your player.
and let me tell you.. my zen microphoto works just fine accept this firmware stuff.
the only thing that also bugs me, is that the MTP dossent work under win2000, my work computer runs 2k, oh and why cant it just recharge when my computer is closed. theres 5v DC output on the USB anyways. why does it need the software to recharge ?
? Its all greek to me ! ?
does anyone know how i can solve this problem(s) ?

I run windows XP pro . sp2, its quite strange.. it should work. ! **bleep** IT SHOULD WORK ! :smileyindifferent: , and the wirld thing is. i also try'ed it on another windows XP machine at work.. and it didient work there either. im beginning to question if this is the product for me. its realy sad though, i love the zen design.. not to mention the price.
It realy realy bugs me that the zen micro photo isset supportet on windows 2000, i had this vision of syncronizing my work calender with the zen ... and now its just not possible ! unless my boss wants to give me a new laptop.. and i dont think that will happen . hehe
Well i will keep on working on this issue.. ill let you know guys.

Zen Micro needs firmware update for Vista, but what now as it fail

As I now use Vista (paid for by my work) I came to install my Zen Micro which wasn't recognised so I came to the website and discovered that you need version 2 of the firmware for it to be compatible with Vista. Having never had the need to upgrade before I was still on Version one so I downloaded it onto my other WinXP machine?which I've used my Zen on alot before to do the upgrade. Started the upgrade and all seemed to be well until a point a 3rd of the way through a box came up asking what I'd like to do with the device (like the one when a USB key inserted). Leaving the upgrade I returned hour later to see nothing has changed and the upgrade has failed.
I've tried all the options with recovery mode but it still just shows up as having version 0.0.65 and when inserted into a PC shows up as a?Creative Zen Micro?in device manage and has a 20MB disk partition for storage but when I try and run a firmware patch it says its not connected.
Looking round this forum this seems to be quite common upto now but with the release of Vista people are forced to take the 'risk' of running a firmware update that when it fails doesn't seem to be recoverable even in recovery mode. Please can you look into updating the firmware to find these devices that it can't see, for many years I've laughed at my friends with their crashing ipods that need charging everyday due to not being able to change the battery but it now seems the jokes on me.

I used Adambonello's fix and it worked?http://forums.creative.com/creativel...mp=true#M80097

Zen Micro 5GB Firmware "Upgrade Faile

Zen MicroFirmware: 2..02?Have just bought it from america, have tried installing both firmwares from the site, and both of them say "Upgrade Failed!" I havent installed any of the software from the disc except the Zen Micro driver, my pc didnt need this but i thought it would be best to. Also i can only add tracks to it through WMP 0, i cant drap and drop in windows explorer, why is this? On my old creative muvo n200 i could do this fine!?Some help please. Do i need to erase the firware in the recovery menu? I am just running the downloaded applications when my player has the docked icon on the screen.
Message Edited by ajay6 on 03-5-200607:28 PM

Thanks for help.
Major problem solved.
Already upgraded to new firmware.
I do it by:
1. uninstall all creative application and plugin.
2. using registry cleaner to clean the registry.
3. downgrade WMP to WMP0
4. Detected by WMP as MTP device, loading firmware upgrade, closed WMP. upgraded.
Now it Working fine already, just still have some problem is:
. Only WMP can detect it, all creative application can't detect it..
thanks anyway.

Zen micro photo firmware h

um well i dropped my zen and the battery fell out and normally it will say restoring media library when i turn it back on but this time it froze. then the recovery mode came up and i reformated it and cleaned it then i clicked the firmware update. i read later on that i should have connected my zen to the comp and had already downloaded the new firmware update but i didnt. now it wont load the update and i cant figure out how to fix it! whenever i try the update from my comp it will say its loading it then it says it wont load for some odd reason. someone help! what do i do?

Under normal circumstances, it should load.....unless the fault is due to you dropping the player which causes the microdri've inside to become faulty.

Zen Micro Photo bugs need to be worked out - firmware update comi

Hi,
I've had my Zen Micro Photo 8gb for a month & have discovered some interesting quirks: first, I don't believe mine is defecti've, though I've had problems. I have encountered freezing on both the "Zen Microphoto" logo and "rebuilding library" screen; I scoured this forum and the Knowledge Base for answers, trying all that seemed applicable?- I tried disk cleanup and reboot (leading to rebuilding library freezes), reformats & carefully reloading the latest firmware?a couple of times. I've drawn some conclusions:?) Mediasource software is not working for me; when I switched to using only Windows Media , most problems went away.2) For whatever reason, "rebuilding library" can only be accomplished while my Zen is connected to the computer - should this be the case?3) It seems like the times my screen freezes on the "Zen Microphoto" logo I may have held the "on" switch to the side a little longer than necessary; I'm wondering if this is happening because I'm holding the switch on a little too long?Anyway, I love the size, look and sound of this player, so I hope to keep using it. NOTE: can anyone from CREATIVE tell me if there will be future firmware updates? Thanks
!!! Steve M.Message Edited by smills on 08-0-20070:24 AM

I run windows XP pro . sp2, its quite strange.. it should work. ! **bleep** IT SHOULD WORK ! :smileyindifferent: , and the wirld thing is. i also try'ed it on another windows XP machine at work.. and it didient work there either. im beginning to question if this is the product for me. its realy sad though, i love the zen design.. not to mention the price.
It realy realy bugs me that the zen micro photo isset supportet on windows 2000, i had this vision of syncronizing my work calender with the zen ... and now its just not possible ! unless my boss wants to give me a new laptop.. and i dont think that will happen . hehe
Well i will keep on working on this issue.. ill let you know guys.

Zen Micro - firmware update failed so now "dead"

I have a firmware problem with my Zen Micro. Can anyone help?
The series of actions I have taken so far are these:
I got my Micro in January 2006. I now want to run Audible software to listen to their books so I downloaded the firmware update L6_2_2_02.exe from the Creative support site which is stated as providing the Audible?facility.
I backed up the Micro contents using Creative MeadiaSource Organiser. I then ran the firmware update from my Win XP PC. This started OK and I got a series of messages about what was happening. Then it stopped with the progress indicator bars about 2/3 across. I left it for half an hour and nothing changed so clicked to stop the update.
I checked the firmware version on the Micro and it said 2.2.02. The update?looked OK and the FM worked but of course I had no music content.
I opened my Creative MeadiaSource Organiser (v 3.0.09) but it said no device is connected so I was unable to reload the music. My XP PC recognised the Micro as connected and I checked Device Manager which showed the "device is working properly". I was also able to synch music to the Micro using Windows Media Player and this played OK. I tried another computer and could also synch using Windows Media Player but I wanted to reload my music from the backup.
I looked on the Creative site for the steps to take when a firmware update fails. The Zen Micro is not on the list as supporting the MP3 Player Recovery Tool so I did not use that. I followed the Reload Failure recovery instructions and ran Clean UP, then Format All, but this did not fix it so I ran Reload Firmware on the Micro. This was a big mistake!
Now when I try to run the firmware update from my Win XP PC, I select English then I get the message "Your player is not connected, please connect your player". I checked again and XP still recognises the Micro and the device is working. It is no longer recognised by Windows Media Player but just? appears to XP as an empty storage device.
The Micro now shows the firmware as v 0.0.65, but now it is stuck in Recovery Mode. I have contacted Creative Support but their reply is that this player is now over 3 years old, reached its end of service life, so there is no support other than on their web site. Following their web site recovery instructions got me into this mess so I guess?no extra help is offered from Creative.
The player is now essentially dead. Unless there is some way to get the firmware update program to recognise the device as connected, then I don't know how to fix this. This is a shame as it is a nice little player for my music collection.
Can anyone help as I don't know what to do next?

I have the same problem. I put the screenshots below and the errors that happen to me.I can not put him the firmware because I do not recognize the device.
Both windows xp windows 7 as the
DISPOSITIVO, IMAGEN ACTUAL
http://img528.imageshack.us/img528/3783/dsc0025mv.jpg
EL PORTATIL LO RECONOCE
http://img811.imageshack.us/img811/4323/dsc0026ox.jpg
MUESTRA BATERIA, PULSANDO BOTON DERECHO
http://img546.imageshack.us/img546/4855/dsc0027wj.jpg
ADMINISTRADOR DE DISPOSITIVOS
http://img801.imageshack.us/img801/4501/dsc0028une.jpg
ERROR AL INSTALAR CREATIVE SOURCE
http://img805.imageshack.us/img805/3061/dsc0029io.jpg
http://img208.imageshack.us/img208/9330/dsc0031sn.jpg
http://img545.imageshack.us/img545/7096/dsc0032qg.jpg
MP3 PLAYER RECOVERY TOOL, no me reconoce Creative ZEN MICRO como conectado
http://img528.imageshack.us/img528/1714/dsc0030qn.jpg
PROGRAMAS DESCARGADOS (pagina oficial creative)
http://img341.imageshack.us/img341/2466/dsc0033oi.jpg
DSC_0025.jpg
I need your help. I'm desperate. Uninstall Windows Media Player.
Thanks in advance

Zen micro photo won't start & not detected anym

hello!?my zen micro photo started acting weirdly lately: even when the player's battery was fully charged, the player would shut itself down automatically a second or two after being turned on. i managed to access the recovery options and do a cleanup, but the problem was not solved. after, it started telling me that the battery was empty even after being charged for hours on my computer. (and the battery is only a year old or so). then?a few hours later, it even failed to turn on at all, and has stayed like that since. i could at least access the recovery console, so i tried formatting the dri've, but there was no improvement. i then tried to use the recovery utility found on your website, which updated the firmware to version 2.3 however, there was no difference, and the player still doesn't work. finally, my computer won't even detect the player anymore (although i have made no changes to the computer's configuration), and it won't even charge it, since it is not detected. (the player doesn't show any sign when it is plugged) so now, all i can get from the mp3 player is a "low battery" warning, and only when i try to access the recovery console (otherwise, nothing happens). any ideas?thank you !

just an update:i tried the "caveman repair method" (http://forums.creative.com/creativel...cending&page=3)and it ... worked... partially...at least the player now boots, although only to display a low battery warning...BUT as soon as i plug it to my computer, it crashesand i already tried the rear usb ports, no better, as well as 3 different computers, no improvment neithersooooo... anything else?maybe roasting it next time would help lol

Creative Zen Micro(Original) Firmwar

Alright, well I've had this product for about 2-3 years now. It's worked until this point, I wanted to erase everything off of it. So I went into recovery mode. I accidently select reload firmware and now it's messed up. I've been looking around trying to download the firmware and putting it on there again. But, I open up the firmware upgrade. All it gives me "Your player is not connected, please connect your player". It is connected, just charging. I lost my cd. Don't know how to connect the player to my computer. Help?

PhoniexBoy wrote:
The same thing happened to me, except my songs were starting to mess up and so went to the Creative thing for the Zen and reformatted my Zen micro photo 8 g. Well after that the zen froze up at the Creative logo, so i tried formatting again from the recovery menu, and it didnt do anything, after that I realized i hadnt updated my firmware since i got in in like 2006, and that may be the problem. If you know of anything to help, your kindness would be gratefully appreciated.
Does your computer recognize the player? Have you got it to go beyond the Creative screen. Did you do cleanup >reboot after formatting player. If not then do that. Don't even think about firmware update until the computer will recognize it. Firmware update for the player can ONLY be done a computer running Xp with WMP0. Your hardri've may be failing so firmware update won't help that. If the player won't finish the scan disk & rebuilding library after the cleanup >reboot then it's a clear sign of failing or failed hardri've.

My Zen Micro Photo 8gb has gone m

Hi all,?My Creative Zen micro Photo 8gb has gone a bit mad. It had a firmware update, and then wouldn't work. SO I hooked it up to the PC and nothing was happeneing. It tried to rebuild the library, but froze. So I followed tech suppourt, and formatted it, and lost all my music, and it wont do anything now. It gets to the Recovery Mde Screen, and does the following:?Clean Up: - Says it's cleaning up, but does nothing really. Format All: - Says formatting, and does so. Reload Firmware: NOW, here's the interesting one, I hook it up to download the firmware... AND the PC recognises it's plugged in, but the firmware application doesn't. Reboot: - Reboots straight into Recovery mode again!?Very frustrating. Can anyone help?Cheers

Mine too! It completely froze to Recovery mode, I can't even turn it off! I had to take off the batteries and when I open it, it's stuck in there. I had it replaced by Creative Labs. Btw, I commend their tech support. The email support is fast and very responsi've. A RMA was issued to me and they were able to replace it in a matter of days. Then my 2nd player (refurbished one,what I got back) was working for 7 days when it froze again. then it says rebuilding library or something..but it won't finish loading. It was stuck to that page, cannot turn off, had to take off batteries again. I did this 5 times, since it failed to reload the library. Afterwards, it displayed Hardware Failure.
Now, I'm currently waiting for their email feedback since I reported the problem again.
My advice, let them know. Hope you can work yours out.

Need help with Zen Micro Photo: It stays in recovery m

Just recently, my zen micro photo has been staying in recovery mode. I have tried all of the four options available? to me in recovery mode. .) Clean up 2.) Formatt All 3.) Reload Firmware? 4.) Reboot. When I try "Reload Firmware". It doesn't really "reload". All it does is erase the current firmware, which it has done several times. My computer doesn't really realize the player. It doesn't allow me to acess my songs, which have already been deleted. It says the "Player is not connected". At first, I thought I needed to charge. I charged it to maximmum. The battery is "FULL". Also, the firmware update doesn't recognize the player either. Whenever I select the reboot option, my player reboots to recovery mode. This does no good, as I have tried all of the available options in recovery mode, and they have done no good. Your help would be greatly appreciated. Thank you.Message Edited by Damaniscool on 04-2-200707:29 PM

do you hear a sound from the hard dri've like it's stuck? this is common. if so, please search this forum for "hard dri've whack" or "percussi've repair".

Suggestion: ZEN Micro Photo: Album art when playing tra

I was kinda hoping that you could display album art whilst playing tracks on the ZEN Photo. If you can, I can't figure it out, nor is it mentioned in the brief manual.
Please consider this as a suggestion to include the feature in the next firmware update. I also think it would be cool to be able to display a slide show durring audio playback. You could create presentations for the road or simply display slides in MTV fashion that go along with the tunes.
What do ya think?

* I've seen some comments on the screen being dim (or not as bright as expected). Can anybody confirm or debunk?
I set the screen contrast to 80 percent. In normal office lighting, pictures appear crisp and bright enough. In total darkness, looking at the screen won't hurt my eyes either. OLED rocks!
* I've read reports about no music while viewing pictures. True or False?
Unfortunately this is true.
* Anybody using SUBSCRIPTION music on their Micro Photo If you are, can you see album art while a track is playing (like the Apple nano)?
Unfortunately again, album art is not displayed.
Overall I'm very happy with Zen Micro Photo. The only complain is that the radio is mediocre at best.

Zen Micro PlaysForSure firmware Help

I have Zen Micro with firmware .0.03 and I want to upgrade it, but I don't know which firmware I have to choose
May I choose firmware PlaysForSure 2.00.2e or firmware .02.05 ? Which is better? Or maybe I shouldn't upgrade my Zen and stay with .0.03 (it's stable)
And one more question: The PlaysForSure 2.00.2e firmware is stable and with no problems with it's?
pzdr
m4t30

m4t30 wrote:
but I still haven't answer for: WHY I have to use wmp 0? Only for listening music or maybe for transffering music to Zen?
And still how can I downgrade firmware?
. With the 2.xx.xx firmware it needs WMP 0 for the built in MTP, music management and DRM functionality that is enabled under the 2.xx.xx firmware. You also need XP because WMP0 is not supported under anything else.
2. If you have a .xx.xx firmware version on the player and are under Windows 2000 or anything other than XP the unit CAN NOT be upgraded to a 2.xx.xx firmware. The update will fail or quit if you attempt to update to a 2.xx.xx firmware on anything but XP. If you already have a 2.xx.xx firmware on the player it will nolonger be recognized on a Win2000 or less system. It is only useable on a an XP system at that point.
3. Once you have upgraded to the .02.05 firmware or the 2.xx.xx firmware you can only go back and forth between those two versions ( As long as you are on XP )

Creative Zen Micro Photo Problem (Detecti

BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
HERE IS THE PROBLEM:
YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
Eric

ZEN MICRO PHOTO USB DEVICE NOT RECOGNI

help !! i am also having a problem similar to your and just about everyone elses on here. I just purchased a zen microphoto for xmas a month ago and it has been a nightmare . it has worked for about a month perfectly then it ceased to be recognized by? my Alienware area 5 desktop system which previously recognized it fine. I took all of the steps and scanned all of the forums then realized that after uninstalling my windows media player and rolling back to 0 it began to be recognized again. well then surprisingly and maybe not so much so after looking at so many of the post of these forums. Well I have taken so many steps to try to get my ZEN MICRO PHOTO to once again become recognized by my computer? and yet again all efforts have been fruitless. I reformated my ZEN MICROPHOTO?and now when i plug it in a small window pops up at the bottom stating that the USB DEVICE IS NOT RECOGNIZED . I then cannot upload new firmware and can in fact do absolutely nothing but gaze at the player which boots up then fades to black while my pc sees my player as an unknown usb device. I even reformated the pc for the sake of the player , cutting off the nose despite the face in other words and still no dice. I have windows xp service pack 2 , all updates and bios up to date. My pc is only 2 years old and have a lexmark printer? a mouse and a keyboard attched to it , none of which create conflict. Even after reformatting my pc i made sure my player was one of the first peripherial devices connected and all to no avail. I think this is a disgrace that such a compnay as CREATIVE cannot put foward a quality product. Does anyone out there have any solid suggestions on how to fix this proiblem if so they would be gretaly apprecaited. ThanksEdward

vacantmind: You might also want to make sure that you get the latest drivers and software as follows:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
Install . then connect the player to the PC. Then install 2. and 3. (the player must be connected for 2. to verify you have a Creative product).
Also an important test is to install the drivers and software on another PC, say a friend's, and see whether you have the problem. If you don't, then the issue is with your PC, or a compatibility issue with the player. If you do, then there's something wrong with the cable or player.

Zen Micro Photo Firmware 'Update Fail

Similar Messages

Maybe you are looking for