Zen Micro Photo "Hardware Problem&qu

I have a Zen Micro Photo purchased back in Christmas of 2006, and now when I boot it up, an error comes up saying that there is a "Hardware Problem." I am not able to do anything when this message appears, so I tried to safe boot it by holding the power switch while inserting the battery. This has not worked, and because the MP3 player is not recognized when it is plugged in to my computer, I can not run the troubleshooting software.
I have emailed customer support and since it is out of warranty, they cannot do anything and recommended that I try here next. Has this happened to anyone before?

"Hardware Problem" on the Zen Micro series of players is generally indicati've of a disk problem (usually a crash.) Some people replace the disk dri'ves on the Micro themselves. Others have found that since the dri've uses a Compact Flash interface, they can install a CF card, up to 32GB, in lieu of a disk dri've to transform the player to a much higher capacity player using flash memory that will not be as vulnerable to damage as a disk dri've.

Similar Messages

  • Zen micro photo download problems with Virgin digital music c

    I'm new to all this and got my first Zen microphoto for fathers day (UK). The player worked fine for about three days.
    Then, when I was downloading about thirty tracks, I got an 'unknown error' message. From that point on the player would not accept any downloads. I re-loaded the firmware as advised by creative but it would only ever accept one track at a time which is useless. I got fed up and returned it to the shop for a replacement.
    I have had the second one for about two weeks and exactly the same thing has happened! Do any of you wise people have some advice before I throw the player or possibly myself out of the window.
    Life is too short to waste this much time.
    thanks in advance
    for the technos, I have WXP and WMP0 which seems to be the perfect configuration?

    Snoweagle wrote:
    Just copy n paste, no software required.
    If you have WMP 0. Otherwise, make sure that you have MediaSource (although I prefer Zen MicroPhoto Media Explorer, both of these come on the CD that came with your device).

  • Creative Zen Micro Photo Problem (Detecti

    BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
    HERE IS THE PROBLEM:
    YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

    I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
    I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
    If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
    Eric

  • Having big problems with Creative Zen Micro Photo!! I need much urgent help!

    Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
    I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

    Might try this:? http://forums.creative.com/creativel...mp=true#M95059

  • Zen Micro Photo problem

    Hey, everyone. The problem is My Zen Micro Photo seems to automatically lock itself on and off constantly. The lock symbols keeps flashing in the top right hand corner. This?happens when it isn't actually switched to lock and when i'm trying to turn the volume up or down. Sometimes when I'm trying to switch it off it happens aswell. Anyone else have this problem? And can anyone help?

    Bump.

  • Zen Micro Photo Problems- Please He

    Hi all, I have enjoyed my zen micro photo for the past year with relati'vely little problem, but recently when i plug the zen in, it won't light up nor charge and seems like the computer didn't even know it's plugged in. Another serious problem is that if i do get it to charge, after i remove the zen from the computer, it won't turn back on! and it also keeps shutting down by itself if the heaven was merciful that day and the zen managed to turn on. Any solutions? Please help me!

    what error message to you get, does the micro think its detected, is it charging and all that. that firmware will let the computer detect the player in the same way as your old one.
    have u looked in device manager to see if its a problem device?
    basic suggestion try to work out where the problem lies, test it on another usb cable, another usb port another computer. try and find out where the problem lies, then its easier to help.
    regards olly

  • Problems with Zen Micro Photo being recognized

    I have a Zen Micro Photo 8 GB player, which I have had for a couple of years, and have had no problems. I recently purchased a new computer, and have Windows XP Professional Service Pack 3. I have installed the Creative Zen software from the supplied CD, and when I plug in the player and turn the player on, and open Zen Micro Photo Media Explorer, it says "Your player is not connected. Please connect your Zen MicroPhoto to your computer."? The player has firmware .20.0. The player plays well - ... Any suggestions?

    amgpls wrote:
    Thanks. In addition to the OS and firmware I noted, I have Windows Media Player 0 installed on the computer.
    Did that help you to get the player recognized?

  • Zen Micro Photo Recovery Mode Problem !! Help needed plea

    I just purchased a white zen micro photo last week. As I was putting music onto my ZMP, my computer ( Dell Windows XP ) froze. I disconnected my player and when I went to turn on my ZMP, I found out that it went into Recovery Mode. I tried all the possible ways that it listed to do.
    Clean Up (when I pressed that one, nothing happened .. the screen didn't even change)</LI>
    Format All (When I pressed that one, the screen seemed to .. freeze .. but it had a smear of lines .. ?)</LI>
    Reload Firmware (I never had firmware on my ZMP to begin with)</LI>
    Reboot (It turned off and It turned back on like it's supposed to but when it turned back on, it was in recovery mode again)</LI>
    My ZMP does not even turn off. This is wasting the battery so please help me. I have emailed Creative but they have not replyed yet.
    <FONT size=7>PLEASE HELP !

    imsooopawoman wrote:
    Reload Firmware (I never had firmware on my ZMP to begin with)</LI>
    You must have had firmware on there if it worked, but "reload firmware" actually erases the firmware. It's a badly named function.
    Unfortunately though you've tried all you can as a user. The player sounds faulty and you ought to contact Creative support for a replacement.

  • Creative Zen Micro Photo 8GB Driver Problem XP USB

    Xp couldnt find driver to install for Creative Zen micro photo 8gb. I have P4 Xp sp2 USB .. It works fine with other.
    But when i connect zen Micro Photo 8GB it says "Unknow device creative zen micro photo" the player doesnt come with any driver.
    can you Please help me?
    Is it something to do with firmware?

    anant wrote:
    Hi ted, can you tell me What is MTP device n wht its connection with WM0?please.. It will be a great help! ?
    MTP is a protocol. For our purposes it means that the driver should be included with WMP0. (...and that is the connection, you get the driver by installing WMP0.)

  • Zen Micro Photo: PC doesn't detect dev

    I just bought two Zen Micro Photos. On my PC, I downloaded the latest driver without installing any of the software that comes with the device. I plugged it into my PC, and it detected it immediately. No problems.
    On my wife's PC, I downloaded the latest driver and installed all of the software. The PC will recognize that a USB 2.0 device has been plugged in, but it will not recognize it as an MP3 player. I have searched these forums and tried various suggestions (like pointing the New Hardware wizard to C:\Program Files\Creative\Jukebox 3 Drivers), but everything turns out the same: the PC cannot install the hardware.
    I plugged her Micro into my PC and it works as expected.
    When plugged in, her Micro does *not* show the docked screen.
    Both PCs are Windows XP SP2.
    Can anyone help?

    Nevermind, I found where to figure that out. Looks like her PC doesn' t have SP2.
    I'm downloading it now, and I'll be back if I run into any more issues.
    Thanks for pointing me in the right direction.

  • My Zen Micro Photo 8gb has gone m

    Hi all,?My Creative Zen micro Photo 8gb has gone a bit mad. It had a firmware update, and then wouldn't work. SO I hooked it up to the PC and nothing was happeneing. It tried to rebuild the library, but froze. So I followed tech suppourt, and formatted it, and lost all my music, and it wont do anything now. It gets to the Recovery Mde Screen, and does the following:?Clean Up: - Says it's cleaning up, but does nothing really. Format All: - Says formatting, and does so. Reload Firmware: NOW, here's the interesting one, I hook it up to download the firmware... AND the PC recognises it's plugged in, but the firmware application doesn't. Reboot: - Reboots straight into Recovery mode again!?Very frustrating. Can anyone help?Cheers

    Mine too! It completely froze to Recovery mode, I can't even turn it off! I had to take off the batteries and when I open it, it's stuck in there. I had it replaced by Creative Labs. Btw, I commend their tech support. The email support is fast and very responsi've. A RMA was issued to me and they were able to replace it in a matter of days. Then my 2nd player (refurbished one,what I got back) was working for 7 days when it froze again. then it says rebuilding library or something..but it won't finish loading. It was stuck to that page, cannot turn off, had to take off batteries again. I did this 5 times, since it failed to reload the library. Afterwards, it displayed Hardware Failure.
    Now, I'm currently waiting for their email feedback since I reported the problem again.
    My advice, let them know. Hope you can work yours out.

  • Help with my Bran-New Creative Zen Micro Photo. [Questi

    <EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
    My Specifications:
    My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

    Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

  • [Zen Micro Photo] Stuck in b

    My Zen Micro Photo gets stuck in the bootscreen. When I turn my Zen on it says "Creative" and after a couple of seconds "Zen Micro Photo". While "Zen Micro Photo" is in my screen it does nothing. I tried to take out the battery and turn it on again, but still nothing. Only after a couple of hours it starts working again.
    It als doesn't connect properly with Windows XP.
    The problem started a couple of days ago when I activated the removable harddri've mode on the Zen to connect it to Windows 2000.
    Should a reload of the firmware help?

    See the section "My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?" in the FAQ.

  • SOLUTION - Zen Micro Photo Stuck in Recovery M

    My Zen Micro Photo got stuck in recovery mode after I followed Creative Labs Technical Support suggestions. They had me do a Clean Up, a Format All a Reload Firmware and a Reboot. After doing this my unit was stuck in Recovery Mode. They then had me load the latest firmware. v .3.0, from a PC connection and I found that it worked fine, but doing the above steps put me back into Recovery Mode hell. So I did some testing.
    I loaded firmware version .20.0 from my PC thinking the problem might be in the firmware version. Doing the steps they had asked me to do caused me to be in Recovery Mode Hell, so again I loaded firmware from my PC.
    This time I went through each item one at a time and rebooted after each. Clean Up/Reboot, Format ALL/Reboot and Reload Firmware/Reboot. They all booted normally except when I did a Reload Firmware.
    Next I loaded firmware v .3.0 to my unit again and did the same test. Again it put me in Recovery Mode Hell after I selected Reload Firmware from the Recovery Mode screen.
    Conclusion DO NOT LOAD FIRMWARE FROM RECOVERY MODE. If you have to load firmware at all, do it from your PC connection. I'm going to copy this into the VERY LONG message I have had with Creative Labs Technical Support over the past 5 days and let them know what I have found. I hope this helps others to fix their Micro Photo.

    I am having a similar problem. I am stuck in recovery mode and my PC won't recognize the MP3 player at all? I have rebooted, cleaned up, formatted, pulled the batt, etc. Finally I pulled the battery for longer than 30 seconds and that seemed to fix the problem. We will see.
    JW
    ECIT: oh ya, I am using a microphoto as well.Message Edited by Jfawkingdub on 06-29-200703:2 PM

  • Zen Micro Photo bugs need to be worked out - firmware update comi

    Hi,
    I've had my Zen Micro Photo 8gb for a month & have discovered some interesting quirks: first, I don't believe mine is defecti've, though I've had problems. I have encountered freezing on both the "Zen Microphoto" logo and "rebuilding library" screen; I scoured this forum and the Knowledge Base for answers, trying all that seemed applicable?- I tried disk cleanup and reboot (leading to rebuilding library freezes), reformats & carefully reloading the latest firmware?a couple of times. I've drawn some conclusions:?) Mediasource software is not working for me; when I switched to using only Windows Media , most problems went away.2) For whatever reason, "rebuilding library" can only be accomplished while my Zen is connected to the computer - should this be the case?3) It seems like the times my screen freezes on the "Zen Microphoto" logo I may have held the "on" switch to the side a little longer than necessary; I'm wondering if this is happening because I'm holding the switch on a little too long?Anyway, I love the size, look and sound of this player, so I hope to keep using it. NOTE: can anyone from CREATIVE tell me if there will be future firmware updates? Thanks
    !!! Steve M.Message Edited by smills on 08-0-20070:24 AM

    I run windows XP pro . sp2, its quite strange.. it should work. ! **bleep** IT SHOULD WORK ! :smileyindifferent: , and the wirld thing is. i also try'ed it on another windows XP machine at work.. and it didient work there either. im beginning to question if this is the product for me. its realy sad though, i love the zen design.. not to mention the price.
    It realy realy bugs me that the zen micro photo isset supportet on windows 2000, i had this vision of syncronizing my work calender with the zen ... and now its just not possible ! unless my boss wants to give me a new laptop.. and i dont think that will happen . hehe
    Well i will keep on working on this issue.. ill let you know guys.

Maybe you are looking for