Zen Micro Photo Low Battery Warning With Fully Charged Batt

I have two of these players and both batteries work fine and indicate fully charged in one of the players. Neither battery works in the other player. No power at all with either of them. If I connect the player to a computer all I get is the creative splash screen followed by the Low Battery Warning with the yeild sign, nothing else. If I turn the player off then it reverts to no power at all. What is going on, anybody know?
Thanks

What was the resolution. I am having the exact problem.

Similar Messages

Zen Micro Photo USB & Battery quest

I bought a zen micro when they first came out about 2-3 years ago. Well the dreaded headphone jack issue has finally gotten to me. So I just bought a zen micro photo. Was on sale here for $00 so I figured y not buy it! My question is this:?) the usb cable that comes with the photo is alot shorter than the regualr zen micro. Can I use the regular zen micros usb cable to transfer songs?2) I have 2 batteries for the regular micro. Would those work with the photo??

Hi,
Yes, they both have the same mini USB connection so the cable is the same type.
As far as the battery goes, it would work, but the Zen Micro battery is not as powerful so the battery life will not be as long.
Cat

Pick up metal objects with zen micro headphones? battery life with firmware 1.02

hey all
just purchased my zen micro couple days ago.
the package we got here in downunder is satifying. included were the wired remote and also the stand/case with belt clip. these were the only reasons that made me choose this over the ipod mini.
this has not occurred to me until tonight, but the headphones seems to act as magnets and were stuck to each other as the phones were dangling
i never noticed this happening with other phones
also the battery life of my zen was horrendous. its lasted 5 hrs with eq and smart volume on. the zen was on hold the whole time as the actions were controlled by the wired remote.
this was with the firmware that was shipped with the player .0.03 i believe
have just updated the firmware now, and will be testing the battery life to see if the problem is rectified.
if not, then an exhange for an ipod is inevitable.

Yep, SV is a battery killer, around a 50% drop in life has been meaured and the effect is known to be pretty negligible.
And as others have said, them headphones have magnets in, like pretty much any speaker

Please wait. Very Low battery warning but wont charge

I have a message with a greyed out screen saying "Please Wait. Very Low Battery" but the ipod will not charge.
Any suggestions?

You're sure the cable is working as well, are you? (I have a cable that has a torn plastic sleeve and now the inner wires are showing. It won't be long before it fails to work.)
Have you tried another cable, perhaps try someone else's cable and they try yours? Also, have you tried the reset procedure? Hold the Menu and Select (centre) buttons down for at least ten seconds to see if the iPod re-starts.

Ipod touch stuck at "low battery screen" when fully charged? help please

ok before i go into any detale here its not low battery and im refusing to recharge it. ok i have had my ipod touch 3 1/2 months, and about 3 weeks after my update to the 2.0 software, since a few days ago it has randomly gone to the low battery please recharge screen even if it was on full battery, i would have it playing music then when i would be finnished i would put it into sleep for around an hour (wifi, fetch and location services off) and when i come back to it it is stuck at the scrren with the low battery with the tiny red bit flashing. it also happens when i turn it off completely and when i did charge it i left it charging for around 3 hours just to be sure and still the same, usually after 30 mins of constantly turning it off and on again i would see the apple logo and it will start fine saying it has full battery ect... i would try and restore or something but when its in the strange mode
ANY help wouyld be really appriciated
thanks

it sound like you may need a new battery if its not holding charge .

My zen micro photo won`t charge with anything else but my usb port h

i bought a charging package for my creative labs zen micro photo. when i use the wall charger or the car charger, it shows it is charging but the battery icon on the micro photo does not does not fill up. i leave it on?for hours but that does not help.i bought this charging pack from ebay and it says it is mead for the micro photo.any thoughts. thank you

this was an after market package it only cost me $4 and would cost me close to that much to send it back. i guess i will buy the one you got at creative labs. you said it works with your zen micro photo?would you send me the model number of the wall charger. thank you so much

Cheap/free DIY Zen Micro/Photo Case and wall charg

Ahoy! I've been on the Head-Fi forums and figured to check out these and didnt find much.
Its simple to make a hardcase for your Zen Micro or Micro Photo, check out mine!
I used a penguins mint tin, (like Altoids but caffinated)
also, the standard wall charger for USB motorola phones will charge your Zen Micro Photo
its still a 5v usb charger, it works and you can find them cheaper than one from
creative
<img border="0" alt="My DIY Case" src="http://img.photobucket.com/albums/v627/Fev3r/Zen/DSCN087Small.jpg">
[url="http://photobucket.com/"><img border="0" alt="My DIY Case" src="http://img.photobucket.com/albums/v627/Fev3r/Zen/DSCN086Small.jpg">[/url]
[url="http://photobucket.com/"><img border="0" alt="My DIY Case" src="http://img.photobucket.com/albums/v627/Fev3r/Zen/DSCN9986Small.jpg">[/url]
This was very easy to do.
Take the mint tin, trace it onto the back of a peice of foam (the white plasticy side)
cut slightly inside the line, about /3 a centimeter.
measure the height of the tin and take about /5 to /4 of a cm off of that and cut straight down the long edge of the foam, its an exact fit (if you want it fitted like mine)
you will need TWO of these, its double layered
Check the fit of the peice before you place anything.
i placed the sides first but do whatever you find easiest.
fold the long peices in half to find the center and just start applying from the bottom of the tin.
next, cut a peice big enough to cover your screen but not the buttons.
take the sticky side off and lay the foam, sticky side up, onto the screen. close the tin.
Your MOST of the way done
now take a dremel (what i used) or what ever else. maybe a nail and hammer the corners and scisor the between? (that may be sharp)
and you have yoruself a great case everyone will marvel at and youll be proud of it, post your pics here or atleast email me at [email protected]
(edited for grammer and aded images and title)Message Edited by HalfTwitch on 0-06-20072:59 AM

I deal with the slight buzzing while the screen is on, i just haev my screen cut off in 0sec of idle and its good to go, thats a known bug.
Also, one time my zen kinda froze booting but that was a fluke adn has been fine since then.
I Love my hard case i made, it has a mysterious ding in it but that just means that i spared my zen from that same ding.
I've been IM'd and asked abotu it overheating in the enclosure and i've used it in the sun for hours on end and the zen itself stays cool, i dont think there is a problem with that at all.
If you rmaking one know that its one layer of foam on the bottom and two on the sides.
the easiest way to apply the screen protector is to peel the sticky off of lay it on the screen, sticky side up and then just close the lid.
I had the idea of putting a hole in the lid where the screen is and glueing the clear plastic from a CD case but scrapped that idea because it would look tacky and get dirty.

Help with my Bran-New Creative Zen Micro Photo. [Questi

<EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Having big problems with Creative Zen Micro Photo!! I need much urgent help!

Hi. I am having a big problem with my MP3 Creative Zen Micro Photo device at the computer.Here is the thing:Before I bought this I had the regular Zen Micro & having fun with it. I had no problems with that when I used the Media Explorer to transfer songs. So I bought the Zen Micro Photo & installed it my computer. As normal I used the Media Explorer to transfer songs & pictures.So I reinstalled Windows XP at my computer, and when I installed the CD that followed to transfer new songs, the Windows said that it's an unknown thing I have connected in the USB.So I installed Service Pack & 2. I have tried to install drivers from the cd but it seems that there are no drivers on the cd! The big problem is that when I connect the MP3 to the computer, it doesn't read it's a Zen Micro, it's just unknown! So the Zen Micro Photo Media Explorer program doesn't work & I can't transfer songs or picture on it! And it just happened after I re-installed Windows on my computer. The same thing happened on my brother's computer after he re-installed windows. And when I connect the MP3 to the USB, it says that it's not a USB 2.0, but .! And I am sure it is 2.0 because it has always been like that before I re-installed windows. Also the MP3 does not re-charge when I put it my computer! The battery is just the same, it tries to do it but it doesn't. So I am using my sisters computer to charge the MP3 & transfer songs. I have tried everything but I can't seem to understand what the problem is? I have never experienced something like this before, and I really hope you can help me with this! To be honest I think what I am missing is the driver. So can someone PLEASE provide me the link for the driver? I have downloaded all those 3 on www.creative.com, but they are none of them! Also that playforsure firmawre thingy does not work because it sais that I have to connect my MP3, and it is connected already!Please reply as quick as possible! Thanks a lot for you kind help!
I have also sent this mail to creative support! But please help me I have had this problem for almost 2 months now! =(Message Edited by anakwalajinn on 05-0-2006 08:47 PM

Might try this:? http://forums.creative.com/creativel...mp=true#M95059

Zen Micro Photo Battery? Where to

Hey guys. I'm a bit confused now because I can't find an original Zen Micro Photo battery in germany. It seems like it isn*t released till now. Now I would like to if and if yes when it will be released in germany. It can*t just be true that creative wants us to use the old zen micro battery which is weaker.

Why wouldn't they take responsibility? Read through the forums, you're not the first one with battery problems. I'd say try a new battery if you can, otherwise send Creative Support an email about the problem. You'll probably have to send in your player and will get a replacement.

Zen Micro Photo battery l

Creative states that the battery life on the Zen Micro Photo should be about 5 hours per charge. I have a new player and am finding the battery life per charge to be no where near that. Is this because I constantly move the volume up and down and shut down and power up about twice a day? Once that battery icon is down to about a third full I recharge. I would say my battery would go about 8-0 hours on a charge if I let it lay out until it dies. I have no EQ and smart volume settings on, the screen is set to 5 sec backlight.
THe first time I charged the player i didnt realize that the USB cable was only half way in , I was afraid to force it and did not realize I had to push hard to the the USB cable all the way in. The next morning the batteyr was only half charged because the cable was only in half way. when i finally realized that it was not in all the way i pused harder and it connected all the way in then charged compeltey in a couple of hours. would this effect the life of my battery per charge?
thank you

ProKakashi wrote:
hi all i also got a zen microphoto (which i like), but its batt life is getting worse. its almost a yr old. how long do u guys charge it's i charge it when im uploading mp3, after that i disconnect it and use.. izzit because of this that the batt lifespan is becoming shorter? thx.
It takes around fi've hours to FULLY charge the battery. It willcharge to 70% capacity rather quickly but takes a while to fully charge...
Ply

Zen micro photo 4Gb 1hr battery h

My Zen micro photo 4Gb is only giving Hr battery life from full charge also from fully charged it will discharge in the player after about 3-4 hrs.
I suspected a duff battery and purchased a new (not creative) one but the problem persisted , i have upgraded the firmware?
both batteries hold a full charge out of the player.
any ideas ?

andriy242 wrote:
ok..but what if I can't install service pack 2?
Why couldn't you? If you're having trouble installing SP2, you should get Microsoft to assist you.
Jason

Need help with Zen Micro Photo: It stays in recovery m

Just recently, my zen micro photo has been staying in recovery mode. I have tried all of the four options available? to me in recovery mode. .) Clean up 2.) Formatt All 3.) Reload Firmware? 4.) Reboot. When I try "Reload Firmware". It doesn't really "reload". All it does is erase the current firmware, which it has done several times. My computer doesn't really realize the player. It doesn't allow me to acess my songs, which have already been deleted. It says the "Player is not connected". At first, I thought I needed to charge. I charged it to maximmum. The battery is "FULL". Also, the firmware update doesn't recognize the player either. Whenever I select the reboot option, my player reboots to recovery mode. This does no good, as I have tried all of the available options in recovery mode, and they have done no good. Your help would be greatly appreciated. Thank you.Message Edited by Damaniscool on 04-2-200707:29 PM

do you hear a sound from the hard dri've like it's stuck? this is common. if so, please search this forum for "hard dri've whack" or "percussi've repair".

Using Zen Micro(Photo) with plain Explo

Is there a possibility to copy MP3 files simply by drag-and-drop with the Windows Explorer to the Zen Micro(Photo) so that the files are treated as MP3 and NOT as simple data files? Technically it is quiet simple to do this by using the hard disk of the Zen as an extra hard disk in Windows. Even the cheapest USB-stick based MP3-player can do this. Why not a Zen (or the iPod competition)?
I refuse to use any specific software to copy my self ripped MP3-files because I know that that software (Creative, iTunes, even Windows Media Player and other) changes things during the file transfer and I don't want any change in the MP3 files, not even a single bit!
I want to buy a Zen Micro Photo (8 GB, color screen), but I refuse to do it as long as it is impossible to crag-and-drop my MP3 files simply thru the Windows Explorer.

Yeah that's what i always did. I just drag and drop MP3 files directly into my player without using any software whatsoever.

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Zen Micro Photo Low Battery Warning With Fully Charged Batt

Similar Messages

Maybe you are looking for