Zen micro photo won't start & not detected anym

hello!?my zen micro photo started acting weirdly lately: even when the player's battery was fully charged, the player would shut itself down automatically a second or two after being turned on. i managed to access the recovery options and do a cleanup, but the problem was not solved. after, it started telling me that the battery was empty even after being charged for hours on my computer. (and the battery is only a year old or so). then?a few hours later, it even failed to turn on at all, and has stayed like that since. i could at least access the recovery console, so i tried formatting the dri've, but there was no improvement. i then tried to use the recovery utility found on your website, which updated the firmware to version 2.3 however, there was no difference, and the player still doesn't work. finally, my computer won't even detect the player anymore (although i have made no changes to the computer's configuration), and it won't even charge it, since it is not detected. (the player doesn't show any sign when it is plugged) so now, all i can get from the mp3 player is a "low battery" warning, and only when i try to access the recovery console (otherwise, nothing happens). any ideas?thank you !

just an update:i tried the "caveman repair method" (http://forums.creative.com/creativel...cending&page=3)and it ... worked... partially...at least the player now boots, although only to display a low battery warning...BUT as soon as i plug it to my computer, it crashesand i already tried the rear usb ports, no better, as well as 3 different computers, no improvment neithersooooo... anything else?maybe roasting it next time would help lol

Similar Messages

Zen Micro Photo won't Start

Hi,
I have a Zen Micro Photo and it won't start up. The creative screen comes on and that is it. I have tried getting into the recovery screen by taking the battery out and replacing it while holding the power button on. That works and I can select any option but when I select say format, a screen comes up saying formatting but nothing happens.
I have also tried to push the reset button with a pin but it doesn?t seem to do anything at all.
The item is over 2 months old so I cannot return it under warrantee. I would appreciate any help.

I have tried to down load the latest version of the software (ZENMicroPhoto_PCFW_L6__3_0.exe) from the creative web site but when I run it, it says that the player is not connected even though it is. I have even tried to run?the program?while the player is in recovery mode but still nothing. Is there a way of forcing the computer to see it's

My zen micro photo won`t charge with anything else but my usb port h

i bought a charging package for my creative labs zen micro photo. when i use the wall charger or the car charger, it shows it is charging but the battery icon on the micro photo does not does not fill up. i leave it on?for hours but that does not help.i bought this charging pack from ebay and it says it is mead for the micro photo.any thoughts. thank you

this was an after market package it only cost me $4 and would cost me close to that much to send it back. i guess i will buy the one you got at creative labs. you said it works with your zen micro photo?would you send me the model number of the wall charger. thank you so much

Fix for Zen micro photo freezing at start

This is to confirm what I read on a previous post. My micro photo had frozen at the start up, no keys worked and I had to take the battery out to turn off. I was waiting for an RMA and read on a post that the problem could be solved by lightly striking the unit on hard surface while in the on position, let me say, "THIS DOES WORK AND NO LOSS OF CONTENT!". The hard dri've unit seems to get stuck for different reasons, this can be confirmed by a soft clicking or buzzing coming from the unit while in the stuck position. The striking of the unit must jar the hard dri've back into position with no apparent loss of content. So before you re-format, re-install firmware or send the unit in for repair, try this, it worked for me.

THIS DOES WORK. when i first purchased my zen micro
i had dropped it and when i took out the battery
and put it back in, it froze at the creative screen
after paying fees and getting it fixed, there was
no problems for about a year. today it froze out
of nowhere during a song and once again
had frozen on the creative screen. after reading
this post (and also reading why NOT to do it) i decided
to just try it because i would have to replace it anyway.
so i turn the mp3 on, and lightly banged it on my desk
to my surprise it lit up and the screen said "rebuilding library"
and started playing. SO IT DOES WORK!

Zen Micro Photo won't charge, start, or be recogni

Hello board,
Yes, this is my first post, and yes I came here because I had a problem.
I did read the FAQ and have done a forum search, but didn't find this particular problem, so I hope you all can help...
My ZMP is about 3 months old. Yesterday I left it on and the battery died.
So I plugged it into my computer overnight. This morning it still won't turn on.
Now at work, I've plugged it into this this computer, tried all the different USB ports, removed and reinserted the battery, and basically done every obvious thing possible to get this to charge or even turn on. It will not.
The edge doesn't pulse, and the computer doesn't recognize that its attached.
So, now I'm at a total loss. Is the player busted? Is this an easy fix?
Any help is greatly appreciated!
Thanks,
~Aaron

dropitdancen wrote:Would buying a new battery work? Im not all pro at this so dont take my word for this, correct me if im wrong, but wouldnt buying a new battery help? I mean your at a clean slate for one so nothing should go wrong with the battery part of your player- two im not sure if the battery can actually "die" i've heard that once it dies its dead for good-But that may be a rumor.
Ordinarily the person should be under warranty, so shouldn't have to buy a battery to resolve the issue.

Creative Zen Micro Photo Problem (Detecti

BEFORE I CONTINUE, REFERRING TO THE KNOWLEDGE BASE DOES NOT WORK FOR ME, I TRIED THE STEPS BUT THEY SIMPLY DON'T WORK.
HERE IS THE PROBLEM:
YESTERDAY, I RECEIVED MY ZEN MICRO PHOTO BLACK 8GB in the mail, and was able to get the charging started through my computer after installing the required software (mediasource, media player, wmp 9.5 codec, etc). Before I started the charging, I connected my player's USB cable to the back of my pc. Windows XP w/SP2 prompts that it 'found new hardware.' I go ahead and check in my computer if the player would be able to be accessed. I also confirmed with Creative's mediasource software, and it claims that 'no player was detected.' I did the same in windows media player 0, and says that no hardware was detected. I confirmed to make sure that the USB cable was properly connected, and it was. I tried all the ports and tried other devices through them, and they were able to be successfully detected and used, (i.e; web cam). I don't understand why my creative zen micro photo would not be detected by the software included. Windows is requiring me to install some sought of driver for the player, but I already installed all the required utilities and codecs. I believe it is charging and is detected by windows but not as a removable storage, etc, just 'FOUND NEW HARDWARE', and then no drivers found even through the CD creative provided me. I am also fearing that the battery is taking a long time to charge. This morning I saw that the player was on, but was still charging(I assume). I decided to charge while the player was turned off. Hopefully, now it will be fully charged while the player remains off. I will check when I get home. In the mean time, would some one please assist and respond to me for resolving this situation ASAP for the detection of the player. Thank you very much, Arjun (please do not further me to the knowledge base site as I have already tried all the steps, and no improvement what so what in successfully operating this player. Thank you. Just to add on, I also attempted for a firmware update, and the utility said it was not able to detect the player either, so I wasn't able to even complete a firmware update. Please assist me, URGENT. Thank you.

I sadly am very unhappy with the ZEN Microphoto 8. I was planning on leaving on a trip in the morning and found that suddenly my laptop no longer will recognize my device. I hasve been using the device for several months now with no problems at all, unitl this afternoon. It went into recovery mode and no matter what I tried I could not get it out.
I was finally able to unlock the unit by connecting the unit to my desktop. I was then able to install the firmware update. But now the unit will not work on my laptop at all. All of my media is on my laptop. I have tried several cables to no avail. I am sure that someone is going to mention the suggestion that the device not be used on a laptop, however I find it frustrating that after so much time the unit suddenly does not operate. I tried all of the suggestions in the support section. And it seems truly sad that this might just be due to the cinnection to athe laptop, considering the number of people that now use these as their primary PCs.
If any suggestions can be provided as to the cause of this problem I would love to get it fixed.
Eric

Zen Micro Photo: PC doesn't detect dev

I just bought two Zen Micro Photos. On my PC, I downloaded the latest driver without installing any of the software that comes with the device. I plugged it into my PC, and it detected it immediately. No problems.
On my wife's PC, I downloaded the latest driver and installed all of the software. The PC will recognize that a USB 2.0 device has been plugged in, but it will not recognize it as an MP3 player. I have searched these forums and tried various suggestions (like pointing the New Hardware wizard to C:\Program Files\Creative\Jukebox 3 Drivers), but everything turns out the same: the PC cannot install the hardware.
I plugged her Micro into my PC and it works as expected.
When plugged in, her Micro does *not* show the docked screen.
Both PCs are Windows XP SP2.
Can anyone help?

Nevermind, I found where to figure that out. Looks like her PC doesn' t have SP2.
I'm downloading it now, and I'll be back if I run into any more issues.
Thanks for pointing me in the right direction.

Zen Micro Photo not recognized in Media Explo

Device automatically goes into Recovery Mode when turned on. Tried the clean up and format features, followed by reboot. Still nothing. ?When connected via USB, Device not recognized in Media Explorer. Tried to reload firmware, but getting error message that device is not connected.
Can someone help?

Hey i think i know what your problem is. What Operating System are u running on your computer? (Windows XP, ME etc) And also, if running XP do you have service pack installed? If you dont have service pack installed, you cant use your player. The system requirements can be found on the back of the zen micro photo box. goodluck!!

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

ZEN MICRO PHOTO USB DEVICE NOT RECOGNI

help !! i am also having a problem similar to your and just about everyone elses on here. I just purchased a zen microphoto for xmas a month ago and it has been a nightmare . it has worked for about a month perfectly then it ceased to be recognized by? my Alienware area 5 desktop system which previously recognized it fine. I took all of the steps and scanned all of the forums then realized that after uninstalling my windows media player and rolling back to 0 it began to be recognized again. well then surprisingly and maybe not so much so after looking at so many of the post of these forums. Well I have taken so many steps to try to get my ZEN MICRO PHOTO to once again become recognized by my computer? and yet again all efforts have been fruitless. I reformated my ZEN MICROPHOTO?and now when i plug it in a small window pops up at the bottom stating that the USB DEVICE IS NOT RECOGNIZED . I then cannot upload new firmware and can in fact do absolutely nothing but gaze at the player which boots up then fades to black while my pc sees my player as an unknown usb device. I even reformated the pc for the sake of the player , cutting off the nose despite the face in other words and still no dice. I have windows xp service pack 2 , all updates and bios up to date. My pc is only 2 years old and have a lexmark printer? a mouse and a keyboard attched to it , none of which create conflict. Even after reformatting my pc i made sure my player was one of the first peripherial devices connected and all to no avail. I think this is a disgrace that such a compnay as CREATIVE cannot put foward a quality product. Does anyone out there have any solid suggestions on how to fix this proiblem if so they would be gretaly apprecaited. ThanksEdward

vacantmind: You might also want to make sure that you get the latest drivers and software as follows:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource
Install . then connect the player to the PC. Then install 2. and 3. (the player must be connected for 2. to verify you have a Creative product).
Also an important test is to install the drivers and software on another PC, say a friend's, and see whether you have the problem. If you don't, then the issue is with your PC, or a compatibility issue with the player. If you do, then there's something wrong with the cable or player.

Zen Micro Photo will not charge batt

My Zen Micro Photo will work (play music) when plugged to?the AC charger. However, it will not charge the battery. Since my son has a Zen also, tryed the fully charged battery, and will not play in he player.
Why will it work when plugged to the charger, and not work with battery?

Hi,
Try to perform the Recovery Tool of your unit.
If that doesn't help either, get in touch with our Support.
Best of luck.

Creative Zen Micro Photo not work with

Hi,i formatted my hd 2 days ago.
I loose my cd with creative zen micro photo expoler.
When i connect my mp3 with usb cable appears an autoplay window of windows Xp that show me what i cand do with my mp3(Transfer Files with Windows media is the only option).
How I can do to use my mp3 with Creative Organizer?
Where i can find creative zen micro photo explorer?

Top of page on Creative banner, click Support-> Downloads-> MP3 Players-> Zen-> Zen MicroPhoto, chose your language and Operating System and select the software that you need.
Be sure to read and follow the instructions on the Show Details... pop-u
ps.
Looks like Zen MicroPhoto Media Explorer isn't posted any more, so Creative MediaSource Player/Organizer 3.30.2 (52.2 MB) would probably be your best bet.
I have had no luck getting MediaSource 5.x to work with my computers and I've tried very hard.

[Zen Micro Photo] Stuck in b

My Zen Micro Photo gets stuck in the bootscreen. When I turn my Zen on it says "Creative" and after a couple of seconds "Zen Micro Photo". While "Zen Micro Photo" is in my screen it does nothing. I tried to take out the battery and turn it on again, but still nothing. Only after a couple of hours it starts working again.
It als doesn't connect properly with Windows XP.
The problem started a couple of days ago when I activated the removable harddri've mode on the Zen to connect it to Windows 2000.
Should a reload of the firmware help?

See the section "My Zen is not behaving properly, won't startup, or goes into rescue mode. What should I do?" in the FAQ.

Zen micro photo wont connect

well my brother got a zen micro photo for his birthday yesterday, so in the evening we tried to start putting music on it and it wont even connect. i have windows with service pack 2, windows media player 0, and the micro explorer. now when i connect it to the computer it wont even start charging :/ and the explorer says its not connected, plz help

a way to make windows detect it is too try and run add hardware wizrd in controlpanel also if u make theplayer gointo recovermode then connect it to ur pc windows USUallydetects it as a plaer in recue mode i think well try if u dont know how toget there i think that u hold down the play/pause button er i mean first take out the batery and then hold down the play/pause botton while u plug the usb into ur pc and i think itll go into recovery mode and windwosshould detect it then and thats when you caninstall the firmware using the executable file and if something goes wrong try it again and usually itll work

Help with my Bran-New Creative Zen Micro Photo. [Questi

<EM>If you don't want to see the backing of my whole story skip to the bold print at the bottom!</EM>I also want you to know I read the FAQs and searched through some topics like this, but haven't found any asking my question.First of all, I'm new to the forum, but I've been researching Creative's Zen for a long time now. I kept observing each one closely before I purchased a product. I then saw the Zen Micro Photo come out. This one won my attention. I loved this, I quickly searched for reviews and went for the buy for Christmas. I told my dad about it and he was "iffy" on the price, but it was better then the iPod in my opinion.Christmas day came and I opened it. Right away I checked everything out I knew a lot about the menu already and all, but not really how to control it. I checked to make sure everything worked. All systems were go. After listening to the defaults (which I loved) I went to go install the software. I already had Media Player 0 and Adobe, oh and I didn't want the freakin AOL toolbar! Lol, so I installed everything else. It took forever, but I hooked it up and I installed the drivers, but as soon as I plug in the USB connector I see: "A HIGH-SPEED USB device has been plugged into a LOW SPEED USB port.After that, I switched USB ports, btu I got same message. I hit the X and then tried to charge. I got the Lightening Bolt, but no dimming of lights. I found out that this computer is not letting me install any service packs, I'm confused about that.My question:Is there anyway I can charge this mp3 player and download music onto my Zen Micro Photo without Service Pack ? Or did I just pay $250 for a really cool glowing mp3 player to be used as a paperweight? (I love this Zen and I ran the battery dead hoping that would make the charging easier).Help?
My Specifications:
My Mp3 Player: Zen Micro Photo (Black)What I tried: Switching USB ports and re-installing Service Pack Software: Not sure how to determine firmware without installing something. I'm on a XP Professional and I'm using the Creative Media Source and Creative Media Toolbox

Thank you DM for responding. I am expecting problems, but it still won't allow me to charge the Zen Micro Photo or even use the Creative Media Source. I can't upload any songs or any contacts on it. I haven't uploaded anything yet, but it's not reading the USB device. When I run Creative Zen Micro Photo Media Explorer I get this message at the top of the screen: "The device is not connected. Please connect your Zen MicroPhoto to the computer. I can't organize anything or add songs... so it just makes all the programs I downloaded useless and my Creative product unusuable.ONe thing it does do though... whenever I plug in my Zen MIcroPhoto to the USB it turns it on and glows, but only shows my battery at the top with one red line and the green lightening bolt filling the battery up.After leaving it like this for two hours the green moves, but the red bar stays the same size.

Zen micro photo won't start & not detected anym

Similar Messages

Maybe you are looking for