Zen Micro Playlist Quest

So, for my micro, i use the organizer to transfer songs. After i transfer songs from my pc to my zen, i sometimes want to transfer some of those songs into a self-made playlist. but the songs in the playlist seems to be in the order i put them in, not in alphabetical order. is there any way i can reorder my playlist so the songs are listed in alpha order?
It might be simple, and it might be right in front of my eyes, but eh.
thanks

I had a quick look at ZMME and couldn't see a way of editing playlists. I didn't browse the player through Explorer though, I used the stand-alone version.

Similar Messages

  • Zen Micro Recorder quest

    I used my Micro to record my son's gig (wow...sound was actually pretty good, picked up all the solos even) but I wanted to transfer the files to my pc and they don't show in zen explorer. Explorer shows "tracks" playlists albums artists, but I didn't see recordings anywhere. Ideas?
    Also, where is the microphone on this thing? I look at it and don't see one anywhere ;-)

    SSR wrote:
    There's no way to connect a microphone to the Micro.
    I tried to conect my microphone to the Zen Micro through the headphone jack. It works. To make sure that I was really using the microphone instead of the built-in recorder, I recorded "high-volumes of sounds" (read: Shouting). It did not have the problems normally associated with the recording of loud noises.

  • ZEN MICRO PLAYLISTS PROBL

    LOVE MY ZEN MICRO SO FAR. ONLY DILEMMA IS THIS. THE PLAYLISTS DONT SORT BY SONG TITLE OR EVEN ARTISTS. ALSO THEY DONT DETECT DUPLICATES. FOR EXAMPLE IF YOU ARE ADDING TO A PLAYLIST, THE PLAYLIST WILL BE IN THE ORDER THE SONGS WERE ADDED. IS THERE A WAY TO SORT THE PLAYLISTS BY TRACK TITLE ON THE PC OR MICRO. THE COLUMNS DO NOT SEEM TO BE PORTABLE. I REALIZE THIS IS NOT SUCH A LARGE CONCERN BECAUSE GENERALLY I PLAY MY PLAYLISTS ON RANDOM. HOWEVER I WOULD LIKE IT IF THESE WERE SORTED SIMILAR TO THE ALL TRACKS MODE OF PLAY. PLEASE REACH ME AT [email][email protected]][email protected][/url]

    >> You cannot sort the columns on the playlists.
    MTORT44, this issue has been discussed before. Don't you think that allowing sorting by clicking column in playlist is quite dangerous? Imagine that you have spend hour to arrange the order of 00 tracks in a playlist. An unintentional click on the column will destroy the order that you have built earlier. And you need to spend time arranging the order again.
    For tracks in a playlist, it is unlikely that you want to sort the order of play by title, artist, or whatever. Usually, you would manually sort it. In MediaSource, you can drag and drop the tracks in a playlist to re-arrange the order.

  • My zen micro playlist prob

    Ok here is my problem. And sorry when i write bad english. Im from holland and im not very good with english.
    But here we go; My zen micro puts the song on titel likeangel - robbie williamsAnd not ; robbie williams - Angel
    The problem here is, the artist don't stand together by there name
    And if i go to play list;artist , sometimes he gives it on the titel, and sometimes on the artistHow can i get my playlist so that every?song just works on artist and?then the?titel??Thnx!

    Grrr.. I had this same problem about 3 months ago. I literally tried for hours and days and weeks!! taking out the battery and restarting it time after time. one day it just finally came on to the little option screen and i was able to update my firmware. It worked better than ever after that. no stopping, no long pause when skipping through tracks. it worked out fine for about 2 months. Now its broken again with the same problem, so looks like ill be out my music for another month until i can jumpstart this thing. How come the Zen Micro doesnt have the reset button like some of the bigger ones? So anyways the only advice that I'm giving you is through my own previous experiences with it. Just keeping trying eventually it will come to you.. Or ship the thing out and pay the 24.95 for an assessment then pay parts and labor >:P I think I've already paid enough personally.

  • Zen Micro playlist synching rarely works with Sync Mana

    I'm not using MTP/Play for Sure apps or firmware (I like the old directory style view in ZMME). I rarely get a clean sync of a playlist onto my Micro. I import the external playlist (usually a .m3u list made on Winamp) to Creative MediaSource, then I (try to) sync it to the Micro. MediaSource always imports the correct number of files, but during the sync process, Sync Manager never detects the full amount of files. Then, when it tries to sync, it rarely even gets the ones it did manage to detect onto the player. I often get the message that "0 files/playlists were transferred" due to some unknown error.
    I've tried connecting the Micro directly to my USB card port (instead of my usual method of using the more convenient front access port or the hub ports on my monitor). That didn't help a bit.
    Does it matter whether I initiate the sync from ZMME or MediaSource? I assume not since they both just kick over to Sync Mangager anyway.
    Any ideas?
    Thanks.
    F/W: ..0
    ZMME: 4.00.27
    MediaSource: 3.30.2

    Try transferring the playlist from MediaSource's PC Music Library to your Zen Micro manually. Do not use sync. See whether it works.
    By the way, have you:<FONT face=Helv size=2>
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - (Depending on your firmware)
    Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.
    or:
    Download and install the latest Creative MediaSource Plugin for PlaysForSure devices (version .00.8) from your product download site.

  • Zen Micro playlist upd

    Hi All,
    Got my dark blue Zen for Xmas and I AM IN LOVE (so far). Battery life to date is so-so, nowhere near 2 hours, maybe if I played it at volume but I digress....
    I'd like to be able to update playlists on the fly....for example, if I hear a song that I want in my '60's rock' playlist, can I do it on the fly, or do I have to wait until I get home and dock the player?
    BTW, showed my Zen Micro to 2 IPOD owners they are sick with envy.... I love it.
    Thanks
    Dave

    Overwriting the playlist would be effecti'vely the same as adding to it, assuming you have both the contents of the original playlist there and the new tracks.
    I agree thought that much more is needed in the way of "on player" editing for playlists, and this has been on my wishlist for a long while.

  • Zen Micro- Playlist-making/Organizing software

    I need to download software that will let me organize the music on my Zen Micro and make/modify playlists. I thought Creative MediaSource was what I wanted, but that doesn't seem to interface with my Zen, only with music files on my computer. So, would somebody mind telling me what program I want?

    I've used the Zen Micro Media Explorer Web Update since I got my Zen Micro in '05.
    I plug it in, let ZM Media Explorer load, then click Organize Music in Device and drag & drop files into the various Playlists.
    You can create/rename Playlists easily by clicking on the Playlists menu tree, right click--> New Playlist, call it whatever you want and then organize from your Music Library.
    Alternati'vely, you can go to the front page of ZM Media Explorer and click the Create a New Playlist in Device icon and go from there.

  • Zen Micro: Playlist transfer issues upd

    <FONT face=Century color=#663300 size=2>I have been browsing through this forum checking out synchronising issues with the Zen Micro. I have only been able to use the Creative software to physically sync playlists to the device. WMP0 will happily sync the songs, but not the playlist itself.
    <FONT color=#663300 size=2>
    <FONT color=#663300 size=2>Do I [and I guess, should I] update my firmware to allow WMP0 to sync playlists? I notice that a few of you have reservations about the firmware upgrade and how it affects the relationship between the device and various other programs. Does the upgrade prevent using Creative's software? Or is there another path I can take?
    <FONT color=#663300 size=2>
    <FONT color=#663300 size=2>Unless of course any of you know if Musicmatch can get round this! As I like the style and usability of Musicmatch.
    <FONT color=#663300 size=2>
    <FONT color=#663300 size=2>All help much welcomed, as I find the Creative Way of managing music files to be very tedious and messy to the eye.
    <FONT color=#663300 size=2>
    <FONT color=#663300 size=2>Thanks folks. :smileyvery-happy:

    Does this thread help at all?

  • Zen Micro--Playlist len

    Quick question: are playlists in the Zen Micro capped at a certain number of songs, i.e., 256 songs? Stated differently, is it impossible to have more than 256 songs in a playlist in the Micro? Thanks.

    I have a different question about "playlist length" ?
    Is there someway to display ?the duration of all songs in the "now playing" que?
    I like to create sets of music that coincide with timed events, so it would be great to be able ? to look at the "now playing" list and have the same info we have for individual songs "time played", and "time left" for a long set of songs. Suggestions (besides logging each track/time as I load it, and adding)...

  • Zen Micro Playlist Error - Please H

    Everything for my zen micro when connected to my computer except for one thing. I can't create a playlist on my computer! Everytime I go into the Zen Media Explorer and try to create a new playlist, it tells me that it is "unable to connect to device. please try again." And yes, my Zen Micro is connected when I try this.
    Anyways, I looked up to see if anybody had this issue but didn't find a thread about it. Can anybody help me out? I've only upgraded the software once... and terrible things happened(my computer stopped recognizing my micro) so I don't plan on doing that again unless that's my last resort. Thanks in advance.

    I think you need to try the normal troubleshooting procedures i.e. a disk cleanup (see the FAQ post).
    Also try using MediaSource, and failing that another PC even (just to test).

  • Zen Micro Playlist Direct

    Can anyone tell me what the Playlist Directory is for on the Zen Micro? I have created several playlists with the Zen Explorer and can see those lists using the Zen Explorer. However, nothing is in the Zen Micro's Playlist directory? What is this directory and how do you use it's
    Tony

    Your issue is very confusing. I think what SSR is trying to say is that "Is your playlist shown in the playlist menu in the Zen Micro?"
    And what you are trying to say is "Can I view the playlist on my Windows Explorer?"
    You have to use Zen Micro Media Explorer to view your playlist or you can use Creative Mediasource. There is no directory that shows the playlist in Windows Explorer or on your computer. The Zen Micro doesn't act as hard dri've like how iRi'ver does. In the iRi'ver you have to configure everything on the iRi'ver or you can use WMP0.
    You can also use WMP0, but I haven't tried making a playlist with WMP0 yet.

  • Zen Micro EQ questi

    My Zen Micro was purchased in Nov 04. I downloaded and installed new firmware in Jan 05. Now I transfer my music directly from my computer's WMP0 files, and use no Creative software. Works fine, I'm very pleased with this wonderful player. I have some questions for SSR or Jeremy, or please direct me elsewhere...
    Question #: I'm sometimes able to play songs with "EQ off". Other times I need to use the pre-set EQ settings. The two I most often use are "Classical" and "Vocal". Please, tell me what the 5 EQ setting numbers are for each of these two pre-set choices.
    Question #2: The fi've frequency settings in my unit's Custom EQ are 80, 250, k, 4k, and 3k Hertz (Hz). Let's say I want to improve or reduce a sound frequency of 800 Hz... Do I adjust ONLY the 250 Hz setting? Or do I adjust ONLY the k (,000) Hz setting (closest to the frequency I want to change)? Or do I adjust BOTH the 250 and k Hz settings?
    Thank you for your assistance.
    kooch

    Thanks, SSR.
    As to Question , who would I contact at Creative Labs? My free help days are long gone. Would they consider this "proprietary information"? My WMP0 EQ has 0 frequency settings, twice as many as my Micro. It also has a "Classical" and an "Opera" pre-set, but the settings are spaced differently.
    I've "guesstimated" what the Micro settings might be, using the WMP0 settings, and I'm close, but I'm also off a little bit... Hence, Question #2...
    God, I hate reinventing the wheel...
    kooch

  • Zen Micro remote quest

    I've been looking at players and liked the Micro and Neeon,as it seems the Neeon's been phased out in favour of it the Micro seems the one for me.
    My main requirements that most players seem not the feature were a remote so I don't have to keep fishing the thing out and really would have prefered a player with Flac or other lossless support,but I guess mp3 will have to do.
    The question I have is regarding the remote,I was happy when I finally discovered it has one as an optional extra and that closed the deal but I have one question.
    On the Cnet review for it , http://computershopper.com.com/Creative_Zen_Micro_5GB/4505-6490_7-35927-3.html?tag=nav
    they claim
    "Everything that comes in the box (plus the optional wired remote) matches."
    The picture also shows a much cooler looking remote than the one in the shop,that I take it has the same colour as the player you choose.
    Are they not available?

    The wired remotes for the Zen Micro are not available in the same full range of colours that the player is, but you can get it in black and white. You didn't mention what region you're in, but here are a few links:
    US online store (they have it available in Black/Black, Black/White and White/White)
    European online store (available in Black or White)
    Cat

  • Charging Zen Micro battery quest

    Hello all,
    I went to charge my Zen Micro 5Gb last night. Plugged the usb end into the Micro and put the plug in the wall socket and the Zen showed it was charging, but I had caught the lead between the li've and neutal pins of the plug, so it wasnt flush in the wall socket.
    I unplugged, moved the cable and plugged back in (a matter of no more than 5 -0 seconds) and the Zen did nothing, just a blank screen.
    Pulled the plug out again and waiting this time before plugging back in and all went well, 3 hours later all charged.
    I assume I spiked the battery? Could I have done any harm to the battery or player?
    Any replies would be appreciated.

    I guess at worst you might have had an intermittent connection, which in turn might have damaged the player (constant "spiking", as you mentioned).
    If the player is fine though it sounds to me like it didn't suffer any damage.

  • Zen Micro Power quest

    Hi, Im in VietNam right now for vacation... I notice that that power here is different from the USA. In the US they use 0 power, here they use 20. I charge my Zen Micro by computer, would it crash my Zen Micro if i charge it with one of the computer in VN using 20 power?

    HI all,
    All PC's will drop down this down to the correct voltage regardless of location. Most PSU's on PC's have that little red switch switch which should never be touched that will change the PSU to accept either 0 or 22-240 Volts. So in short the PC's PSU does the work to drop this down to a standard voltage regardlesss of location.
    Also the power supply thats available for the Micro will accept any global voltage (0-240 v).
    Hope this clears it up.
    John

Maybe you are looking for

  • Question about Pavillion DV4 1123us

    Hi, I hope some one can answer this question for me here. I wanna know if it is possible to install a graphics card into this model or if i can upgrade the graphics card in it. I've searched all over the internet and found out that it is possible to

  • How to send the body of mail in html format using servlet

    Hi i developed an servlet using sun.net.smtp.SmtpClient package,my servlet receiving data from an form,i can able to send mail successfully,but my mail body part is in the text format,but i would like to send it as an html format,for ex <input type="

  • WAD Problem: data below 6th level of Hierarchy is not displaying.

    Hello Experts, I am executing a template in the portal and while giving selections for particular 'cost element' in the selection screen, the message is coming saying no records available. There are 9 levels of hierarchy and up to 6 levels the data i

  • Java-based media players no longer have working buttons.

    When I visit a website using java-based media players embedded on the page, autoplay will work just fine, but play/pause, volume control, etc. will not click. I already had Firefox updated to 10.0.2 days before this problem cropped up. With the exact

  • SAP T-codes getting Complied

    Hello SAPers,                      I'm getting complaints that t-codes getting complied on my ECC6.0 Server,                      I have run SGEN after I applied Ehp3 but dont know why this is getting complied                      Do anyone know why