Zen Micro problem, please help

I changed my Zen Micro's firmware to "PlaysForSure", but then I wanted to get back the original firmware.
So I used the "Recovery mode" to erase PlaysForSure firmware (v. 2.2.02) and then tried to load the original firmware (v. ..0).
Then my problems begun: firmware updater says "Your player is not connected, please connect your player.", altough my player is correctly connected and the drivers and other Creative's stuff are installed.
Computer (WinXP) ofcourse detects the player (as a PlaysForSure device).
I also tried to load the PlayesForSure firmware again, but it didn't work either.
So, what can I do to fix my Zen Micro's firmware?
Does the warranty cover this kind of things?
I would be very pleased if someone knows what to do, because my player really doesn't work now at all.

Okey, now I have uninstalled WMP and WMP Runtime Format, and installed WMP 0 again, but still firmware updater doesn't find my player connected. The player appears in the device manager as a "Portable media player", not under USB devices as when it was running with firmware ..0. If I try to uninstal the drivers, driver uninstaller totally freezes, and I think that all USB devices freeze too. So what can I do now?
pie wrote:
how do you install wmp0, i tried but it wont let me because its an older version
Open add/remove programs, click "show updates", scroll to windows updates, uninstall WMP and then WMP Runtime Format (after every uninstall you will have to restart your computer). Then download WMP 0 from http://www.microsoft.com and install it.

Similar Messages

Zen micro problem please help..it seems to have wiped the libra

I would really appreciate any help anyone could offer with this problem as I have no idea what to do and fear I may have lost all the music I've collected over the past few years as none of it is backed up on my computer...My zen was working fine yesterday but then all of a sudden it froze, I couldn't get anything on it to work so I removed the battery as I have done before, it went on to 'rebuilding library'?but after a few seconds said 'Select music to play from the library' and there was NOTHING on there. No songs, no artists, nothing. It still says the space is being used up and there is only a few MB left but it's saying there's no songs on it. I tried accessing them through the computer but that wouldn't work either. PLEASE does anyone have any suggestions?

Maybe you could try running Disk Clean Up from the Recovery Mode
Remove Zen Micro's back plate and battery
Hold the On switch to On (fully to the left) and hold it there as you replace the battery
Select Disk Clean Up and Yes from the menu, it's at the top of the list
It will take a moment or 2 to complete Disk Clean Up, allow it to finish
Once Disk Clean Up is complete, select Reboot at the bottom of the list
You should see a Re-building Library notice once it reboots and hopefully your music will be accessible again
Clean Up will re-set your Zen Micro to its factory default settings, so you will have to redo any special settings that you had
Best of luck!
/with today's huge hard dri'ves, why don't people back their music up :|
I've got mine backed up on 2 different computers plus 2 external HDDs.

Zen Micro problem need help

Today i was listening to music and my zen micro just froze while playing and no buttons could be pressed and the lock button wasnt on. So i took the battery out and rebooted the player but it froze at the creative screen. I went home and i went to recovery mode and tried to reload the firmware but it said erasing firmware for more than 2 hours. So then i tried a format but it said formating for the same amount of time. I need help please. Also, recently i've had problems witht the headphone jack. When ever i would stick it in it would sound distorted and i would have to move it around until i got it to a certain spot to hear it good again. If anyone else has this problem please tell me. One more thing i had returned my other micro zen in for hard dri've probems and this was my new one do u think if i have to return in (hopefully not) that they would accept it.

If the functions in Rescue Mode aren't working properly then you need to contact Creative Support.

Zen Micro Problem, please read.

Hello, I've owned my Zen micro 5gb for around 8 months now with a few problems here and there that I could li've with , I use it mainly at work and normally I get around 6hrs battery life but I recharge at lunch, anyway, the past week my Micro will freeze every day when trying to go back to menu options or when I pause a song , it freezes up... I take the battery out , put back and reboot and it goes either to low battery and Im stuck all day with no player or it stays on the creative logo screen , I reloaded my firmware again and it still does this, Ive had to redownload my library about 20 times since Ive owned it and it really is getting annoying dealing with this.... I dont want to buy another MP3 player regardless of brand and am ready to junk this equipment, my questions are:
---is it the battery itself? it shows 3 bars but quickly goes to or none within an hour, do I buy another one already?
---if the freezing isnt due to the battery, what firmware should I use?, I use it mainy with Napster to go, if I use the latest firmware , NTG doesnt recog. my device
any help ? when working fine I really love the thing but......

---is it the battery itself? it shows 3 bars but quickly goes to or none within an hour, do I buy another one already?
Possible, but very unlikely. I've yet to see any definite problem with a battery to-date.
---if the freezing isnt due to the battery, what firmware should I use?, I use it mainy with Napster to go, if I use the latest firmware , NTG doesnt recog. my device
Is the 2.20.05 firmware not working with Napster?...
If it's freezing regularly, say once a day, you ought to contact Creative. If you've reloaded the firmware and it's not solved it, then it sounds like the player's faulty.

Zen stone problem, please help

ok, so i got a zen stone yesterday, it worked fine until today. then when i charged it, i let it fully charge, then i turned it on, and it powered on and.... froze. so i reset it, turned it on again, and it froze again. i repeted this several times, only to find the same result. i tried plugging i into the computer, it wasnt recognized, i tried unplugging it several times again, nothing. so i tried the troubleshooting guides, it still didnt work. so what is wrong with it's please help me.

Okey, now I have uninstalled WMP and WMP Runtime Format, and installed WMP 0 again, but still firmware updater doesn't find my player connected. The player appears in the device manager as a "Portable media player", not under USB devices as when it was running with firmware ..0. If I try to uninstal the drivers, driver uninstaller totally freezes, and I think that all USB devices freeze too. So what can I do now?
pie wrote:
how do you install wmp0, i tried but it wont let me because its an older version
Open add/remove programs, click "show updates", scroll to windows updates, uninstall WMP and then WMP Runtime Format (after every uninstall you will have to restart your computer). Then download WMP 0 from http://www.microsoft.com and install it.

Zen Micro Problem (Please He

Hello,
I have a Zen Micro that I got less than a year ago. Sometimes when I have my Micro connected to tmy computer and I go to "Organize" files, all of the file names will be wrong. They can't be changed either. The titles will be by all different artists even though I am in the folder for one artist. When I play the songs on my micro, all of the right file names are there, though.
Also, just recently, I went into my playlists. Almost every song in all of my playlists is called "Cynical" which is the name of a song that I have on my Micro. But, it should only be on one playlist. Instead, almost every song has that name. So, when I try to play my playlists, I just hear one song again and again and again. I tried doing "Clean Up," but it did absolutely nothing.
Does anyone know what the problem is? How to fix it's Thank you.

Should I just get a new one?

Zen Micro Problem Please H

My zen micro has been working perfectly for just under year. Then one day it froze while playing a song so I had to take out the battery to restart it. When I did that it began to "Rebuild Library" after it had finished that. All my information tags for all my songs were missing. The songs that I had bookmarked were deleted and now it says "please select music from library" when I play any song. There is also no longer the track is it's currently black. I also tried connecting my zen micro to my computer andit did not recognize it. When I manually went into the IE Brower that lets you arrange your MP3 player none of the features were bold. Do I have to reinstall my software on my computer? should I erease all my songs and load them on again?
Thanks

Have you try running Cleanup option from the player Rescue mode.
Jason

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT

If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.

I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.

My iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* to the point where i just want to smash it how do i solve this problem please help?

my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?

Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you...

Hello!i have problem to insttal potoshop cs6 this is,we've encountered the following issues.installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.please,help me

this is,we've encountered the following issues.
installer failed to initialize.this could be due to a missing file.please download adobe support advisor to detected the problem.
please,help me!

Hi there Mylenium, is there any way you can help me? My cs6 is doing all kinds weird things lately. The liquifying too stopped working completely, when I try to work with the actions, it starts flickering and changing opacity in color by itself. It starts flickering and is completely out of whack! I tried uninstalling and reinstalling and still no luck. I tried getting in touch with adobe and no luck with that neither! Is there anyway you might be able to help?

Zen Micro problem, please help

Similar Messages

Maybe you are looking for