Zen Micro Scr

besides sending it to Creative to change the screen is there anything else i can do to remove these scratches on the screen?

There are products that allegedly "repair" the screen, but often they work by buffing out a larger scratch with lots of smaller ones. Others supposedly "fill" the scratch also, but I'm dubious that these work.
Better to make sure you get a stick-on screen protector or a case with a protector to prevent it happening again.

Similar Messages

  • Blue spots on Zen Micro scr

    Recently, a number of blue spots have appeared on my Zen Micro screen. These spots are there even when the player is off, and they're all clustered around the center of the screen. Any idea what they may be, or how to get rid of them?

    If they appear even when the screen is off, then it sounds like something is physically under the screen, like bits of dirt or dust. Make sure it's not something that's just stuck to the front by wiping it with a cloth.
    Cat

  • Zen Micro Frozen on " Zen Micro " scr

    HELP
    !!! My Zen Micro will not boot up past the screen that reads Zen Micro. I tried shakeing it as I read here but that didn't work I also tried the tapping on the side and that didn't work either. What can I do? Thanks

    FIRST OF ALL STOP HITTING IT!!!
    It is a HARD DRIVE player!!!
    This means hitting it may cause the HD's head literally CRASH on the disc completely and uterly destroying it!!!
    Now, if it isn't already too late try this:
    Remove the battery.
    Move the switch to the "on" possition and KEEP it there while putting the battery back and it boots until it shows a "Recovery Menu" screen.
    Then Select the FORMAT function.
    CAUTION, THIS WILL DELETE EVERYTHING ON THE HD, MAKE SURE YOU HAVE BACKED UP EVERYTHING!!!
    Then select the reboot.
    If it stiLl doesn't work download the latest firmware ( or 2 version, depending what you had before, if you don't know which one to use I'd suggest DLing FW version ..0) from
    http://www.europe.creative.com/support/downloads/
    and save it on your PC in the location you will easily find it ( e.g.
    Desktop).
    Then do the same thing to get back to the Recovery Menu screen but this time select Reload Firmware from the Recovery Menu and follow the on-screen instructions on your player. This will take a few minutes. BE PATIENT and DO NOT DISCONNECT your player
    during the process. IF YOU DO YOU'LL COMPLETELY BRICK YOUT PLAYER!!!
    Once completed select Reboot.
    If it still won't work take it back to Creative...
    Cheers!Message Edited by Keyper7 on 02-5-200602:05 AM

  • Never heard of problem? Dust in my zen micros scr

    im recently new but i've had my zen micro for 6 months aprox and about 3 months ago i dont know how but i think dust gets in and its is very aggrivating making it block up what ur screen says i've tried blowing on the sides but it just fogs up and disappears other then that i havent been able to do much and customer support has been useless through my emails .other problems besides that are the touchpad getting scratched revealing the blue back ,battery reducement, caseing getting scratched up it seems but it looks like its inside the back cover and i usually never take it out and the headfone socket being loose and it switches ears unless i put it ina certain position i was wondering if i still had warranty and would it cover that?

    The_Mutant wrote:
    dude i also get dust in my screen! not fair...i've been looking everywhere for a solution and i cant find anything
    then try harder.use the search function. there are some threads in this forum about the dust in the display.
    to sum them up. dust comes from your pocket. like there is everywhere sand when you come from the beach. to avoid it, you have to use a case for your ZM.
    there are two ways to clean it. one is to open it loose your warranty and clean the display with a soft brush. the other has something to do with high pressure air and blowing the dust away, but I think SSR can tell you more about this.

  • Dust in my zen micro scr

    When i got my zen micro back from creative for repairs there was a little piece white dust stuck in my screen and it hasnt gone away, it has moved around but never gone. Is there any way to get this out without sending it back to creative? thanks.

    ok, erm here is a site hope it helpshttp://www.hardwarezone.com/articles...id=9&id=33&pg=

  • Dirt behind the Zen Micro scr

    First of all I had it in my pocket which apparently had some dirt in it. Somehow some dirt got in behind the screen, it doesn?t ruin the player but it is very annoying. Is there any way to fix this?

    panda_nelwin wrote:Oh ya another question. Is there any program that i can download fre to id tag all my music? I download most of my music song by song and a lot of them arent tagged.
    It depends exactly what you're after. There's a list of favourites here in the Zen FAQ at Nomadness.net.
    Also would compressed air maybe help to get rid of the dirt?
    It depends where it is. It's worth a try.

  • Zen Micro starts with blue backlight and then fades to blank scr

    My 2 year old Zen Micro which has had little use and few recharge cycles will neither charge, play music, or connect to my computer. I am hoping a battery replacement is all that is needed but hate to buy one if these symptoms don't sound like a bad battery. I have pulled the battery to "reset" it with no benefit. While plugged in I can hear the touch responsi've keys click but the screen is blank besides the charge logo and I get nothing when it is unplugged. It won't be recognized by my computer (Vista and new to the player) so I can't scan the hard dri've. Does this sound like a battery issue or are there other steps to try before replacing the battery. I contacted Creative and all they said was send it in and they will charge me no more than $35 for replacement if the repair is greater. If I had an iPod, they would look at it, swap a battery, and it'swould get solved in one minute at the in-store Genius desk. Thanks in advance.

    kind of hard to understand your message but i think i get the general idea.....it should say that until its charged........

  • When I charge my zen micro it says battery low and stays on that scr

    When I go to charge my zen micro it turns on and comes up with a screen that says "Battery Low" then stays on that screen. Any suggestions or do I just need to buy a new battery or is my player broken or what?
    Dakota

    kind of hard to understand your message but i think i get the general idea.....it should say that until its charged........

  • Zen Micro Photo frozen on Creative scr

    Hi, I have had my Zen Micro Photo for three months and it has worked fine untill today. When I turned it on it went to the creative screen like it usually does and it just stayed there. I tried taking out the battery and putting it in again but it did the same thing. It doesn't even do anything when I hook it up to the computer. What can I do? I'm freaking out here please help me!!!!!!

    It could be that the microdri've is "stuck" or in failure.
    While the MicroPhoto is turned off, try tapping (well do it very firmly and with enough force) on the palm of your hand, restart the MicroPhoto and see if it boots up completely.
    If not, a firm smack on a table top or counter may unstick the heads of the microdri've if that is what's preventing the microdri've from completely booting up.

  • Zen Micro 6GB Frozen to the Starting Scr

    I haven't opened my Zen Micro 6GB about 2 months after I received it and when I try to operate it, it stays frozen to the screen with "Creative, Copyright(c) 2004, Creative Technology Ltd, All Rights Reserved" and stays like that forever.
    I even tried removing the battery, holding the power to on, and placing the battery back in and nothing is happening.
    Can you give me some pointers? Or should I so a warranty exchange?

    tried giving it some more power? It could just be lacking battery....

  • Zen Micro - Blank Scr

    Ok, so I bought my Zen Micro 6mb a few years ago and it worked great. Then my computer died, so I had no real use for it, so I gave it to a friend to use. He started using it as a portable storage device, but when he returned it it didn't work -at all- anymore.
    When I plug it into my USB, it does detect the device, but that is all. He told me he thinks he deleted the operating system on it, or whatever. Basically -everything- has been deleted. When I turn it on the screen is blank, except for the battery gauge.
    Also, I looked through all my CD's and DVD's but I can't find my installation disc. I swear I gave it to him, but it was like 2 years ago and I can't remember, but he says I never gave it to him. Is this a problem?
    I searched the forums, but since I really don't know what happened to it, I don't really know what to search for.
    Any help you could offer is greatly appreciated.

    If so many people are expirenceing this problem, its no just one or two player's that are at fault, maybe in the design of the player there was somthing overlooked.
    In my opinion this problem is somthing that Creative should definatly research into, as it could affect many more players. Its not good especally on players that are not even a month old!
    LCD (Liquid Cristal Displays) themselves don't just blow or go wrong, and its higly unlikely that this is what has gorne wrong, the problem may lay with the connection from the LCD to the PCB (Printed Circuit Board) usually connected together with a flexible carbon track, sometimes these tracks can slip and make the display malfunction. This happend to my old minidisk player, if fixed the display problem by moving the carbon track - but i would not advise that anyone tampers with their player unless the warrenty has expired, and you cannot be botherd to get Creative to look at it.
    But i would reccomend that in warrenty or not, you should get Creative to repair the problem for you, as searching for your music "blind" is very annoying and frustrating!
    Message Edited by 2027746 on -30-2005 0:46 PM

  • Zen Micro Frozen Scr

    I power-on my Zen Micro as I usually do. The player turns on but i can not navigate through the player because the touchpad does not seem to be registering. Then, powering-off does not work either. I must remove my battery in order to turn player off.
    When I boot into Recovery Mode, it is the same issue. I believe my device is defecti've but Creative just recently replaced it approx. 2 months ago.
    Is there anything that I can do?

    I have the very same problem! About 2 months ago my Zen Micro?broke (after having it for 3 to 4?months). I took it back to the store, they send it to the factory and i got a brand new one free of charge. This was about a month ago...today i wanted to turn it on and it just froze and i have to take the battery out if i want to turn of the player. This is ridiculous, i haven't done anything weird with it, i have a protection skin around it and it's only month old! I have been very carefull with it. Im thinking of going back to the story and ask? for my money back....im done with MP3 players,? i miss the CD players!?

  • Zen Micro locked up on "Creative" scr

    My new Zen Micro is locked up on the screen that just says "Creative". I can't get it to do anything. I've removed the battery and tried the recovery directions. It will get me to the recovery menu but after selecting a function it just sits there. Any suggestions? Thanks.

    Happened twice on the first two I had... I have still, serious issues with my third. I am contemplating abandoning ship..

  • Zen Micro: Change Startup Scr

    When I open up the properties of the Zen Micro (right click while exploring) in the Settings tab theres an option to change the startup screen of the Zen Micro, but its greyed out and you cant change it. Wondering if theres a work around, since a custom startup screen would be very cool.

    Nope, it can't be changed.

  • Zen Micro Startup Scr

    dfoes anyone kno how to change the startup grapic on the zen micro? What versions of the programs and firmware do i need?

    I can not do this ith the current firmwares available. i doubt there is going to be such a firmware to let you change the start up screen logo

Maybe you are looking for

  • Can I copy an existing LR catalog to a new disc?

    I have installed a new primary disc (C: in Windows 7 Pro) and re-downloaded LR4.2 release candidate. Can I simply copy the existing LR catalog (which I have on old disk, still accessible via USB, or from several backup copies) to the new disc and LR

  • Worflow triggering twice

    Hi guys, my workflow is triggering twice. why how can i resolve this issue. please give me suggestion. Thanks Sankar

  • Reader for PC Horrible Application

    Reader for PC application is the worst that I have ever run across in some 33 years in the IT business. I had worked quite nicely with the Reader Library app since I purchased my PRS-500 when it was 1st available. Huge mistake installing the Reader f

  • When trying to sync photos from my PC only a few of the photos end up on my ipad. How can I fix this?

    I am having trouble syncing photos from my PC, only a few end up on my ipad. Does anyone know how to manage this?

  • Leave Request 4.7

    Hi all, I am using version 4.7 ESS with EP6. I have set this up to allow employees to enter comments when requesting leave. However I cannot find where this text is stored in the back end tables once approved, or even when the absence has been reques