Zen Micro stucked on docked scr

My 4gb zen micro keeps getting stucked at the docked screen.Btw...the arrows on the docked screen is black. This happens frequently when i upload music to my player.While uploading halfway,a message will appear 'the file could not be copied. It may not exist or is used by another program'.But there are no other programs running.When i play music from the zen media explorer,the zen micro also gets stucked at the docked screen.
There is also another problem. The zen micro sometimes make the music loud and sometimes makes the music very soft. I changed 3 sets of headphones but it is still the same. I tried the headphones on other products and it seems to work fine.
Pls pls help me...

Btw...i haf tried the cleanup and formatting the player...but it still gets stuck often.

Similar Messages

  • Zen Micro Stuck in "Docked" m

    Hello,
    My Zen Micro is stuck in the "Docked" mode. I can not turn it off. When I plug it into my USB port nothing happens, the computer does not see it.
    My daughter may have unplugged the player with out first "stopping" on the computer first.
    Any ideas how to get it "undocked".

    As a matter of fact, right after I posted this request I decided to remove the battery to see what would happen and it worked, Doh! But I was wondering if there was a better way to resolve this problem. I guess I found out :-)
    Thanks for you help
    CO

  • Zen Micro Stuck On Startup Scr

    My Zen Micro 2 gig is two years old. It seems it is stuck on the startup screen that states "Creative." I thought I heard a slight pulsating/droning sound upon startup. I was going to merely try a firmware reinstall or format but I cannot even get the computer to recognize a connection with the device. When I charge the device, I do get the animated charging icon - however I am sure that would be independent of any other features.
    If I remember correctly the Micro is a hard dri've based device? If so I would think that it must have been damaged somehow. Either way, any suggestions on how to attempt a fix? Or is the player gone to MP3 Heaven?
    Thanks for any help. And for the record, I have been very happy with the device throughout my ownership.

    If you're absolutely sure you cannot enter recovery mode then you'll need to contact support to get it replaced.

  • Zen Micro - Stuck in recover mode - h

    Hi,
    Can anyone help?
    On using my micro today, on inital booting up for some reason it went straight into rebuilding the data library before going on to say "firmware problem".
    I then decided to try clean up, reboot firmware but nothing seemed to work, before finally formating the thing as the last option. The format has worked, as memory back to full and also my keypad sensistivity has changed back to the original settings.
    However, now the micro is stuck in the recovery mode, as the when using reboot option it just returns back to the recovery mode screen - even turning off the thing/removing the battery does nothing to help, as it just returns back to this screen.
    Any advice/help appreciated before I give in and ring Customer Support!!
    Cheers.

    First of all I had this exact same problem. I had to contact customer support. I had to send my Zen Micro in. Your best plan of action now, is to email or call support.

  • Zen micro stuck in recovery m

    today i decided to try to upgrade firmware on my Zen Micro for the first time. It was on .00.06 (I think) and i tried upgrading to the PlaysForSure 2.2.02 update. It was doing alright during the installation process at first, but then my Micro was supposably rebooting and...never came back. It said the installation was suppose to take no longer than 5 minutes. I waited at least 0-5 minutes, still nothing, so i cancelled it. I ended up formatting the micro completely, and I'm stuck in recovery mode. USB will not recognized it being connected. I even try uninstalling the creative zen micro software on my computer and i get some error and it won't allow me to do so. I don't know what else to try, any suggestions?I leave town for a week tomorrow afternoon, so i would really really appreciate any quick help!?Thanks in advance

    well let me be the first to tell u there is a way to fix this. I found out yesterday by reading some old forums and found something called the caveman method. All you have to do is hit one of the rounded corners on the bottom of the zen micro against a hard surface (such as a table).
    I know it sounds simple and destructi've but it worked for me and pretty much every one on the forum don't believe me heres the link: http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=36568&view=by_date _ascending&page=
    It has pages of people stating that it has worked for them. I was so happy that it worked for me since my player has been broken for about 7 months. They say that the micro disk stopped spinning, and by hitting it on a hard surface a few times gets it spinning again. Based off of my experience with the caveman technique, go a little crazy with it. Your going to need to use quite some force.
    Unfortunately, after i got mine working i now hear some kind of grain moving inside whenever i shake the player (guess i over did it). Don't let this discourage you though because once again the player is unfrozen and loads pass that dreaded creative copyright and you can now use it.
    I do give you one warning, once you get the player working try not to be an idiot like me and reload the firmware. That just brings up a whole other problem.
    Good luck Cavemen s lol

  • Zen Micro stuck at "Creati

    So I've had the 5gb Zen Micro now for a few months and it's been wonderful... No drops, no damages of any kind, and it runs like a dream.
    Today I put it in the kitchen on some portable speakers and had it playing... I hit the skip song button, and then it did nothing... I turned it off and back on and then it was stuck on the "Creative" screen.
    Checked on the site, and tried to do a "Clean Up" from the recovery menu... 5 hours of "Scan Disk" and it wasn't changing at all. When I power it on, if I listen close, it makes a music-esque noise repeatedly, but I can't tell what it is... it's not a whirr or a click, but it's not a normal noise.
    I suspect it's a HD failure, but am hoping I don't need to send it out :-/
    Can anyone help?

    i have the EXACT same problem!! god and it pisses me off too! this is the first time i experienced this problem, the shop owner i took it to didn't even know how to turn the **bleep** thing on, let go know what the problem is :S i don't wanna take it back either, the last time it was broken (this is now my third and i don't like it anymore!) it took them 2 (!) weeks till they said they couldn't find a problem and i got a new one....
    i looked at other forums, this seems to be a known problem at creative, i was advised to turn it on into "recovery mode" so i did... indeed, more then 5 hours of cleaning up, and i turned it off cause i thought it wouldn't be helping at all....
    i also emailed this customer support, i hope to recieve my awnser tomorrow, but does anybody on this forum KNOW WHAT TO DO ABOUT IT?? i;d like to know if there's a solution to this problem before i take it to the store....
    thanks anyway

  • Zen Micro - Stuck in recovery; can't connect; can't upgrade firmw

    I sent a request to customer service, but since I purchased my Zen 3 months ago, I'm not eligible for email support. SO, if anyone can help, I would appreciate it...since I can't do anything with my Zen right now.
    I just bought into a subscription service and my 4Gb Zen Micro is stuck in recovery mode after upgrading to PlaysForSure firmware.
    Here's what happened:
    . Downloaded and installed Creative Zen Micro PlaysForSure Firmware update 2.2.02. Zen restarted after installation stalled. Displayed "Firmware Problem"
    2. Zen connected to PC and only recognized by XP as an MTP Device MTP Device Properites:
    Model Name: Creative Zen Micro
    Manufacturer: Creative Technology Ltd
    Firmware version: 2.2.02_0.00.65
    3. Downloaded and installed Creative Zen Micro Media Explorer Web Update (ZENM_PCAPP_LB_MTP_PDE.exe) -- install failed because it never recognized my Zen, which was connected
    4. Downloaded and installed Creative PlaysForSure Devices Plugin 5.00.36 for Creative
    MediaSource 5 Player/Organizer (CMS5_MTP_PCAPP_LB_5_00_36.exe) -- install successful, but it never recognized my Zen, which was connected I think I need to reload the firmware but I can't get any of the firmware updates to work. None of the creative software, including firmware updates, recognizes that the Zen is connected. I have not been able to figure out a way to have XP (SP2) recognize the device so that Ican reload the firmware and use the Creative Software. WMP 9, 0 and (I tried them all) do not recognize the device when it's plugged in. I also plugged in the Zen into two different computers. Same results.
    5. Tried directions on Solution ID # 4275 MP3 player not detected. Same results.
    6. I've followed the registry edits suggested on Solution ID # 0053 MTP players not recognized in Windows XP and that did not fix the problem either.

    It took a while, but I finally have my Zen Micro working again. I did some searching in the forums on "Firmware Problem" and that gave me some great ideas. Here's what I did.
    . Uninstalled WMP and 0. Rolled back to WMP 9.
    2. Edited my registry. I searched for anything related to the Creative software and deleted the entry. I just searched for the word "Creative". Restarted my PC.
    3. When I plugged in my Zen, Windows recognized it, without using the MTP driver. Problem was that I wasn't be able to load a driver to use the device. So, I went and installed WMP0.
    4. After installing WMP0, I plugged in my Zen and Windows recognized the device and installed a driver.
    5. I ran the firmware upgrade from Creative and I was back in business.
    Hope this hel
    ps.

  • Zen micro stuck in recovery mode

    Hi
    zen micro frozen in recovery mode and i downloaded new firmware on to my pc
    but it wont even open im at a loss at what to do any help much appriceated

    Have you tried to reset it using a pin of some sort? Or something sharp? Or try taking the battery out and put it back if it doens't have a reset button. It'll do the same thing
    WHAT TO DO AFTER:
    I did have a problem like this though, and it seems to be common when in Recovery Mode.
    Before connecting to USB, first open the firmware update (Don't connect it before hand). When it says to connect, do so, but not before, and then select Update.
    I hope this helps Message Edited by flame on 02-09-2006 :39 AM

  • Zen Micro stuck in recovery mo

    I have had my Zen Micro for sevral months and it recently just froze on the recovery mode screen. i cant turn it on or off but i can do the functions on the recovery mode. BUT none of the functions do anything. i tried reinstalling the firmware, but it freezes my computer halfway through the insallation, reboot just turns it off the back on again t the same screen, clean up freezes the player and the other option does nothing either. what can i do, as the uk customer support services doesnt work and i have only been sent an automated email telling me to do what i already have done. is this like the problems the other people discribe and they havd to bin theres, but mine does not seem to be makeing the humming noise.

    ok it does make the humming oise but stops after a while and then goes to the recovery mode screen
    YOU ARE MY ONLY HELP AS CREATIVE WILL NOT REPLY TO ANY OF MY EMAIL. AND THERE CUSTOMER SERVICE NUMBER WILL NOT WORK
    DOES ANYONE KNOW HOW TO CONTACT THEM.

  • Help! Zen Micro freezed on "Creative" scr

    Hi all,
    my Zen Micro has gone crazy... all of a sudden it switched itself on, and it just stays on the "CREATIVE" screen and doesnt do anything.
    I cant even update the firmware because it wont connect through the USB.
    Also i tried Disk Cleanup and Formatting and everything. but nothing works
    It just freezes at those screens.
    Some one please help

    if your micro ever freezes, I would just get an RMA to return it to Creative to get a replacement. I did that, and within a week, they mailed me a brand new zen micro which works perfectly fine (ie. no freezing, no errors, no battery loss issues, etc...)...

  • ZEN MICRO FREEZES ON CREATIVE SCR

    argh.i need help.i turn on my zen micro and it starts up as usual but then freezes on the creative screen and doesn't do anything. i've tried going into recovery mode, i rebooted and that didn't work. so i reformated and that didnt work either :S?i really dont' know what to do.it also isn't recognised by my computer!!?i've only had it for a few months... but i can't find my receite for it. Is there anyother way i can use my warranty without having to have my receit's?Please help.

    I am having the same problem, we have tried absolutely everthing and nothing has worked. We have given up now and are going to buy a new one. My Microphoto lasted 4 months -I tried to say under the sale of goods act that there you would expect an MP3 player to last longer than that but these big companies don't give a stuff. Sorry not to have been more positi've. If anyone out there dose have any ideas please help us!

  • ZEN MICRO STUCKS ON ''CREATIVE'' SCREEN! HELP!!

    Last Saturday i transfered some mp3s to my
    creative zen micro.After that i turnt it
    off.After some couple of minutes, i turnt it
    on.But in the ''CREATIVE'' logo, it stopped
    corresponding. I took the battery off and pluged
    it again.But the same happened. In recovery mode i
    tried everything:reboot, reload firmware, format,
    clean up.[At the reload firmware, format, clean
    up, the device stopped correspondig] Please?
    help me?because i'm in a desperate
    position.MY PARENTS MUST NOT LEARN ABOUT IT!

    when you put it against your ear do you hear a soft buzz? if thats the case your HD crashed, i had that too last year.
    it was 2 weeks after i bought it. i got a new one imidiatly.
    now 3 weeks ago i send it back again because the contact of the ears was screwed. i got a new one that was gb bigger than i had so ty creative. but now this one crashes evry 2 days, stops, start up, stops again i try that for 30 times then it runs but it loses the last update of songs... somtimes stops with rebuilding library too but the recovery mode worked..... damit crashed again

  • Zen micro-stuck at creative sym

    when i turn on my zen micro it doesnt work it just freezes at the creative sign (the after creative copy right) what can i do to fix it

    Jamez3,
    First off I would try going into rescue mode and attempting a clean up. If that doesn't work then try a format. The instructions for this can be found in the FAQ at the top of this forum. If that doesn't work, contact support and they will help you out (as this may be a problem that will require a repair of the player).
    Jeremy

  • Zen Micro frozen at 'Creative' Scr

    Help !!
    Life without my music is going to be tough - need assistance here !!
    Basically, my Zen Micro has frozen at the Initial 'Creative' Logo screen ..... won't go any further than this. Tried taking the battery out and putting it back in again - but to no avail.
    I can get the to the Rescue/Recovery screen, and tried rebooting - no joy.
    Currently it's sititng at Scan Disk, but it has been sitting there for about /2 hr now without any apparent progress.
    Reluctant to try any of the other Rescue options at this stage, as I am quite scared about losing all the tracks I have put onto the player.
    As far as I can recall, the Firmware is .0.8 (basically firmware hasn't been upgraded since I bought the player back in April).
    Any help in getting me back to listening to my tunes would be greatly appreciated.

    As per the FAQ post, if you can't get functions in rescude mode to work the player is faulty. You need to contact Creative Support to get the player replaced, contact links are also in the FAQ post and also available via links on this page.

  • Zen Micro freezes at "Creative" Scr

    Just what the subject says. I tried to start it up and it goes past the Copyright screen but stays at "CREATIVE". What do I do to fix it (If I can)?

    My Zen Micro is also suffering from the same problem. It turns on and freezes on the creative logo. I tried using the Rescue mode but nothing happens. Reboot will just end up on the same frozen screen. Scan disk, format disk and reload firmware just display a popup saying that the task has started but it stays frozen there. Using the USB cable the computer does not recognize the ZEN. It does recognize that a media player was connected to the usb port but freezes any program that tries to communicate with it.
    There is no harddri've noise at all coming from the player.

Maybe you are looking for