Zen Micro Vista Driv

Hi,?Sorry if I have missed this information elsewhere... I have had my Zen Micro for about two years, with no problems. Now that I have a new PC with Vista on it, it won't detect my Zen and won't allow me to install MediaSource. I have looked round this sight for new Zen Micro drivers but can't find any. Can anybody point me in the right direction?

Thanks for the tip! It helped me with my old Zen Micro on Windows Vista. The device was?recognized?but Windows still couldn't find the driver?despite being?installed from Creative support site. Also the battery seemed not to?charge for some reason. Once I upgraded?device firmware to 2.2?using machine with Windows XP, it'swas immediately recognized, synched and charged on Vista as well. Thanks again.

Similar Messages

  • Zen Micro Vista Incompatibility even with updated firmw

    I own 3 zen micros which are now useless with Windows Vista for lack of driver.
    Your discussion forum moderators are wrong and are misleading many complainers by telling them that
    Driver is nati've in vista as long as firmware has been upgrade on an xp computer to playforsure firmware 2.2.02
    All of my zen micros have been updated to 2.2.02 firmware, and vista still will not recognize. Vista says ?unknown usb device and needs driver?. I tried XP drivers and they also do not work. Again, your moderators are?giving wrong information.
    I demand an answer to this incompatibility problem. I am ready to start posting as many places as I can, ?a warning to stay away from purchasing Creative products for lack of support and why.
    This is totally unacceptable Creative support. I will start posting if I do not get a fix or receive no answer.
    You will lose business.

    mmaky wrote:
    I own 3 zen micros which are now useless with Windows Vista for lack of driver.
    Your discussion forum moderators are wrong and are misleading many complainers by telling them that
    Driver is nati've in vista as long as firmware has been upgrade on an xp computer to playforsure firmware 2.2.02
    All of my zen micros have been updated to 2.2.02 firmware, and vista still will not recognize. Vista says ?unknown usb device and needs driver?. I tried XP drivers and they also do not work. Again, your moderators are?giving wrong information.
    I demand an answer to this incompatibility problem. I am ready to start posting as many places as I can, ?a warning to stay away from purchasing Creative products for lack of support and why.
    This is totally unacceptable Creative support. I will start posting if I do not get a fix or receive no answer.
    You will lose business.
    :smileyvery-happy: dude i have the Zen micro and all i did was plug it in and it was good to go. I have no idea what you are doing wrong. I am sure you don't have the playforsure firmware on the micro. Don't you find it strange that you are the only one complaining about this?
    Message Edited by rasstar on 04-02-200707:57 AM

  • Zen micro vista firmware prob

    i have windows vista and its just not working with my creative if i try to download anyfirmwareit says my player isnt connected so i reconect it and still nothing anyone know wat the problem isis there anyone with windows vista and a zen micro were they both worki've been posting messages like crazy and still i have no anser to how to fix it??mabe i should buy an ipod?

    weezerwer wrote:
    i have windows vista and its just not working with my creative if i try to download anyfirmwareit says my player isnt connected so i reconect it and still nothing anyone know wat the problem isis there anyone with windows vista and a zen micro were they both worki've been posting messages like crazy and still i have no anser to how to fix it??mabe i should buy an ipod?
    You will need the playforsure firmware for vista to recognize the Micro. You will need to update the firmware from a machine with windows XP. Then vista will recognize the your Micro. If your player has the old firmware there is no way to?update it in Vista.?
    Message Edited by rasstar on 04-02-200708:06 AM

  • Zen Micro Vista Compatib

    So, here's my problem. I just got a new laptop with Windows Vista installed on it. (home premium that really matters.) and I want to install my Zen Micro 5GB player. I started off by using the installation disc, which did **bleep** all. Then came on here, and downloaded MediaSource 5 which is "compatible with Vista" that didn't work either.. it said it could not find any compatible devices. So I installed the MediaSource 5 plugin, but it said that I needed to Install mediasource 5 first. So, what the hell is up Is this going to work with vista or not Because right about now I feel like going out and buying an iPod.

    How is it responding now, have you rebooted the system since then or has the installer stopped giving that message? Is the player recognised correctly on the system? Can you access it in for instance Windows Media Player? If it works there, then the update should have completed and it should be fine on Windows Vista too.
    Cat

  • Creative Zen micro (no driver installation?) and cost of 5gb mod

    Just wondering is it ppossible to copy music without having to install drivers? cause i want to use it at uni after i record lectures i want to access the lectures on my uni pc.
    but currently it goes to install a driver and my uni pc's dont allow that
    also is it true that with a recen firmware you can increase the size of the removable hard disk partition?
    Finally if anyone is from australia would you know where the cheapest place to buy the zen micro is?
    i see somepeople posting that they can get it for EUR$39 = AUD$25 which is a lot cheaper than AUD$329-$369 for the 5gb model that i have seen at dicksmith.

    infinityx wrote:Just wondering is it ppossible to copy music without having to install drivers? cause i want to use it at uni after i record lectures i want to access the lectures on my uni pc.
    The Zen Micro v2 firmware supports MTP. If the PCs have Win XP and WMP0 then they use a generic driver built-in to Windows.
    Alternati'vely if you just want to transfer data use the USB mass storage mode.

  • Zen Micro Vista is

    My Zen Micro has firmware version 2.20.05. I want to be able to use it and?its related player software on my Vista machine. I downloaded the latest Creative MediaSource setup file but when I try to run it'sthe CMS5 Web Installer InstallSheild Wizard always stops with the message saying "Setup is unable to find a supported product on your system", whether my player is connected to the pc or not. I realize my firmware is not the absolute latest for the Micro, but it is version 2.xxxxx, apparently with the MTP technology, and from what I understand that's what kind of firmware the Micro has to have to work with Vista. So what's the problem, what's up with the setup saying its unable to find a supported product on the system? What do I need to do?

    Have you tried installing the software while the player is plugged into the computer?

  • Zen Micro and driver installat

    Running Windows XP SP2. Windows Media Player . Zen Micro with latest firmware (2.2.02).Have had this unit for a couple of years, been working fine, other than the software-driver installations have always been a pain in the you-know-what. Re-formatted puter a couple of months ago, did not re-install creative software. So today I decide to reinstall. First I used Control Panel to remove some Creative folders that were still in place for one reason or another. Then went to Creative's website, download latest drivers.Here's what I downloaded:CMS5_BRNR_PCAPP_LB_5_0_3CMS5_MTP_PCAPP_ LB_5_00_36CMS5_NJB2_PCAPP_LB_5_00_22CMS5_PCAPP_LB_ 5_0_38JB3MV2_PCWDRV_US_2_0_00ZCST_PCAPP_LB__04_06? I assumed I would need to install the driver first, which I did (JB3MV2_PCWDRV_US_2_0_00). Then connected zen. The "new hardware" thingy came up, went through the screens, pointed it to the jukebox folder which contained?two .inf files, and neither one would work. Get a message about the files not containing any device info.Going through the screens and pointing to the MTP device drivers gives me a message that the device may not be compatible, so I cancel.At this point, when the device is connected, it shows up in Device Manager as a USB device with the yellow question mark. Mediasource will not recognize it. I try some other things, surf through the support forums here, find a bunch of cryptic posts that, while related,?and after trying a few of the "suggestions", don't do anythinig to solve my problem. Went through the little things in Knowledge Base that creative tells you to do in case of this problem, which only lead back to uninstalling the drivers and reinstalling "by just following the prompts on the screen" (what a great help that is), which takes me back to the beginning of my problem without anything being resolved.So I drag out the original CD, install all the crap on there, and viola!...same problem. I downloaded and tried using JB3MV2_PCWDRV_US__30_03, same results. I'm now getting discouraged with Creative. I've killed two hours this fine morning trying to get this thing going. I have to tell you, your "support"?for this problem, and others, which from the amount of posts on the forums is not a rare one, is very lacking. It seems you have decided to put very simplistic solutions?on your knowledge base, but if the problem is a little more?involved, then you leave it up to the public in the forums to be the ones to figure it out! At this point, I am never going to purchase anything with the words "Creative" on them again!?Just tell me how to get this thing working again, in plain english. Please??

    Now I am having the same problem. I too had a pc problem a few months ago and am now setting up a new/used pc.
    I installed my Zen Nano software and my Zen Vision software but I could not find the Zen Micro Disk. So I downloaded the drivers from this site and installed them. Then I downloaded the new version 2 firmware while I was at it since I had an the version that did not support the audible.com books.
    The firmware install seemed to stall for about 30 minutes, so I cancelled it and started again and the error message said that it "DOES NOT FIND ANY DEVICE" and yet Win XP recognizes I have a device attached.
    PLEASE HELP US CREATIVE SUPPORT STAFF! I have had my Zen Micro for a few years and don't think it is fair that I have to stop using it becasue of this issue. It is only fair we get some timeley support here please.
    Thank You in advance for your anticipated speedy reply.

  • ZEN Micro hard drive crashes my i

    I have a 5GB ZEN Micro. Works perfectly on my PC.
    When I try to hookup the ZEN as a removable hard dri've to my (iMac OS 9.x), I can see or play files. But if I attempt to copy the files to my Mac - or to copy files from Mac to ZEN - it crashes my Mac OS.
    Has anyone discovered a way to make the Mac more compatible with the ZEN hard dri've?

    There is software which you can get for a Mac, but it only runs on OS X 0.3
    Its called XNJB and the link: <a href='http://www.wentnet.com/projects/xnjb/index.html' target=_blank>http://www.wentnet.com/projects/xnjb/index.html[/url]
    Check them out and give support and hopefully they might release a Mac version for OS X 9 and moreMessage Edited by DM on 05-9-2005 :2 AM

  • Zen Micro Hard Drive Fail

    It seems to me that there is a rash of hard dri've failures in the Zen Micro Series. The one main symptom of this is freezing at the CREATIVE startup screen, and disk check and format do nothing. Most of these players seem to have been gifts for Christmas or (insert your holiday here). I just wanted to make this thread so that maybe people could post their details of what happened (i.e. place of purchase, color, etc) so maybe we could figure out a pattern to all this.
    Thanks!
    Agent_Mull
    MY Details are:
    Purchased At: Amazon
    Color: Blue
    Date Of Purchase: 2-0-04Message Edited by Agent_Mull on 2-28-2004 04:42 AM

    Purchased: Gameve.com
    color: white
    got it on christmas could not use it till today
    Have been trying to use it for 3 hours still have not gotten it to work.
    Reloaded the firmware four times (the updated firmware)
    Finally got it to load some songs, then I couldn't get my PC to recognize it anymore. I have three PC's all P4's, quality motherboards, and my work PC none of which are registering the device. It picks it up for a second then freezes and the PC drops the connection the zen micro freezes up and crashes forcing me to take battery out. I researched this for months and although I rarely buy things when they first come out I did it anyway. Now I'm kicking myself, 244 bucks down the tube. I was on hold for hour 0 mins for customer service today when I had to go back to work and of course they aren't open on the weekends or at night. I'm not happy.

  • Zen Micro Hard Drive Buf

    Does the Zen Micro have an anti-skip buffer?

    Lyle_JP wrote:
    For the record, it's not flash memory, it's RAM.
    Thank you! I mis-thought/typed. Nevertheless it provides for a skip free listening experience

  • Zen Micro Software/Driver Confli

    Does anyone know if there are any known software that will conflict with the drivers of the Zen Micro to make it not be recognized.
    I know its not a USB issue, as the player will say its docked, then flash back to the music menu screen. I know the player is not faulty, as its functions all work when not plugged in. I've been able to plug the Micro in once in awhile and it was recognized and Media Explorer recognized it, so that removes hardware issues, which leads me to believe, software conflicts.

    Try using MSCONFIG to reboot in a diagnostic startup. This should only load the basic software.

  • Zen Micro Universal Drive

    I has downloaded in Zen Micro new firmware ZenMicroP4S_PCFW_LB_2__02.exe
    So my Zen Micro recognized on Windows? XP systems, without needing to install drivers or software . It's great!But what I can do if I want to connect my Zen with computer based on Windows 2000 or Windows NT or e.t.c?It did not recognize.Can somebody give advise?

    No I want to transfer mp3 files (and then listen it)like other data not using UMS mode.For example I use Windows Xp but my friend use Wundows 2000.And how I can find a solution for problem to transfer mp3 files on both operating systems?

  • Creative Zen Micro Hard Drive Er

    Hi, my Creative Zen Micro has an hard dri've error. I tried Recovery Mode on it but once it turns on, it doesn't display Recovery Mode but Hardri've error. I was wondering if anyone could help. I was playing a song in wma format and I have the latest firmwire, v..0. As it was playing, it froze on me, I took the battery off to shut it, and when I inserted the battery back in, it came up with the hard dri've error message. Can anyone help me?

    Hard disk error is a serious one unfortunately, and as I'm sure you guessed it means the hard disk has failed in some way.
    You can try the advice here in the Zen FAQ at Nomadness.net at your OWN RISK.
    If you aren't under warranty you can contact Creative Support to see if they will repair it. If you want to try repairing it yourself, taking the risk the hard disk is at fault, then you can follow Rudi Cheow's excellent guide. There's also a thread here at the Zen Nomadness.net forum on compatible dri'ves, and the last page of Rudi's guide also has information on this.

  • Zen Micro/ Vista / Organi

    I have downloaded the organiser for Vista, however I cannot see the songs in the Playing Lists, I can add songs in them but I cannot see them in order to arrange the songs. I was able to do that previously with the Media Explorer. Any clues?

    hey,?I've got the same problem. The computer says my mp3 player isn't connected and when?I try to start the instalation from the cd I've got he says I've got to have a compatibible version... but in the list on this site it says there is a nati've support...so, that doens't help me... (I don't fully understand what a nati've support means)
    I hope someone knows how to solve this problem..
    Linde

  • Zen Micro Hard drive might be d

    Today i was listening to my player and the music froze. When I restarted it sticks on the Creative screen. Did my hard dri've just die? The player is not year as yet so I am hoping they will fix it at no cost.
    Message Edited by rasstar on 07-3-2006 05:04 PM

    Have you try running Cleanup in Rescue mode and see if it helps in anyway.
    JasonMessage Edited by Jason-CL on 08-0-2006 0:45 AM

Maybe you are looking for

  • ITunes doesn't read ID3 tags properly on import

    hi all, today I've added ID3 tags to all my mp3 files, so that they will look better in iTunes and my iPod. I have added information for "title", "artist", "album" and "track #" in ID3v1 and ID3v2.3. Now, when I import these files to iTunes, the ID3

  • How to dispose of preliminary download files for Photoshop Elements 11?

    I just downloaded Photoshop Elements 11 using the Akamai software. I now have big files on my desktop: -- 1.16GB Adobe Photoshop Elements 11 folder; -- 1.21MB PhotoshopElements_11_LS15 extractor file; -- 10.5MB Akamai_NetSession_Installer application

  • Printing messages in invoices and credit notes

    Hi Sap gurus, The printing messages in invoices and credit notes must be changed due to a new law. Does anybody know the transaction used for this, please? Regards, Roger

  • Prepare Cross-Company Code Transactions

    hello,  I am configuring operations  Cross-Company Code Transactions , but when counting in one of the societies fi (for transaction f-02), it doesn't generate the countable voucher in the other configured society.  Please, they could give me a help

  • Error: Service process cannot be confirmed due to its status

    Hi Experts, we want to create a Service Notification (BUS2000117) as a follow-up document of a service order (BUS2000116). The problem is that we receive the following error: Service process cannot be confirmed due to its status *Diagnosis* You canno