Zen Micro with "firmware error". Seeking resuscitation advi

I've posted in several threads as my Zen Micro's health deteriorated and got no advice yet. Hope this time someone figures out what can I do.
I've got a Zen Micro, using it with Windows XP SP2 with WMP 0.
Firmware on player was 2..02 . I started having issues when syncing, it would hang and not finish the session, with the device screen on the "do not disconnect" signal. Read the forum and followed an advice to "upgrade" firmware.
Tried to reload firmware, but the process hanged at the "erasing firmware" screen for a long long time. I disconnected the player. After that, the device won't boot. It goes to the recovery screen after a "firmware error" sign.
If I try to re-upgrade with 2..02 firmware using the PC, the progress advances but at some point it says "firmware upgrade failed".
Tried to roll-back to . firmware. It goes through. It says (showing 2 blue squares of progress) "format completed successfully" then the progress stops and the player remain with the "do not disconnect" signal for a long long time (30 minutes, hour, forever?).
I tried to roll-back to .0 firmware. Message says "please install latest jukebox driver that support your player". I did, but the message stays.
Anyone knows what can I do to load a firmware succesfully?Message Edited by raft on -7-20062:56 PM

Dear Creative!
You screwed the upgrade program a bit, because it is works ONLY IN ENGLISH version on Windows XP. Shame! You are pushing me into the sea of warez...

Similar Messages

Zen Micro PlaysForSure firmware Help

I have Zen Micro with firmware .0.03 and I want to upgrade it, but I don't know which firmware I have to choose
May I choose firmware PlaysForSure 2.00.2e or firmware .02.05 ? Which is better? Or maybe I shouldn't upgrade my Zen and stay with .0.03 (it's stable)
And one more question: The PlaysForSure 2.00.2e firmware is stable and with no problems with it's?
pzdr
m4t30

m4t30 wrote:
but I still haven't answer for: WHY I have to use wmp 0? Only for listening music or maybe for transffering music to Zen?
And still how can I downgrade firmware?
. With the 2.xx.xx firmware it needs WMP 0 for the built in MTP, music management and DRM functionality that is enabled under the 2.xx.xx firmware. You also need XP because WMP0 is not supported under anything else.
2. If you have a .xx.xx firmware version on the player and are under Windows 2000 or anything other than XP the unit CAN NOT be upgraded to a 2.xx.xx firmware. The update will fail or quit if you attempt to update to a 2.xx.xx firmware on anything but XP. If you already have a 2.xx.xx firmware on the player it will nolonger be recognized on a Win2000 or less system. It is only useable on a an XP system at that point.
3. Once you have upgraded to the .02.05 firmware or the 2.xx.xx firmware you can only go back and forth between those two versions ( As long as you are on XP )

Zen Micro PlaysForSure firmware upgrade fatal error - RESOL

First, sorry about poor english!
When i tried to upgrade my Zen Micro to the latest firmware i got the following message: "Creative Zen Micro PlaysForSure Firmware Upgrade: This application only supports Windows XP platform with at least Service Pack installed." The executable name was: ZenMicroP4S_PCFW_L6_2_2_02.exe and yes i have Windows XP SP2 installed on my computer. (and on the other three computers, where i got the exact error message.)Message Edited by kaszast on 0-26-2006 08:37 AM

Dear Creative!
You screwed the upgrade program a bit, because it is works ONLY IN ENGLISH version on Windows XP. Shame! You are pushing me into the sea of warez...

Help: Problem using Zen Micro with Yahoo Unlimited Music Serv

I get a "Error reading device contents: The Data is Invalid" message when I try to synchronize my Zen Micro with the Yahoo music engine. When I first connect my Zen via usb, the Yahoo engine recognizes the Zen Micro but it is unable to read the contents of the Zen prior to my synchronizing. After trying to read my Zen for a while, I get the pop up message described above. I am using version 2..02 zen firmware and version .0..4 of the Yahoo engine.
Has anyone experienced this problem before? Does the Zen Micro actually work with the Yahoo service?
Thanks

Here is the Internet address for one of the forums for Yahoo Music Engine. You might find some possible solutions here.
http://grou<br />
<br />
<br />
p.../yme-feedback/
Best wishes.
luvmyrescuedogs
Message Edited by luvmyrescuedogs on 08-0-2005 07:46 PM

Zen Micro with PC connection Problems and no firmw

I'm running on Windows XP Service Pack 2 and I have Windows Media Player 0.
...and my Zen Micro wouldn't be detected, so I formatted it completely and I tried reloading the firmware. My old Zen Micro with v firmware still connects perfectly well, but Windows just doesn't detect my v2 firmware (now no firmware) Zen Micro.
Advice, please?
:edit:
Windows DOES detect my Zen Micro now...but I still can't do anything with it. It appears as MTP player connected:
http://i3.photobucket.com/albums/y52/bkblade/zen.jpgMessage Edited by bkBlade on 04-25-2006 2:4 AM

bkBlade,
Check this Knowledgebase article SID0053 and make sure the USB registry entry is correct. If you do make changes to the registry base on the Knowledgebase info, then try reloading the v2 firmware again.
Jason

Playlist in zen micro with playsforsure firmw

I'm using a zen micro with the 2..02 firmware... and napster to go... napster to go takes forever to transfer my tracks so usually I just use WMP 0 as a standalone... The question is... why can't I view playlists that I created on the fly inside my player in WMP0.... I've already accepted the fact that you can't delete most of the mandatory Napster playlists without deleting the tracks that they are composed of... and that kinda sux... but I thought that you would at least be able to view the playlists that you created on your player in WMP 0.... Is there something that I'm not doing?

WMP0 does not handle playlists properly, well not at all, so it will not work with any device the way its intended to do. Just got to sit back and wait for the next WMP update that Microsoft releases, but this problem was posted on their KnowledgeBase since March I believe so they are well aware of it.....

Zen Micro with iTu

Hi, is someone can tell if i can use zen micro with iTunes and how do it ? thanks

brotsalami wrote:
as far as i know the itunes agent will not work with the micro. but i don?t know for sure.
It definately works with my wifes MuVo Micro N200. I think it supports all players that has a USB removable dri've feature, so it should work fine with the Micro.

Any possibility to record on a ZEN micro with an external m

hi!
is there any possibility to record on a ZEN micro. with an external mic?
i searched the web and found "things" like that for e.g. the ipod working by the usb port of the palyer.
tia

it would act as if the drive is a built-in DVD burner.
http://www.flickr.com/photos/60081959@N04/7717521136/
Here is what a Lenovo Slim USB portable DVD Burner looks like under iTunes on my X220T
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Need help with firmware error in Zen Mi

Recently I was forced to format my Zen Micro after a failed firmware upgrade. The problem is, now after I download the new firmware the application to install it wont recognise that I have a creative product connected to my computer, even though Windows does. How can I get the firmware application to detect my player? I am running Windows XP Home with all updates installed as well as Windows Media Player .

I had this problem before I upgraded to WMP though, and I cant sync anything since the firmware is wiped. That's why I need some suggestion on how to get the creative firmware application to recognise my Zen Micro, becasue as it stands now it wont.

Full revision list of the Zen Micro's firmware?

/ I've been digging up various firmwares, and I'll be honest and say that because I use an AC Adaptor that 2.2.02 and ..0 are not in my best interests. While I have no tested whether .02.05 retains charge over time I will probably do so tomorrow. I'd like to know the full history of the device so I know where to stand on this. I like to have the 4 hour standby, but not the 'shorter' charge span simply because all Creative did was drop the peak voltage from 4.9V (Li-Po can take up to 4.235V) to 4.2V. Granted the slope of the charging curve gets very flat at that level, but I do feel that it is best to inform geeks so they know what to expect.
Version (Recovery Mode version)
..0 (0.0.65)
2.2.02 (0.0.65)
.0.02 (0.0.63) (Pulled off due to complaints)
.02.05 (0.0.58)
2.00.2 (Cannot be installed)
I know I missed a few, but because the Zen Micro is past its life cycle I doubt there will be any customizations to the device.

what problems?
Spending time on a support forum like this, that covers the full gamut of the customer base, you are going to see probably 80% of the posts from folks having problems ranging from minor pilot error to real hardware failure. The 20% with tips, kudos etc are all in the minority and will not be very visible.
Creative has probably sold over 5 million Micro's since inception. There are definitely going to be problems with that many units in the general population. And some of the problems have been real issues such as the battery drain and the issue of headphone jacks. The latest firmware v . has fixed the battery problem, and on the 3 Micros in our household we are all seeing over hours playback time, excellent battery hold time, good charging characteristics etc etc. The headphone jack issue seems to have become a lot less of a topic the past month or so. Noting that Creative sold probably about .5 million of the earliest Micros, and these were the units that seemed to have headphone jacks go bad, if at all, all the later products may have enough of a redesign that the jacks are OK. Certainly we are fine over here with the new revisions.
The pluses of the Micro are many, and the diminuti've size and excellent UI makes using this player a pleasure. Audio quality is excellent, and other than sheer output power is right up there with the JB3 (IMO the best ever mp3 player - irregardless of brand).
Hope this rambling note can help you with your decision.
jake

Zen Micro V2 Firmware probl

Hello-
I've had the Zen Micro for a few days and I loved it, until I upgraded to the new firmware (2.002 - PlaysForSure functionality) which makes it auto sync w/ WMP 0. I was excited about the possibility so I went ahead and upgraded and I have had multiple problems with the new firmware release. I was wondering if anyone else had encountered these, or if they are bugs that need to be worked out.
First, after upgrading I synced with WMP 0 and certain songs would transfer to 00% then would hang and I would get an error message in WMP 0 saying: The I/O operation has been aborted because of either a thread exit or an application request. Error code: 800703E3. This never happened before. After removing the songs that would cause this problem, I no longer get this message, but the prob still must be attributed to some change that occurred with the upgrade since the faulty songs transferred perfectly before upgrading.
Second, and more importantly, is the fact that songs are not being filed correctly on the Micro since the new firmware has been installed. All songs that do not contain information in the "Album" field of the ID tag are unaccessible now. If you select "Artist" in the Micro, the only songs available are those that are categorized by album. With the prior firmware, songs not tagged w/ info in the album field would automatically go in a section called <Unknown>. Now, they are not accessible at all. If I have an artist w/ one song on the Micro and the song doesn't have info in the album field on the ID tag, the artist is available but after selecting it I come to a blank screen on the Micro. I have also attributed this to the new firmware b/c I've reinstalled the older one and the filing system is back to normal and is fully functional.
If anyone has encountered these probs or come up w/ solutions let me know. I'd love to be able to utilize the auto sync features of WMP 0 but for now I'll manually sync and keep things in order on the Micro's side of things w/ the older firmware version. Thanks for any help/input.
Take care,
Craig

Bear with me as I lay out the problems/sequence of events:
- Got excited over the MTP support and upgraded. My laptop stopped recognizing the Zen
- Creative support thought that my MP0 maybe hosed; so I rollback and install MP0 again. No resolution.
- Went into to 'rescue mode' and wiped the disk clean
- Installed the old firmware; my laptop recognized the Zen
I pressed on and connected my Zen to a desktop and upgraded the firmware to MTP support (v2.x)
- I was able to sync with MP0 but frequently experienced problems with 'hang' during sync after 00%
- I disconnected the unit and MP0 aborted the sync
- Reconnect and sync would hang at the exact same song. Further, I noticed the following:
- Songs would sync up very fast (noticed around 800KB/S)
- The problem song would experience startup problems and would hang after reaching 00%
- I deleted the 'problem' song (which plays fine in MP0) and 'sync' continued without problems
- Created a playlist in MP0 which synced OK; but the Playlist is missing in Zen!!
Summary:
I think Creative released the f/w too early.

Zen Micro / USB Firmware prob

Okay, this time I ran into a serious problem and I was quite close to get really mad at Creative... This is my third Zen Micro player and my waranty has run out and I thought, this time I am really gone for..
So, what happened is, I took my mp3 player with me. Nothing special? Oh well, when I switched it on, it showed the starting screen and switched off again. Tryed again and it showed me that the battery was empty. I plugged the player into the recharger but hours later, turning the player on resulted in the same..
Okay, I thought maybe there is some problem and formated everything. Now it told me, firmware error and started into recovery mode on its own. Good I guessed, reuploading the firmware would solve the problem.. (P4S 2..0)
It was not this simple.. I connected the player with the USB to the computer, but some minutes after connecting it, it told me "there is a problem with the USB device" and the player was not recognized any more. Starting the firmware update program resulted in "the player is not connected to your computer" even if it was..
A week later, today I solved the puzzle. It was a pure coincidence, after I tried the american version of the firmware update program which only told me "the battery needs to be charged before a update can be done" I tried the old PDE ..0 Firmware program! **bleep** and it worked!! It recognized the player and let me "downgrade" the firmware to ..0! I hope that helps anyone encountering the same problem, I really thought my player is now really gone mad..
kr

Okay, this time I ran into a serious problem and I was quite close to get really mad at Creative... This is my third Zen Micro player and my waranty has run out and I thought, this time I am really gone for..
So, what happened is, I took my mp3 player with me. Nothing special? Oh well, when I switched it on, it showed the starting screen and switched off again. Tryed again and it showed me that the battery was empty. I plugged the player into the recharger but hours later, turning the player on resulted in the same..
Okay, I thought maybe there is some problem and formated everything. Now it told me, firmware error and started into recovery mode on its own. Good I guessed, reuploading the firmware would solve the problem.. (P4S 2..0)
It was not this simple.. I connected the player with the USB to the computer, but some minutes after connecting it, it told me "there is a problem with the USB device" and the player was not recognized any more. Starting the firmware update program resulted in "the player is not connected to your computer" even if it was..
A week later, today I solved the puzzle. It was a pure coincidence, after I tried the american version of the firmware update program which only told me "the battery needs to be charged before a update can be done" I tried the old PDE ..0 Firmware program! **bleep** and it worked!! It recognized the player and let me "downgrade" the firmware to ..0! I hope that helps anyone encountering the same problem, I really thought my player is now really gone mad..
kr

Zen micro 5gb firmware prob

i have owned my zen micro for over 2 years, about a month ago my zen started freezing so i decided to reload the firmware. i accessed recovery mode fine and then clicked the reload firmware option. i had the latest firmware downloaded but i cant get the upgrade program to work. it says my zen is not connected even though it is. i really dont want to buy another player, is there a fix? i read that there is an issue with wmp but i didnt know if it was true. i do have wmp on my computer but i wasnt aware that there were any problems with it.
i have emailed creative tech support and while they replied quickly their suggestion did not help (get rid of all startup programs). im hoping someone in the forums has a suggestion.
help!
thanks

I HAVE FOUND A FIX
taken from a microsoft website
Rolling back to a previous version of the Player
Windows Media Player is a feature of the Windows operating system and cannot be removed entirely. However, in Windows XP, you can roll back to the version of the Player that was previously on your computer.
You must be logged on as an administrator or a member of the Administrators group to perform the following procedure.
Disconnect any portable music or video devices that might be attached to your computer.
2.
Click Start, and then click Control Panel.
3.
In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
4.
Click Windows Media Player , and then click Remove.
If Windows Media Player is not displayed in the list of currently installed programs, then try the following:
At the top of the list, select the Show updates check box.
2.
In the Windows XP - Software Updates section, click Windows Media Player , and then click Change/Remove.
5.
In each of the two confirmation dialog boxes that appear, click OK.
6.
When the rollback process is complete (it might take several minutes), click Restart.
7.
Click Start, and then click Control Panel.
8.
In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
9.
Click Windows Media Format Runtime, and then click Remove.
If Windows Media Format Runtime is not displayed in the list of currently installed programs, then try the following:
At the top of the list, select the Show updates check box.
2.
In the Windows XP - Software Updates section, click Windows Media Format Runtime, and then click Change/Remove.
If you installed a non-US English version of Windows Media Player , the instructions in the dialog boxes that are mentioned in steps 9, 0, and might appear in English.
0.
In the first confirmation dialog box that appears, click OK.
In the second confirmation dialog box that appears, select the Do you want to continue with the rollback? check box, and then click OK.
2.
When the rollback process is complete (it might take several minutes to complete), click Restart.
3.
Click Start, and then click Control Panel.
4.
In the Category View of Control Panel, click Add or Remove Programs, and then click Remove a program.
5.
Click Microsoft User-Mode Driver Framework Feature Pack .0.0, and then click Remove.
6.
Follow the instructions that appear in the Software Update Removal Wizard.
If the Wudf0000 confirmation dialog box appears, click Yes to continue. When the software removal process is complete (it might take several minutes to complete), click Finish.
Note If you remove Windows Media Player and the Windows Media Format Runtime, and then encounter error C00D27D ("A problem has occurred in the Digital Rights Management component. Contact Microsoft product support."), you might be able to resolve the problem by installing the Windows Media Format 9.5 Runtime. For information about installing the Runtime, in the Microsoft Knowledge Base, see article 8922, "Update for Windows Media Digital Rights Management-enabled players."
You might not be able to roll back to a previous version of the Player if the hidden folder $NtUninstallwmp$ is deleted from your computer. Some non-Microsoft programs (such as CCleaner) delete this folder in an attempt to remove unwanted files from your computer.
then download the latest firmware file and run it.
WHAT IS VERY IMPORTANT TO KNOW
when i ran the update program it showed all the bars filled but then said the firmware update failed. apparently it didnt fail cuz its working right now. after u do all this u can reinstall wmp to sync ur files.
so heres the ste
ps.
uninstall wmp and the framework package
do the firmware update
reinstall wmp
i dont know if anyone ever suggested this but it worked for me
good luck everyone!
ps.
if i find that this fails later on then it is definately an issue with creatives firmware. ill keep u all posted

Creative Zen Micro with a ! on its side: not work

I had the Zen Micro installed in my computer but it stopped working. If I now connect the portable device nothing appears, and it tells me that I have to install the drivers. I put the cd in, but at some point it gives me back an error message saying that the .inf files refers to a service that doesn't work. What am I supposed to do?Does it have anything to do with a usb problem?

ANY IDEAS?

Zen Micro with Windows 2000 Not Recogni

Help!! My computer operating Windows 2000 no longer recognizes my Zen Micro. It used to but no longer. I have searched through all the help loading everything under the sun with no success. My Micro is operating with Version ..0 that I understand should and has worked in the past with W2000.
Please help. This is ridiculous - no Zen here.

I finally figured that out. With ME or 2000, I needed to:
) download the version firmware to my memory stick
2) take the player and V firmware to an XP machine
3) have the older firmware flashed into the player
4) reinstall the player on the ME machine
I did all that, had Best Buy do the reflash, and it's working now.
A few more questions:
If I later update the computer to an XP, any problem with reinstalling Version 2 firmware (other than loosing stored data in the player)?
Exactly how many features are not supported by version firmware? I'm aware that it won't support subscription services, e.g., Napster To Go, and audible format. Are there any other missing I should be aware of?
TIA
JRC

Zen Micro with "firmware error". Seeking resuscitation advi

Similar Messages

Maybe you are looking for